Inspection characteristics cancelled for inspection

Hi Experts,
Whern does an Inspection Characteristic of an Inspectin Lot can be cancelled in inspections?
Thanks...

Hi,
I think u must be geeting red light in qa33 in monitor column.
According Sap It has following meaning
There are 5 possible settings for the traffic light:
1)According to start dateIf the start date has passed, the traffic light is red.
If the start date corresponds to the current date, the traffic light is yellow.
If the start date has not yet been reached, the traffic light is green.
2)According to end date
If the end date has passed, the traffic light is red.
If the end date corresponds to the current date, the traffic light isyellow.
If the end has not yet been reached, the traffic light is green.
3)According to the degree of processing for the inspection lot
If the usage decision is due to be made (that means, the end date has been reached and no usage decision has been made), the traffic light is red.
If the usage decision is not due to be made, the traffic light is yellow.
If the usage decision has already been made, the traffic light is green
4)According to open characteristicsIf there are open short-term characteristics, the traffic light is red
If there are only long-term characteristics, the traffic light is yellow
5)If there are no open characteristics, the traffic light is green
According to open quantities
If quantities are open, the traffic light is red
If there are no quantities open, the traffic light is green
Regards
Amol

Similar Messages

Background job got cancelled for the user ----- Isolation and resolution

Hi Experts,
One background job got cancelled for the user I have the Jobname and User...
Able to view the log information in SM37.
I am not sure what is the next step to do and how to resolve this issue.
Could any one please provide me the step by step Isolating the issue and resolving it.
That would be really greatfull.
Thank you in advance.
Regards,
Prem.

Hi,
What the error it was stating in that SM37 job log?
Pls post that error log, not completely just mention the error here we'll try to help you.
rgds,

Assigning of characteristics value for a batch

Hi All,
Please help regarding the assigning of characteristics value for a batch in transaction code MSC2N or MSC2 in the classification tab.
If Function modules or BAPI is available pls advise the inputs to be provided for the function modules.
Here is one function module which i searched, but if i run this function module, i am not able to commit my characteristics value.
The function module is CIF_BATCHCHAR_MAP.
For the above function module the inputs which i have given are...
Material number
Batch
Plant
Class type
Class Number
Characteristics name
Characteristics value
Expecting your earliest reply.
Thanks,
G.C.Arravind Kumar Vikram

Try the code below
*.1 create key
it_objects-key_field = 'MATNR'.
it_objects-value_int = matnr.
APPEND it_objects.
it_objects-key_field = 'CHARG'.
it_objects-value_int = charge.
APPEND it_objects.
CLEAR l_objectkey.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
    EXPORTING
      objecttable    = 'MCH1'
    IMPORTING
      objectkey_conc = l_objectkey
    TABLES
      objectkeytable = it_objects
      return         = it_return2.
2 fill it_num it_char it_curr with values
3 change characteristics
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
    EXPORTING
      objectkey          = l_objectkey
      objecttable        = 'MCH1'
      classnum           = it_class-classnum
      classtype          = '023'
    TABLES
      allocvaluesnumnew = it_num
      allocvaluescharnew = it_char
      allocvaluescurrnew = it_curr
      return             = it_return.

Usage decision - characteristics relavent for usage decision

Hi friends,
In usage decision screen, either all characteristics are shown or only characteristics relavent for usage decision is shown.
How do we make a charactertics as usage decision relavent, so that it is shown in usage decision screen by default.
Regards
CSN.

hi
either all characteristics are shown or only characteristics relavent for usage decision is shown
Char relevent to UD are except follwing.
1.Char is skip -->you apply DMR for Char or at lot level in task list header or at char level.
2.Required char is not ticked in the Control indicator of cha.that means you have selected Optional char.
3.You have not selected task list indicator in QM view.
These are only possibilities that all char will not appear in the UD screen.
Regards
Sujit

No characteristics found for configuration valuation for material YYTESMAT-

Hi
in tcode PDN I am createing a filter and asing material yytesmat to it
when i try to assing characteristic to it i am getting error
'No characteristics found for configuration valuation for material YYTESMAT'
pls help how to solve this error
FYI :I have enter characteristic name in classifcation tab while creating material
pls reply psl reply
Edited by: pankesh betala on Jun 2, 2010 10:34 AM
Edited by: pankesh betala on Jun 3, 2010 8:04 AM

Hi,
As you said there is no data in material master for this material. this may be the reason for this. Try loading this material master and perform attribute change run. This should solve the issue.
thanks,
JituK

Link between Class and characteristics created for that class

Hi All,
Is there any table that I can look at to find a link between class and the characteristics created for that class. For all the list of characteristics created I am refereing to CABN table but my requirement is to find the logic to see all the characteristics created for a class. Can anyone suggest me the right table to look at?
Regards,
Shane

Hi,
I would like to thank you for your quick response. So based on your thoughts, here is the process i followed to find the characteristics for a existing class, took the Internal class number and used the KSML table to find all the Characteristics created for that class.
To find the list of values assigned to that characteristics, used the AUSP table for that characteristics internal number.
Thank you again for your inputs
Shane.

All Part1 entries have been cancelled for excise invoice 943 2010

Dear Experts,
User made mistake in MIGO,but we have already captured excise for the material.The PO is created for Project stock
internal order(300425).User canceled MIGO and try to Post excise invoice,but system is giving the message all part1 entries
have been canceled.But,when i checked J_1iPART1 .i can able to find the part1 entries against the material document.please guide me.
Regards,
Varun

Hi,
It seems that GR /Part I is cancelled, & for the same your are trying to capture/post the excise invoice using J1IEX .
You need to GR with Excise details then only you can able to Post the Excise invoice.
Check the Invoice status in J1IEX display against vendor invoice no.
Rg

Time Machine Backup cancels for no "apparent" reason

Hello,
I am using Time machine with Snow Leopard and an external WD My Book 1TB HD - I am using the very latest WD firmware/software (made for Snow Leopard) and was making successful automatic backups for several days until recently when the backup started canceling for no apparent reason. I installed the Time Machine buddy widget and found this message:
Starting standard backup
Backing up to: /Volumes/GPL III BACKUP/Backups.backupdb
No pre-backup thinning needed: 1.80 GB requested (including padding), 894.51 GB available
Error: Flushing index to disk returned an error: 0
Copied 7393 files (997.6 MB) from volume GPL III HD.
Backup canceled.
I tried a manual backup and the same message. I waited until the next automatic backups and got the same message - each and every time.
I have searched the Time Machine section and nothing specifically addresses the error message.
Any ideas on what is wrong and how to resolve it? I thought about erasing the HD and starting over but that seems draconian.
Thanks!

GPL3 wrote:
I checked the set-up and it looks fine except the Tips note that a GUID partition is preferred for some purposes (whatever that means) on Intel Macs (such as mine) rather than the Apple Partition Map which is what the WD HD has - although it does note that either will work. Could this be the problem?
No, I guess I need to try to reword that somehow. Was trying to keep it short. It only matters, under some circumstances, on a drive with OSX installed on it.
Jan 30 08:57:02 Peter-Lambs-iMac virusbarriers[54]: Child scanner 211 exited with exit code: 1
Jan 30 08:57:02 Peter-Lambs-iMac virusbarriers[54]: Child scanner 270 exited with exit code: 1
Jan 30 08:57:10 Peter-Lambs-iMac mdworker32[263]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
mdworker is used by the mds process (MetaData server); Spotlight is it's main client, but Time Machine also uses it, as do some anti-virus apps. Hard to tell just what sort of problem that was.
Jan 30 08:57:20 Peter-Lambs-iMac mds[34]: (/Volumes/GPL III BACKUP/.Spotlight-V100/Store-V1/Stores/291AAEE8-0631-48A0-AAC8-679C66732217)(Er ror) IndexSDB in dbflushdatastore:/Volumes/GPL III BACKUP/.Spotlight-V100/Store-V1/Stores/291AAEE8-0631-48A0-AAC8-679C66732217/sto re.db : dbsyncdatastore: !WARNING! prior write-errors invalidate sync.
Jan 30 08:57:20 Peter-Lambs-iMac mds[34]: (/Volumes/GPL III BACKUP/.Spotlight-V100/Store-V1/Stores/291AAEE8-0631-48A0-AAC8-679C66732217)(Er ror) IndexCI in _ContentIndexSyncIndexBulk:preSync error:22 12
Jan 30 08:57:20 Peter-Lambs-iMac mds[34]: (/Volumes/GPL III BACKUP/.Spotlight-V100/Store-V1/Stores/291AAEE8-0631-48A0-AAC8-679C66732217)(Er ror) IndexSDB in dbflushdatastore:/Volumes/GPL III BACKUP/.Spotlight-V100/Store-V1/Stores/291AAEE8-0631-48A0-AAC8-679C66732217/sto re.db : dbsyncdatastore: !WARNING! prior write-errors invalidate sync.
Jan 30 08:57:20 Peter-Lambs-iMac mds[34]: (/Volumes/GPL III BACKUP/.Spotlight-V100/Store-V1/Stores/291AAEE8-0631-48A0-AAC8-679C66732217)(Er ror) IndexCI in _ContentIndexSyncIndexBulk:preSync error:22 0
These are all mds having problems in the Spotlight index on your TM drive.
Could my anti-virus SW be an issue (I am using VirusBarrier X6)?
Quite possibly. Exclude your TM disk from it, or turn it off.
Also exclude your TM disk from Spotlight indexing, at least temporarily, via SYstem Preferences > Spotlight > Privacy.
That will likely fix the backup problem.
You really don't need much, if any, anti-virus on a Mac; and many anti-virus products are actually worse than a virus! For more detail, see this post by Klaus1: http://discussions.apple.com/thread.jspa?messageID=10942146&#10942146 or: http://discussions.apple.com/thread.jspa?threadID=2307964
If you're running Windoze, of course, the Windoze side needs all the usual anti- stuff of a PC.

Production Order cancellation for wrong confirmation

Hello Guru,
We have wrong confirmation on order 100000152. When user confirms one activity with two different units of measure
(in this case its MIN and KG) SAP doesn't allow to cancel the wrong confirmation we encounter error when trying to
cancel the wrong confirmation (confirmed activity must not be smaller than 0 - check entry)
Please tell us what exactly is wrong in the system that the cancellation isn't allowed. How could we don made the
cancellation for this wrong confirmation.
thanks

Hello Vivek,
Sorry yesterday, i already left out office that why i did not have to reply you about this, i personally do the production order, I do firt confirmed operation 0010 upon finished confirming this operation i confimred next the operation 0020, so that is the sequence we confirmed the order. And all the confirmation that is been done to operation 0010, we do not want to do cancelation all of this, we just made mistake when doing final confirmation on operation 0020, we have confusion on unit of measure for LIMITING WASTE, we really want ti cancel this mistake but doing CO13 for this we encounter the error, please provide us soltuion for this, we only aim to cancel the mistake we did for operation 0020 confirmation. Hope you can help us, even other guys out there.
I have also question about Patel give, (think the quantity confirmed by user for wrong operation is less than 0. Please check the quantity i.e. activity which is confirmed in MIN instead of KG. System might have converted the MIN to KG & it will be less than 0) he has some point, it maybe SAP has do convertion from MIN to KG since LIMITING WASTE in our process has unit of MIN, since we have put KG instead of the right unit, it does make convertion that cause less than 0 value, please let us know how to cancel this and made the proper resolution.
Thanks

J1iex - All part 1 entries have been cancelled for excise invoice

Dear Gurus,
Please help me to resolve the issue, I have captured part 1 excise invoice at the time of MIGO, internal excise invoice no generated. With the reference of internal excise invoice, I am trying to post part2 excise invoice through j1iex. At that time am getting the below error.
All part 1 entries have been cancelled for excise invoice 80000 2011
Message no. 4F113
In j_1ipart1 am seeing two line items for single material document which has a goods movement direction with R & I. Would this is being cause any issue. Please advise.
Thanks & Regards,
mohdsams.

Because of account assignment, system consumes the goods automatically. Hence the issue is resolved.

Cancellation for 201 movement type

Hi,
We cosumed material for cost center with 201 movement type on 25.12.2009. Now we must send back to our vendor. But there is no stock in storage location. aA far as I know in this case there are two choıces:
One of them is making cancelletion for material document. But the document date and posting date are not possible periods. Can we do cancellation for current date? Is it wrong for CO? Or what is the effect for CO?
Second of them is making goods receips for 711 movement type.
Which of them are more sutible for CO / this case? or what we can do? Are there another solutions in this case?
Thanks.

hi
>One of them is making cancelletion for material document. But the document date and posting date are not possible periods. >can we do cancellation for current date? Is it wrong for CO? Or what is the effect for CO?
in this case u can have two options
open the previous period with MMPI and do the cancellation (search on net for MMPI),but in this case u have to discuss with ur CO and FI guys for the impact of reversal in past period
also if the closings havebeen carried out there will be the balance of this stock
another option is that use movement type 202 directly u will get back stock in current period

All Part I entries have been canceled for excise invoice 1639 201

dear gurus
here the senerio:
excise material PO created and migo done through 103(gate entry),105(store entry)
While doing against store entry (105 mvt type) excise part1 captures
and part 2 captured in j1iex through the number generate at 105(store entry)
and posted in j1iex through internal doc number ( which generates while capturing:above step).
problem :
need to cancel the GRN.and the excise too.
grn is cancelled along with that part 1 gets cancelled.and part 2 be get cancelled while posting the
doc number (grn number 105 mvt ) in j1iex.
while posting it displays :
All Part 1 entries have been canceled for excise invoice 1639 201
plz suggest
Regards
bhanu
Edited by: Bhanu Y on Jul 12, 2011 2:28 PM

Mr,laxman
here the problem occuring
when the grn was cancelled and while canceling the part 2 problem arises.
here we will cancel grn and the internal documnet number to be posted in after grn cancelled
suggest here
Edited by: Bhanu Y on Jul 12, 2011 4:57 PM

Order cancelled for "unable to verify your information"

I am a elite plus member since 2012 (or could be earlier). Starting last month two of my BBY.com orders (Order placed on 5/29/2015 and 6/3/2015) were cancelled for the same reason "we were unable to verify your information", although my address and payment info were correct. After my order was rejected, I visited local BBY store. I had no problem to charge the same items to the same BBY Master card that I used for online order. I called BBY customer service asking what was going on. The rep told me he did not see any information on his computer about what information cannot be verified. He offered to escalation my case. Three weeks later, on 6/29/2015, I received a email from BBY Verification Group telling me: "Thank you for your order. We apologize for any inconvenience the cancellation may have caused. Unfortunately, we will be unable to process your orders on Bestbuy.com. Please visit a Best Buy location in the future." What is happening here on Bestbuy.com? Why Bestbuy.com refused to do business with elite plus member? I search in the web and found out I am not the only one has this problem. I have no problem to visit local BBY store but I prefer to place order online for it can save my time and gas. Also, sometimes I receive reward coupon from Bestbuy.com which can only be used in online order. Can a customer service specialist here can look into the issue? Thanks.

Hello susumu,
As a loyal customer to Best Buy, I can imagine the frustration you may have experienced through your recent BestBuy.com order cancellations. We certainly don’t wish to take away the convenience of shopping online for any of our customers. I’m sorry if we have troubled you in any way by having you visit the store for your recent purchases.
Orders can be cancelled for a variety of reasons, and occasionally this is due to us being unable to verify a piece of your billing or shipping information, as you have already been informed. It sounds as though this was already looked into by one of our support teams, but I will do my best to try to provide you with any additional clarity I discover with the help of those support teams.
We have received your private message as well, and I will likely be providing you with any additional information via private message; be sure to keep an eye on your private message inbox for my communication.
Kindest regards,

My account got canceled for no reason, and can't get to support...

My account got canceled for no reason, and can't get to support... Called 800-422-3623, was told they will call back in 1 hr 15 min, got the call and then was put on hold for another 18 min. Can't get help anywhere!!!
BTW, the account was canceled because adobe messed up the billing system early October, and decided to charge me FIFTY+ times in one day. Screwed up my bank account at BofA too - alert everywhere and all my other transactions were blocked. Adobe promised me that it's been fixed and gave me 6 months free. Now I got the account canceled and can't get a hold of them. This is unacceptable.
Jeff

I hae been trying going through all the steps to do so, but at the end, I can't get the purchase.

How do I get in contact with apple print services support Australia when my Print Order (book) keeps being cancelled (for no known reason)

How do I get in contact with apple print services support Australia when my Print Order (book) keeps being cancelled (for no known reason)

Portables that will not Power on.
Try another power outlet.
http://support.apple.com/kb/TS1365
Go step by step.
Note: Steps 5 and 6
Best.

Inspection characteristics cancelled for inspection

Similar Messages

Maybe you are looking for