Inserting video inside a slideshow

Hi,
Is there a way to insert html to embed a video inside a thumbnail slideshow?
Thanks!
UPDATE: Found answer: http://forums.adobe.com/message/5286967

There are a number of ways.
The easiest is probably just to create a title. Put a black rectangle covering the entire title, then a big white circle in the middle. Hold the shift key while drawing the circle to keep it round.
Put it on the track above your video.
Put the Track Matte Key effect on the video and in the Effect Controls panel, tell it that the matte is on the track above the video. (Usually the video is on track one and the matte is on track two in simple sequences). Use the Luma setting.
There are other ways that involve alpha instead of luma. But you will probably be happy with this.

Similar Messages

Trouble inserting video inside slideshow widget

Hi there,
I am trying to add a youtube video inside the Lightbox widget. I have tried using the social widget/youbube and using the iFrame code from the youtube video and placing it inside the slideshow widget.
I followed an older tutorial online, but I can't seem to make this work using Muse CC.
What I want to do is create a small button, which in this case would be a small dot instead of the thumbnail, then once clicked a video would open.
If anyone can help me solve this I would be grateful.
Thank you

1. Select the Basic Composition widget. (see attachment)
2. Make sure 'Hide All Initially' is checked (modify any other options like fill outline etc.)
3. Select the YouTube widget and slide it into the Basic Composition box. See attachment (box outline will highlight in blue to indicate the widget is inside)
4. Make sure 'Auto Play' is checked in the YouTube options.

Is it legal to use the iPhoto slideshow video inside the third party iPad enterprise application?

Hi,
we are developing one enterprise application specifically for iPad.Kindly advise me is it legal to use the iPhoto slideshow video inside the third party iPad enterprise application (slide show with images)?
Thanks in advance.

Thanks Terence for your reply. I mean for "the iPhoto slideshow video" is : I have collection of my own images , using iPhoto software i created a slideshow based on 'origami' theme and exported as a video file. Can I use that video in my enterprise iPad application?
Thanks.

Insert video into different shapes?

Hi Guys
Is it possible to insert a video inside quote marks as shown here? I have inserted a video within this shape but when I press play on the iPad it plays in it's original size – rectangle.
Any help appreciated!
Cheers
Gemma

Thanks Johannes.
I have tried this and it is now working for me!
I have placed my slideshow over the video. It has two states (identical). Maybe my settings could be wrong on my slideshow?
Do I autoplay ot tap to play?
Many thanks
Gemma

Can I Trick Presenter to allow me to Insert Video By Using Coding ?

I am currently evaluating Abobe Presenter 7.0.7.   It has the tools to allow me to make by presentations, but the major limitation for me is the fact that I must manually insert video by using the "Adobe Presenter" toolbar.   I need a means of automating the process of insert the video into the power point slides without doing it by hand using the "Adobe Presenter" toolbar.   I am currently using flv files. Can anyone help ??
This is what I have noticed so far:
1)     Inorder to publish the presentation, there is a folder created with the same name as your power point presentation. Within that folder is a folder called "Assets".   Inside this folder you will file various flv files names like "v20110123_031_272_1_24357".   The original flv filename is "v20110123_031.flv".    I believe this is where the video file is placed when I use the "Adobe Presenter" insert video tool.
2)     I also noticed that the power point slide has an object called "Shockwave Flash Object", and when I select this and display the "Properties" window, I see the following that seems important: a) Embed Movie = True, b) Loop = False, and c) MovieData = file path of video
3)     I used the "more controls" toolbar that is part of power point and selected "Shockwave Flash Object" and scaled in a box on one of my slides.   I changed all of the properties to what I indicated in #2 above. The "MovieData" file path was change to the correct path I the "Adobe Presenter" insert video did, but I change the flv file name and duration to the correct side.   I made a test case and insert the video in another presentation and copied it, but I made sure the pathname is correct for my test.
3)     I am able to publish without any errors, the the inserted flv does play.   I assure its not working correctly.
Does anyone know what I can try to get something like this to work (without using the "Adobe Presenter" invert video) because I am abvle to write MS VBA Code to generate everything else.
All my power point slides are generated by using MS VBA code completely because I have many of these to do each week for over 18 weeks.
I would appreciate any help or suggestions of other tools that I can use.
I believe Captivate also has this issue where I have to do this manually.
Thank You,
G

I don't really know too much about AutoIt Tool.   This is what I tried:
1)     I used MS Access VBA Code to open my power point slides and use the SendKeys to open various menu in the power point slides.   I do see the menu called "Adobe Presenter".
So I tried using the SendKeys "%{P}", True    which sends out the command Alt+P which is suppose to open the "Adobe Presenter" drop down menu.   It didn't do that but open the "View" Menu and select the "Header and Footer" menu.
So I tried using the SendKeys "%{I}", True   which sends out the command Alt+I which is suppose to open the "Insert" menu drop down and it works.   For some reason it didn't work for the "Adobe Presenter" menu.
2)     When I just open power point and type Alt+P, it does open the "Adobe Presenter" drop down menu.
Any idea ??     Do you think the AutoIt may work better for me ???
Thank You,
G

I can not daowload to the I movie a DVD with video inside

I am unable to copy Dvd made by mi
in to IMOVIE ....
i check the dvd on a tv via DVD,   and is working fine
i can download photo with music no problem    but not    a dvd   with video inside
thank you     TONY

You need to rip the DVD to mp4 before importing.
Download Handbrake (free, Google it).
Insert the DVD to your computer. DVD Player will come up. Quit it.
Open Handbrake. Rip the DVD to a file on your desktop.
Import that file from your desktop into iMovie.

Bad video/good audio--slideshow?

I took a video of my daughter's high school musical. The audio came out fine but the video isn't so good. I'd like to take some still photos that I have and merge them with the audio from the camera to make a slide show. Can anyone walk me through the process?

If what you want to do is have the video continue running but put photos over some of the bad video, follow these instructions from iMovie Help:
Inserting video clips or photos in a passage while maintaining running audio
You can paste a new video clip or photo over an existing clip while retaining the audio from the original clip. The video cuts away to a new picture, but you continue to hear the sound from the original clip.
To replace images in a clip while maintaining running audio:
Choose iMovie HD > Preferences, and then click General.
Select the "Extract audio when using Paste Over at Playhead" checkbox.
Select the video or photo that you want to insert.
Choose Edit > Cut or Copy.
Do one of the following:
To paste the entire video you selected in step 3, position the playhead at the first frame to be replaced. When you paste the clip, it will replace a portion of video equal to its length.
To paste over a specific segment of your movie, select the part of the video clip you want to paste over. (To learn more about selecting part of a video clip, see Related Topics below.)
If the video you're pasting is longer than the selected frame range, the excess video will not be pasted. If the video you're pasting is shorter than the selected frame range, the extra space will be filled with a color clip (or the still image, if you paste a still image).
Choose Advanced > "Paste Over at Playhead."
The audio track of the original video is retained and appears in audio track 1 of the timeline viewer.
This should give you a nice smooth movie with interspersed photos with the video.
Be patient, the extraction of the audio may take a while!
If you want to ENTIRELY replace the video and just keep the audio, you have a couple of methods.
1. Extract the audio from the entire movie. May take a while. Then, delete the video track, keeping the extracted audio track. Add your photos to the video track, adding transitions, adjusting the timing of the photos.
2. Share the audio as an AIFF file, create a slideshow in iPhoto and use the audio track as your music for the slideshow. Start by selecting 'Share' to QuickTime, then choose compress movie for 'Expert Settings.' Then 'Share' and when the next window (save exported file as) appears, go to the dropdown menu buttons. For Export: select 'Sound to AIFF' and for Use: 'Default Settings.'
Just the audio will be saved as an audio file.
Then, open a new iMovie project, choose timeline view, drag in the audio file, and add your photos. You will have to see what effect you want with transitions, timing of the photos, Ken Burns effects, etc.
If you want to be very professional and actually sync the audio to the photos in some systematic way, have a look at Karl Petersen's thorough explanation here
Good luck....sorry that the original video was not good :_(

How can I get an inserted video (FLV) in Presenter 7 to stay on the screen once it has finished pla

How can I get an inserted video (FLV) in Presenter 7 to stay on the screen once it has finished playing? Right now it disappears once it is done. I'd like it to remain on the screen, or loop if possible, until the user manually moves the presentation forward.

Hi,
You may set the slide setting as 'Advance by user'.
So,
a. Insert flv on a slide.
b. On presenter ribbon goto Slide Manager .
c. Select the slide on which flv is inserted and set Advance by user 'Yes'
Hope this solves your purpose.
Thanks,
Alpi

How to disable the FULL SCREEN option in the 'Insert Video and Audio' option

Hi,
I've been inserting some MP3's and using an image for pupils to click on to play the sound, the images are 100 pixels by 100 pixels.
The only issue is that I have the grey rectangle 'Full Screen' box over the picture. This is ideal when I put videos on but not necessary when you have just an MP3. Also I've noticed that the 'Styles' option is greyed out and due to that I can't change the
colour of the play button.
I've been inserting MP3's direct from my PC hard drive to the webpage.
Any help'd be greatly appreciated.

Hi,
Per my understanding, you might want to disable the “Full Screen” button and make other customization when there is an audio file in the page.
By default, when we insert an audio/video file into page via “Insert Video and Audio” button in the ribbon, an OOTB Media Web Part will be added into the page contains
the file you added, the “Full Screen” button is a part of this Media Web Part.
In consideration of you might have other requirements on designing the style, I would suggest you create a custom Media Web Part instead which will enable you customize
the style as you want.
About creating a custom Media Web Part, you can use the <audio> tag:
http://www.w3schools.com/html/html5_audio.asp
http://www.catswhocode.com/blog/mastering-the-html5-audio-property
http://www.elated.com/articles/html5-audio/
There are also other powerful JavaScript audio plugins:
http://kolber.github.io/audiojs/
http://jplayer.org/
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Unable to publish projects with inserted video - error message The Flash video can not be loaded

I've created a project in Captivate 6 with two slides that have inserted videos in them
Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
Below are my settings and the error message
Any suggestions would be greatly appreciated.

Your screenshot indicates you are publishing to a folder on a network drive.
Have you:
Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

Create tables insert something inside and then connect my application to db

thank you to be patient with me. ok since the beginning I think I have learned a lot with the people responses. so my database is mounted now. I used the cmd.exe command line. i have create an instance, a service, and the database. Now, I need to do two things:create tables inside of my database and insert something inside but I only have the sql script (I will add it at the end of the thread).it is just a part of my huge script.. but this cript can not be open with the command line. So I want to know if you could help me change some stuff inside in the aim to run this script with the command line.that's the first point
secondly, I have an application named lifetrack. i want to connect this application with my database. so how can I change my settings file to be able to do that?(I will add the settings file I have at the end.It is the one I use for sql server). thanks a lot.I'm a french student so I try my best to answer you in a good english. and believe me if I have the exact way to create table,insert something inside like indicate in the part of my script and connect an application to the database you will never see my thread again. thank you
1) sql script to create tables
CREATE TABLE [admin_table] (
     [Can_highlight] [float] NULL ,
     [User_name] [nvarchar] (30) COLLATE Latin1_General_CI_AS NULL ,
     [User_passwd] [nvarchar] (10) COLLATE Latin1_General_CI_AS NULL ,
     [User_group] [nvarchar] (30) COLLATE Latin1_General_CI_AS NULL ,
     [Can_consolidate] [smallint] NULL ,
     [Can_edit_autorpt] [smallint] NULL ,
     [Can_edit_disturbance] [smallint] NULL
) ON [PRIMARY]
GO
INSERT INTO [admin_table] ([Can_highlight],[User_name],[User_passwd],[User_group],[Can_consolidate],[Can_edit_autorpt],[Can_edit_disturbance])
     VALUES (1.0,'A Andrews','A','both',0,0,1)
GO
2) sql server settings file
' NOTES:
' ======
' The parameters in this file are used to specify the following configuration features for the system
' 1. the plant profile
' 2. the default database as well as the available searchable databases
' 3. the paths for accessing particular files used or generated by the system
' The Panels Configuration Mode has either of two values: "Embedded" or "External". It is a setting that determines
' whether the system loads configuration data for the sections of subjects buttons, which are already embedded
' within it, or whether it loads them from the external file:
' "Lifetrack Subjects Panel Configuration.dat"
' The System Database is an index value (zero-based) that determines which of the listed available databases
' is the main active one. In the DATABASES section, the parameters in each comma separated string
' designate the following (in this order):
' DB Index, DB Name, DB Type, DB Filepath, Server Name, Username, Password
PLANT SUBJECTS PANEL:
Panels Configuration Mode: Embedded
DATABASES:
System Database: 0
Available Databases: 1
0,abc_plant,SQL-Server,SQLSERVER_DATABASE,(local),sa,password
FOLDERS:
Saved_Log_Folder: .\
Saved_NOB_Folder: .\
Saved_Log&NOB_Together_Folder: .\
MICROSOFT OFFICE PATHNAME:
Pathname: C:\Program Files\Microsoft Office\Office11\

Yet another thread and yet another cut & paste job.

CP 6 issue with inserted videos

Hi All,
I have an issue with inserted videos in CP6. They play in preview (F8) but not in published output (swf nor html).
This is what I do:
The videos created with CP6, Record new Demo
output cpvc
open cpvc in CP 6
publish see settings below:
Now I want to insert the captured and published demo into my training CP6 project
click 'Video' on menu bar -> Insert Video -> select 'Event Video' -> browse to the file on my computer -> select file (mp4) - click OK
Video gets loaded into CP6 project with default skin
Before save the changes of the project I change the settings on the property panel to:
Now I preview my project
Press F8
Preview is generated
video demo plays automatically as expected
This all even works well with multiple demo videos on one slide which can be selected by clicking different show me buttons (advanced actions created to show and hide according videos)
BUT now I publish my project and nothing works anymore, videos do not show on scene and cannot be selected with respective show me buttons
Publishing settings are:
At the end of the publishing dialogue I click to view output in web browser (IE9) and there starts the trouble:
IE shows up withfollowing dialogue:
I allow blocked content and select cancel in the following dialogue box:
And the training loads, everything works fine except the videos integrated to start automatically there is a blank space nothing.
Does anyone have an idea solution for me?
I am so puzzled and do not know hoe to proceed...
Thanks in advance for your reply!!!
Stephanie

Hi RodWard,
Thanks for your fast reply!!!
The video files are present in the same folder as the SWF publish location.
The drive letter is on my local PC with multiple partitions and not a network drive.
Flash global security settings are set for E:
To your last suggestion about file naming I did the following:
Generate new mp4s
Name them only with alphanumerics ie. DemoScroll
insert them into project
preview OK
publish and check if demos are in folder - yes they are
open html in IE9 - NOK!!!
Now frustration rose...
So I tried one thing that I had not yet tried - open html in FireFox and there it is OK :-)
I do not understand....BUT we need to be able to support IE!!!!
Do you think there are specific settings that need to be changed in IE to make it work?
I would highly appreciate a suggestion what to look for in IE...
Do you think it is related to IE9? ´
Since I have IE 9 and CP6 I also get the LMS messages and actriveX message when viewing projects in browser.
Looking forward to your help.
Thanks in advance Stephanie

Inserting Videos Without MS Word In Acrobat Pro 9 Extended

I've been experimenting with inserting videos as native content using Acrobat Pro 9 Extended. For my ebook publishing this is such an ideal situation, but I don't use MS Word, and there doesn't seem to be any real facility in Acrobat 9 to do simple formatting of the video object (like center it, for example.)
I do have an older version of Word (2000) but it doesn't have the menus listed that seem to inserted into newer versions.
Does anyone know what version of Word is required for this functionality?
Furthermore, is there another way to do this using some other program? I use OpenOffice typically, but could try others if need be.

Thank you for your post. These forums are specific to the
Acrobat.com website and its set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

Problems inserting video via ms word

Hi
I am trying to insert video into ms word for Acrobat Pro Extended as per the instructions below.
When I get to point three I get a message:
AdobePDFmakerX Library not registered.
Screen shot shown in the attached file.
Any ideas?
Thanks
Ken
Insert video into Word, Excel, and PowerPoint files
Acrobat Pro Extended adds a feature to Office that enables you to add video in FLV or SWF format to an Office document. Video that is created in other formats is converted to FLV format when it is added.
After adding a video to an Office document, you can convert the document to PDF and edit the video properties if needed.
In the Office document, select the position where you want the video to appear.
Do one of the following:
In Office 2003, click the Insert Video button in the PDFMaker toolbar.
In Office 2007, click the Embed Video button in the Acrobat ribbon.
Click the Browse button, and then locate the video you want to include.
Change the video settings as needed:
For video that is not in FLV or SWF format, set a poster image by moving the slider to the desired frame. Then click Set Poster Image From Current Frame.
To determine how the playback controls are displayed, select an option from the Skin menu.
To change the display size of the video, click Resize Video, and then change the width and height. Maintain the aspect ratio for best display.
Click OK to convert the video (if needed), and add it to the document.

In the future you might want to seach Google with the error message; Often shows one interesting results.
Any way hopefully this article will point you in the right direction. It seems removing the Office Acrobat Plugin and then re-installing solved the problem for at least one person. See this thread It it doesn't work specifically with your situation you may want to search the entire results page I got on Google (2 pages) as I don't have time to research them for you and I haven't experienced this specific problem myself.
Cheers.

How i can insert videos, export to pdf and then watch the video? i can't

How i can insert videos, export to pdf and then watch the video? i can't. It is suposse that i have to configurate the option save but i don't know how... any help?

Fron the Pages Help menu:
Using Sound and Movies
You can add audio—a music file, a playlist from your iTunes library, or any other sound file—to a Pages document. You can add video that plays within a page.
Pages accepts any QuickTime or iTunes file type, including the following:
MOV
MP3
MPEG-4
AIFF
AAC
Also note that some media files are protected under copyright law. Some downloaded music may be played only on the computer where the download occurred. Make sure the computer you are using has permission to play all the media files included in your document.
When you add media files to your document, make sure that they will be available if you transfer your document to another computer. When saving your document, make sure the option “Copy audio and movies into document” is selected in the Save window. (If you don’t see the option, click the button next to the Save field to display the entire Save window, and then click the Advanced Options disclosure triangle.)

Inserting video inside a slideshow

Similar Messages

Maybe you are looking for