Insp.lot after rework order confirmation

Dear all,
My client requirement:
they want insp.lot when they confirm rework order.I can activate inspection to 531 mvt.type.but they are using 531 for other purposes also.so can i do any setting in Rework order type so that it should create inspection lot.
it is urgent plz reply soon
thx&regds
prasad

Hi,
It is possible to generate inspection lot of inspection lot origin 03 if you configure in OPL8 transaction. It is used for inprocess inspection and its not stock relevant.
As you want to generate inspection lot for By porduct ( 531 Mtype) above config setting will not work for you. I suggested new movemet type as you mentioned that 531 mtype is used for some other purpose.
You also mention the if user forget to enter the custom movement type . As they need to confirm the by product they need to user 531 or custom movement type. you can remove the authorization for 531 movement type so that they can not use this.
Regards
Sanjay

Similar Messages

  • Is possible to create a TO automatically after production order confirmation?

    Hi all
    I have just a question in order to know if we can configurate a procedure to a Production Order, so my question
    is possible to create a TO automatically after production order confirmation in a standard enviroment?
    Thanks in advance for all your comments

    Hi Gurus,
    Thank you for your help in this case.
    Process:
    The customer create a production order in CO01 and then they confirm the order in CO15, after confirmation TR is created ( we can see this in LB10 ) and negative stock is created (  we can see this in LS24 ).
    Requirement:
    They are asking to create the TO automatically after the production order confirmation. Negative stock is afecting the process.
    Workaround:
    They are creating the TO in background in LB10. ( negative is fixed )
    Question:
    Can we create the TO automatically after confirmation in standard configuration?
    if no ,  how can we confirm this TO .using a JOB option?
    TR created after confirmation
        TR header
    LS24 negative units.
    Regards!!
    Ronald

  • Inspection lot for rework order

    Hi QM Experts,
    I have a question about the rework order.
    For the original order i use inspection type 03.
    After found the defect, i create the rework order using CO07.
    My question is how to create the inspection lot to check the rework order ?
    Thanks in advance,
    Helly

    Hi Helly,
    I guess you are using a specific order type for the 'Rework'. Check the configuration under IMG:
    Quality Management > Quality Inspection > Inspection Lot Creation > Inspection for Manufacturing Order.
    For your plant/order type combination check assignment of 'Inspection Type' on the 'Planning' tab (it's near the bottom)
    Hope that helps.
    Colin

  • GR after production order confirmation

    Hi pp guru...
    kindly suggest me how i will check GR after conformation.....GR should be after confirmation.
    kindly suggest me how i will do
    regards
    aqueel

    Hi,
    Find below the reply from the forum member Mr. Tara Bhapkar:
    1. Use Tcode BS02 ( Customising User status profile). (eg:PP000001)
    2. Select the order type which you want to configure (eg:PP000001) and choose "Details" button.
    3. In the User status table do the following:
    a. In the status no field type"1" , status field "Sta1", short text"GR not allowed", lowest no "1", Highest No "2". Mark a tick in the initial stats check box.
    b.Next line, type status no field "2" ,status field "sta2", short text"Gr allowed", lowest no "2" , highest no "2".
    4. Select the STA1 line and choose details. select the "create"button.select the "GR for prod order", mark "forbidden
    radio button" and "not active ratio button".
    5. Select the STA2 line and choose details. Select the "create" button. select "confirm order", mark "allow radio button" and "set radio button" Next choose "GR for prod order" , mark "allow radio button" and "set radio button".
    6.Save.
    7. Now assign your Status profile" PP000001" in the production order type (OPJH) -
    Status profile header:- PP000001
    8. Create a prod order and check whether the required scenario is working.
    Hence it will not allow you to do GR without order confirmation
    When sometimes you directly want to do GR withought confirmation you can directly assign sat2 to the production order through co02.
    Also to read further from the thread, follow the link below:
    [Thread - BS02|Re: Prevent Goods Receipt without confirmations;
    Hope it helps,
    Regards,
    Rohit.

  • Rework Order Problem

    Hi Experts,
    Please suggest me for the following problem:
    1. I have created Rework order (settlement rule against parent order)
    2. Confirmed the Rework order
    3. GR done for the Parent order (MB31)
    Here the Parent production order quantity is getting reduced. But it should not happen because it is not the actually confirmed.  I am not getting any link between the Rework order confirmation and the GR for the Parent Order.
    Please explain me where i am doing mistake.
    Thanks &Regards
    Bala

    Hi All,
    I have maintained seperate order type for Rework. 
    I have followed the procedure what Mr.Brahmankar mentioned.
    The problem is when i do the GR against the parent order it is reducing the parent order quantity.
    In OPL8, for the rework order type I maintained the following settings:
    1. Planning Tab :  Selection ID 01, routing selection 4, sequence exchange 1, Task   list type S.
    2. Implementation Tab: Documentation of goods movements - All 4 are marked tick.
    When i create the rework order the following error i am getting      "No task list for select.ID 01 for auto. task list selection found"
    Please correct me where i am doing mistake.
    Thanks & Regards
    Bala

  • Inspection Lot display after Order confirmation

    Hi All,
    My requirement is to display Inspection Lot no under assignment tab in display prod. order after GR.
    How to get Inspection Lot no?
    what are the settings to be done?
    Rgds,
    Yogesh

    Hi
    The Inspection lot no will be displayed in Prod order only if insp type 03 (In Process Inspection) activated in QM view of Material Master for a material when the prod order is released.
    For Insp type 04 (GR after Production) we can see the insp lot in QA32. It can not be displayed in Prod order.
    Regards
    Brahmaji

  • Rework Order after QC Rejection......for Production against Sales Order

    Hi All,
    Can you help me in the following issue.........?
    I have Make to Order production scenario. After Production Order is confirmed material goes for QC inspection and some quantity get rejected ( need rework).
    Since I have confirmed total quantity in order confirmation, if I create a rework order with reference to the sales order that will increase the production qty by the rework qty. But I need a rework order to rework on the rejected quantity.
    Let me know how to resolve the issue.
    Thanks and Regards,
    Samar

    Hi!,
    From your mail it seems that you are doing quality inspection on GR (inspection type 04). Please carry out following steps:
    1) At the time of quantity posting on usage decision please put rejected quantity in field against retuen to vendor (i.e. carry out 122 movement for the rejected material). By doing this you will find the delivered quanity on prod order reduced by the rejected quantity.
    2) Now create a production order without material (CO07) for the rejected quantity and put the original order as cost receiver in the settlement rule so that all the cost incurred during rework will be settled on original order.
    3. Confirm the origianl order / Final operation again for the reworked quantity and make the GR again. This will again create a new inspection lot.
    4. Carry out the result recording and UD for this new inspection lot.

  • Rework order Operation Confirmation and quantity posting to main order oper

    Hi Friends,
    I have confirmed first operation of production order by CO11N. While confirming the operation, i entered 5 qty. as Rework Quantity. Due to trigger point function, Rework order gtets generated. After completion of Rework , i confirmed rework Order. Now i want to add this Rework Quantity in the second operation of main order . So i can be able to make confirmation of whole quantity of second operation. How to do this?
    Normally system takes the first operation yield quantity as next operation quantity for confirmation.
    Waiting for Reply!
    Thanks!

    Dear,
    If a separate rework order is created using the trigger point, the system assumes that both the rework and all subsequent operations are processed via this rework order. As if first operation confirmed as 10  5 as rework quantity.
    It means that you can second operation you can confirm as 5 only. So you need to add all operation in reference operation set so confirm all operation quantity here and remaining quantity in main order. So your confirmation yield will remains same.
    Or it is only possible to return the successfully reworked quantity to the original order if the quantity check which is executed against the confirmed yield of the predecessor is deactivated using Customizing of the confirmation OPK4. In this case, only the confirmed yield is indeed proposed without the confirmed rework quantity. However, with the quantity check being deactivated it is allowed to overwrite the default value with a larger quantity.
    Note that you cannot enter a goods receipt for the rework order since it is defined without header material. Instead, you can enter goods receipts for the original order manually.
    Regards,
    R.Brahmankar

  • Ristrict Cancelling Process Order Confirmation (CORS) after FI MM period cl

    Showing current date as posting date after Cancelling Process Order Confirm:
    Issue with FICO and PP :-, after settlement (ko88) and all period end closing, system still allowed doing Cancelling Process Order Confirmation (CORS) and Showing current data as posting data
    For example:
    My order created on 30th September 2010 and order confirmed on the same day ie my posted date (30th September 2010)
    I have done order reversal on 3rd October 2010 and posting date should be 3rd October 2010 but system showing current data as posting data. Can you please guide me why this unusual behavior happening

    Hi Arun
    Is this  congif change will help me
              1)In BS22 first search for TECO.
               2)Double Click on TECO.
               3)New entry.
               4)Now search FI posting.
               5)Select status as Prohibited
    My Requirement : Ristrict Cancelling Process Order Confirmation (CORS) after FI, MM period closed, and Materail Ledger done
    I want to ristrict the (CORS) reversal of Process Order Confirmation after FI MM ML closed
    right now as per standard its giving warning masage as " Posting with carent date YES or NO, if you say YES then system doing CORS on system carent date, i want to restrict it
    Is above steps you refered will help me
    please confirm
    Regards
    MKbinnal

  • Inspection lot not getting create for 01 Insp type after Intransit

    Hi Qm Gurus,
    I have a Material 'A' which is producing in the plant IN05 and transferring to IN06 plant. We have Scheduling agreement PO for this. After Scheduling Agreement we are doing Transferring the Goods thro 351 GI Movement type. So now the parts will be there in transit.
    So now when I receive this goods in IN06 thro 101 MT, Insp lot is not getting create, it goes to Unrestricted. If I create a std PO for the same when I receive the goods thro 101, it is posting into Insp lot. But after 351 & if I do 101 material is not going into Inspection. Pls advise.
    I checked the Insp type 01 Active for IN06, Quality info record is fine, Quality plan also fine. Pls let me know whether i am missing something?

    Hi ,
    Please activate inspection type 08 stock transfer ..
    If this inspection type is active then during stock transfer lot gets generated.
    Also check QM active for this perticular movement in custamizing setting.
    Regards
    SANIL

  • Individual qm order for each insp lot

    Hi, i want system to generate individual qm order for each insp lot generated. please advise what are the steps involved here. thank you.

    Dear Raju
    Please follow the steps
    1) Maintain tick for individual QM order in Material master in QM view
    2) SPRO > QM > Quality inspection > Inspection lot creation >  Maintain inspection type >  order type as QL02
    when the inspection lot is created QM order will be created and you can post the cost
    But make sure that the inspection lot has an account assignment  (cost center specified in the purchase order )
    Regards
    Gajesh

  • Recalling Process Order confirmations after selecting Last delivery indicator in error

    Hello,
    I was completing an order confirmation and hit the last delivery indicator. I submitted my confirmation but noticed I had not completed my amount. When I tried to pull the order back up,. I was not able to. Is there anyway to recall this order? I am new at my job and I'm just learning so I just went back through my notes and realized I was not suppose to use the "last delivery indicator". Any suggestions on how I can fix this or retrieve my order so that I can correc the amount and confirm the order would be very helpful.
    Thank you in advance,
    Rita 

    Hi Rita
    If your question has been answered, please close this thread selecting the correct answer.
    See this blog for more details:
    How to close a discussion and why
    BR
    Caetano

  • Error when creating rework order

    Hi
      When I am creatng a rework order for a material it is showing an error message that referance doesnt exist why is that error coming

    Dear Pradeep,
    Cofiguration Settings For Rework order
    1) just copy std re-work order type & give new name as u required in OPJH
    2) in OPL8, copy existing rework order type & give ur re-work order type & plant & save
    Master data for rework order
    1) CA11 - Creating reference operation set
    1) after Executing CA11, just enter without giving data in initial screen
    2) usage - 1, status - 4. from lot -1, then click on operations
    3) then give work center & descrption
    4) Double click on Description, then give timings for setup, machine & labour & save
    Rework order Creation
    1) Normally rework order is created by t-code CO07
    2) while doing confirmation of header material in CO11N or CO15, we give re-work quantity
    3) then creat re-work order in CO07
    4) in CO07, give plant then order type (rework order type) then enter
    5) materail description, quantity to be reworked then date enter
    6) system will ask u refernece opeartion set (it should be created before only in CA11)
    7) then give the referce operation set Number then system will take u to settelment Rule
    8) here for CAT, give as ord, then in settelment receiver give ur header order number then percentage as 100 %
    9) then clcik on component overview icon, then give ur BOM componets (which to re-worked & assign an opeartion to it)
    10) then save the order
    11) then do the confirmation to re-work order
    12) then do GR to header order & settelment will take place to header order only not to re-work order
    Note : For rework work, GR will not take place
    Regards
    Madhu

  • COGI error generated while collective order confirmation

    hi ALL, this is the real  task for all PP GURUS.
    the issue is related with collective order confirmation.
    client is using customised program ZPP_CONF to confirm the collective order which is based on the sap spro program CORUPROC.this include automatic goods receipt,backflush & actual cost update .as user use zpp_conf for confirmation all this actions happened in backgruond.
    now after using ZPP_CONF . the confirmation is not happening .instead of that it is going in COGI where they are getting a error massage which is as follows
    "You have no authorization for this transaction with movement type 101u201D
    this error continues for 10-15 minutes after doing refresh it goes. & confirmation happens.
    this is not happening for all orders but for 8 out of 10.
    users have proper authorisations.
    they have enough stocks in st. locn.
    they are loosing lot of time becuse of this.
    HOW CAN I RECTIFY THIS ERROR GURUS?
    when i search i found this is written in the CORUPROC documentation
    Incl. incorrect goods movement: Not only preselected but also incorrect goods movements that are usually processed with transaction COGI are  selected and processed. 
    VENKADESH

    Hi,
    The Program CORUPROC only can adjust the Errors in Goods movements. It can not handle the Table Locks..
    The Program CORUAFWP, can taek care of table locks also, apart from the Errors in Goods Movements.
    Refer below thread for similar type of problem..
    COGI errors
    Hope this helps..
    Regards,
    Siva

  • Releasing credit sales order confirmation

    Hi
    We are using credit limit check. If the customer has credit issues, the sales order will get retained and the confirmation is lock. The issue is that after the released of the sales order the confirmation is not being unlock and the sales order is not taken into account by the filter of the backorder process.
    Where should I verify that the sales order confirmation field is unlock at the moment of the credit release process?
    Thanks a lot.

    Two places you can check in the sales order, click on the document flow button on the top. Then click on status button, expand the header status. Here you can see the credit status. The other place is go to menu Goto -> Header ->status. Here you can see the credit status field carries relevant information.
    Regards,

Maybe you are looking for