Inspecting element on Safari 7 does not show Web Inspector

When I run "Inspect Element" on Safari 7, nothing happens.  I don't see the Web Inspector and the page appears to lag a little bit.  I am running Mavericks 10.9.2 and Safari 7.0.3.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Similar Messages

  • I have photoshop elements 9 and iphoto does not show it in my preferences edit window. How do I get it as an option in my preferences

    I have photoshop elements 9 and iphoto does not show it in my advaced preferences drop down, it used to be there, how do I get it back again?

    Hi, Yes you are correct in iPhoto Prefernces, Advanced tab editing I used to have iPhoto and "Use external editor.". It changed to iPhoto and iPhoto Library. I have einstaleed PSE 9 and downloaded the update.  There is still no lkink to external editor in the drop down box.  Have I done something wrong inadvertently or is there a clitch?  can you reinstal iPhoto.  I am new to Macs. Every thing came preinstalled.  it is the top of the range system with 16 Gb of rRAM, 2 Tb hard drive to top graphics card etc.  I used to be on Windows PC.  Have more than 27,000 photos on the system.  Much apprecite your reply and interest in this.

  • Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

    Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

    I answered my own question: There's a difference between "download' and "install." Hunt for "install" (1.5 hrs in my case) and line up your passwords, Adobe ID, etc, then install. Took 15 min. The right choice shows up in Applications. Now it's on to figuring out why photo selected for edit in iPhoto does not show up on screen in Elements.

  • It does not show web-french-canada anymore

    When I open Firefox, it does not show Web-French-canada anymore.

    <u>'''Step 1.'''</u> You can check if you have any of these from [http://www.google.com/search?q=%22Fun+Web+Products%22&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:es-ES:official&client=firefox-a "Fun Web Products"] installed:
    Control Panel > Add or Remove Programs: Ask.com Bar,My Search Bar,MyWay Speed Bar,My Web Search Bar,Fun Web Products Easy Installer
    See:
    http://www.safer-networking.com/removemywebsearch.php
    [http://www.pchell.com/support/mywebsearch.shtml PC Hell: My Web Search Removal Instructions]
    http://helpint.mywebsearch.com/intlinfo/help/toolhelp.jhtml#q3
    <u>'''Step 2.'''</u> You <u>'''may'''</u> need to change a preference to reset your default URL/location bar search provider:
    -Enter '''about:config''' in the address/URL bar and press the Enter key
    -If you see a warning, accept it (Promise that you will be careful)
    -Filter = keyword.url
    -Below the Filter, right-click on keyword.URL and choose "Reset"
    -Restart Firefox (File > Restart Firefox)
    See: http://kb.mozillazine.org/Keyword.url
    <u>'''Step 3.'''</u> You <u>'''may'''</u> need to reset your homepage. Firefox can open multiple home pages. Home pages are separated by the "|" symbol.
    See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  • File Save Dialog does not show web folders

    Hi.
    My system is SAP ECC 6.0. From custom abap program, I need to be able to navigate to a sharepoint folder and save a file to it. I call METHOD cl_gui_frontend_services=>file_save_dialog for this. I have already mapped/added the SharePoint site (ex. http://abc/xyz/) to My Network Places. However, when I run my program, the File Save Dialog does not show the web folders in the said sharepoint site. Any clue to what I'm missing here? In WiinExplorer, I have no issue navigating/accessing the web folders.
    Thanks in advance.

    project manager
    um, yeah.
    Should not need the project manager simply to see new files added to a directory in a Open/Save dialog window since last opening the app.
    I did a scan, a extended scan, opened all the little turn down arrows of the
    full path to the directory I knew there to be the new files and yes, Logic
    shows them there in the "Project manager".
    BUT Logic still does not show the files in the Open/Save dialog windows.
    This is strange because even simple app like TextEdit can show
    new files in it's Open/Save dialog function windows without the need of
    a project manager.
    I have to quit and re-launch each time to see any new files?

  • Image only viewable in Safari. Does not show in Firefox 3.0 (OS/Windows), IE7&8

    I used an index template .dwt and inserted a logo header image.
    Using Browser lab it renders in Safari but not in Firefox 3.0 for both OS/Windows, IE 7&8, and Chrome.
         Using FILE-->VIEW IN BROWSER, which is Safari it is fine.
              A friend used FIrefox and IE7 and the image did not show or same results as Browser Lab.
    Orginial code:   <div class="header"><img src="../pictures/logo_header.jpg  :  Safari good, other browsers did not show image
    2nd try: Code:  src="/~sanchezg/pictures/logo_header.jpg", This time Safari did not show header image either.
    Location:  www.unm.edu/~sanchezg
    From PROPERTIES--> SRC --> BROWSE FOR FILE
    URL:  ../pictures/logo_header_jpg
    Relative to: Document      : index.dwt
      Selecting 'Change default Link Relative To in the site definition:
         Default Images folder:  /User/xxxxx/Sites/GabeSanchezFIles/Pictures
         Links relative to:  Document is selected
            Web URL:  http//www.unm.edu/~sanchezg
    What are your thoughts?
    Thank you

    I'm troubled by these answers because they seem to further muddy the water.  Here's the important concept -
    All links in the TEMPLATE file should be one of three kinds -
    1.  Relative to the template file, e.g.,
    <a href="../ (meaning that you must go up one level from the template folder
    to reach the root of the site, hence all other files, since none of them
    should be in the templates folder)
    2.  Relative to the site root, e.g.,
    <a href="/ (meaning that one would begin looking for the linked file at the
    root of the site and follow the pathing from that point)
    3.  Absolute, e.g.,
    <a href="http:// (meaning that the link is to a page external to the site).
    Seems that none of the suggestions are putting you on that path first.

  • Firefox does not show web page graphics or icons, mostly blanks or boxes with type.

    With one of the recent updates, Firefox shows web pages without the clickable graphics, such as this page (Ask a New Question) where above the details box, there are only two vertical lines. I know there should be something in those spaces, cause when I click in them something happens - like a dialogue box pops up or a word gets inserted into this typing. This is consistent on all web pages. Major photos show, just not the little graphics. Icons or graphics that are visible sometimes are offset (ex: this page has an arrow in a green box over lapping the outline of the Search Firefox Help box). Other than that, this page has only two other graphics, it's all type. Thanks.

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong

  • Elements 11 organizer screen does not show tools

    How can I get the organizer screen to display the tools on the right and bottom?

    Not soo much pictures, only 12.000
    I try to select one of the thumbnails with a rightclick to update the thumbnail...nothing happens.
    Then i look in the help menu for the system info. Dont find the file Thumbs.
    in find another point :
    Aktueller Katalog:
    Katalogname: Mein Katalog
    Speicherort des Katalogs: C:\ProgramData\Adobe\Elements Organizer\Catalogs\Mein Katalog\
    Größe des Katalogs: 50,7 MB
    Größe des Katalog-Cache: 283,6 MB
    Maybe i can delete the katalog there? Im not sure it will help.
    Edit: I follow the way on my PC and find the thumb5.cache.
    But i also find another "Katalog" called Mein Katalog1". Its an older one. So strange...
    Message was edited by: um-photography

  • Will not show web page on windows high contrast

    Hi,
    Am running Windows 7 64bit
    my problem is as follows.
    I normally run Windows in high contrast mode and would prefer all web sites to be on the dark side.
    Occasionally I need to be able to see a web page as its designers intended it to be.
    So I want to have the text white and background black and then the ability to toggle between that and the web page's own colour scheme.
    Thought I'd found exactly what I needed in the add-on "Toggle Document Colors 1.0"
    Am presuming it toggles the status of the "Allow pages to choose their own colours..." tick box.
    This setting seems to get lost when FF closes. Even if I set the tick box myself and then close FF it is gone when I reopen FF.
    If the box is ticked and a page refreshed it still does not show web page colours ?
    Without any addons at all after a reset and only using the colours dialog I cannot get it to behave.
    If you start in Windows white mode (normal) things are better even after FF close. Change to Windows black mode (high contrast) things start off ok then after you close FF it will not work
    If there is a solution I would love to know it.
    Will settle for a workaround.
    Considered using old version of FF, but this is not really a good idea.
    Really don't want to go back to IE
    in hope ... Bob

    iTunes does not yet support Windows 8, so there may not be a fix until such time as Apple releases a version of iTunes that does support 8. You can search this forum for "windows 8", though, and perhaps you'll find a suggestion in one of the other threads on the issue.
    Regards.

  • When using the google translate js api to dynamically translate a webpage the chosen option in a select element does not show up. This happens to me only in FF (using v4)

    I am asking you this because I did not find this problem in any of the other browsers I have (chrome, opera, ie, safari).
    I uploaded a simple html file to show this problem here: http://rvyu.com/mKLG
    Notice that if you don’t change the language you have no problem changing the value in the select element (the original one with 3 options, not the one generated by google translate) but if you do when you switch values the selected one does not show up.

    Ok thank you so much, for your timely response.
    RESPONSES:
    1)   When I set up my iMac, I did not transfer any data directly from my windows PC.  I simply used the same iTunes login and account.  I have access to all of the files via the "Purchased" section of the iTunes store.  If I click "Download Previous Purchases"  text, I can download ALL of the purchases I have ever made.
    2)   I have the Apple TV 2, so good news, question answered.  I thought maybe it was the Apple TV 1, but it is the Black model, so bam.  Good response for you.  Well the whole damned reply is an awesome response, just pointing out that one piece of awesome.  I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
    QUESTIONS:
    3)   So can my iMac not stream the data directly from itunes, without download?  Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
    SERIOUSLY.... THANK YOU... 
    I work in the computer support section for the Military.  The only problem is we use Windows , lol.  Well that and i've been gone for nearly 6 months on recover.  I go back next month though I hope.  But working in that field gives me the abilty to judge responses that run inside the same vein.  Your response was so awesome that I half thought I might have written it myself. 

  • Why when using Adobe Bridge,  I apply a star rating,  the rating does not show up in Photoshop Elements? [tags]

    Why when using Adobe Bridge,  I apply a star rating,   the rating does not show up in Photoshop Elements.  I use Elements as my organizer and Bridge to view as it is much more user friendly.  Anyone any solutions??

    Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

  • Photo does not show up in Adobe Elements

    I have a MacBook and have iphoto set up to open the edit with Adobe Photoshop Elements and not with iphot oediting tool. I had version 8 of APE and upgraded to APE 9 - now the photo does not show up in the Adobe window when I try to edit. How do I fix this ?

    Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

  • Help- Elements 9 "Does not show Advanced dialog" for downloading

    Hi, I'm fairly new to elements and have gone through my "Dummies Book" and yesterday received my Elements 9 book by Scott Kelby and Matt Kloskowski.  My problem is when I'm attempting to download 5 new pictures from a card that still has 700 on it - The download organizer does NOT show the "Advanced Dialog button" on the bottom-left corner of the dialog box which as Kelby and Kloskowski indicate, would allow me to select only the 5 new pictures that I am attempting to download.
    Can anyone assist?  Do you have any recommendations?  It is clearly described (even with pictures) in the Scott Kelby book; however, my screen does not list the advanced dialog button.
    Thank you-Thank you-Thank you!

    Bob, It just seems that using windows to import into a file and then
    importing from Files and Folders is a workaround to not being able to bring
    up the Advanced Dialog Button.  I do appreciate and thank you for this
    suggestion!
    Overall, I'm disappointed in the Photoshop Elements 9 program.  It appears
    from reading this forum, that there are many similar difficulties with the
    Advanced Dialog Button and other similar programming elements that have
    perpetuated from Elements 8.
    Again, thank you for your time and interest and support in this forum.
    Without contributors like yourself, many "newbies" would be forever lost.
    One last question, Since I've downloaded by original batch of 700 photos
    three times now, what would be the easiest way of cleaning up my mess??????
    Thank you.   Hoping to be able to use this program by Christmas!!!!!

  • TS1398 On my ipod, it shows that it's connected to a wifi network but when i try to open safari, it does not work

    On the wifi settings it shows that my ipod is connected to a network, but when I try to open safari it does not open it, because it says its not connected to wifi

    You may not really be connected to your WiFi network.
    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • Safari does not show url address line. google is taking up all the space...

    safari does not show url address line anynore. google is taking up most of the space on the safari page

    Hover the cursor over that line until it becomes a big plus sign with arrows on the left and right. Click and drag the cursor so that the rest of the address line is the way you want it.
    (66963)

Maybe you are looking for