Insite editing of an image....?

Hi All,
The TagReference and developer documentation seems to miss an obvious use case/example for editing of an image within the Insite UI.
Has anyone done this?
My template has an 'A Feature' image at the top of the page above the main content body stored in an Attribute named RelatedImage (which is associated with an Attribute Editor of PickAsset).
To output the image I use render:getbloburl which is fine, but I'm not sure how to enable this to be editable to content authors in the Instie UI.
Thanks,
Darren

Uninstall and reinstall PS CC 2014. This fixes things for most people with this problem and there are many.

Similar Messages

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Editing non-raw image files in Adobe Photoshop

Hi,
I am currently digging into the world of Lightroom and setting up a work flow which in my case needs to include editing non-raw files in Adobe Photoshop.
Please bear in mind that I am quite new to Lightroom so I am not sure I have found all shortcuts and settings to manipulate.
I will explain what I trying to do (and why) and hope that the community can comment and help put if possible.
I myself shoot almost everything in RAW format, and I have been using Photoshop (PS) and Camera Raw (ACR) for some years now. I am now on Photoshop CS6.
But now the amount of images to handle requires a CMS, so I went for Lightroom 4 - hoping/believing that I would find an effective and efficient work flow integration between the two Adobe products.
But I am more and more also helping others to enhance their images, and I most often get jpg files as image source.
I am used to using PS layers, filters, smart objects etc extensively to do what I want to do.
OK, I admin that I already use ACR quite a lot, and sometimes even as the only tool even for jpg images.
I have began diving/snorkeling with friends and often the images we bring back home is in jpg format, and so far I still believe that the best image "restoration" can be done in Photoshop using adjustment layers, channel mixing and filters to get satisfactory results.
So now on to my concerns and issues:
1) Lightroom user interface efficiency - "Edit in"
When I want to edit a jpg image in Photoshop I :
action
comment
- left click image to select it
ok, I agree this is needed
- right click image to bring up context menu
ok, I agree this is needed
- move cursor to "Edit in", and wait for another context menu
ok, ...
- click "Edit in Adobe Photoshop CS6"
Yes that's want I want
- Lightroom presents the "Edit Photo with Adobe Photoshop CS6" selection menu.
Yes I know, I saw it the last
nnn times I did it
- if I need option "Edit a Copy" or "Edit Orginal" I move cursor again, left click to select ,
   move cursor to Edit and left click
- and finally Lightroom sends the jpg image to Photoshop as a jpg image
No, I want a tiff file since that
is what I have set up in
preferences
OK, I know that I can also use the keyboard instead of mouse for this, but the number of actions required from my side is pretty much unchanged.
For a quick working, Lightroom and PS skilled person, this is just annoying.
Is this effecient?     Well it depends. For Lightroom beginners this is good. But for me it is a true annoying obstacle
2) Lightroom "Edit in" - is it effective
Is this effective?     I say no.      I have specified in preferences that I want PS to receive a TIFF file in Adobe RGB 1998 color space
                                                   Also, I cannot change to TIFF in PS without losing the link between the two images. (If I do, the new TIFF file is not imported by Lightroom, so I have to that manually)
I have found out that I can choose the path "Select image - select "Open as Smartobject in Adobe Photoshop".
This will give me a tiff file, and when saved in PS the jpg and tiff files are linked and Lightroom has automatically imported the tiff file into the Catalog.
What I need / what I would like to know / what I would like to have:
* Is there a (customizable) keyboard shortcut that enables me to: Select Picture + Use shortcut - and then I end up in Photoshop (with the Edit option I use 90% of the time) ?
* Is there a preference that I can set so that jpg images also are opened as tiff files in Photoshop per default?
* Is there a way to select multiple images and launch them all in Photoshop (and keeping the link between the jpg and tiff files) ?
* I would like a preference setting allowing me to choose that any new file coming back from Photoshop (after "Edit in" ) is written to a sub-folder, or to a specific folder set by me.
   This would align with my work flow for jpg handling, where the jpg is the "original" and the tiff file is what will eventually end up as image "master" (from where I print, or produce web / HDTV jpg's).
* Is there a way to automatically launch a Photoshop Action on the file coming from Lightroom?
   This would also help in my work flow. E.g. I have currently 100 jpg's and avi files which are UW (under water shots) and the adjustment layers I build are always the same (to start with).
   Of course, I can launch the Action once I am in Photohop - but again, doing 1-5 times is ok, doing it more than 100 times ...
* I am skilled computer programmer - can I use Lightroom SDK to write plug-ins to achieve the above enhancements ?
Regards
Bosse W

* Is there a (customizable) keyboard shortcut that enables me to: Select Picture + Use shortcut - and then I end up in Photoshop (with the Edit option I use 90% of the time) ?
-- The keyboard shortcut Command/Ctrl+E will perform steps 2-4 in your above list. You only have to click the Edit button, as the last choice (Edit Original, Edit Copy, Edit Copy with LR adjustments) will be remembered.
* Is there a preference that I can set so that jpg images also are opened as tiff files in Photoshop per default?
-- No, a JPEG in Lightroom will always open as a JPEG in Photoshop. If you have made changes to the file that are not supported by the JPEG format (e.g. added a layer) when you go to save the file, it will be saved as either a TIFF or PSD, based on the preference in Lightroom.
* Is there a way to select multiple images and launch them all in Photoshop (and keeping the link between the jpg and tiff files) ?
-- Yes, select all the files you want to edit, and use the keyboard shortcut, menu command, or right-click context menu command.
* I would like a preference setting allowing me to choose that any new file coming back from Photoshop (after "Edit in" ) is written to a sub-folder, or to a specific folder set by me.
   This would align with my work flow for jpg handling, where the jpg is the "original" and the tiff file is what will eventually end up as image "master" (from where I print, or produce web / HDTV jpg's).
-- No, there is no automatic way to do this. If you use the Edit a Copy method, the copy is created instantly in the same folder as the original.
* Is there a way to automatically launch a Photoshop Action on the file coming from Lightroom?
   This would also help in my work flow. E.g. I have currently 100 jpg's and avi files which are UW (under water shots) and the adjustment layers I build are always the same (to start with).
   Of course, I can launch the Action once I am in Photohop - but again, doing 1-5 times is ok, doing it more than 100 times ...
-- Yes and No, this is not something that can be setup in Lightroom, but you can set it up in Photoshop using the Script Events Manager.
* I am skilled computer programmer - can I use Lightroom SDK to write plug-ins to achieve the above enhancements ?
-- Yes: http://www.adobe.com/devnet/photoshoplightroom.htmlhttp://www.adobe.com/devnet/photoshoplightroom.html

How can I edit a still image so that I can float it over the video?

I would like to edit a still image so that I can float it over the video - How would I save the image in Photoshop so that just the image and not the background can be imported into Final Cut and the footage behind it still shows up?
Thanks

You need to either create an Alpha channel or cut out the area of interest and paste it into a transparent Photoshop document. You can save the former as PSD, TIFF or PNG. Save the latter as TIFF with transparency enabled (shows up in TIFF Options at step 2 of the save dialog).

Editing Error - This Image cannot be rendered for editing...

Editing Error - This Image cannot be rendered for editingbecause Aperture doesn't support the image format.
Thats the message that appears when I'm exporting to Photoshop CS5 (I tried CS4 too), or even other Plug-ins such as Silver Efex Pro...
That had never happened before, and I use Aperture for over 2 years.
Its RAW image format from the same camera and all, nothing has changed. just randomly decided not to export anymore to other programs, Regular exporting works, so it's nothing to do with exporting it self, but the communication between aperture and other softwares, I think.
I've seen some other people having the same problem, does anyone have a take on it, in how to solve this? I can't edit anymore outside of aperture. (of course not including the idea of exporting and doing everything away from aperture, which is totally not viable with the amount of content to be edited and not being in aperture anymore.)
I've tried deleting the preferences, tried repair permissions of the Library, and still didn't work.
Didn't go to the other 2 options (repair and rebuild database) because it would take days if chosen, and still not sure that would solve. or if has anything to do with.
Any light anyone?

What kind of file is it? (i.e.jpeg, Canon RAW, Nikon RAW etc..)
As a workaround until you get the issue fixed, why not reimport the image from the original file, lift and stamp any adjustments you've made in Aperture, and see if the same problem occurs?
A

Preset Issues with 'Edit in Photoshop' image

Hi guys, I'm running LR3 and CS5 on a MBP Lion, and I'm working directly with RAW files. I have adjusted the images in LR and used 'edit in photoshop' to correct blemishes on some photos. I want to apply some presets at the end to render a couple of different looks (B/W and Vintage) to the final edited image. However, I find that after the file comes back from PS, it looks good, but the photo gets 'normalized' and the develop module tools get reset to zero. Hence my presets totally blow the 'edited in photoshop' image while it works just fine on the original raw.
I have also tried to work on the original image prior to any LR adjustments. Same thing, after coming back from PS, both stacked files look similar, but at the time of running the preset, the 'edited in photoshop' file gets blown out.
I do not have any auto adjust settings turned on. No presets running on import/export. What am I doing wrong?
I really appreciate any help!
-Liz

when you edit a RAW file in PS and save it you will have a demosaiced file (TIF, PSD or JPG).
they behave different then RAW files. so sliders will probably have a different effect on a JPG file then it will have on a RAW file.
it will not be possible i think, to get the EXACT same look when you apply a preset afterwards.
for example the highlights will not have so much headroom in a TIF or JPG ... compared to the original RAW.
so i think the best is to apply the presets first, render the files with the LR settings and open in PS as smart object.

How do you edit the template image that appears at the top only in portrait mode?

I am using a customized version of the iBooks Author template which has the space image. I have replaced the images for the book cover, chapter and section. But I noticed that when you rotate the ipad to view the entire TOC, the original space image is still there. How can I edit the template image that appears at the top of the Table of Contents only when you rotate the ipad in portrait view?

I just tried w/that template - switched to Portrait mode...tapped once to select that image....cut - gone. Switched to Landscape...not there. Back to portrait...still gone.
What process did you use?
Can you repeat your issue with a fresh book?

I've edited an image on Lightroom and gone back and edited again. Is there anyway to get back to that original edit of the image?

I've edited an image on Lightroom and gone back and edited again. Is there anyway to get back to that original edit of the image?

In the History Panel (on the left) of the Develop Module, click on any previous edit to see what the photo looked like at that step.
If you are going to regularly want to see two versions of edits on a single photo, consider using either virtual copies or snapshots.

Edit in Photoshop - Image Reset?

It appears that when image is opened in PS via "Edit in" command, all develop settings are removed and image is back to as-shot colors, contrast, etc. How can I avoid this, and edit/print the image as it appears in LR?

Not as far as I know. PSE opens a new image in the editing window according to its own internal formula for size.
Ken

Edited hyperlinked shape images not hyperlinking properly when published

At my website:
www.trianglepolysteel.com
I've tried to add and edit hyperlinked shape images at the top of the page, namely "The PolySteel Systems" and "FAQs". No matter what I do--bring to front, recreate a brand new image, copy and paste one I know works--the published version does not hyperlink properly. I unselect "make all hyperlinks inactive" in the hyperlink inspector pane, rollover my mouse to ensure that all buttons take me to the proper place, then click them to prove it. Works in iWeb, not on the published page.
Does anyone know how iWeb creates the code? When I save changes I've made, does it rewrite code for the entire page, or does it plug in edits at the end of the existing code? When I go in to view source in safari, it looks like it put the two edited/added images in a different location.
Help! Visitors/potential customers are missing a valuable link on my site.
Bradley

OT,
Yes, each is its own image, as making one text box and hyperlinking each word/phrase results in the unchangeable (arrrgh!) grey underlined text that changes to red on rollover.
I've already been experimenting with exactly what you mentioned. I just tried shrinking all the image boxes, without encroaching on the text, so they would clearly not overlap. I'm publishing to me.com for these experiments so I don't have to keep publishing the entire site to a folder, then ftping to my server. Here's the page I just experimented with:
http://web.mac.com/bradleyoder/iWeb/Triangle%20PolySteel/WhatIsPolySteel.html
In iWeb, all links are good to go, no overlapping, etc. Curiously enough, on this page, there are even more dysfunctional hyperlinks with those image boxes.
Any further thoughts?
Bradley

Hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Printing or Editing Off-Line Images

Hi,
I am looking for the best way for editing or printing images that have been previously moved/archived to CDs/DVDs when using PSE 3/4 Organizer. As I understand it once you bring back an image to edit it, the archived version is brought back online., and the one on the CD is basically removed from the catalog. Is this correct?
How does all this work if you are dealing with Version Sets, all of which have been previously archived to CDs?
What if you only want to bring an archived image to print it? In this case, is the high resolution image just temporarily loaded to make the print? I vaguely remember that the answer to this is yes, but I am not positive.
And what if you wanted to make a slide show but did not want to start with the resolution of your proxies?
I do know that I can go and find the answers to each one of these questions myself, but I am hoping to save a little time and possibly screwing up somewhere by asking the question before trying things out. I am also interested on how others are doing the above.
TIA
Don S.

Barb,
Thanks so much for the simple solution. I have tried it and it seems to do just what I want. Let me list the steps to make sure I did what you said.
1. From the Organize mode, I select the off-line photo
2. Click on Go to Standard Edit. I get the message re. picture is no considered on-line.
3. After the image is oopened in the Editor, I go back to the Organizer, click on the Undo arrow. The gold CD icon on the picture, which was not there now comes back, but the red strip with the lock is still over the photo.
4. I go back to the Editer, make my changes and then use Save As with a new name.
5. I close the photo in the Editor, and automatically am taken back to the Organizer, where there is no red stripe, but now two photos in the Photo Bin, the one off-line with the CD icon in the top left corner, and the edited version right next to it that is on-line.
To be honest, I only did Steps 1-3. I am presuming that Steps 4-5 would be as stated. Is this how the whole process works?
PS I did confirm that when you bring an off-line image back in to print it, it is only brought back temporarily and is still considered an off-line image after being printed.
Again, thanks for your initial answer Barb. I now need to see how Version Sets affect the above, if at all.
Don S.

After editing a RAW image in PE13 I can't get it back into my iPhoto library. If edited in iPhoto first and sent to PE13 for adjustments, it can be sent back to iPhoto library. Ideas?

After editing a RAW image in PE13 I can't get it back into my iPhoto library. If edited first in iPhoto, and sent to PE13 for adjustments,
I can get it back into my iPhoto library. Ideas?

Thanks for answering my question. I always have had RAW checked to an external editor which is PE13 on my Preferences panel in iPhoto.
I probably didn't make myself clear. When I send an ORIGINAL RAW untouched, unedited image to PE13 and do the editing and the
adjustments- (it looks great) and then try and SAVE it and forward it to my iPhoto library, it will not be sent. On the other hand if any editing
at all is first performed in iPhoto and then sent to PE13 for adjustments, and I SAVE it, it asks if I want to Replace this new edited image with
what already exists in my iPhoto library, I click REPLACE, the little wheel spins, I go to iPhoto and the new image is there. PE13 does
accept an original RAW image for editing because it will save it in PE13 in the RECENTLY EDITED column. Ideas? I need to keep my iPhoto
library intact. Ideas? Thanks.

FAQ: When I apply edits to an image using Revel, does it save a new file or just the edits?

Q. When I apply edits to an image using Revel, does it save a new file or just the edits?
A. Revel cloud keeps a copy of your full resolution originals. Edits in revel are non-destructive, so your original is always preserved (unedited). When you export photo (MAC) Save to Camera Roll (iOS), that's when Revel applies your edits. On iOS the preview is used. on MAC the full resolution of the original is used to generate the new edited photo.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

How can i find Photoshop to edit my own image?

How can I find Photoshop to edit my own image? I have seen a lot of learning videos,

I'm not sure I understand the question. Have you purchased and installed Photoshop, but don't know how to start it on your computer? Let us know what version of Photoshop you have and if you are usinga Mac or a Windows machine.
If you don't already have Photoshop, you can find it on the Adobe web site at http://www.adobe.com/products/photoshop.html

Insite editing of an image....?

Similar Messages

Maybe you are looking for