Inspection Charateristic

My client needs Dependent Characteristics maintained during Inspection Plan (QP01) should be specific to either sales order & line item specific or it should be specific to ship to party
Currently we are able to define dependent characteristics customer (sold to party) specific which is not sufficient for client business processes
Can we acheive any one of this
Thanks in advance
Thanks
S. Sastry

Hi Shymal,
The system response :
Diagnosis
In batch SHA Material TO2429 Plant MY11 the specification data for characteristic 0014 from certificate profile TEST OCT Certificate type QATR Version 000001 was not found (master record: Plant MY11 Master inspection characteristic 500000).
Please advice..
Regards,
Vivek

Similar Messages

Class charateristic assigned to master inspection charateristic

Hi Experts,
I am working on a scenario as described below.
1. Create a chrateristic for pressure mesurement
2. Assign it to class
3. Create two types Master inspection chrateristic
using class chrateristic & without class charateristic
4. Use both the MIC in Task list operation
5.Assign ispection point in task list , in my case Fun location
6. Create inpection order as use this task list in it
7. inspection lot is getting created
8. While doing the Result recording the operation with MIC having class charateristic as ref is not coming
Can you please look in to it.
Regards
Amar

Hi Amar,
Can you pls check :
1. You have mention proper control key in your operations?
2. You have maintained sampling procedures in task list.
3. Also check whether your MIC is in released state.
I hope you have done correctly for the above Q's, then,
4. Check whehter you have not mentioned your both MIC to the same operation. Make two operations in task list and to each operations assign MIC.
Actually there is not much difference if you take ref or not. Only the parameters in class char will transfer while creating MIC (like lower spe limit upper sp limit ) but afterwards both are same as far as tasklist is concerned.
Regards,
Rajesh

Re: Inspection charateristic not appearing in the Certificate

Hi All,
I am not able to display an inspection characteristic in a certificate. While trying QC21 System is prompting message :The specifications for characteristic 0014 were not found in batch TEST Material TO2429 Plant MY11"
Please advice what to do top avoid this situation .
Regards,
Vivek

Hi Shymal,
The system response :
Diagnosis
In batch SHA Material TO2429 Plant MY11 the specification data for characteristic 0014 from certificate profile TEST OCT Certificate type QATR Version 000001 was not found (master record: Plant MY11 Master inspection characteristic 500000).
Please advice..
Regards,
Vivek

Re: Inspection Spec & Measured Results in Quality Certificate

Hi All,
I am facing an issue. I have scenario where I have to display some inspection characteristics on an outgoing quality certificate. Every thing is going Ok except for one inspection charateristic the Spec & the Measured values appearing on the certificate are not the one which they should be.I have tried a lot to investigate from where these values are fetched from .
Please provide some advice.
Regards,
Vivek

Dear Vivek,
I want to ask that is the report coming thru a development or you are using Standard SAP report by creating profiles??
If you are having a developed report thru your ABAP Teap, then simply it is a problem relating to wrong picking of data. Just ask to your ABAP personnel to check it.
And if it is a Standard SAP report then you have to check your settings & options as advised above.
Please give me the feedback about your findings.
Regards.

Chaneg log for QM results recorded

Guys,
Is there a way to track/view the changes to the results that are recorded for an Master Inspection Charateristic?
Thanks

Hi Ameya,
In creation of Master Inspection Charateristic,please check the control key setting.
In that miscellaneous, "RR change Document" check box to be flagged.
Then u have to assign the MIC to some Plan.
When Inspection lot is created using this plan, u can change the value during result recording.
All changes with their change log can be captured.
Raghu Sharma.

Multiple Inspection lots

Hi All -
Client does multiple goods receipts for a process order and the requirement is to create multiple inspection lots one at order level and other at each goods receipt level.
Is there any way to generate inspection lot at order level and for every goods receipt for the same process order ?
Please advice..
S

Only if you are using DMR's at the characteristic level to create skip characteristics.
In that case, you put on all the characteristics that need to be tested over the life of the order. Then the DMR makes characteristics optional or required as you prcoess the inspection lots.
The problem usually lies in how to reset all characteristics to the initial level. Characteristics can also get out of sync due to failures. A failed charateristic usually causes the DMR to make the characteristic required on the next inspection. Then it might be "off schedule" with regards to other or similar characteristics. This can be somewhat mitigated by using dependent characteristics so a group of characteristics follow the same DMR.
It works best when you have a very rigid receipt process. I.e. you know for a given material, that you'll do X number of receipts over the life of the order and all the receipts are of the same size.
FF

Follow-up action : please help - Inspection Lot related

Hi,
I am having the following trouble:
Through MB02, a printout is generated to the local printer (LOCL).
However, through QA11, when we save, we have a custom follow-up action attached that pops-up a
dialog screen.
The follow up action is triggered when a usage decision is changed for the inspection lot.
The follow-up action (configured in IMG) calls a Function Module and a screen, which in turn populates
a value into a custom DB table (based on the buttons, on the screen, sending either to LOCL or to a
zebra printer).
Now, what has to happen is that after inserting the value into a custom table, it should also open a sapscript and output.
The Sapscript and print program are there, with the print program being created 3-4 years ago by someone
else. However, even though we have code in the print program to update nast, in turn creating a message
for output (1st the custom DB table is checked to see if the values match, MATNRCHARG), It does not update
NAST. When we go through MB02, it does, but this should happen automatically after selecting one of the radio
buttons on the original pop-up & selecting print.
Please help. I don't know what to do and can't enable a debugger from the pop-up and if going though QA11,
I can't get it to stop inside the print program (only inside the custom FM).
Cheers,
John

hi
kindly check whether this FM will work for you QFOA_OBJECT_STATUS_SET
regards
thyagarajan

A/P Credit memo after GRIN Quality Inspection

Hi all,
We have to implement GRIN Quality Check module for one implementation. What we have done in the add on that for one GRIN, we go to Quality Check Program where item wise we enter the Accepted Quantity and Rejected Quantity . Then for all the Rejected Quantity we move the items from Raw Material W/Hs (GRIN W/Hs) to Rejection W/Hs and then create the invoice for complete GRIN Quantity for all the items . We have thought to return back the rejected items using A/P Credit memo which will both nullify the Invoice affect as well as Stock Affect . But there is a problem that we are encountering during A/P Credit memo :
When we perform Copy From from A/P Invoice to A/P Credit Memo , all the details form A/P Invoice are copied don to A/P Credit memo , but we want to return the goods not from RM WHs but from the Rejection WHs as we had already moved the Rejected Items stock to Rejection WHs ,when we change the code of Warehouse from RM WHs to Rejection WHs , it removed the tax code from Tax Code columns for that row and later does not even allow to edit the Tax Code for that row without which we are not able to save the A/P Credit memo.
please suggest the best way of implementing the complete scenario so that we could both be able to maintaining the separate stock of Rejected Items, Return it back after creating the complete Invoice . We also wanted to create the complete invoice after GRIN irrespective of the no. of items rejected.
Thanks and Regards,
Pooja Singh.

Hi,
Might be I have elaborated too much thats why I have not received any solution so far.
Actually I just want to confirm one thing first, that we are working for GRIN Inspection as follows :
1. GRIN
2. Inspection of all the items in a particular GRIN
3.Stock Transfer of Rejected Items to Rejection Locations
4.Now we want to create Complete Invoice that is invoice for Complete Quantity irrespective of Rejected Qty.
5.Now Returning back the Rejected Qty of items from Rejection Whs and Credit note for Vendor to reduce the due balance.
But when I try to create A/P Credit memo from AP invoice I want to change the WhsCode from RM Whs to Rehection Whs which if done , Tax code disaapears and disables.
What should be done.
Thanks and Regards,
Pooja Singh.

Error while uploading Inspection plan

Dear Friends,
I am creating inspection plans using BDC. The MIChas 2 versions. When i am using version 1, the inspection plan is created. Whereas when i am using MIC version 2 i am getting error "error occured while checking type group".Kindly let me know how do i resolve this.
Regards
Vivek

Hi,
Thanks for the reply. when i am trying to create a inspection plan in other plant, we have 4-5 sampling procesures to select from. But for this perticular plant where we are having problem, its showing only one. How do i get more options?How do i extend a sampling procedure to a new plant.
Vivek
Edited by: vivek mankad on Feb 23, 2010 7:57 AM

Error while creating Inspection plan

Hi,
While creating inspection plan in QP01, system is showing error "Material type ZROH is not defined for task list type Q''
Please help me to solve the error.
Thanks
Prasant

Hi,
This is due to the configuration error,
Just use T.Code OP50
Create an entry for task list type "Q" with material type "ZROH" and save,
Then try creating a Quality Inspection Plan, it will work
Regards
Merwyn

Creation of inspection lot 04 depending on production version

Hi Experts,
could you tell me if it is possible to create a Good Receipt inspection (lot origin 04) depending on the production version used ?
My material has 2 production versions:
0001 - production with process order
0002 - production with repetitve manufacturing
When I do a GR on process order, I do not want to create an inspection lot 04.
When I do a GR on product cost collector, I want to create an inspection lot 04.
As I have entered inspection types in material master data, I do not know how to do the distinction ?
Thanks in advance for your help
Best regards
Amaury

Hi
Check user exit
QBCK0003 |Extended QM check for goods receipt
Regards
Sujit

Cannot Record Material Inspection Results as per wiki use case * SOLVED *

=== EDIT ===
Playing around, I solved my issue.
I did not realize that I needed to set both flags
CloseIndicatorSpecified = true;
CloseIndicator = false;
Adding that fixed it; I suspect I cannot set them to null even if the WSDL allows it.
Michel.
=== ORIGINAL POST ===
Hi,
I have a project to integrate SAP and our LIMS using the SAP web services with the Material Inspection business object.
In the Wiki, there are a few [use cases|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ESpackages/IntegrationofQualityManagementSystems] on the subject.
Following that, I successfully retrieve all the required data using the following web services:
[Find Material Inspection Basic Data by Elements|https://wiki.sdn.sap.com/wiki/display/ESpackages/FindMaterialInspectionBasicDatabyElements]
[Find Material Inspection Subset Operation by Elements|https://wiki.sdn.sap.com/wiki/display/ESpackages/FindMaterialInspectionSubsetOperationbyElements]
[Find Subset Operation Inspection Activity Basic Data by Elements|https://wiki.sdn.sap.com/wiki/display/ESpackages/FindSubsetOperationInspectionActivityBasicDatabyElements]
[Read Subset Operation Inspection Activity|https://wiki.sdn.sap.com/wiki/display/ESpackages/ReadSubsetOperationInspectionActivity]
From there, I want to record results. According to the Wiki , I should use
[Record Subset Operation Inspection Activity Result|https://wiki.sdn.sap.com/wiki/display/ESpackages/RecordSubsetOperationInspectionActivity+Result]
I tried directly through the [WS Navigator|http://sr.esworkplace.sap.com/webdynpro/dispatcher/sap.com/tcesiespwsnavui/WSNavigator] to test web services. Whenever go through that tho, I get the following error:
Conversion Error: Invalid Input Format (701 SFB)
Obviously, I get the exact same error using c# (at least I'm consistent!)
Below is the code (some is truncated because it is too long but I think you can get the idea).
The question: Can anyone help me understand why I am getting that error? Maybe there is one or more property I don't understand... It would be practical if the actual failing property was identified in the LogItem, but it is not.
Some things I tried (to no avail):
1. Tried all sort of combination for actionCode
2. Removed actionCode and set actionCodeSpecified = false
3. Removed the Measure property
4. Removed the Text property
5. Removed the ChangeStateID
Thanks in advance!
Michel
...RequestMessage_sync messageIn = new ...RequestMessage_sync();
messageIn.MaterialInspection = new u2026RequestMessage_syncMaterialInspection();
messageIn.MaterialInspection.ID = new MaterialInspectionID();
messageIn.MaterialInspection.ID.Value = "3265";
messageIn.MaterialInspection.ChangeStateID = "1";
messageIn.MaterialInspection.Subset = new u2026RequestMessage_syncMaterialInspectionSubset();
messageIn.MaterialInspection.Subset.ID = new InspectionSubsetID();
messageIn.MaterialInspection.Subset.ID.Value = "0";
messageIn.MaterialInspection.Subset.Operation = new u2026RequestMessage_syncMaterialInspectionSubsetOperation();
messageIn.MaterialInspection.Subset.Operation.ID = "0300";
u2026RequestMessage_syncMaterialInspectionSubsetOperationInspectionActivity activity = new u2026RequestMessage_syncMaterialInspectionSubsetOperationInspectionActivity();
activity.ID = "0010";
activity.CloseIndicatorSpecified = false;
activity.Result = new u2026RequestMessage_syncMaterialInspectionSubsetOperationInspectionActivityResult[1];
activity.Result[0] = new u2026RequestMessage_syncMaterialInspectionSubsetOperationInspectionActivityResult();
activity.Result[0].ID = "0001";
activity.Result[0].AcceptanceStatusCodeSpecified = false;
activity.Result[0].DefectNumberValueSpecified = false;
activity.Result[0].ExceptionIndicatorSpecified = false;
activity.Result[0].InspectedNumberValueSpecified = false;
activity.Result[0].Comment = string.Empty;
activity.Result[0].NonConformingUnitNumberValue = 0;
activity.Result[0].Measure = new Measure();
activity.Result[0].Measure.Value = decimal.Parse("4.15";);
activity.Result[0].Measure.unitCode = "AMP";
activity.Result[0].Text = new Text();
activity.Result[0].Text.Value = "Some Text Here";
activity.Result[0].actionCode = ActionCode.Item01 |ActionCode.Item02 | ActionCode.Item03;
activity.Result[0].actionCodeSpecified = true;
activity.CloseIndicatorSpecified = false;
messageIn.MaterialInspection.Subset.Operation.InspectionActivity = activity;
messageIn.MessageHeader = new BasicBusinessDocumentMessageHeader();
messageIn.MessageHeader.ID = new BusinessDocumentMessageID();
messageIn.MessageHeader.ID.Value = "starlims_update";
try
      u2026ConfirmationMessage_sync messageOut = ws.MaterialInspectionSubsetOperationInspectionActivityResultRecordingRequestConfirmation_In(messageIn);
      if (messageOut.Log.Item != null)
            string message = String.Empty;
            foreach (LogItem item in messageOut.Log.Item)
                  message += (item.Note + "\n");
            MessageBox.Show(message);
catch (Exception ex)
      MessageBox.Show(ex.Message);
Edited by: Michel Roberge on Jul 16, 2008 2:38 PM

See post for solution.

Inspection lot is not getting updated in quant

Hi Experts,
Need your help..
I have posted two material doc with same material following is the consequences :
1.we have immediate TO creation process , so now we have 2 TO's and 2 inspection lots.
2.When i am doing UD for first inspection lot PCN does get created.
3.Now i do TO confirmation for putaway for TR and then TO creation and confirmation for PCN and material is in bin.
4.When i am confirming the TO(TR i.e putaway TO) ,Inspection lot is not getting updated in the quant due to which i am not able to convert PCN to TO
Because in quant i found previous inspection lot which is different from having in PCN document.
So is there any solution which will update the inspection lot in quant once we confirm TO(putaway TO) ?
Any help on this will be highly appreciated.
Regards,
OM

Hi jugen,
Thanks for you help but now i going for below development :
Once UD is done system will take the inspection lot from from the quant and will overwrite to the
newly created PCN
So that during PCN to TO creation (LU04) inspection lot will remain same both in quant and PCN .
Do you have any idea on this i mean where in QA32 tcode i have to write this logic ?
Thank you..
Regards,

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

How to inspect web app using safari and ipad and USB cable?

On my mac I have
OSX 10.10.2 (14C109)
Safari Version 8.0.3 (10600.3.18)
On my Ipad 2 (MC769X/A) i have
OS 8.1.3 (12B466)
Safari Web Inspector "on"
Javascript "on"
There are no "privacy" or "private mode" settings that I can see.
I physically connected my iPad to my Mac and chose that I trust this computer. Confirmed that it's connected by looking in iTunes (and quit iTunes afterwards).
I opened a web app on my iPad that's running on my local server, and then opened safari on the mac.
I then opened the Develop menu and can see the ipad. The menu does not contain any other entries other than "Use for development..."
My mac also shows "No inspectable applications", whatever that means.
If I choose "Use for development" under the iPad menu, nothing at all happens and the menu item disappears.
To get the iPad sub-menu back again I have to quit Safari and then re-open it.

I'm sorry I don't buy this as an answer because:
it's for a question that is 2 years old and for older devices. My devices are all the latest version
I have XCode and I'm a member of the develop program already.
XCode does not offer a way to create a project or other pairing between safari on the mac and on the ipad, since that is a built in feature of Safari
It works with IOS Simulator, but not with the actual device even when all correct steps have been followed to pair / connect them
The problem I'm trying to resolve works in IOS Simulator but does not work on an actual device.

Inspection Charateristic

Similar Messages

Maybe you are looking for