Inserting video into templates
I am extremely new to AE. I have CS6 and am trying to learn it on my own... but it's very complicated.
I have a template I am working with that I want to insert video clips into. The template has jpegs that say "insert photo or video here". How do I swap the jpeg with the video clip without losing the keyframes and effects? I'm not well-versed enough to just re-do them all. I am using the templates to learn the program but to also build a few videos for the non-profit I work for.
Another thought I had was if it was possible to copy all the attributes/effects/keyframes from one media piece to another. So if I were to add the video clip to the composition and copy the attributes from the template photo to the video clip I just added and then make the template photo invisible. But I haven't been able to figure that out. :/
Thanks!
Welcome to the world of After Effects! As you've noticed, it can be pretty complicated. I highly recommend that you start here. That is a set of resources specifically curated to help people new to AE get started off on the right foot.
To your question, this page in the AE help has what you need. It says to select the layer you want to replace in the Timeline panel then Alt-drag (Windows) or Option-drag (Mac OS) your new footage item from the Project panel onto the selected layer in the Timeline panel.
Similar Messages
-
Can't insert videos into iTunes...
hello guyz...
i wanna ask something...
when i bought my iMac, there was already iTunes 6 and i could insert videos into iTunes and sync it into my iPod video...
but now, i've already downloaded iTunes 7.02...
the weird thing is...i can't insert any videos into the library!
i already tried videos with ending .mp4 and .3gp...
but it doesn't appear in the library...
what should i do?
can somebody help me....
plieezz...This is the menu I'm talking about...
-
How do I insert video into my webpage?
I am using Dreamweaver 8. I have taken my camcorder video and uploaded it to youtube and copied the mp4 file to my hard drive.
I have created a page with several videos on the page. I created a screenshot of the video and sized it to the appropriate size. I then created a link to the video mp4 file. However it opens in a separate page.
I want to have the video open on the same page in the same location as the screenshot. Click on the image and it just starts playing.
I notice that I can get it to do this if it is a flash (.flv) file but since all of my videos are mp4 that won't work.
How do I insert video into my webpage? Do I convert the mp4 files to flash? How? What do I do?
Thanks
MattThe help docs tell you how:
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7c9 fa.html
or:
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7ca da.html
Or other media objects:
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7c9 2a.html -
Help with html code - inserting video into Muse
I am seeking help writing the code to insert a video into Muse. I uploaded video into my Business Catalyst hosting. I need it to autoplay, loop and not show any controls or frames.
When I host video on Vimeo or YouTube, I see markings on the video that is why I am trying to just host in the same place that the files are stored for my website. If there is a way to host on youtube with out any markings showing up on the video I would be open to that too.
I don't want to see any play button or time bar.
Thanks in advance!!Hello,
Just as an FYI - we also have an HTML5 video tool over at MuseThemes.com that achieves this, but works on mobile devices as well. The link above looks like it uses Flash, which isn't common anymore since the release of HTML5 based video.
Simply drag the widget out onto your canvas, and link up your videos / set options like loop, controls visible, etc. It's quite a flexible widget, and there's a complete training video included so you don't get stuck
Check out the widget here
Just wanted to provide another alternative that could be helpful. Cheers!
Steve Harris
MuseThemes.com -
Inserting javascript into template
What I would like to do is have the same slideshow play on the right sidebar on all the pages of the website. This is Javascript. The engine and data folders are already on the server.
www.wranglergirl.net
The directions say to upon publishing the slideshow, to take the html generated code and enter it in the Head and Body tags (where I want it displayed, which is the sidebar) respectively. Now, I opened the .dwt file and removed the existing content from the sidebar, but after saving, the html pages still had the content there - I since removed it from each page, but don't want to keep doing that.
However, The Missing Manual says to.. Insert, HTML, Script Objects, Script. Is doing that at the insertion point on the template correct? Do I still have to enter the HTML code from the slideshow software? Confused!
This is a free template I got from Adobe.
AmyIt does. Editable regions are created for child pages. If you create an editable region and insert content into it, when you create a new child page, the content will be there. If you edit the content in the template that is in the editable region, the changes will not be made to the existing child pages.
So if you have a template, with an editable region, and you insert content into that editable region, any child pages that were previously made will not have this new contest inserted into them.
Gary -
Inserting Video Into My Training
I have some video that was captured as an AVI file and they
also put it into MPg4 format.
Do I need to convert this into a SWF flash file before I can
insert it into my training program? Do I need outside software to
make this conversion or will "Presenter" do this for me? Is there
somewhere that explains the process for doing this other than the
Adobe Guide for "Presenter". I have not found this very clear.Presenter has the ability to take, ASF, WMV, MPG, MP4, DV,
DVI, MOV, or 3G videos to FLV.
Use the Insert Video tool in Presenter and see if the MPg4
video will work, or if the team that created the AVI has the
ability to turn it into an FLV, that my be the best option as FLVs
work naively in Presenter.
Jorma@RealEyes -
N8: Inserting video into MMS (wrong size is calcul...
Hello,
as far as I know, most providers are supporting a maximum size of 300kb when sending a mms. If i try to insert a video into a new mms, the N8 will record about 1 Minute of video (mms-qualilty), which has a size of about 420kb! That is to big to use it which a mms.
From my old N95 i know a setting, where you could define the 300kb size and the phone only recorded 300kb then in mms-quality. This setting is missing in the new N8 preferences!
Also there is an issue with inserting pictures into mms. Ok, N8 is resizing it, but the old N95 told you when the maximum of 300kb is reached. The N8 don't show any notification at all and the size will grow into the wild.
I'm already using the setting where you should be warned and the picture size is set to small by default! But this changes nothing!
Any thoughts?
Thank youHey Helen! I'll do the best I can to provide information in
the order you requested it.
First, yes, that can be done. Just get any one of a variety
of conversion utilities (Google something like "AVI to FLV") to
convert your video to Flash video format.
Second, I do not publish to EXE when I can avoid it, so will
leave it to someone else to tell you whether the FLV can be
accessed within the EXE output. I think not, but like I said, I
don't like the lack of versatility of Captivate's "executable"
output, and avoid using it personally.
Third, inserting a FLV into a Captivate project should not
substantially increase the file size of your EXE (if it can even be
done in an EXE) or your SWF output. Basically the FLV acts as a
"pointer" and is a pretty small file. On the other hand, if you
choose to add your video as a SWF instead of a FLV, you can expect
file-size to increase proportional to the SWF size.
About your "separate note": You can find training at
this Adobe
link to certified training providers
. Use this link to obtain the names and contact information for
the Adobe certfied training providers nearest your geographical
location.
Training companies across the U.S. and around the world offer
instructor-led training by Adobe-certified instructors. You can
register for a "open to the public" class, or you can arrange
on-site training that is specifically geared your needs and/or
wallet.
Best of luck to you! -
Does adobe have alternatives for inserting photos into templates?
I have just downloaded this software in the hope that I can use some template files. They are eps and elements 13 doesn't support it.
In addition to this the only other thing that I wanted elements for was to remove backgrounds. I can't find a tutorial on that. The only one listed is for CC.
The only use I have for the software is to insert photos into a sublimation template. Do Adobe have an alternative that can do this?Please review this and get back with issues that need additional clarification:
How to import my images into templates for sublimation blanks [was: inserts]? [was: HELP]
As for EPS files, Irfanview will open them, and then you can save them as JPEG files and open them in PSE.
Irfanview is a terrific program, free: www.irfanview.com -
Inserting Video into Powerpoint Slide
I need to place digital video into a powerpoint slide, what would be the quicktime settings, should it be interlaced or progressive?
In addition to those things already suggested I would add the following:
If the presentation is being run from a windows platform (likely if you are preparing for powerpoint), they usually handle mpeg or wmv files better than quicktime.
When making the mpeg or wmv, don't set the resolution or bit rates too high. There are usually fairly high overheads of memory and processor usage in running a video within the presentation and if the resolution or bit rate is too high the system won't keep up. This results in poor quality video, dropped frames etc. For the same reason it is a good idea not to resize the video in the presentation. Audiences usually accept slightly soft or blocky video better than stuttering ones.
Make sure the files are copied to the system's hard drive and not run from a CD. Laptop drives often have trouble keeping up with higher data rates and they are usually set to spin down when not in use for a while.
Test the result on the target system!!! If you can't access the target system find a slow one to test it on unless you know the performance of the one it will be run on.
Our company does live event work as well as post-production and we often see bad results, usually accompanied by comments like "it ran all right at home (on son/daughter's gaming machine), but it isn't working very well on my (5 year old) laptop".
In summing up, I would suggest being conservative rather than trying to impress with dazzling effects and huge high resolution pictures. -
Problem inserting FLV into template based page DW8
Error when inserting an FLV into a template based page.
The error is: "Making this change would require changing code
that is locked by a template or translator. The change will be
discarded."
I thought perhaps something was wrong with my code so I
created a new page in DW8, with one word of text. Saved the new
page as a template with the one word of text made into an editable
region. Created a page based on that template and attempted to
insert a FLV file into the editable region (using Insert > Media
> Flash Video). I still get the error message. I've attached the
code for this page.
I also get the error message when I go through the tutorial
Presenting
Video with the Flash Video Component in Dreamweaver 8. Using
the files provided in the tutorial.
Is the only workaround for this the one I found here?:
http://med.stanford.edu/irt/web/references/flash_video_installation.html.
Steps are under heading "Workaround for Locked Code insert error"
near bottom of page.
Any help is appreciated.
Jen> Is the only workaround for this the one I found here?:
>
http://med.stanford.edu/irt/web/references/flash_video_installation.html.
> Steps
> are under heading "Workaround for Locked Code insert
error" near bottom
> of
> page.
This workaround *will* work....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"kilmeny21" <[email protected]> wrote in
message
news:[email protected]...
> Error when inserting an FLV into a template based page.
>
> The error is: "Making this change would require changing
code that is
> locked
> by a template or translator. The change will be
discarded."
>
> I thought perhaps something was wrong with my code so I
created a new page
> in
> DW8, with one word of text. Saved the new page as a
template with the one
> word
> of text made into an editable region. Created a page
based on that
> template and
> attempted to insert a FLV file into the editable region
(using Insert >
> Media >
> Flash Video). I still get the error message. I've
attached the code for
> this
> page.
>
> I also get the error message when I go through the
tutorial
>
http://www.adobe.com/devnet/flash/articles/flv_tutorial.html.
Using the
> files
> provided in the tutorial.
>
> Is the only workaround for this the one I found here?:
>
http://med.stanford.edu/irt/web/references/flash_video_installation.html.
> Steps
> are under heading "Workaround for Locked Code insert
error" near bottom
> of
> page.
>
> Any help is appreciated.
> Jen
>
>
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml"><!--
InstanceBegin
> template="/Templates/index.dwt"
codeOutsideHTMLIsLocked="false" -->
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <!-- InstanceBeginEditable name="doctitle" -->
> <title>Untitled Document</title>
> <!-- InstanceEndEditable -->
> <!-- InstanceBeginEditable name="head" --><!--
InstanceEndEditable -->
> </head>
>
> <body>
> <!-- InstanceBeginEditable name="temp"
-->Text<!-- InstanceEndEditable -->
> </body>
> <!-- InstanceEnd --></html>
> -
Problem inserting video into a page
Hi, I have a page created using a custom page layout that I created.
I tried using the Video page field but when I configure the video, with youtube url it doesn't work. here is the url I used,
https://www.youtube.com/watch?v=v6yvW66-ThI&feature=player_embedded and https://www.youtube.com/watch?v=v6yvW66-ThI both won't work It gives message at the bottom saying loading of video failed.
<!--CS: Start Page Field: Promo-Video Snippet-->
<!--SPM:<%@Register Tagprefix="PageFieldMediaFieldControl" Namespace="Microsoft.SharePoint.Publishing.WebControls" Assembly="Microsoft.SharePoint.Publishing,
Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>-->
I then tried inserting into a Page Content section. I clicked on the Insert tab, click "Video and Audio" then "Embed". I then paste the following code into the dialog. The video loads and I click the Insert button. In
Edit mode I can see and play the video. I click to save the page and the video disappear. I click to edit the page again and the video snippet code I pasted earlier is gone. <iframe width="510" height="340" src="//www.youtube.com/embed/v6yvW66-ThI?feature=player_detailpage"
frameborder="0" allowfullscreen></iframe>
<!--CS: Start Page Field: Course-Finder Snippet-->
<!--SPM:<%@Register Tagprefix="PageFieldRichHtmlField" Namespace="Microsoft.SharePoint.Publishing.WebControls" Assembly="Microsoft.SharePoint.Publishing,
Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>-->
<!--MS:<PageFieldRichHtmlField:RichHtmlField FieldName="7028b9a8-236b-42a4-a74d-50c8459ec679" runat="server">-->
<!--PS: Start of READ-ONLY PREVIEW (do not modify)--><div id="ctl02_label" style="display:none">Course-Finder</div><div
id="ctl02__ControlWrapper_RichHtmlField" class="ms-rtestate-field" style="display:inline" aria-labelledby="ctl02_label"><div align="left" class="ms-formfieldcontainer"><div class="ms-formfieldlabelcontainer"
nowrap="nowrap"><span class="ms-formfieldlabel" nowrap="nowrap">Course-Finder</span></div><div class="ms-formfieldvaluecontainer"><div class="ms-rtestate-field">Course-Finder
field value. Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute
irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.</div></div></div></div><!--PE:
End of READ-ONLY PREVIEW-->
<!--ME:</PageFieldRichHtmlField:RichHtmlField>-->
<!--CE: End Page Field: Course-Finder Snippet-->
Thank you.Thank you for the link. I read it over a couple of times but it says youtube doesn't work. I checked the Site Setting ->HTML Field Security and youtube.com is in the allowed iframes list. Below is from the link
Using the "Embed Code" dialog
When editing a HTML field, there is now a new button available on the ribbon called "Embed Code" in the "Insert" tab. As the <iframe> code is inserted, the dialog tells you that the content will be inserted in a web part. YouTube didn’t work because they
prevent display in an iframe due to security reasons but Bing did.
One thing is that we're Intranet site so it has to be https but in the snippet editor of embedded code the video is loaded and plays. It just disappear after I save the page.
Anyway to get youbute iframe to work using either embedded code or in Edit Html source in a SP publishing site page?
Thank you. -
Inserting video into Acrobat 9 Pro
Hi,
I can embed a flash video (flv) file into my PDF and and it works fine.
The options dialog correctly shows the size of the video and displays it in the page.
The video is 720 x 370 pixels
snap to content proportions is always checked.
When I link to a video which is online (same file) and I insert by double clicking...
The options dialog shows the video proportions to be 320 x 240. I can not change this. Acrobat then puts a huge ugly black bordered rectangle on the page. This covers some of my text and its size can not be adjusted.
Border is set to None in the options dialog.
When my video is clicked and plays it has dark grey areas top and bottom just as a widescreen movie would on a regular TV.
When I link to a video which is online (same file) and I insert by drawing the area with a click and drag.....
The size of the rectangle seems to be based on the height of the area I drag. It maintains a 4 x 3 type aspect ratio. Acrobat then puts a ugly black bordered rectangle on the page again. Drag a small area you get a tiny rectangle.
Border is set to None in the options dialog.
When my video is clicked and plays it has the same dark grey areas top and bottom just as a widescreen movie would on a regular TV.
When I insert an image using create poster from file in the options dialog the image is scaled/stretched to fit the container (no black bars top and bottom. The video still has the bars when it plays though.
How can I get my video to play and display at its proper size when it is linked not embedded?????
Thanks
MarkHi All,
Just thinking that perhaps it would help to rephrase my question. . .
Does anyone else add Captivate demos to PDF files, and if so which format do you use?
Which format should I use in order to embed the demo file and see the playback controls when running the demo in the PDF file?
I'm using Captivate 3 and Acrobat 9 Pro Extended, both from the Tech Comms Suite v1.3.
Thanks for any help you can provide.
Regards
Lillibet -
hard
Hi Nicole,
What is the format of the video you are trying to insert and its size.
Regards,
Rave -
Insert Video into finished piece on timeline
I finished a video and need to add about 4 seconds to a couple of shots. Adding those 4 seconds slides everything on the timeline and affects music and transitions throughout the rest of the video. Is there a way to add insert in the middle of a video and not change the rest of the timeline?
Steve, thanks, didn't realize I could do that. Not sure it will help me here but locking the timeline will be extremely useful. Let me be more specific and see if you have a suggestion. I have pictures on multiple layers that overlap with transitions. Basically, I need to add 2 seconds to consecutive pictures. So I don't need to add new clips, just time to exisiting ones. When I do this, all of the transitions for the remaining pictures shift and do not match up. Make sense? Any thoughts? Thanks.
-
Insert video into different shapes?
Hi Guys
Is it possible to insert a video inside quote marks as shown here? I have inserted a video within this shape but when I press play on the iPad it plays in it's original size – rectangle.
Any help appreciated!
Cheers
GemmaThanks Johannes.
I have tried this and it is now working for me!
I have placed my slideshow over the video. It has two states (identical). Maybe my settings could be wrong on my slideshow?
Do I autoplay ot tap to play?
Many thanks
Gemma
Maybe you are looking for
-
Reinstalled itunes 10 64bit on pc running Windows 7 64 bit but nothing plays now.
itunes 10 stopped playing tracks when I clicked on them. So have just reinstalled ver10 64 bit on pc running Win 7 64bit, rebooted computer but still won't play. Have recently updated Nvidia display drivers (64bit) but wouldn't think this would affec
-
Blackberry Siezing with certain functions
Hello, this may have already been covered in the forum, I have had a look but have not discovered it, so please fogive if i am repeating. My blackberry has seized at the moment with facebook notificiations - it says I have 2 messages (on the notific
-
Suggestions for Flex Builder for Linux
I'm new to Flex, and I have to say that I'm enjoying it quite a lot. I think the thing that really helps speed up development is good tools. Flex Builder 3 for Linux makes a good start at providing a very nice development tool, but there are a couple
-
Time Machine backup error (see logs)
I got this error twice today on a Time Machine backup. Disk Util shows the backup disk ("Drifting") to be ok. Logs: 1/18/08 1:57:16 PM /System/Library/CoreServices/backupd[67912] Backup requested by automatic scheduler 1/18/08 1:57:16 PM /System/Libr
-
BTFON - Can see Hotspots but cannot join them
Previously I've been able to connect to Hotspots without issue on my iPhone, but recently I've been able to see the Hotspots but whenever I try to connect to them using the BT Wi-fi app it never connects. Some areas I work in there is very little sig