Inspeciton point results

can any body done inspection points results through bapi or bdc
is it possible against inspection point results recording becuase here process order is monthly so month start day they raise the process order against process order 03 inspection lot will trigger based on the lot i maintain the point like ( location shift date and time ) so every shift they check the Moisture content and another critical characteristics.
can any body done kindly guide me how we are uploaded inspection characterstics.

not sure but explore bapi
BAPI_INSPOPER_RECORDRESULTS

Similar Messages

Runtime error for Inspection Point Results Recording

Hi,
I am changing the already done Results Recording for using already used Inspection Point.
I am getting the runtime error. Anybody came across such error?
Regards
Ramakanth

Hi,
In the in-process inspection I am using Inspection Points. Initially I have done Results Recording once with quantities.
And then again I wanted to change the quantities for the same Inspection Point. So, I went to Results Recording for same Inspection Point and changed the quantities and saving. At this event I am getting Runtime error.
I have even deactivated one BADI INSPECTIONLOT_UPDATE and tried again. Even then I am getting same error.
Ultimately my requirement is this:
My client wants UD at operation level. They want only quantity which is accepted in Results Recording to be moved to the next operation. In the operation level confirmation the system should only accept the quantity which is accepted in Results Recording.
Any suggestion in this regard.
Thanks
Ramakanth

Inpection point results table- sample size- FIX-1

I am having some single reading result recording (sample size- FIX-1) in my in process inspection.
But I am unable to find the right tables where these informations are stored.
I checked in QASE, but no readings are available. In QAMR table it is showing mean value of all my in process readings only.
Which table will provide seperate readings which I entered during in in process inspection. Or inspn point wise readings table.
Thx in advance
Viny

Dear Jaison
Please search out from the following tables :--
Results Recording QAES Sample unit table
Results Recording QAKL Results table for value classes
Results Recording QAMR Characteristic results during inspection processing
Results Recording QAMV Characteristic specifications for inspection processing
Results Recording QASE Results table for the sample unit
Results Recording QASR Sample results for inspection characteristics
Results Recording QASV Sample specifications for inspection processing
Results Recording TQ12 Ind. external numbering for test units in results recording
Results Recording TQ12T Texts for the ind. for ext. numbering of units to be insp.
Results Recording TQ70 Control table for results recording
Results Recording TQ70C Function codes for navigation from the char.overview screen
Results Recording TQ70E Screen-based processing tables
Results Recording TQ70F Navigation during results recording
Results Recording TQ70S Characteristic overview screen for results recording
Results Recording TQ73 Origin of results data
Results Recording TQ73T Texts for origin of results data
Results Recording TQ74 Recording configuration
Results Recording TQ74T Recording configuration
Results Recording TQ76 Processing status of inspection characteristics
Results Recording TQ76T Texts for the processing status of insp. characteristics
Results Recording TQ77 Attributes for the Inspection Characteristic
Results Recording TQ77T Text Tables for Attributes
Results Recording TQ78 Status-dependent processing table for insp. characteristics
Results Recording TQ78T Texts for the status-specific proc. table for insp. char.
Results Recording

XPS Controller - How to write points/results of the Relative Move command

Hi,
I'm new to Newport XPS Controller and linear stages. I've just figured out how to communicate to the stage via XPS controller and managed to move the stage. I need help on how to get the points that the stage has moved. I guess I could use the gather function but got stuck halfway through. A screenshot of the block diagram and the VI is attached below.
Henry
Attachments:
test.png ‏156 KB
Test.vi ‏20 KB

Hey there,
I am going to make a couple assumptions here, please reply and let me know if they are wrong :)
I am going to assume the jsp is running on an app server that is separate from the content server and you need to execute the web services from there. I am also going to assume that you are familiar with importing and using java classes on your jsp.
You have several options in this case:
1. Generate the stub classes for the WSDL's yourself instead of using the SoapClient class (this can easily be done in eclipse)
2. Modify the SoapClient.java to be a more generic class instead of a command line argument based class and use your modified class to make the call and display the results.
3. Use the SoapClient class as is by executing a command line call in your jsp (using java.lang.Process)
Depending on your comfort level with java and jsp I think #2 would be easier but #1 is the more standard approach. #3 is not recommended but doable
Hope that helps,
Andy Weaver - Software Consultant
Fishbowl Solutions < http://www.fishbowlsolutions.com?WT.mc_id=amw >
Check out our Oracle Consulting Services Section.

Inspection point results on characteristics tab QA11

When you use multiple inspection points standard SAP shows the average of the results on the characteristics tab in transaction QA11. Is it possible to see all separate results instead of the average?

My client wants to view all the separate results when maken the ud. I think the best way to do this is to click on the Charac data button.
Edited by: Maarten_m4 on Jan 12, 2011 8:31 AM

Auto creation of time based inspection points against in process required

Hi
We want system to create/generate inspection points automatically when process order is released and inspection lot is created. Currently we have to create inspection point manually using either QE71 or QE11. Previously when scheduling was active in PP, inspection points had been creating automatically for the duration of process order. But now PP scheduling is not required and as a results inspection points are not being created automatically.
Please assist.
regards
Chris

SAP provides a FM, (QAPP_CUST_IP_CREATE), to be used as a template to create your own FM for automatically creating inspection points. There is documentation in the FM to explain it. You then assign this FM in configuration where you define the inspeciton point identifiers.
FF

RECORDING THE RESULT

Dears
i was created the production order for 10 qty and i need to record the result for each and every 10 qty seperatly
but there will be only one production order for 10 qty
my material was activated with inspection type 04 and inspection plan was also created
but i am not able to record result 10 1qty seperatly
pls tell me how we can achive this in details
Thanks in advace
Faisal

It can depend on the sampling procedure you selected. You also need to create new orders for testing.
Another option is to use inspection points and create a new inspeciton point for each item as you inspect them.
FF

Inspection Point table

Dear All,
we are in the process of automating the results recording process using a Z program. For the results recording i have used Inspection points. What i mainly want to do is from several characteristics, Initially record results for one inspection characteristic and later record results for a different inspection characteristic. In the STD SAP this allows to do. What i want to know is since i use the Inspection points, what are the tables that will be used?
Thanks and Regards,
DTD

Hi
Hope these details will help you
QALS Inspection lot record
QAPP Inspection point
TQ79 Table with inspection point/user field combinations
TQ79T Key words for inspeciton point user fields
QAMR Characteristic results during inspection processing
QAMV Characteristic specifications for inspection processing
Regards
Charith

Time event C019 integration with results recording

Hi ,
Posted this in the QM forum and got no response so reposting it here. I am asking for a discrete manufacturing scenario. Does any one know how to integrate CO19 time event confirmation with the results recording transaction. Usually on the mfg floor the mfg people will do in process inspection. They are used to more of a clock in clock out way of working. They clock into the operation, they do the manufacturing activities and then they do the inspection activities. Once both are done they clock out and the material moves to the next operation. I knoe we can tie in manufacturing confirmation (CO11N) transaction with the results recording for inspection points. But I am looking to tie in the CO19 time event transaction to do the clock in clock out and tie it with the inspection point results recording transaction. The operators on the floor do not want to go to mutliple transactions to record thier time on that operation. Do you know how that can be done and if its even possible ?
Also do we have to use inspection points or can we do it without inspection points ?.
Thanks

GS, Time events are always tied to a record group technically and this prohibits free/extended usage of the transaction compared to say CO11N.
Explore further on the details provided in the sap help site which states,
'You can only confirm quantities when you confirm processing time events.
You can only confirm activities that cannot be assigned to a particular record type group (Set-up,processing, teardown) by using the time event ‘Variable activity’. The confirmed value is assigned to corresponding value in the standard value key parameters'..

ISO C Binding with standard C libraries, and Fortran pointer functions

The ISO-C-Binding extension is mostly working in Sun Fortran, so I have been experimenting with auto-generated interfaces to C libraries, which I hope to develop in to a complete SWIG addition. Ideally, many of the standard C libraries should eventually be commonly available.
One of the problem I realized is that many C library entities are made available via macros. For example, even stdin and stdout are macros by default. The same issues came up when C++ tried to standardize access to C libraries, which resulted in an alternative library to access C functions: http://www.cplusplus.com/reference/clibrary/.
One example is the C 'errno', which is defined as a "modifiable l-value", and traditionally was an external int, but resolves to a function in modern multi-threaded environments. Variations in C libraries probably will require C wrapper functions, but entities like errno can be made to work more like C, if Fortran pointer function results can be handled directly like a normal reference. For example, errno could be accessed as follows:
Fortran source:
program test_errno
use ISO_C_Binding
implicit none
interface
function errno() bind(C,name="cerrno")
use ISO_C_Binding, only: C_int
implicit none
integer(C_int), pointer :: errno
end function errno
end interface
write (*,*) 'errno=',errno()
errno() = 10
write (*,*) 'errno=',errno()
end program test_errno
C source:
#include <errno.h>
int *cerrno(void) { return &errno; }
With the current Sun Fortran, this gives errors. I think that F2008 includes improved specifications involving pointer function results, but I have read through the F2008 draft enough to figure out the details. Ideally, a pointer function result should simply be identical to a temporary pointer variable, instead of lot of complicated specifications involving specific cases. For example, a pointer function returning a derived-type pointer should be able to access a member value like this:
lookup_data("name")%value = 10
where lookup_data is a function returning a pointer to a derived type, which has a member named value.
Does anyone know how F2008 is intended to handle function pointers? Is this something where the details are still incomplete? Is it possible that a complete generalization of function-pointer results is not possible?

The ISO-C-Binding extension is mostly working in Sun Fortran, so I have been experimenting with auto-generated interfaces to C libraries, which I hope to develop in to a complete SWIG addition. Ideally, many of the standard C libraries should eventually be commonly available.
One of the problem I realized is that many C library entities are made available via macros. For example, even stdin and stdout are macros by default. The same issues came up when C++ tried to standardize access to C libraries, which resulted in an alternative library to access C functions: http://www.cplusplus.com/reference/clibrary/.
One example is the C 'errno', which is defined as a "modifiable l-value", and traditionally was an external int, but resolves to a function in modern multi-threaded environments. Variations in C libraries probably will require C wrapper functions, but entities like errno can be made to work more like C, if Fortran pointer function results can be handled directly like a normal reference. For example, errno could be accessed as follows:
Fortran source:
program test_errno
use ISO_C_Binding
implicit none
interface
function errno() bind(C,name="cerrno")
use ISO_C_Binding, only: C_int
implicit none
integer(C_int), pointer :: errno
end function errno
end interface
write (*,*) 'errno=',errno()
errno() = 10
write (*,*) 'errno=',errno()
end program test_errno
C source:
#include <errno.h>
int *cerrno(void) { return &errno; }
With the current Sun Fortran, this gives errors. I think that F2008 includes improved specifications involving pointer function results, but I have read through the F2008 draft enough to figure out the details. Ideally, a pointer function result should simply be identical to a temporary pointer variable, instead of lot of complicated specifications involving specific cases. For example, a pointer function returning a derived-type pointer should be able to access a member value like this:
lookup_data("name")%value = 10
where lookup_data is a function returning a pointer to a derived type, which has a member named value.
Does anyone know how F2008 is intended to handle function pointers? Is this something where the details are still incomplete? Is it possible that a complete generalization of function-pointer results is not possible?

Add Tooltip to Data Point

Hi,
I was wondering is it possible to add a Tooltip containing text (not the (X,Y) values) to a datapoint. I'm using VS2010.

This example uses a structure to associate a text string with each data point.
Imports System.Windows.Forms.DataVisualization.Charting
Public Class Form2
Structure myData
Public y As Single
Public text As String
End Structure
Private MyDataList As New List(Of myData)
Private Sub Form2_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Dim d As myData
For i = 1 To 12
d.y = 5 * Math.Sin(i / 2)
d.text = "Text Data: " & i.ToString
MyDataList.Add(d)
Next
Label1.Text = "Select a Point"
'setup the chart
With Chart1.ChartAreas(0)
.AxisX.Title = "Time"
.AxisX.MajorGrid.LineColor = Color.LightBlue
.AxisX.Minimum = 0
.AxisX.Maximum = 14
.AxisX.Interval = 2
.AxisX.LabelStyle.IsEndLabelVisible = False
.AxisY.Title = "Value"
.AxisY.MajorGrid.LineColor = Color.LightGray
.AxisY.Minimum = -6
.AxisY.Maximum = 6
.AxisY.Interval = 2
.BackColor = Color.AntiqueWhite
.BackSecondaryColor = Color.White
.BackGradientStyle = GradientStyle.HorizontalCenter
.BorderColor = Color.Blue
.BorderDashStyle = ChartDashStyle.Solid
.BorderWidth = 1
.ShadowOffset = 2
End With
Chart1.Series.Clear()
Chart1.Series.Add("Monthy Data")
With Chart1.Series(0)
.ChartType = DataVisualization.Charting.SeriesChartType.Line
.BorderWidth = 2
.Color = Color.Blue
.MarkerStyle = DataVisualization.Charting.MarkerStyle.Circle
.MarkerSize = 8
.IsVisibleInLegend = False
For m = 1 To 12
.Points.AddXY(m, MyDataList(m - 1).y)
Next
End With
End Sub
Private Sub Chart1_MouseDown(sender As Object, e As MouseEventArgs) Handles Chart1.MouseDown
Dim result As HitTestResult = Chart1.HitTest(e.X, e.Y)
If result.ChartElementType = ChartElementType.DataPoint Then
Chart1.Series(0).Points(result.PointIndex).XValue.ToString()
Label1.Text = MyDataList(result.PointIndex).text
Else
If result.ChartElementType <> ChartElementType.Nothing Then
Dim elementType As String = result.ChartElementType.ToString()
Label1.Text = "Selected Element is: " & elementType
End If
End If
End Sub
Private Sub Chart1_MouseMove(sender As Object, e As MouseEventArgs) Handles Chart1.MouseMove
Dim result As HitTestResult = Chart1.HitTest(e.X, e.Y)
' If a Data Point or a Legend item is selected.
If result.ChartElementType = ChartElementType.DataPoint Or result.ChartElementType = ChartElementType.LegendItem Then
' Set cursor type
Me.Cursor = Cursors.Hand
Else
If result.ChartElementType <> ChartElementType.Nothing And result.ChartElementType <> ChartElementType.PlottingArea Then
' Set cursor type
Me.Cursor = Cursors.Hand
Else
' Set default cursor
Me.Cursor = Cursors.Default
End If
End If
End Sub
End Class

Mavericks & FileVault & logging out results in Mac mini shutting down?

Hello.
Did a clean install of Mavericks and set up FileVault on my primary SSD and every night, before I go home, I log out of the system (by restarting) and the machine restarts and lands on the login screen (and then I leave the office). Since I enabled FileVault, I find that when I come in the next morning, my Mac mini has shut down at some point (resulting in a failed network backups via one of my Retrospect servers as it can't find my mini on the network, since it's offline).
- The mini is on a UPS and nothing in the UPS logs show power issues resulting in a shutdown.
- There is no schedule (Preferences > Energy Saver > Schedule) shutting the machine down.
- I don't have any scripts or other set schedules that shut the machine down and nobody else has physical/remote access to the machine resulting in it shutting down.
I've checked the logs and I constantly see this when I restart the machine before leaving...
12/18/2013 5:29:50.378 PM loginwindow[84]: ERROR | -[ApplicationManager quitPrivateProcesses] | Private process did not quit
12/18/2013 5:29:50.418 PM sessionlogoutd[2850]: sessionlogoutd Launched
12/18/2013 5:29:50.438 PM sessionlogoutd[2850]: DEAD_PROCESS: 84 console
12/18/2013 5:29:50.514 PM com.apple.launchd[1]: (com.iospirit.candelair.sync) Throttling respawn: Will start in 10 seconds
12/18/2013 5:29:50.641 PM loginwindow[84]: ERROR | -[Application hardKill:] | Application hardKill returned -600
12/18/2013 5:29:50.642 PM loginwindow[84]: ERROR | -[Application hardKill:] | Application hardKill returned -600
12/18/2013 5:29:50.643 PM loginwindow[84]: ERROR | -[Application hardKill:] | Application hardKill returned -600
12/18/2013 5:29:50.000 PM kernel[0]: hfs: unmount initiated on Time Machine on device disk6
12/18/2013 5:29:51.034 PM shutdown[2854]: reboot by _timezone:
12/18/2013 5:29:51.000 PM kernel[0]: Kext loading now disabled.
12/18/2013 5:29:51.000 PM kernel[0]: Kext unloading now disabled.
12/18/2013 5:29:51.000 PM kernel[0]: Kext autounloading now disabled.
12/18/2013 5:29:51.000 PM kernel[0]: Kernel requests now disabled.
12/18/2013 5:29:51.034 PM shutdown[2854]: SHUTDOWN_TIME: 1387405791 33746
Then, nothing until the next morning, when I physically have to turn the machine back on...
12/19/2013 9:06:04.000 AM bootlog[0]: BOOT_TIME 1387461964 0
Anyone have an idea what would be causing this? Does enabling FileVault result in an eventual shutdown if it's left sitting at the login window for too long?
Thanks,
Kristin.

Hi BDAqua
Thanks for your response.
I looked into console for the unusual shutdown prior to my post and I found the following:
14/02/2014 18:23:28.521 powerd[16]: com.apple.message.domain: com.apple.sleep.failure
com.apple.message.signature: Platform Failure
com.apple.message.summarize: YES
Sender_Mach_UUID: 5255D529-353E-3C81-A31C-8B5064DBA765
14/02/2014 18:23:34.837 loginwindow[41]: com.apple.message.domain: com.apple.loginwindow.autologin
com.apple.message.servers_mounted: NO
com.apple.message.mcxmount: NO
com.apple.message.usermount: NO
com.apple.message.machinemount: NO
Sender_Mach_UUID: 743BD562-083A-33F0-8CC1-1EBBFE59CBD6
I also did a search in String Matching for 'shutdown' and got the following:
14/02/2014 18:22:45.483 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
14/02/2014 18:23:09.146 locationd[43]: locationd was started after an unclean shutdown
14/02/2014 18:23:28.000 kernel[0]: Previous Shutdown Cause: 0
I hope this is helpful.
Jonty

Bug: query results sometimes lose line formatting

Steps:
1. Run a query on "arraycollection adobe flex null pointer"
Result: the 2nd search result "Flex 3 - Using the HitData object" from http://livedocs.adobe.com/flex/3/html/charts_eventsandeffects_03.html has all the line-ends removed (see 1st screenshot). When I go to the URL, the code looks OK (see 2nd screenshot), so it seems likely that Blueprint is somehow mangling the file.

Thanks for you feedback! We have filed a bug to address code formatting problems. Stay tuned for the next release.
Mira Dontcheva
Research Scientist
Adobe Systems

BAPI Result recording

Hi, i really need an example call of the
"BAPI_INSPOPER_RECORDRESULTS"
because it always fails when I try to enter an inspection lot point result. The 4 "IMPORTING" parameters are straightforward but I have no clue which fields I have to set in the "SAMPLE_RESULTS" (type=BAPI2045D3) table.
System: SAP 4.6C.
Thanks alot.

Did you check the documentation for the BAPI ? It looks informative and from the documentation, I also get the feeling that SAMPLE_RESULTS should not be filled , but this is the table where you get your result from the BAPI.
Also check BAPI_INSPOPER_GETDETAIL. You should probably call this BAPI first to get the details for a particular inspection order and then call BAPI_INSPOPER_RECORDRESULTS
Let me know if that helped.
Regards,
Subramanian V.
Message was edited by: Subramanian Venkateswaran

Selecting an existing volume control point-hit and miss

Hi folks,
Learning GarageBand feature by feature and enjoying it at every step.
Minor annoyance with the following and hoping someone has a way to make it less so.
I added volume control points to a song track to lower the volume at certain areas. I wanted to modify the levels but for the life of me selecting the already existing points results in adding a new control point I can never hit the blue dot on target to select it.
Any key click available to ensure I select the control point I want to move and not create a new one?
Thanks in advance.

FrankMtl wrote:
Any key click available to ensure I select the control point I want to move and not create a new one?
i'm afraid not, the only advice is to set and click the mouse _very_ carefully, and perhaps zooming the screen to see the point and mouse tip better

Inspeciton point results

Similar Messages

Maybe you are looking for