Insertion of a new record ?

Hi,
Suppose there is lot of empty space below HWM caused by some deletion of records . Whenever I will insert a new record - will that record go in that empty space or it will go above HWM by allocating more extent if not available.
Thanx

Sumit,
you haven't specified whether you are using ASSM or not. If you are not using ASSM, then it depends on the PCT_USED value. For ASSM, i haven't seen any document mentioning the algorithm. May be some could have insight abt it.
Thanks and Regards,
Satheesh Babu.S
Bangalore.

Similar Messages

Settings for update/insert new records

Hi everybody,
I'm at the beggining of learning the OWB in order to create a Data Warehouse environment.
I have successfully created a table in the target schema , which is a match of columns found in 4 tables in the source schema.
Which settings(steps) are necessary in order to update some records according to the update done in 4 tables in source schema , which have already been inserted in the table in target schema- using the execute pop-up menu command?
Additionally , how can I insert only the new records to the target schema by using the execute command in pop-up menu ...
Thanks , a lot
Simon

Hi Simon,
If you have constraints set on your target table, and the operator properties are set to "Match by Constraints = All Constraints", then the process recognizes automatically when to update which fields and when to insert new records.
If you have no constraints on your target then the operator properties are set to"Match by Constraints = No Constraints", and in this case you should set the Loading properties for each attribute (Field) in the target table.
Greetings,
Ilona Tielke

JSF: how to add new record in datatable from same page

Jdeveloper : 11.1.2.2.0
using ADF i want to create a page that contains a datatable, input text field and a command button.
when i press the command button i want the text in the input text field to be inserted as a new record in datatable.
what is the best practice for that ? how to get the value of the input text field and insert it?
thanks in advance :)

thanks so much that really helped :)
the solution is to do it programatically in a managed bean :)

How to create a new record using a custom method?

Hi I want to create Jdev 11 a new record using the contructor following in the footsteps of http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtAnchor.CACCIJAG/vtTopicFile.adfdevguide%7Cweb_adv~htm/.
My problem is the following.
Messages for this page are listed below.
Error
JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
Error
java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
Error
Object: null is not a known entity type.
Someone can help me?
Cristian.

Hello Frank, this tutorial make it and was successful but, what I am trying to do is add a new record in the table departments. The steps undertaken are suguientes
drag over page the contructor department, with a submit, this will drag on the button, the method presistencia, set binding action with "$ (bindings.Departments.result)", and when running the application gives me the error
Nov 2, 2007 10:06:22 PM oracle.adf.controller.faces.lifecycle.FacesPageLifecycle addMessage
WARNING: ADFc: JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
I need to know if what I am doing is right, because I followed the steps of the tutorials and it is not functioning the insertion of a new record.
Thank you thank you.

Sql query to Load only new records,or update old records

Hi,
I need a query (not stored procedure) to insert only new records otherwise update existing records.
I tried by creating "Merge statement in SQl", but the sql query is wrong,it is not updating,always inserting records(replicating..1,2,4,8,16,32..).
below is my sample query,
Here "FACT_mytbl -FCT" is my fact table.(which need to update if already records found ,otherwise insert as new records).
*Inside select ---the table   E_tbl1,E_tbl2 is the business logic table ,using this two table only ,"FACT_mytbl" was created .So the "S" alias will be the source
table and "FCT" will be target table. based on this we have to insert or update records.
---Query starts-------------------------------------
MERGE INTO [FACT_mytbl] FCT
USING (
SELECT
FCT1.ID
,FCT1.PKcol1
,FCT1.FKcol1
,FCT1.col1
,FCT1.col2
, FCT1.col3
FROM [FACT_mytbl] FCT1 WITH(NOLOCK)
LEFT JOIN dbo.E_tbl1 CT WITH(NOLOCK)
ON CT.PKcol1=FCT1.PKcol1
LEFT JOIN dbo.E_tbl2 CT1 WITH(NOLOCK)
ON CT1.PKcol1=FCT1.PKcol1
) S
ON FCT.PKcol1 = S.PKcol1
WHEN MATCHED AND (FCT.PKcol1 ! = S.PKcol1 ) THEN
UPDATE SET
FCT.col1
,FCT.col2
,FCT.col3
WHEN NOT MATCHED THEN
INSERT VALUES
S.ID
,S.PKcol1
,S.FKcol1
,S.col1
,S.col2
, S.col3
--query ends----------------
any suggestions,
Thanks,
R.B

Hi Bhupesh_Rajasekaran,
According to your description, if you want to insert only new records which does not exist in destination and update existing records which does exist in destination. We usually accomplish these in two statement.
1.A join statement to update records.
2.A insert statement for new records.
Also we can use MERGE in SQL Server to insert, update at the same time. You specify a "Source" record set and a "Target" table, and the join between the two. You then specify the type of data modification that is to occur when the records between the two
data are matched or are not matched. For more information, there is an similar example about merge in SQL Server, you can review the following article.
http://www.codeproject.com/Tips/590085/Merge-in-SQL-Server
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Showing results of new record

HI Everyone,
I am new to Coldfusion so I need a little hand holding. Here
is what I am trying to do with two tables in question from a SQL
Server 2005 database:
Suppliers
CompanyID
Company
Contact
Address
State
States
StateID
StateAbbrev
StateName
The State row in the Suppliers Table is a FK link to the
StatesID row in the States table.
I am using a dropdown menu to add the new Supplier in the
website. I am able to insert the new Supplier just fine, which is
wonderful.
My problem, however, is on the Results page. After the
insertion of the new record, the user is automatically forwarded to
a results page where he can see the new Supplier.
For the State, he sees the
StateID from the States table. This is all fine and dandy,
but I would like to be able to show "NJ" instead of "5" as the
State.
Any help for me on this ... Like sure...done all the time!
But I'm kinda boxed...

I think you just need to use a join in the query returning
the new suppier information. Here is the basic idea
SELECT s.CompanyID, s.Company, s.Contact, s.Address,
st.StateAbbrev
FROM Suppliers s INNER JOIN States st ON s.State = st.StateID
WHERE s.Supplier = #IDOfNewSupplier#

How to insert a new record to table with foreign key

I have 3 tables like this :
CREATE TABLE PERSON (
PK INTEGER NOT NULL,
NAME VARCHAR(10),
SSNUM INTEGER,
MGR INTEGER);
ALTER TABLE PERSON ADD CONSTRAINT PK_PERSON PRIMARY KEY (PK);
ALTER TABLE PERSON ADD CONSTRAINT FK_PERSON FOREIGN KEY (MGR) REFERENCES
PERSON (PK);
/* Tables
CREATE TABLE PROJECT (
PK INTEGER NOT NULL,
CODE_NAME INTEGER);
ALTER TABLE PROJECT ADD CONSTRAINT PK_PROJECT PRIMARY KEY (PK);
/* Tables
CREATE TABLE XREF (
PERSON INTEGER NOT NULL,
PROJECT INTEGER NOT NULL);
ALTER TABLE XREF ADD CONSTRAINT PK_XREF PRIMARY KEY (PERSON, PROJECT);
ALTER TABLE XREF ADD CONSTRAINT FK_XREF1 FOREIGN KEY (PERSON) REFERENCES
PERSON (PK);
ALTER TABLE XREF ADD CONSTRAINT FK_XREF2 FOREIGN KEY (PROJECT) REFERENCES
PROJECT (PK);
I do like the way of "ReverseTutoral" and the file .jdo here :
<?xml version="1.0" encoding="UTF-8"?>
<jdo>
<package name="reversetutorial">
<class name="Person" objectid-class="PersonId">
<extension vendor-name="kodo" key="class-column" value="none"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="table" value="PERSON"/>
<field name="name">
<extension vendor-name="kodo" key="data-column"
value="NAME"/>
</field>
<field name="person">
<extension vendor-name="kodo" key="pk-data-column"
value="MGR"/>
</field>
<field name="persons">
<collection element-type="Person"/>
<extension vendor-name="kodo" key="inverse"
value="person"/>
<extension vendor-name="kodo" key="inverse-owner"
value="person"/>
</field>
<field name="pk" primary-key="true">
<extension vendor-name="kodo" key="data-column"
value="PK"/>
</field>
<field name="ssnum">
<extension vendor-name="kodo" key="data-column"
value="SSNUM"/>
</field>
<field name="xrefs">
<collection element-type="Xref"/>
<extension vendor-name="kodo" key="inverse"
value="person"/>
<extension vendor-name="kodo" key="inverse-owner"
value="person"/>
</field>
</class>
<class name="Project" objectid-class="ProjectId">
<extension vendor-name="kodo" key="class-column" value="none"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="table" value="PROJECT"/>
<field name="codeName">
<extension vendor-name="kodo" key="data-column"
value="CODE_NAME"/>
</field>
<field name="pk" primary-key="true">
<extension vendor-name="kodo" key="data-column"
value="PK"/>
</field>
<field name="xrefs">
<collection element-type="Xref"/>
<extension vendor-name="kodo" key="inverse"
value="project"/>
<extension vendor-name="kodo" key="inverse-owner"
value="project"/>
</field>
</class>
<class name="Xref" objectid-class="XrefId">
<extension vendor-name="kodo" key="class-column" value="none"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="table" value="XREF"/>
<field name="person">
<extension vendor-name="kodo" key="pk-data-column"
value="PERSON"/>
</field>
<field name="person2" primary-key="true">
<extension vendor-name="kodo" key="data-column"
value="PERSON"/>
</field>
<field name="project">
<extension vendor-name="kodo" key="pk-data-column"
value="PROJECT"/>
</field>
<field name="project2" primary-key="true">
<extension vendor-name="kodo" key="data-column"
value="PROJECT"/>
</field>
</class>
</package>
</jdo>
Data of those tables are :
PERSON :
| PK | NAME | SSNUM | MGR |
| 1 | ABC | 1 | 1 |
| 2 | DEF | 5 | 1 |
PROJECT
| PK | CODE_NAME |
| 1 | 12 |
| 2 | 13 |
And now I want to add a new record into table XREF : insert into XREF
values (1,1);
public void createData() {
Xref xref = new Xref();
Person person = new Person(1);
Project project = new Project(1);
xref.setPerson(person);
xref.setProject(project);
person.getXrefs().add(xref);
person.getXrefs().add(xref);
pm.currentTransaction().begin();
pm.makePersistent(xref);
pm.currentTransaction().commit();
I don't know why Kodo automatically insert new record to table PERSON ->
confilct Primary Key. The errors are :
0 [main] INFO kodo.Runtime - Starting Kodo JDO version 2.4.1
(kodojdo-2.4.1-20030126-1556) with capabilities: [Enterprise Edition
Features, Standard Edition Features, Lite Edition Features, Evaluation
License, Query Extensions, Datacache Plug-in, Statement Batching, Global
Transactions, Developer Tools, Custom Database Dictionaries, Enterprise
Databases, Custom ClassMappings, Custom ResultObjectProviders]
41 [main] WARN kodo.Runtime - WARNING: Kodo JDO Evaluation expires in 29
days. Please contact [email protected] for information on extending
your evaluation period or purchasing a license.
1627 [main] INFO kodo.MetaData -
com.solarmetric.kodo.meta.JDOMetaDataParser@e28b9: parsing source:
file:/D:/AN/Test/classes/reversetutorial/reversetutorial.jdo
3092 [main] INFO jdbc.JDBC - [ C:23387093; T:19356985; D:10268916 ] open:
jdbc:firebirdsql:localhost/3050:D:/An/test/temp.gdb (sysdba)
3325 [main] INFO jdbc.JDBC - [ C:23387093; T:19356985; D:10268916 ]
close:
com.solarmetric.datasource.PoolConnection@164dbd5[[requests=0;size=0;max=70;hits=0;created=0;redundant=0;overflow=0;new=0;leaked=0;unavailable=0]]
3335 [main] INFO jdbc.JDBC - [ C:23387093; T:19356985; D:10268916 ] close
connection
3648 [main] INFO jdbc.JDBC - Using dictionary class
"com.solarmetric.kodo.impl.jdbc.schema.dict.InterbaseDictionary" to
connect to "Firebird" (version "__WI-V6.2.972 Firebird 1.0.3)WI-V6.2.972
Firebird 1.0.3/tcp (annm)/P10") with JDBC driver "firebirdsql jca/jdbc
resource adapter" (version "0.1")
4032 [main] INFO jdbc.JDBC - [ C:25657668; T:19356985; D:10268916 ] open:
jdbc:firebirdsql:localhost/3050:D:/An/test/temp.gdb (sysdba)
4143 [main] INFO jdbc.SQL - [ C:25657668; T:19356985; D:10268916 ]
preparing statement <3098834>: INSERT INTO XREF(PERSON, PROJECT) VALUES
4224 [main] INFO jdbc.SQL - [ C:25657668; T:19356985; D:10268916 ]
executing statement <3098834>: [reused=1;params={(int)1,(int)1}]
4244 [main] INFO jdbc.SQL - [ C:25657668; T:19356985; D:10268916 ]
preparing statement <9090824>: INSERT INTO PERSON(MGR, NAME, PK, SSNUM)
VALUES (?, ?, ?, ?)
4315 [main] INFO jdbc.SQL - [ C:25657668; T:19356985; D:10268916 ]
executing statement <9090824>: [reused=1;params={null,null,(int)1,(int)0}]
4598 [main] WARN jdbc.JDBC - java.sql.SQLWarning: java.sql.SQLWarning:
resultSetType or resultSetConcurrency changed
4598 [main] WARN jdbc.JDBC - java.sql.SQLWarning: java.sql.SQLWarning:
resultSetType or resultSetConcurrency changed
4598 [main] INFO jdbc.JDBC - [ C:25657668; T:19356985; D:10268916 ] begin
rollback
4608 [main] INFO jdbc.JDBC - [ C:25657668; T:19356985; D:10268916 ] end
rollback 10ms
4628 [main] INFO jdbc.JDBC - [ C:25657668; T:19356985; D:10268916 ]
close:
com.solarmetric.datasource.PoolConnection@1878144[[requests=2;size=2;max=70;hits=0;created=2;redundant=0;overflow=0;new=2;leaked=0;unavailable=0]]
4628 [main] INFO jdbc.JDBC - [ C:25657668; T:19356985; D:10268916 ] close
connection
javax.jdo.JDOFatalDataStoreException:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=INSERT INTO PERSON(MGR, NAME, PK, SSNUM) VALUES (null, null, 1, 0)]
[PRE=INSERT INTO PERSON(MGR, NAME, PK, SSNUM) VALUES (?, ?, ?, ?)]
GDS Exception. violation of PRIMARY or UNIQUE KEY constraint "PK_PERSON"
on table "PERSON" [code=335544665;state=null]
NestedThrowables:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=INSERT INTO PERSON(MGR, NAME, PK, SSNUM) VALUES (null, null, 1, 0)]
[PRE=INSERT INTO PERSON(MGR, NAME, PK, SSNUM) VALUES (?, ?, ?, ?)]
GDS Exception. violation of PRIMARY or UNIQUE KEY constraint "PK_PERSON"
on table "PERSON"
at
com.solarmetric.kodo.impl.jdbc.runtime.SQLExceptions.throwFatal(SQLExceptions.java:17)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:416)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.flush(PersistenceManagerImpl.java:575)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:438)
at reversetutorial.Finder.createData(Finder.java:74)
at reversetutorial.Finder.main(Finder.java:141)
NestedThrowablesStackTrace:
org.firebirdsql.jdbc.FBSQLException: GDS Exception. violation of PRIMARY
or UNIQUE KEY constraint "PK_PERSON" on table "PERSON"
at
org.firebirdsql.jdbc.FBPreparedStatement.internalExecute(FBPreparedStatement.java:425)
at
org.firebirdsql.jdbc.FBPreparedStatement.executeUpdate(FBPreparedStatement.java:136)
at
com.solarmetric.datasource.PreparedStatementWrapper.executeUpdate(PreparedStatementWrapper.java:111)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executePreparedStatementNonBatch(SQLExecutionManagerImpl.java:542)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executePreparedStatement(SQLExecutionManagerImpl.java:511
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executeInternal(SQLExecutionManagerImpl.java:405)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.flush(SQLExecutionManagerImpl.java:272
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:411)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.flush(PersistenceManagerImpl.java:575)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:438)
at reversetutorial.Finder.createData(Finder.java:74)
at reversetutorial.Finder.main(Finder.java:141)
at org.firebirdsql.gds.GDSException: violation of PRIMARY or UNIQUE KEY
constraint "PK_PERSON" on table "PERSON
at org.firebirdsql.jgds.GDS_Impl.readStatusVector(GDS_Impl.java:1683)
at org.firebirdsql.jgds.GDS_Impl.receiveResponse(GDS_Impl.java:1636)
at org.firebirdsql.jgds.GDS_Impl.isc_dsql_execute2(GDS_Impl.java:865)
at
org.firebirdsql.jca.FBManagedConnection.executeStatement(FBManagedConnection.java:782)
at
org.firebirdsql.jdbc.FBConnection.executeStatement(FBConnection.java:1072)
at
org.firebirdsql.jdbc.FBPreparedStatement.internalExecute(FBPreparedStatement.java:420)
at
org.firebirdsql.jdbc.FBPreparedStatement.executeUpdate(FBPreparedStatement.java:136)
at
com.solarmetric.datasource.PreparedStatementWrapper.executeUpdate(PreparedStatementWrapper.java:111)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executePreparedStatementNonBatch(SQLExecutionManagerImpl.java:542)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executePreparedStatement(SQLExecutionManagerImpl.java:511)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executeInternal(SQLExecutionManagerImpl.java:405)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.flush(SQLExecutionManagerImpl.java:272)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:411)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.flush(PersistenceManagerImpl.java:575)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:438)
at reversetutorial.Finder.createData(Finder.java:74)
at reversetutorial.Finder.main(Finder.java:141)
Exception in thread "main"

First off, use the '-primaryKeyOnJoin true' flag when running the reverse
mapping tool so that you can get rid of that useless Xref class and have
a direct relation between Person and Project. See the documentation on
reverse mapping tool options here:
http://www.solarmetric.com/Software/Documentation/latest/docs/ref_guide_pc_reverse.html
But your real problem is that you are creating new objects, assigning
primary key values, and expecting them to represent existing objects.
That's not the way JDO works. If you want to set relations to existing
objects in JDO, you use the PM to look up those objects. If you try to
create new objects, JDO will assume you want to insert new records into
the DB, and you'll get PK conflicts like you see here.
There are several good books out on JDO; if you're just starting out with
it, they might save you a lot of time and help you master JDO quickly.

Receiver JDBC: Error while doing the Deleting and Inserting new records

Hi All,
I am doing Idoc to JDBC scenario. In this I am collecting & bundling different type of Idocs and then sending to the JDBC receiver. My requirement is to delete the existing records in the database and insert the new records. I have configures as mentioned in the link
Re: Combining DELETE and INSERT statements in JDBC receiver
In the above link its shows for single mapping. In my scenario I am using multi mapping for collecting idocs in BPM. If I configured for normal mapping then it is working fine(Deleting existing records and Inserting new record). Whenever I am using multi mapping then I am getting following error in the receiver JDBC communication channel u201CError while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)u201D . Can you please tell me what might be the problem.
Thanks & Regards,
T.Purushotham

Hi !
check this out:
JDBC - No 'action' attribute found in XML document - error
JDBC receiver adapter: No 'action' attribute found in XML document
It appears that the inbound payload (the one that is going from XI to the JDBC adapter) does not have the requiered tag to specify which SQL action to execute in the receiver system. Maybe the multimapping is not creating the desired output message format.
Regards,
Matias.

Problem with inserting new records in Oracle Forms

Hi Friends,
I am a new user to Oracle Forms and I need a help from you people. The problem is as follows:
I have a data block in which I can display a number of records. In this data block the user will be able to edit the fields if no child records are found in another table. I have used when-new-record-instance to attain this scenario. All are text items. One item licensee_id which is made invisible by setting the property in property palette and required=no ( as this is the primary key of the table). Also the audit columns are made invisible.
The code for it is as follows:
DECLARE
     v_alert_button NUMBER;
     v_cnt                          NUMBER;
BEGIN
     SELECT COUNT (*)
INTO v_cnt
FROM id_rev_contracts
WHERE licensee_id = :ID_REV_LICENSEES.licensee_id;
IF v_cnt > 0 THEN
set_item_property('ID_REV_LICENSEES.LICENSEE_NAME', UPDATE_ALLOWED, PROPERTY_FALSE);
ELSE
     set_item_property('ID_REV_LICENSEES.LICENSEE_NAME', UPDATE_ALLOWED, PROPERTY_TRUE);
     -- set_item_property('ID_REV_LICENSEES.LICENSEE_NAME', INSERT_ALLOWED, PROPERTY_TRUE);
END IF;
END;
Now in this data block I should also be able to insert new records and for the same I have used PRE-INSERT trigger and the code for it is as follows:
DECLARE
     v_alert_button NUMBER;
CURSOR v_licensee_id IS SELECT id_rev_licensees_s.NEXTVAL FROM dual;
BEGIN
OPEN v_licensee_id;
FETCH v_licensee_id INTO :id_rev_licensees.licensee_id;
CLOSE v_licensee_id;
IF :id_rev_licensees.licensee_id IS NULL THEN
Message('Error Generating Next v_licensee_id');
RAISE Form_Trigger_Failure;
END IF;
:ID_REV_LICENSEES.created_by := :GLOBAL.g_login_name;
:ID_REV_LICENSEES.last_updated_by := :GLOBAL.g_login_name;
:ID_REV_LICENSEES.create_date := SYSDATE;
:ID_REV_LICENSEES.last_update_date := SYSDATE;
EXCEPTION
WHEN form_trigger_failure
THEN
RAISE form_trigger_failure;
WHEN OTHERS
THEN
v_alert_button :=
msgbox ('ERROR in Pre-Insert - ' || SQLERRM, 'STOP', 'Contact IST');
RAISE form_trigger_failure;
END;
Every thing is compiling fine but at the run time when I am trying to insert a new record I am receiving the following error:
FRM-40508:ORACLE error:unable to insert record
I also think the pre-insert record is not firing at the time of inserting a new record and saving it. So I request you to please delve into this problem and suggest me how to overcome this problem. Code snippets would do more help for me. If you need any other things from me please let me know. I will see if I could be of any help in that concern because I may not be able to send the entire form as it is.
Thanks and regards,
Vamsi K Gummadi.

first of all
pre-insert fires after the implicit/explicit commit/commit_form is issued and before the real insert is submitted to the db.
i would suggest to remove the error handling part for the moment
because i believe you might be getting "ora-xxxx cannot insert null"
and also make visible the primary column to check if the pre-insert is executed.
it would be better to make visible for a while the not null columns of the table/block
i suppose that the block is insert allowed and you are using table as the source of the block and not any procedures or something...

Insert New Record in Master Data by Code

Hi guys,
I need to insert a new value in an infoobject by code creating:
1 new record in table P (data not time dependent)
1 new record in table S (SID table)
This code could be executed by many tasks in parallel and so it could create problems of concurrency in writing and in quality of the value of new SID selected.
The first question is:
THERE IS A STANDARD CODE THAT INSERT A NEW RECORD ALSO CREATING SIDS, managing concurrency in writing and reading?
The second (if not answer to first)
This is a part of my code (draft)... any suggestions:
insert into TABLE P
INSERT INTO /bic/pzck9idfl VALUES st_p_zck9idfl.
IF sy-subrc = 0.
FLAG = 1.
WHILE FLAG = 0.
    SELECT MAX( sid )
    INTO v_sididfl
    FROM /bic/szck9idfl.
    ADD 1 TO v_sid.
*record for SID table
    st_zck9idfl-sid = v_sid.
    st_zck9idfl-/bic/zck9idfl = v_idfl.
    st_zck9idfl-chckfl = 'X'.
    st_zck9idfl-datafl = 'X'.
    st_zck9idfl-incfl = 'X'.
insert record in SID Table
    INSERT INTO /bic/szck9idfl VALUES st_zck9idfl.
    COMMIT WORK AND WAIT.
IF Sy-subrc = 0.
SELECT SINGLE FROM /bic/szck9idfl
WHERE SID = v_SID
AND /bic/zck9idfl NE v_idfl.
IF Sy-SUBRC = 0.
FLAG = 1.
ELSE.
FLAG = 0.
ENDIF.
ELSE FLAG = 1.
ENDIF.
ENDWHILE.
Thanks and points to helpful answer!
ciao
C@f

Hi Claudio,
I would not recommend to do this. Please have a look for standard fm to that job of have a look into the class library to find some methods. On the first look at your code here my comments:
SELECT MAX( sid )
INTO v_sididfl
FROM /bic/szck9idfl.
ADD 1 TO v_sid.
Not a pretty good idea, as there is a number range object for getting a sid for each infoobject. If you get your sid like this, all later standard postings will fail with 'duplicate records'.
*record for SID table
st_zck9idfl-sid = v_sid.
st_zck9idfl-/bic/zck9idfl = v_idfl.
st_zck9idfl-chckfl = 'X'.
st_zck9idfl-datafl = 'X'.
st_zck9idfl-incfl = 'X'.
if you mark all these flags with 'X' you will tell the system that this record is used somewhere in masterdata or in a datatarget and you cannot delete it with standard methods.
regards
Siggi

Using combination of insert into and select to create a new record in the table

Hello:
I'm trying to write a stored procedure that receives a record locator parameter
and then uses this parameter to locate the record and then copy this record
into the table with a few columns changed.
I'll use a sample to clarify my question a bit further
-- Create New Amendment
function create_amendment(p_mipr_number in mipr.mipr_number%TYPE, p_new_amendment_number in mipr.amendment_number%TYPE)
return integer is
new_mipr_id integer;
begin
THIS is causing me grief See comments after this block of code
insert into mipr
(select mipr_id from mipr where mipr_number=p_mipr_number),
(select fsc from mipr where mipr_number=p_mipr_number),
45,
(select price from mipr where mipr_number=p_mipr_number),
practical,
(select part_number from mipr where mipr_number=p_mipr_number);
THe above will work if I say the following
insert into mipr
(select * from mipr where mipr_number=p_mipr_number);
BUt, Of course this isn't what I want to do... I want to duplicate a record and change about 3 or 4 fields .
How do I use a combination of more than one select and hard coded values to insert a new record into the table.
/** Ignore below this is fine... I just put a snippet of a function in here ** The above insert statement is what I need help with
select (mipr_id) into new_mipr_id from mipr where mipr_number=p_mipr_number + amendment_number=(select max(amendment_number) + 1);
return new_mipr_id;
end;
THANK YOU IN ADVANCE!
KT

function create_amendment(p_mipr_number in mipr.mipr_number%TYPE)
return integer is
new_mipr_id integer;
tmp_number number;
tmp_mipr_id integer;
begin
tmp_number :=(select max(amendment_number) from mipr where mipr_number=p_mipr_number);
Question:
tmp_number :=1; works..
tmp_number doesn't work with the select statement?
Obviously I'm a novice! I can't find anything in my book regarding tmp variables... What should I look under is tmp_number a
variable or what? In my Oracle book, variable means something different.
Thanks!
KT
I have the following code in my stored procedure:
Good luck,
Eric Kamradt

Inserting a new record in a database

Hi,
In my program I have to add a new record in a database. The problem is that one of the column of the database is a MEDIUMBLOB, and I have to put into that column an array of byte ( that I can convert into an InputStream ).
How can I do?

To insert Blob data (an array of byte called "data") I tryed the following code; the blob colomn is called "column2" and the table(called "myTable") has only another column ("column1"), a column of String:
InputStream inp = new ByteArrayInputStream(data);
stmt.executeUpdate("insert into myTable (column1)
values( ' value1' ); " );
ResultSet res = stmt.executeQuery("select column2 from myTable");
res.updateBlob("data", inp);The problem is that I have the following error:
Exception in thread "AWT-EventQueue-0" java.lang.AbstractMethodError: >com.mysql.jdbc.ResultSet.updateBlob(Ljava/lang/String;Ljava/io/InputStream;)V

Urgent help : how when insert new record navigation off

hi master
Sir
when i insert new record by mistake press down key and curser move to next record and my need is
When I insert new record or change any record that time my form navigation musht be off and no move to next record how I restrict to navigation please give me idea which event and what code I use
Thanking you
aamir

If u want the cursor not to move ahead from a particular field when the records are inserted or updated on that field then u can just write null to the
key-next-item trigger of that particular item.
ie IN key-next-item
null;
Hope this is what you wanted.

How to insert new record in ALV GRID?

Hi all,
   I am displaying ztable data into grid format using method SET_TABLE_FOR_FIRST_DISPLAY of Class CL_GUI_ALV_GRID using OOPS concept.now i want to insert a new record into ALV grid?
If anyone has tried then please tell me?
Thanks and Regards,
Arpita

Hi Avinash,
Thanks for replay.
My problem is solved.i did it as follows.
HANDLE_DATA_CHANGED
      FOR EVENT DATA_CHANGED OF CL_GUI_ALV_GRID
           IMPORTING ER_DATA_CHANGED
                       E_UCOMM.
METHOD HANDLE_DATA_CHANGED.
LOOP AT ER_DATA_CHANGED->MT_GOOD_CELLS INTO WA_GOOD_CELLS.
CASE WA_GOOD_CELLS-FIELDNAME.
WHEN 'ZCARRID'.
      CALL METHOD ER_DATA_CHANGED->GET_CELL_VALUE
          EXPORTING
            I_ROW_ID = WA_GOOD_CELLS-ROW_ID
            I_FIELDNAME = WA_GOOD_CELLS-FIELDNAME
          IMPORTING
            E_VALUE = ZCARRID1.
     WA_FLI-ZCARRID = ZCARRID1.
ENDMETHOD.
Using method CALL METHOD ER_DATA_CHANGED->GET_CELL_VALUE,
i am reading individual values and assinning it to WA and then insert into ZTBALE.
Thanks,
Arpita

How to insert new records in Master and detail Forms.

Hi,
I am having trouble inserting values in both master and detail view at the same time. The scenarios is I have a Dept Table (View Object-VO1) and Employee Table(View Object -VO2) both linked with a foreign key, as per Default HR schema in Oracle DB XE.
Now I want to insert new record in both Dept(VO1) and EMP(VO2) table via a New page say ( Page2 ). There is a button on Page1 with button INSERT .I can only drag-drop "CreateInsert" operation on that button for VO1 or VO2. So only text box for Dept records are enable to insert data but not Emp records. Is there a way I can insert data in both the tables at the sametime??
Thanks,
MB

Hi MuradRabbani,
You can programmatically call both createInsert Operations,
Add to your pageDef both CreateInsert Operations.
Create a button tha will call insert method from Master (VO1) and then call insert method for Detail (VO2)
Here is an Example code of calling the operations:
DCBindingContainer dcb = ADFUtils.getDCBindingContainer(); //you need ADFUtils.java and JSFUtils.java classes. You can find them in the sample applications in your JDeveloper.
OperationBinding oper = dcb.getOperationBinding("CreateInsertVO1");
oper.execute();
-----------------NOTE: at this point you should have set values that compine the ViewLink on the master in order the detail will know where to link the new record there are many ways to do it.
As an approach try to overrdi the create Method on the in the ViewRowImpl of your Master vo (VO1)
e.g.
@Override
protected void create(AttributeList attributeList) {
//before
attributeList.setAttribute("NameOfAttribute", valueHere);
super.create(attributeList);
After that you should call the operation for your detail VO2
e.g.
DCBindingContainer dcb = ADFUtils.getDCBindingContainer();
OperationBinding oper = dcb.getOperationBinding("CreateInsertVO2");
oper.execute();
The detail record will now have the values from your master automatically.
Regards,
Dimitris.

Insertion of a new record ?

Similar Messages

Maybe you are looking for