Inspection Lot creation for the 103 movement type
<<Don't ask for or offer points>>
Dear Experts,
we have the requirement of Creating the Inspection lot for the 103 movement type. we have done all the necessary settings for 103 movement type (in OMJJ and under the node Quality Management --> Quality Inspection -->Inspection Lot Creation -->Inspection for Goods Movements) but still I am unable to achieve the results. Same is happening for 105 movements.
Kindly let us know what settings need to be done in order to achieve the same.
Full points will be awarded for the reply
Regards.
Edited by: Matt on Sep 18, 2011 4:44 PM
Hi,
If you have activated two inspection types (eg 01, 0101) of same inspection lot origin (01), in material master you should have a preferred indicator set for the inspection type for which you want to be selected when you perform goods receipt.
This check box is available in the inspection type set up in the Material master.
Also check whether the post to inspection stock indicator is set for the material (in the inspection type), then only material will be posted to inspection stock.
Please confirm, what happens to the stock after making MIGO. check in MMBE and confirm
Go through the link and maintain the necessary settings. I think default settings for 01 type should work.
http://help.sap.com/saphelp_470/helpdata/en/2d/350e4d448c11d189420000e829fbbd/content.htm
Regards
Hari
Similar Messages
-
For the Attribute Movement type(BWA) we use Value " 201" and not "101" why?
Hello Experts,
We are in SRM 7.0 classic scenario,
For the Attribute Movement type(BWA) we use Value " 201" and not "101" and provide the Source syst(backend R/3)
Can you all plz help me understand what is the difference if use value "101" for the Attribute Movement type(BWA)
Also,can you all plz help me understand if we shd use value "101" or "201" for the Attribute Movement type(BWA) and under what scenario.
Any pointers will be highly appreciated.
Thanks & Regards,
RKSHi,
Movment type " 201 maintained for the Classic scenario only.
It is necessary to maintain the attribute if the default material group for a given user (or) sit is set to a backend logical system. The EBP system knows that if the user is set for backend procurement ,that there might be a possibility for a reservation to be generated therefore it checks to see that a value for this attribute is maintained. The BWA value should be defined for the as 201 preceeded by the logical system and a backslash.
101 should not be used. This isfor the Good receipt.
In the extended classic scenario when you do the confirmations in SRM the movement type 101 will be created in the
backend system (R/3 or ECC6.0)
Regards
Ganesh Kumar .G -
Inspection lot creation for inspection type 05
Hi Gurus,
We have finished material FERT & semifinished material HALB.We have assigned insp. type 02 & 05 in material master of matl. HALB.When we create production order for FERT & confirm the order , inspection lot is generated for matl.HALB of inspection type 02.
Now we are reversing the goods issue by movement type mb1a, movement 262.In customizing for movement 262 inspection lot origin 05 is assigned.
My problem is that when i reverse the goods issue with mvmt.262, inspection lot is not created for insp. type 05. What should be the reason behind this? or are any changes to be done to above setting?
Regards
RamHi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar -
Automatic Inspection Lot Creation for HUs (storage Loc.) in WHS
Hi All,
can someone guide me through customizing/with end result expected from client. How can I setup this configuration.
The requirement is all Chem.Raw Materilas are subject to Quality inspection with HU managed storage Loc. with WMS.
Good Receipt is posted Via Vl31n into Quality Stock. Subsequently a Transfer Order will be created & confirmed to transfer of materials from 902 interim storage type to destination storage type and bin. (due to lack of space in the Whse).
Now expected is that when Usage decision made (Quality Managment) the stock type should change from Q to Unresticted within the same bin and same storage type and material should be made available to issue for orders.
Also when GR is done 101 mvt. an inspection lot should generate automatically in Whse under the quant.
Most appreciate your help.
Regards
ChandraHi Chandra,
Generally WM movement type '309' is assigned for posting change (Sap standard setting). This movement type is generally assigned against 321 IM movement type.
Modify the settings for WM movement type '309' as below:
Path: LE -> WM -> Activities -> Transfers -> Define Movement types
- Automatic TO X (activate)
- Activate 'To item can be confirmed immediately'
- Activate 'propose confirmation'
- Activate 'post to same bin'
This should solve your problem.
On your other question
Generally the inspection lot is assosiated with the WM
stock and Quant if the stock Quality stock is posted to bins directly.
Please display the Quant using LS23 and let me know your findings.
Regards
Madhu -
QM & MM : Trigering of Inspection lot creation for Inbound delivery
Hi,
Anybody can let me know how I can triger the creation inspection for the Inbound Delivery.
With Regards,Hello Kamal
I am 100% agree with Bhramankar.
It is possible if there is some Good Receipt is happening there.
As a further addition to it you will be in need to activate the Inspection type 05/06 for the material.
The other way is trigger a QM-Notification with Inbound Delivery. And from The Notification, trigger the lot.
Regards,
Shyamal -
Inspection lot creation for Movement type 531
Dear experts,
following is the procedure
1) Material enter against purchase order SFG
2) Quality checks that and send to unrestricted (its an sampling inspection)
3) Issue this material against production order
4) order is confirmed and GR is done for FG
5) FG material goes to quaity for inspection
6) At the time of inspection of FG it is found that FG is rejected because of vendor material
so we keep that stock in blocked stock. now we create an salvage order by CO07 and issue FG and received SFG vendor material by 531 movement
now my prob is i want to record the defect against vendor material because of which it is rejected and my clint wants the report on reson basis
regards
Sachingo to OMBS... Here you need to do two things..
1. control reason..here u can mention reason for movement for 531 is requied or optional etc..
2. reason for movement..here u need to maintain the reasons as per ur wish..
like 101---damaged
107--- scratched
etc..
If all these are set, then only you can enter the reasons in the MB11 screen and the same can be viewed in MB51 by adding the reason in the layout...
karthick
Edited by: karthick PP on Jun 4, 2009 5:21 AM -
Inspection lot creation logic related movement type
Dear QM Guru,
I'm newly for QM module
I would like to know how config of movement type and lot origin under below config relate to inspection lot creation.
Quality Management>Quality Inspection>Inspection for Goods Movements-->Movement Type/Update Control/Inspection Lot Origin
i try to delete all record of customized movement type 949 that i think it copy from movement type 501 in this customizing then try to GR with this movement type, so system still generate inspection as normal.
then i re-insert the movement back into this customizing again then i wonder that system automatic fill in lot origin for me and this field also gray that not changeable
how system know the appropriate lot origin for this customized movement type?
Please anyone explain to me.
Thank in advance
KonnapaHi,
Inspection lot origins are assigned to movement types in standart. The assignment is hardcoded and cannot be changed. In this customization step you can only see the origin assigned. When you copy movement types from standart the assigned inspection origin also gets copied, and you also cannot chenge this assignment.
What you can do is to activate inspection for each movement type, or to customize selection of the inspection type within the inspection origin assigned.
Regards. -
Inspection lot creation not required for intercompany Stock transfer order
Hi Team,
The client does not want system to create inspection lots for inter comapny STO. But for intra STO system does not create the inspection lot and thye are happy with it.
I have have flagged the indicator "QM not active' for the movement type
101 entry as below at transaction code OMJJ.
101 B(goods movement for Purchase Order) X(Stock Transport Order)
Even after flagging the above indicator, system is still creating the inspection lot at the time of GR for InterCC STO.
Are you aware any other place to control inspection lot creation for Inter company STO.
Thanks & Regards
MangeshThe ispection types assigned to the material are given below.
Z05 Goods Return Inspection(copy of 05)
Z09 Shelf life extension Inspection(copy of 09)
Z89 Inspection for Quality Assurance(copy of 89)
Z90 Goods Receipt for Trading goods( It is a copy of 01 inspection type)
There is no inspection type 08 active in the material .
Thanks & Regards
Mangesh -
Inspection type 01 - inspection lot creation based on vendor batch number
Hi Guys,
this topic has been discussed several times here, but I was not able to find a suitable answer for my question.
I am facing the folowing requirement:
I have activated inspection type 01 for a raw material.
I am receiving a firs goods receipt from vendor A with vendor batch number 0001.
The system creates its own goods receipt batch number 0546 based on internal numbering.
A new inspection lot is created.
I am posting a second goods receipt from vendor a with vendor batch 0001.
The system creates a new batch number 0547 based on internal numbering.
A new inspection lot is created.
I do not want to get the second inspection lot, because I received vendor batch 0001 before and I am assuming it has been inspected or is in inspection.
Option 1: Post the second goods receipt against the first internal batch number created.
I am aware of this need at the moment, but a user is not always checking if there is an internal batch with the same vendor received before.
Can I customize the system to create inspection lots based on the fact that the vendor batch number was received before?
Or do I have to use an exit and some ABAP code to get the wanted result?
Thanks for your advice in advance.You need to use one of the enhancements that Do-Wook has suggested. There is no standard SAP way to suppress the inspection based on the vendor batch number.
With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series. In this case, the lot isn't created than due to the inspection lot control of the inspection type.
With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
You'll probably need to do one or the other. Myself, I prefer the first enhancement.
Craig -
Automatic TO Creation and Confirm for the 321 Mvt type
Hello Experts,
Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
I have already activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe
2.TO item to be confirmed immediately
3.Propose confirmation
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
Please let me know any other settings to be performed
Regards
KrishnaHello Experts,
I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
I made the below settings
I have activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe -"A"
2.TO item to be confirmed immediately - tick mark
3.Propose confirmation - tick mark
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
I have activated in OMKX as below
Table T321-TBFKZ Immediate TO Creation with "A"
T321-TAFKZ TR creation with "X"
After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
Thanks & Regards
Krishna
Edited by: Hariharan krishna on May 25, 2011 8:01 AM -
Inspection lot creation based on "right" inspection plan version
I manage inspection plan ( inspection lot origin 01 ) with Change number; in this way I have differents inspection plan version based on date.
When I do a Good Entry based on purchase order , I need that system creates inspection lot version based on the purchase order creation date and not , as now, based on good entry date
Is it possible ?
When I create the purchase order I send to vendor also the inspection plan characteristich that have to be maintened ; for this reason I need to find same characterist during good entry inspection
Regards
SillyYou need to use one of the enhancements that Do-Wook has suggested. There is no standard SAP way to suppress the inspection based on the vendor batch number.
With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series. In this case, the lot isn't created than due to the inspection lot control of the inspection type.
With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
You'll probably need to do one or the other. Myself, I prefer the first enhancement.
Craig -
Manual Inspection lot creation
Hi,
In our scenario, there is customer inspection which is done after the final inspection.
For this I have configured manual inspection lot creation after the final inspection.
I expect that if a lot exists for a Sales order, it should not allow PGI for delivery.
How can I set this?
Regards
RamakanthWith manual inspection, it may not be possible.But it possible by using standard inspection type 10.For this activate the insp type 10 in material master QM view and create the master data (insp plan). or you can use the same inspection as used for 04 insp type.For this do necessary config changes.Also in QM config, assign insp lot origin 10 to the delivery type used by SD(Std is LF).
Vishal
Edited by: VISHAL JONNALWAR on Aug 20, 2010 11:08 AM -
GL assignment to the new movement type copied from101(GR of purchase order)
Dear friends,
user need another movement type copied from 101 due to diffierent GL assignment needed for the new movement type.
while below is the only combination for PRD(cost (price) diffierences) is OBYC. and the first row is the current GL assignment for 101.
My question is : How do I assign diffierent GL for the newly copied movement type ,say Z01.
General modification Debit Credit
530000 530000
PRA 530050 530050
PRF 530000 530000
Thanks in advance,
LindaHi,
Go to t code OMJJ and locate your movement type Z01. Then go to Account Grouping on the left pane and create a new account modifier there. Then give the same account modifier in OBYC settings and assign the GL account against it.
Thanks,
Atal -
Inspection Lot generation for Movement type 101-O
Hi
I would like to know, which config / Master data need to generate Inspection Lot for Movement type 101-O.
I enter subcontract vendor number and set 'SC Vendor' indicator in purchase order delivery address tab and I created QM data in Material Master.(Insp.Type 01)
While doing GR with reference to purchase Order, stock is Posted to Material provided to vendor - Quality inspection stock. But Inspection Lot
is not generated.
Pl suggest me, What should i do to generate Inspection Lot.
Thanks in Advance.
RRShi
Soln 1) Just check whether Inspection is active for 101 - O in SPRO settings if not, activate the same.
Path: Inspection Lot creation/Inspection for Goods Movement
Soln 2) As you flag "SC Vendor" in PO and make GR all stocks will be shown against the Vendor.
From your question I assume that you would like to do inspection for materials coming from Subcontactor end to your Plant:
If this is the case you dont flag "SC Vendor" in PO, make a normal Goods Receipt for the Subcontracting PO, based on Insp setup in Material Master for 01 Insp type Insp lot will be created.
Regards
DC -
Inspection lot creation while partial comformation in 03 inspection type
Hi
I want inspection to be created while partial confirmation of operation in CO11N in 03 inspection.
It is happening with release of production order.
PLz let me know -if anybody can help.
Regards
PoojaHi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar
Maybe you are looking for
-
Open sso enabled app in new browser window
I have a java app deployed to OAS and secured with Single Sign on. I would like my app to open a report and display it in a new browser window. When the new window opens I am getting an error stating that user is not authorized to access the report.
-
I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycl
-
How to open files from the SAP DMS (DOC Mgt. System) ?
Hello All, I making the Transaction CV04N in BSP. When I execute this CV04N I should give a DOC Nr and the list is generated for this DOC.Now in the List if I select one Record and then Press Display Icon then the content of this list is open
-
Parallel process in select query
Hi Experts its production stats are good indexes are good issue : a select query is taking time 20min , the indexes exists on the where clause columns, I tried the query using parallel hint it gave the results iin 20 sec. the DOP of the table set to
-
Part content of a text field into two columns
Hi, I have a question regarding text field objects in Crystal Reports 2008 (SP3) for my ASP.NET app. I want the text object to have a maximum height and a column width. After the text object has reached the maximum height it should continue rendering