Inspection Lot Error QA 186
Hi,
When i do good receipt for Purchase Order i have got this meesage for only one purchase order item. Other items are posted with out any issue for the same material and Inspection lot also created.
No inspection lot could be created for item 0001
Message no. QA186
Diagnosis
The inspection lot processing data is inconsistent. An inspection lot can therefore not be created.
Procedure
To find the inconsistency, call up the function for creating an inspection lot and proceed from screen to screen.
The error messages displayed there will provide additional information why an inspection lot cannot automatically be created.
Note
You do not need to save the manually created lot.
Did you do as the error message suggested? Did you attempt to create the lot manally using QA01, the purchase order number and 01 inspection type?
The error message is telling you something is wrong and that by stepping through the manual creation process, you will probably find the problem.
Try this, see what errors you get during the process. If you can't resolve the issue, come back here and post the error messages you get during the manual create process. Then maybe we can help you.
FF
Similar Messages
-
Inspection lot Error while executing MIGO
Dear SAP Gurus,
I have executed MIGO once for a particular material and vendor, for which i have activated inspection setup in material master. So I have successfully executed MIGO and also lot quantity for required qty in MIGO was listed in stock overview.
Again, when i wanted to do MIGO for same material and vendor, I am get the following error msg: QA228
" No inspection lot can be opened for this material and vendor"
Please help.
Regards,
Prashanth PaiDear Prashanth
Please cancel the GR, now check the following
1. material master qm view, did you add the 01 insp type, check , check the post to inpsection lot chk box is activated or not.
2. check whether movemnent type 101 is activated for Insp lot creation during GR or not eithr inside QM for logistics or IN Txn OMJJ
3. Ensure You already have the quality plans with Task assigned. Your inspection types should have the characteristcis assigend to it
chk out all once ok then you do the GR
regards -
Archiving batch- material used in inspection lot error
Hai,
I am trying to archive a batch, but I do receive the below message:
u201CMaterial is used in Inspection Lotu201D. Message number W4123.
Prior to this I archived the existing Inspection Lot using u2018QM_CONTROLu2019. The status on the inspection lot is now ARCH. There are no other open inspection lots for this material/batch.
I ran MM_SPSTOCK to archive the associated batch number. But still I get message "Material is used in Inspection Lot".
Note We are not using Long term Inspection.. We are in ECC 6.
Did anyone has this same issue before?
Thank you in advance!
SonaliSonali
Just check the existing batch & Material combination - that particular material -recurring inspection09 is selected or anyone of the batch & Material is QI stock.
Thanks
Sami -
Sales Return Inspection lot status Error
Dear Friends,
I am Getting error while doing sales return processing in VL01n - Goods Issue.
Error Message - Status of Inspection Lot 0600000002 / Partial Lot does not allow Goods issue.
I have already done the settings in config, Assign Inspection Lot Origin to Delivery Type
Also material code has been activated with the inspection type 06.
What could be the reason for the error for goods issue for sales return?
Regards,
AnilHi Vinay,
Thanks for reply.
I have already cleared the inspection lots with Usage decision.
Error message number is VL171 during delivery.
Regards,
Anil -
Error while processing inspection lot
Hi ppl,
While processing the inspection lot thru QA11 , in the production system " Inspection lot <Number> is being processed by <user name> error is triggered.
Could anyone tell me the possible cause of this error and how to rectify it.
Moderator message : Not enough re-search before posting. Thread locked.
Edited by: Vinod Kumar on Aug 30, 2011 2:19 PMHi
Can you please tell me what is the 5 digit code of the error message?
Regards
Olivia -
QM-SD: Sales Return Inspection lot status Error
Hello Expert,
I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
Message no. VL171
The inspection type is 06 (Inspection for Returns from Customer).
The movement type is the 651.
I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
Please let me know what could be the reason for the error for goods issue for sales return?
Thanks in advance.
Pablo
Sales Return Inspection lot status ErrorDear Nunez
1) 06 inspection lot gets created when you create a delivery not when you do the GR.
2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
1) make use of movement type 653 instead of 651
2) activate 05 inspection in the material master. (deactivate 06)
3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
regards
gajesh -
SD-QM: Sales Return Inspection lot status Error
Hello Expert,
I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
Message no. VL171
The inspection type is 06 (Inspection for Returns from Customer).
The movement type is the 651.
I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
Please let me know what could be the reason for the error for goods issue for sales return?
Thanks in advance.
Pablo
Sales Return Inspection lot status ErrorDear Nunez
1) 06 inspection lot gets created when you create a delivery not when you do the GR.
2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
1) make use of movement type 653 instead of 651
2) activate 05 inspection in the material master. (deactivate 06)
3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
regards
gajesh -
Error in Setup Tables for QM Inspection Lots
Hi,
I have an issue when I attempt to fill the setup tables for QM that I receive the following error for the Inspection Lots (QV) only. When I fill the setup tables for Notifications and Inspection Results, then these are OK and use the same standard function module 'qmex_inspection_lot_import_ini'.
"Internal error in program SAPLQMEX, function module / subroutine qmex_inspection_lot_import_ini, code 1".
Has anyone any ideas of the cause or have you experienced this before?
Thanks,
ScottHi,
The most likely reason that leads to the above error message in your
system is an inconsistency of the inspection lots.
To get the inconsistent inspection lot,please check your system in the
following way:
- transaction OLIQBW for running Setup table
- switch on debugging mode
- set break point in the function QMEX_INSPECTION_LOT_IMPORT_INI
on the line:
ELSE.
MESSAGE e011(qmex) WITH sy-repid
'qmex_inspection_lot_import_ini'
'1'.
> then excecute F8 to go to this break point.
- double klick on ' l_qals-prueflos'
on line 77 in the same function QMEX_INSPECTION_LOT_IMPORT_INI:
READ TABLE qave_tab INTO l_qave
WITH KEY prueflos = l_qals-prueflos < here !
BINARY SEARCH.
Please check following note:
305244 Missing operations for the inspection lot
89541 Inspection lot exists w/o status object: EM BS001
536769 Inspection lots without status object
Thanks,
Venkat -
Error in inspection lot of lot origin-16
Dear Experts,
For inspection lot of lot origin 16, I am getting following error-
*"No inspection lot, because no relevant packages found in inspection plan"
For your information -The inspection lot is already created.
Can anybody please explain why this error has occured? & how to tackle this error?
Regards
Vivek DeshpandeDear Experts,
Actually the problem was with the key dates of inspection plan & inspection lot.
After through investigation the root cause find out & now the problem is resolved.
Thnks for your kind support.It was helpful for me to do the trouble shooting.
Regards
Vivek Deshpande -
Error: While GR, Inspection lot cannot be created
Hi All,
Im unable to GR, Its giving the error inspection lot cannot be created. But I activated the Inspection type(1) in the Material Master.
Pls advise ASAP.
Regards,
Pranitha.Hi,
You have added Inspection Type "01", also check whether it has been marked as "Active"
Also check whether you have created MIC (QS21) and Inspection Plan (QP01) and assigned in QS61. -
No inspection lot can be opened for this material error is coming during GR
dear friends,
no inspection lot can be opened for this material error is coming during GR. what is the cause for this and how to solve it. please suggest me
regards,
KrishnaHi,
i think you have maintained the quality view and activated the inspection. but you have not created any inspection lot task list for the material and plant. thsi you can create through QP01 there maintain the material and plant. then enter in inspection plan give usage 5 and status 4. save it and try to check it with QA32 and see the lot. it should be released then only you can give usage decision.
regards,
Adwait Bachuwar -
QM error for old inspection lots
Gurus,
We encountered the following error when we are saving old inspection lots with inpection end date
05/15/2006... please advice how to proceed
Error:
The current inspection stage is not available
Message no. QD704
regards,Hi,
Do we need to change the posting date to match the insp end date to proceed?
please advice,
regards, -
Error During inspection lot creation
Hi Experts
While i am doing GR against production order, i am getting the error "Operation QM12 not available for this lot".
Inspection type 04 is activated for this material and this error is coming during the inspection lot generation.
I am not able to post the GR and not able to create inspection lot.
Please help me to come out of this error.
Thanks
BalaHi Sujit
When i removed the tick mark on the below options in Inspection type "04", the previous error message has gone.
Now i am getting different error message, plz see the below details of error message:
No status object is available for INL 0
Message no. BS001
Diagnosis
When trying to read the status of an object (INL 0), a system error occurred: For object number TM0000000001QL there is no status object.
Procedure
Please contact your system administrator
Regards
Bala -
UD error for old inspection lots
Gurus,
We encountered the following error when we are saving old inspection lots with inpection end date
05/15/2006... please advice how to proceed
Error:
The current inspection stage is not available
Message no. QD704
regards,Hi,
You posted the same question under the forum of business process expert! You should check the posting date of old inspection lots before you save them!
Good luck
Z.T -
Error in quant generation after creation of inspection lot
Hi All,
Our client is using the standard customer return process which is integrated with the QM.
Problem : If the return sales order/delivery contains two similar line items with same material/batch then system creating different inspection lots after post goods receipt (Mov type 651) but only one quant is getting generated for total quantity with only one inspection lotn umber. Quant is not generating for remaining inspection lots. Please suggest the solution or SAP note?
Thanks in advance.Hi
If you are using TAXINN procedure, check apart from VK11 check you have maintained TAX CODE for excise condition types. Example FTXP or VK19 (using application as TX). Also check whether you are using UTXJ condition type. If you are using UTXJ condition type then please remove it.
For TAXINN you need not have UTXJ condition type.
Regards
MBS
Maybe you are looking for
-
I upgraded the version of iTunes about a week ago but have not logged on since. when trying today I have received the following message - "This version of iTunes has not been correctly localized for this language. Please run the English version". I t
-
Issues with still photos (size/cropping) in IMovie
Hi, I been searching and despite trying to solve this issue myself and through taking the advice given in similar posts, I still have not been able to resolve this issue. When making a video/movie, my still pictures get cut up. The tops are noticeabl
-
I have English (Australia) and English (United States) in the same order installed in the Language panel. I try to remove the redundant English (United States). I click Options to open it. I found the option Remove for the Input method is dimmed ou
-
i tried to publish a webpage and i get this error when the page is published. I am not and expert so i am gonna need some help from those who knows this product well. error - /path-to-domain/pagename.ext on line 296
-
CS3 Eraser tool: Did you mean it, Mordy?
In Real World (p. 114), Mordy says that dragging the new, funky Eraser across a portion of a stroked path or a brush stroked path will require the re-application of the stroke (or brush stroke) to the surviving segments. I infer from this that the Er