Insignia 32" Shorted out after turning it off from a electrostatic shock

I went to turn off my tv manually and received a shock I am not sure if it came from me or the tv but the tv immediately turned off. Now it has power but the tv doesn't actually appear on. The green power lot just flashed when you plug it in. I unplugged it over night and tried this morning and the same thing occurred.
I believe it is still under warranty but I cannot find the receipt anywhere after hours of looking. I need help with what I should do next to ensure I can get my tv fixed as this is a common problem with LCD's.
Can someone please help me with how I go about getting my warrantly information and what steps I need to take to get my tv repaired.
Thanks for any help!

The store should be able to pull up the receipt. How did you pay for it? Are you a reward zone member? The only method of payment that will be a problem is a cash payment if you are not a reward zone member.

Similar Messages

A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on-

A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on…

http://www.verizonwireless.com/support/knowledge-base-26502/
Above if battery pull/soft reset doesn't help. If it's boot looped may need new equipment

Ipad2, I can not sign in to imessage after turning it off and doing a hard reboot. Upon entering my info it states no network connection, but I can use it o surf in Safari and iter websites. Any suggestions. Went on with Apple, they think its my network.

Ipad2, I can not sign in to imessage after turning it off and doing a hard reboot. Upon entering my info it states no network connection, but I can use it o surf in Safari and iter websites. Any suggestions. Went on with Apple, they think its my network. All other wireless equipment can ign on without problems. This happened after I turned imessage off.

Step by step, how did you arrive at seeing this agreement?

2630 keeps discharging after turning bluetooth off

On regular use (i.e. without using bluetooth), I can use my Nokia2630 for several days without recharging. Sometimes I use a bluetooth headset connected for about an hour and then disconnect the headset and turn bluetooth off. The bluetooth indicator disappears, but the battery keeps on discharging and is empty after less than 12 hours.
If I turn bluetooth off and turn the phone off and back on again, there is no problem.
Summarized, after turning bluetooth off, the phone keeps using a lot of battery power.
Is this a techical failure, firmware issue, ...
Suggestions pleas?

I think might the bluetooth manager did not shutdown properly. and so judging from that, the battery depleted very fast but the battery indicator might not detect it as quick as it should. It happens all the time. Even my phone does.

GPS still active after turning it off

The gps works good, few seconds to fix the location but when I turn it off the gps still runs in background eating the juice... The toggle is turned off but if I check the battery life I always see the gps alive!
How to solve, except rebboting the phone everytime??
Topic edited by Rickard

Usually even if you take the tick out of "GPS Satellites", google apps still can access the gps if you had granted it permission, the best way to completely stop GPS is to go to Settings>Location Services and turn off "Access to my location" this will completely shut down GPS from everything. Just restart the phone after that and check if that solved your problem

My 2008 Macbook froze (though iTunes kept playing), and wouldn't turn off, so I had to take the battery out to turn it off. However, it is not turning on. The battery was in condition of "needs to be replaced soon", but is there any way I can start it up?

Last night, I was listening to a podcast, and my Mac froze. The mouse would not work, and neither would any of the buttons, but the podcast continued to play as if nothing was wrong. I tried to turn it off and on with the power button, but it did not respond. I had to take out the battery and put it back in.
However, the Mac is no longer starting up. The battery was old, and needed to be replaced soon. Because I have three important exams next week, and I have all of my notes on that device, I was wondering if there was a way to get the Macbook to work again, without taking the time to replace the battery? I've tried plugging it in, but it doesn't seem to charge.
Thanks!

Does the unit not run on the charger alone? (take the battery out and plug it in.)
Try an SMC Reset
http://support.apple.com/kb/ht3964

Saved texts deleted after turning iMessage off

All my saved texts were deleted after I turned iMessage off. Anyone know why and how to get messages back without restoring?

If I try my app with the DefaultGrayPhone or QwertyDevice, it works ok, the data keeps stored after a turn the mobile off, like the DefaultColorPhone used to work.Looks like you're using WTK - right? When I had problems like you describe, I typically cleaned up appdb folder.
appdb folder is usually located in WTK installation directory. In some versions it could be placed somewhere in "user documents" directory.
Typically, I simply removed "DefaultColorPhone" subfolder of appdb. To be on a safer side, you better make a backup copy of this folder prior to its deletion.
Somewhat similar problem and solution were discussed before: [click here to get to older thread|http://forums.sun.com/thread.jspa?forumID=76&threadID=5298134]
HTH

Data deleted after turning emulator off

Hi Everybody,
I developed a MIDP app that (among other things) stores a username and password, so you don't have to type them every time. This code was working fantastic, but I think I had a problem with the emulator. Yesterday morning, the username and pass were stored in the mobile emulator (DefaultColorPhone), no matter if I turned the emulator on and off, they kept stored anyway. Yesterday afternoon, while I was storing the user name and password, the computer went off. And since that moment, the username and password are not stored any longer after I turn the mobile off. If I start and exit the app (withouth turning off the emulator), the data is stored properly, but after I turn it off, the data disapears (store.getNumRecords() returns zero). I believe something got damaged, but I don't know how to fix it. I already deleted de db and create it again, but nothing changed.
If I try my app with the DefaultGrayPhone or QwertyDevice, it works ok, the data keeps stored after a turn the mobile off, like the DefaultColorPhone used to work.
Do you have an idea on how to solve this?

If I try my app with the DefaultGrayPhone or QwertyDevice, it works ok, the data keeps stored after a turn the mobile off, like the DefaultColorPhone used to work.Looks like you're using WTK - right? When I had problems like you describe, I typically cleaned up appdb folder.
appdb folder is usually located in WTK installation directory. In some versions it could be placed somewhere in "user documents" directory.
Typically, I simply removed "DefaultColorPhone" subfolder of appdb. To be on a safer side, you better make a backup copy of this folder prior to its deletion.
Somewhat similar problem and solution were discussed before: [click here to get to older thread|http://forums.sun.com/thread.jspa?forumID=76&threadID=5298134]
HTH

Can't reboot after turning PC off.

Hello,
my mobo is the MSI P45 Neo-F with the original BIOS (1.0?). From the very installation I have had to move the CMOS jumper in order to clear it and be able to boot the PC. After that everything works fine until I turn it off and I have to do this all over again. Has someone the same problem? Does it require a BIOS update or is it a problem with the battery?
Thank you for your answer
MSI P45 Neo-f
2GB 1033GHz Corsair memory
Intel Core 2 Quad Q9550
Windows Vista 32bits Home Premium
(not into overclocking at all)

http://global.msi.eu/index.php?func=prodcpusupport&prod_no=1482&maincat_no=1&cat2_no=&cat3_no=#menu
You may need BIOS update, that can cause your issue too:
Yorkfield Q9550 (2.83GHz, C1, 95W) 1333 8.5 SINCE 1.2
Yorkfield Q9550 (2.83GHz, E0, 95W) sample 1333 8.5 SINCE 1.3
"my mobo is the MSI P45 Neo-F with the original BIOS (1.0?)"
Look here how to check current BIOS version:
https://forum-en.msi.com/index.php?topic=113146.0

Printer diconnects network after turning it off

hi i have just bought this printer and manually installed it using cd
but after i turn it off i have to manually install it again to be shown on network
how to solve that ?
i want to turn it off and turn it again whenever i want
the wireless blue color was active and i tried everything please help
also thre is something so stupid when i print via air print on my iphone using hp print or any other app it print so slowly

Hello @zageng,
Welcome to the HP forums.
I understand that you are having a problem with your P1102w staying on your wireless network.
I would like to help.
Try going through the following document.
HP Printers - Printer Does Not Maintain Wireless Connection
If you need further assistance please let me know.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Iphone hanges after turning it off

When i turn off my iphone, it takes two houres before i can make a call or text a message after turning it back on. Have somone the same problem? or soulution?

When the iPhone is in recovery mode, the only thing you can do with it is to restore it. Sorry
Taken from http://support.apple.com/kb/HT1808
When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See [this article|http://support.apple.com/kb/HT1414] for more information.
Message was edited by: Jefe Tapa

IPhone keeps crashing after turning it off

Hello!
I got a question. I just bought my new iPhone 3GS from AT&T couple days ago. It has 3.1.2 firmware. Every time I install some new apps,games, ringtones, wallpapers, or anything, it crashes after I turn it off and then turn it on. After turning it on, it shows a little arrow and iTunes icon, telling me to connect it to the computer. After I plug it in, it tells me that: "itunes has detected an iphone in recovery mode", and I have to recover it, and start from nothing again. How can I fix it?

When the iPhone is in recovery mode, the only thing you can do with it is to restore it. Sorry
Taken from http://support.apple.com/kb/HT1808
When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See [this article|http://support.apple.com/kb/HT1414] for more information.
Message was edited by: Jefe Tapa

Airport Card Disappeared After Turning Airport Off

I successfully used my MacBook Pro to connect wirelessly to the 'net for 2 hours, then turned Airport off for security purposes. I came home and tried several times -- unsuccessfully -- to turn Airport back on (to use my home Airport Express.) The wireless transmitter was functioning, as established by a successful connection by my iPhone. I rebooted and attempted to turn it on several times -- no joy. I tried removing /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist and restarting, and the menubar icon (and About This Mac - More Info) claim that no Airport Card is installed. It seems unlikely that the card would die just because I turned it off. Any ideas?

What Mac are you referring to? (Part of your info at the bottom should at least say what model). Turning it off for security purposes? In any case check System Profiler>Network>Airport Card and see if it shows up there. You might want to post in your Mac model specific forum area.

TouchID for App Store purchases doesn't work after turning phone off and back on?

TouchID for unlocking my iPhone 5s works 99.9% of the time. It's fantastic. However, using it to authorize App Store purchases, NOT in-app purchases, is less fantastic. In my case, it seems like every time I turn my phone off and back on, the phone forgets it's can use TouchID to authorize app purchases. I have to go into Settings -> General -> Passcode & Fingerprint -> (enter my passcode) -> Fingerprints -> iTunes & App Store, and turn that off. Then I have to turn it back on and enter my Apple ID password. Not exactly a quick procedure. The good news is that once I turn it back on, it works like it's supposed to until I turn my phone off and back on again. If it can remember to use TouchID for unlocking the phone, why can't it remember to use TouchID for authorizing App Store stuff? Am I missing something?
Anyone else experiencing the same thing and/or have a solution? Thanks!

SKAshanchi wrote:
From this article:
http://support.apple.com/kb/HT5883?viewlocale=en_US&locale=en_US
Note: Touch ID cannot be used for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
I don't have any restrictions set on my phone at all.

HT201412 I cannot get past push notifications in find my friends app. just keeps showing push notifications plus cannot get out without turning phone off. please help.

I cannot get past push notifications in find my friends app. Just keeps showing push notifications over and over. Plus I have to
turn phone off to get it off screen.

Hey MMIC880,
Welcome to the BlackBerry® Support Community Forums.
In BlackBerry® App World the amount listed for Top Free, Top Paid, New Arrivals, Top Rated is 25, it does not go higher.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Insignia 32" Shorted out after turning it off from a electrostatic shock

Similar Messages

Maybe you are looking for