Inserting song breaks into a cdr/vinyl using GarageBand?

I'm using a stand-alone cd recorder to record my vinyl records onto cdr's. I would then like to use a built-in application (I have iLife on a new mac mini) to break up the songs and then load into iTunes as an album.
It's a lot easier on the cd recorder to just drop the needle and record sides 1 and 2 as songs without hitting the song breaks on the fly. It would also be good to be able to remove the needle drop and lift off as well to clean things up.
Is this possible on GarageBand or maybe iDVD?
Thanks in advance,
RickMac

If you record into GB you can use the Cycle Region to export a portion of your recording (e.g. one of the songs). The move it to export another section. That way iTunes will have the songs separated. However, you will need to rename the songs in iTunes.

Similar Messages

How do you insert an image into a google map using a macbook?

I am trying to put images into a Google map using my MacBook, but cannot seem to find any help. How do I insert an image into my Google map using my MacBook?

Nothing complicated with your menu - very clear "ADD Image" but my menus are not as simple. Everytime I need to add an image I spend 5-10 minutes searching again. Wonder why so hard. I generally find Acrobat menus cryptic and unclear and I am big Adobe fan - use Illustrator, Photoshop, Dreamweaver, Premier, Fireworks etc - but Acrobat menus are like calculus in the dark.

How to insert blank page into pages document when using word processing mode?

I've recently created a 50+ page document using Pages '09. I started the document using word processing mode. Now, when I view in thumbnail mode and try to insert a blank page somehwere in the middle of the document, it won't allow me to select where I want. It just selects all the pages, as thought they are one section. I believe this is because I am in word processing mode. My question is, can I convert the document to layout mode so that each page represents it's own section, without losing what work I've already done? And if so, how?
The document is entirely text boxes and images, so I don't have any need for word processing space. I just need new pages to act as blank templates for the text boxes and images I create.
Is it possible to keep all my work as is, and convert the document to layout mode vs. word processing mode?
Thanks!

It just selects all the pages, as thought they are one section.
That's because they are one section. You must insert section breaks to separate them. There is no need to use page layout which does make each page a separate section. You have to manually add each page & use text boxes or other containers for the text & link the text boxes.

How to insert a parameter into MySql from JSP using bean

Hai.........
The files i hav used are: DbConnection.java, LogBean.java, login.jsp, checkUser.jsp, existingUser.jsp, newUser.jsp...................
I hav problem in newUser.jsp................................................
ie: plz giv an appropriate code for this code:.........................................
resultSet = connectionBean.execUpdate("insert into userLogin values('"+uName+"','"+pWord+"') ");
Message was edited by:
jaseemkhan

Here is the code fragment.
File file = new File ("c:\\t.gif");
FileInputStream in = new FileInputStream (file);
int len = (int)file.length();
PreparedStatement pst = null;
pst = conn.prepareStatement ("insert into blob_table values (1, ?)");
pst.setBinaryStream (1, in, len);
pst.executeUpdate();
pst.close();
conn.commit();

Insert line break into .txt file

Alright, so I am writing out to a simple .txt file, and I
need to force a line break in it. My immediate thought is to use
"\n" as that is a line break. So, I write it out to the text file,
and instead of a line break, I see the "complex character" symbol
(you know, that square that shows up with unknown characters). I
have tried the various ASCII values to no avail, tried \r, even
tried copy-pasting a line break in from notepad. Nothing seems to
be working for me. How do I do this?
_logFile = "\n";
stream = new FileStream();
stream.open(file,FileMode.WRITE);
stream.writeUTFBytes(_logFile);
stream.close();

in windows use "\r\n"
i.e. _logFile = "\r\n";

Trouble inserting songs/media into iAuthor

When I drag my media (song which is in AAC format) into the page, it seems like it's a dead action. Nothing clicks, nothing snaps into place. The only visual difference I can see is that there is a slight bullseye looking image on the page. But once you click the content, that disappears. The "inspector" and "media" tools seem to be stupid and worthless.
Basically, I can't figure out how to make it work and it seems like it should be a lot easier. Ultimately, I want to add a song so it can be clicked and start playing.
Thanks

I traveled for several days and haven't been able to respond or keep troubleshooting. But thanks so much for the help!
It's still a problem. I do have that menu but when I click Media it takes me to the widget which isn't helpful:
Thanks, I still need help!

Insert single coloum into 3 different coloum using a simple query

Hello All.
My problem is that.i have a table in which 3 coloums (Empno,Amounts,Codes) and table is like that.
Empno Codes Amounts
1 100 100
1 101 200
1 102 100
2 100 250
now i want to insert this data in a table like that...
empno amount(code 100) amount(code 101) amount(code 102)
1 100 200 100
so Please tell how to write a query for this problem.
Thanks ..
Edited by: hims on Sep 6, 2008 2:03 PM

Something like that :
SQL> with tbl as
2 (select 1 id, 100 c1, 100 c2 from dual union all
3   select 1 id, 101 c1, 200 c2 from dual union all
4   select 1 id, 102 c1, 100 c2 from dual union all
5   select 2 id, 100 c1, 250 c2 from dual)
6 select id, sum(decode(c1,100,c2,0)) c100, sum(decode(c1,101,c2,0)) c101, sum(decode(c1,102,c2,0)) c102
7 from   tbl
8 group by id;
        ID       C100       C101       C102
         1        100        200        100
         2        250          0          0
SQL>Nicolas.

Inserting Multiple Rows into Database Table using JDBC Adapter - Efficiency

I need to insert multiple rows into a database table using the JDBC adapter (receiver).
I understand the traditional way of repeating the statement multiple times, each having its <access> element. However, I am just wondering whether this might be performance-inefficient, as it might insert records one by one.
Is there a way to ensure that the records are inserted into the table as a block, rather than record-by-record?

Hi Bhavesh/Kanwaljit,
If we have multiple ACCESS tags then what happens is that the connection to the database is made only once. But the data is inserted row by row.
Why i am saying this?
If we add the following in JDBC Adapter..logSQLStatement = true. Then incase of multiple inserts we can see that there are multiple
<i>Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','1000')
Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','2000')</i>
Doesnt this mean that rows are inserted one by one?
Correct me if i am wrong.
This does not mean that the transaction is not guaranted. Either all the rows will be inserted or rolled back.
Regards,
Sumit

How to insert an in-line image into a table cell using Pages on OS X?

How can I insert an image into a table cell using Pages (OS X) without it becoming the cell background? I want it to be a regular in-line image, but can't figure out how to do this for the life of me. Thanks!

Welcome to Discussions.
To insert an image into a cell, select the cell, then go to the Graphics Inspector and from the Fill drop down choose Image Fill and then select then image you want. You can now select from a new drop down how you want the image to fit.
Walt

How can you insert "Page Break" in a pdf file so you will specify the pages

How can you insert "Page Break" in a pdf file so you will specify the pages

How / from what was the PDF originally created? It would be easiest to insert page breaks into the original document, then recreate the PDF.

Kernel Panic when using Garageband with Blue Snowball USB mic

*HI ALL,*
*I purchased Mac Pro recently about 3 weeks ago. I am on the latest updates including the recent firmware update. However whenever I use garageband with external USB mic(Blue Snowball) my Kernel Panics and OS freezes and forces me to Power On again. It happened 20 times so far in few hours.*
*I opened garageband first time today after bought this external mic from apple store. I did not use garageband without this mic plugged into USB, I only used garageband with MIC plugged in and in couple of minutes to 5 minutes of using garageband the Kernel Panic occurs. Need your help please. Here is the message I get after login again which I reported consistently to Apple. Any immediate help is appreciated. I use iMove, iPhoto and other apps without any problem. Harddisk verification went o.k.*
Sun Apr 6 22:13:35 2008
panic(cpu 7 caller 0x001A8C8A): Kernel trap at 0x004209d5, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x0000000c, CR3: 0x013fe000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x0ea7c3c0, ECX: 0x1059f4f0, EDX: 0x85ccfb8c
CR2: 0x0000000c, EBP: 0x85ccfb08, ESI: 0x0ea7c3c8, EDI: 0x0ea7c3d0
EFL: 0x00010202, EIP: 0x004209d5, CS: 0x00000008, DS: 0x11ac0010
Error code: 0x00000002
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x85ccf8f8 : 0x12b0f7 (0x4581f4 0x85ccf92c 0x133230 0x0)
0x85ccf948 : 0x1a8c8a (0x461720 0x4209d5 0xe 0x460ed0)
0x85ccfa28 : 0x19ece5 (0x85ccfa40 0x4256f6 0x85ccfb08 0x4209d5)
0x85ccfa38 : 0x4209d5 (0xe 0x85cc0048 0x10 0xe920010)
0x85ccfb08 : 0x42028d (0xea7c3c0 0x85ccfb8c 0x0 0x0)
0x85ccfb58 : 0x420c0e (0xea8b700 0x420978 0x85ccfb8c 0x0)
0x85ccfba8 : 0x6055d9 (0xea7c3c0 0x0 0x85ccfc08 0x615b08)
0x85ccfc08 : 0x609a11 (0xe92a000 0xeed0240 0xf56bff 0x0)
0x85ccfc68 : 0x86334bde (0x13c56800 0xeed0240 0xf56bff 0x0)
0x85ccfcd8 : 0x86334ddd (0xfbe4400 0x2 0x1 0x14)
0x85ccfcf8 : 0x86335056 (0xfbe4400 0x14 0xf7f4a80 0x7c79d6)
0x85ccfd38 : 0x86335156 (0xfbe4400 0x54 0x0 0xf7f4a80)
0x85ccfd88 : 0x9f2e64 (0xfbe4400 0x8634d000 0x862c1010 0x110a)
0x85ccfdf8 : 0x9eec9f (0xfd03600 0x10506588 0x110a 0x3ea740)
0x85ccfe68 : 0x9ee169 (0x13d7d000 0x110a 0x13c4c940 0x13dbab7c)
0x85ccfea8 : 0x43c47e (0x13d7d000 0x110a 0x55f 0x1)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBAudio(2.5.4b4)@0x86326000->0x8634cfff
dependency: com.apple.iokit.IOAudioFamily(1.6.4b7)@0x9e4000
dependency: com.apple.iokit.IOUSBFamily(3.0.8)@0x5ff000
com.apple.iokit.IOAudioFamily(1.6.4b7)@0x9e4000->0x9fafff
dependency: com.apple.kext.OSvKernDSPLib(1.1)@0x9e1000
com.apple.iokit.IOUSBFamily(3.0.8)@0x5ff000->0x626fff
BSD process name corresponding to current thread: GarageBand
Mac OS version:
9C7010
Kernel version:
Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)

I've been getting a number of kernel panics when using USB Mics with Skype, though I have not experienced any crashes when using Garageband.
The crash report cited the AppleUSBAudio driver as the culprit. Here's the set up:
MacBookPro Core2 2.66 15"
Mac OS X 10.5.2
Blue Snowflake USB Mic, Blue Snowball USB Mic
Skype (latest rev - 2.7.0.257)
AppleUSBAudio.kext version 2.5.6b3
Seems to be a lot of crashiness with USB Audio in 10.5.2 - let's hope we see a patch soon

Inserting multiple columns into database using dbtool set

I have a labVIEW program that is currenly simulating voltage and a current signal using the DAQ Assistant. I'm using the database connectivity toolset. I am currently able to insert one signal into the database converted to a float(I can insert both into the same column as bianary but it needs to be stored as a usable format and in seperate columns.)
The problem I am having is at the DB Tools Insert Data block. I have the connection, dbTable, error code, and create table boolean being passed into it. Where I am a little lost is how to set the columns I want to store the multiple signals into.
If someone could break that part down for me that would be great. In short, I want to store voltage(channel0) and current(channel1) from the DAQ Assistant into their own respective columns in the db.
Message Edited by DonPoulson on 07-10-2007 11:04 AM

Don,
This particular forum is specific to TestStand, not LabVIEW or Multifunction DAQ. You may have a better chance at responses by posting to either of those forums rather than here.
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

Insert track (song) breaks in a long compilation

Hello everyone.
For about a month now, I have been messing with GB and even tried Audacity to find a solution to my problem:
I have many single, long song DJ compilations on iTunes that consist of different songs smoothly transitioning into the next one to make an hour long single song. When I playback on computer or iPhone, no problem, I can quickly move from one song to another. However when I burn onto a CD and play in the car, I have to hold the forward button FOREVER to get to parts I want to hear.
How do I insert breaks into the long song, so when I burn onto CD, I can just hit next track and have 15 (or so) single songs to work with?
I would be eternally grateful for any help.

HangTime, I think I found what you were saying. I went to Show Podcast Track, than added appropriate markers.
Now do I just export this song (12 songs) to iTunes by means of: "Share Podcast to iTunes"? I tried that, but got a message that it cannot be exported as enhanced version.

How can I use multiple row insert or update into DB in JSP?

Hi all,
pls help for my question.
"How can I use multiple rows insert or update into DB in JSP?"
I mean I will insert or update the multiple records like grid component. All the data I enter will go into the DB.
With thanks,

That isn't true. Different SQL databases have
different capabilities and use different syntax, That's true - every database has its own quirks and extensions. No disagreement there. But they all follow ANSI SQL for CRUD operations. Since the OP said they wanted to do INSERTs and UPDATEs in batches, I assumed that ANSI SQL was sufficient.
I'd argue that it's best to use ANSI SQL as much as possible, especially if you want your JDBC code to be portable between databases.
and there are also a lot of different ways of talking to
SQL databases that are possible in JSP, from using
plain old java.sql.* in scriptlets to using the
jstlsql taglib. I've done maintenance on both, and
they are as different as night and day.Right, because you don't maintain JSP and Java classes the same way. No news there. Both java.sql and JSTL sql taglib are both based on SQL and JDBC. Same difference, except that one uses tags and the other doesn't. Both are Java JDBC code in the end.
Well, sure. As long as you only want to update rows
with the same value in column 2. I had the impression
he wanted to update a whole table. If he only meant
update all rows with the same value in a given column
with the same value, that's trivial. All updates do
that. But as far as I know there's know way to update
more than one row where the values are different.I used this as an example to demonstrate that it's possible to UPDATE more than one row at a time. If I have 1,000 rows, and each one is a separate UPDATE statement that's unique from all the others, I guess I'd have to write 1,000 UPDATE statements. It's possible to have them all either succeed or fail as a single unit of work. I'm pointing out transaction, because they weren't coming up in the discussion.
Unless you're using MySQL, for instance. I only have
experience with MySQL and M$ SQL Server, so I don't
know what PostgreSQL, Oracle, Sybase, DB2 and all the
rest are capable of, but I know for sure that MySQL
can insert multiple rows while SQL Server can't (or at
least I've never seen the syntax for doing it if it
does).Right, but this syntax seems to be specific to MySQL The moment you use it, you're locked into MySQL. There are other ways to accomplish the same thing with ANSI SQL.
Don't assume that all SQL databases are the same.
They're not, and it can really screw you up badly if
you assume you can deploy a project you've developed
with one database in an environment where you have to
use a different one. Even different versions of the
same database can have huge differences. I recommend
you get a copy of the O'Reilly book, SQL in a
Nutshell. It covers the most common DBMSes and does a
good job of pointing out the differences.Yes, I understand that.
It's funny that you're telling me not to assume that all SQL databases are the same. You're the one who's proposing that the OP use a MySQL-specific extension.
I haven't looked at the MySQL docs to find out how the syntax you're suggesting works. What if one value set INSERT succeeds and the next one fails? Does MySQL roll back the successful INSERT? Is the unit of work under the JDBC driver's control with autoCommit?
The OP is free to follow your suggestion. I'm pointing out that there are transactions for units of work and ANSI SQL ways to accomplish the same thing.

Can you use ESB to insert multiple records into a Database

We have an XML file that has a Parent/Child relationship.
In situation 1 we have a single parent record in the xml file. We can insert the record into the database successfully.
In situation 2 we have a parent and a an associated child record. By using a filter expression to identify the existence of the child record we can route to the first DB Adapter to insert the parent then to the second DB Adapter to insert the child.
Is this final scenario logical and also possible.
Situation 3 we have multiple child records associated to a single parent. So we would first insert the parent record then insert all the child records.
Thanks

I use PL/SQL for this if you are using Oracle.
Have a look at this post, it is for AQ but the concept can be used for PL/SQL
Re: Can I pass a pl/sql table as a parameter from a database adaptor
I will send you an example
cheers
James

Inserting song breaks into a cdr/vinyl using GarageBand?

Similar Messages

Maybe you are looking for