Inspection lot for production order lot and not for single pieces

Dear all,
I have a production order , for example, for 12 pieces / serial number . Material is produced in lot , in this case 3 lot of 4 pieces.
Pieces in a lot are linked toghether in a grap.
Production order create an inspection lot where I can store quality data for every pieces / serial number.
I need to store quality data at lot level ( for example the grap weight );
Is it possible ?
Regards

Can you not create Char/MIC like weight & attach the task list to the inspection lot?

Similar Messages

  • IDoc Configuration for Production Order Creation and Change

    Hi All,
    Please Help me out for IDoc Configuration for Production Order Creation and Change
    I have found the IDoc for Production Order
    Messgae Type : LOIPRO and IDoc type : LOIPRO01
    Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
    I have done following Configurations:
    1. RFC Destination created for XI system
    2. PORT was created for XI
    3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
    I need to know how to do the followning.
    1. How do i configure the outbound Production order idocs when Production Order is created or changed.
    2. in NACE (Output control) which is the Application for Production Order.
    3. How can I set IDoc as output Type for Production Order Creation.
    Thanks in advance
    Dhanabal T

    Hi Michal,
    I know that it is the old thread but still want to get clarified from you out of curiosity.
    Unlike other IDOC, i actiavated change pointers for LOIPRO
    1.message and idoc type is linked
    2.function module , message type , idoc type is linked
    function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
    3.BD64, distribution model is created and distributed
    4. port and partner profile is in place.
    5. IDOC is not getting generated after creating the process order.
    do we need to activate the change documents for the message type in BD52,
    if yes can you please provide the object types for the same.
    or i am missing something else. please guide me in this regards.
    Thanks in advance for your time.
    S.Janagar

  • How could I set the proxy settings for just some URLs and not for all?

    Hello,
    I am using HttpURLConnection to establish a HTTP connection . The connection pass through a proxy, and it requires security.
    I know that I can set the proxy settings in the system properties, and this works perfect.
    But I don't want to set the proxy settings in the system properties, because this proxy settings will be for ALL the URLs, and I just want for a few URLs.
    How could I set the proxy settings for just some URLs and not for all?
    Thanks

    java.net.URL.openConnection(java.net.Proxy proxy)
    @since 1.5

  • Report to check open reservations for production orders where GI not posted

    Hi experts,
    Can we get reservation details from any report/ table for production order where material has not been issued, report should also display the value of the reserved material.
    I could not find desired details in RESB (it has price but not value) and MB25.
    Thanks in advance, useful ansers will be rewarded.
    Thnx
    Anand

    Hello Anand,
    there is no report but you may use the production order info system with list "components" and create a layout contaning the issued quantity and/or the final issue indicator. With a correct sorting, the list should show all orders with non-issued components at the top.
    Regards, Andreas

  • Enhancement for Production Order Release and Batch Fixing.

    Hi Experts,
    I have assigned a enhancement for production order.The user exit is also given in the req as PPCO0001 through which i have to call a Z-Program for Batch fixing using Trans CO01 and release the order before saving once it is assigned to components.
    Now my probs is where to start working for the enhancement -is it possible to use any BAPI instead of Batch (BDC) or I can use any BADI instead User Exit.
    So if you guys have similar scenario worked on it or have similar example approach to solve it.Please do help.I will reward for all helpful answers.

    I figured out thr friends !
    Thanks,
    SriRam

  • Table for Production order planned and Actual cost

    Hi Experts,
    Can anybody please tell me the name of table where Production order planned and Actual cost gets saved ?
    Thanks in advance.
    Regards,
    Bijay

    Table COEP
    don't forget the points

  • Run time error while running BDC for production order creation and confirmation:

    Dear Gurus,
    We have a situation, where the users are trying to do the entries creation of order or confirmation (through manual and BDC). But, if there is any kind of a deficit quantities in consumption or GR quantity, then it is going to run time error and Dumps are coming in program SAPLCORB
    and the transaction code is coming for CO11N.
    How to avoid this error to run the production system in smoothing way...Any flash lights on this will be great full
    Regards,
    Madhu.G

    Hi Madhu,
    Expert Caetano has rightly point out. Refer Note 1840705 - RAISE_EXCEPTION short dump if running CO11N in background
    Cause
    The short dump is triggered because SAP transaction CO11N contains new GUI elements that cannot always be dealt with in a background process,
    such as the confirmation texts.
    Resolution
    SAP recommends that the standard production order BAPIs, such as BAPI_PRODORDCONF_CREATE_TT, should be used to post a confirmation in background.
    If this is not feasible, the following workaround may be uses:
    Define a confirmation profile in transaction OPK0; 
    In the detail areas, remove the area "Confirmation text"; 
    Set this profile as standard, so that it is chosen automatically by the system when a batch-job
    is started; 
    Assign this confirmation profile to the batch user with transaction SU3 using parameter CORUPROF.
    Also see Note 429432 - CO11N: Batch input in background dumps if long text is maintained
    Refer to note 1154692 - Endless loop during confirmation in background if you doing Auto GR during confirmations
    Thanks & Regards,
    Ramagiri

  • Change pointer triggers for one order type but not for other with LOIPRO

    Hi all,
    We have old production order type ZP01 since last 3 years. Idoc LOIPRO are triggered properly. Now we introduced new production order type ZP02, but idocs are not triggereing for these prod. orders. They both are production orders with different order types but same message type LOIPRO
    I noticed that change pointers are not getting written to CDHDR and CDPOS for this new order type. For old order type they are getting written to CDHDR/CDPOS. Does any one know where is the issue in config.
    Currently BD52 contains following entries for LOIPRO
    ORDER-AFKO-AUFNR
    ORDER-AFKO-KEY.
    Thanks in advance

    Anyone with an idea.
    The project went live by using RCCLORD or RCCLTRAN, but still the same orders keep triggering. How do we restrict the already processed production orders.

  • Caching service only works for OS X updates and not for Apps

    Hello,
    It seems that my OS X Server Caching service only works for Apple OS X Software Updates (in Mac App Store updates, when the icon of Mountain Lion appears). I see it in my logs in verbose mode when I download an Apple OS X Software Updates and not when I download an app in Mac Appstore.
    So I'm sure my Caching service works but not for all downloads.
    Why ? What's wrong with my server ?
    I read in some blogs that Caching Server can work for iOS devices appstore too. I try to download some apps with my iphone but nothing happens in logs ...
    Can somebody help me about the Caching Server ?
    Thank you.

    I am with chugues http://www.apple.com/ios/business/
    Caching Server 2 supports iOS 7.
    By caching purchased content and software updates on a local Mac running OS X Mavericks Server, Caching Server 2 speeds up the download and delivery of content through the App Store, Mac App Store, iTunes Store and iBookstore. Your users get faster downloads of content and updates to their iOS devices directly over your corporate network.
    Shows iOS updates and et al. Why is this feature not on yet?

  • Cash Discount Calculated for One Line Item and not for Other

    Hi All,
    We have devloped a Z program which is used to Write of InterCompany AR and AP recon Account to another GL Account. In this program to clear line item we have created a BDC which calls t-code FB05. Thsi program is running perfectly fine for all company codes.
    There is new company code SG20 for which it is not clearing the line items. It has created a Session in SM35, when we analysed the seesin we found that for some line items system is calculating Cash Discount and for some other line items it is not but the payment Term is same for all the douments with 3% 14days.
    I need your help in understanding that why for some line items system calculates the Cash Discout where as for others it is not calculation..also the Posting Date is same for all the documents.
    Please advise what could be the reson for this.
    Thanks!
    Regards,
    VIvek Srivastava

    Hi
    Cash discount is calculated based on the combination of baseline date and payment term conditions.
    Hence please check the baseline date for all the documents, in which the cash discount is not appearing.
    In your case, the possible reasons could be that 1) baseline date is different between these documents or 2) payment terms cash % is manually modified in the line item of the documents.
    Regards

  • Why an insert journal concurrent works for one app user and not for other?

    We have two app users. User A and User B. They have same responsibilities and grants over same functions and menus. When they run  a custom insert journal concurrent, only user A can execute it successfully.
    User B uses same parameters and data  as User A, but when User B  runs concurrent, it  always  fails
    What is the difference between this users?
    How we can check this difference?

    Hi,
    did you check user specific profile option settings as well?
    In addition, it would be helpful to have some more input
    regarding the error which is raised when user B runs the
    concurrent (concurrent log file output).
    Regards

  • Automatic Batch determination at time of Goods receipt for production order

    Hi SAP experts,
                             Greetings to you all. I wish to ask a query that how batch is determined automatically at the time of goods receipt for production order .
                             I have done the following settings:
    1.Specified batch level at material level
    2.External batch number assignment
    3.Defined production order condition table '501' (plant/material)
    4.Defined production order access sequence (order type-plant -material)
    5.Defined Production Order Strategy type.
    6.Defined Batch search procedure in Production Order.
    7.Assigned Batch search procedure to Production order type for a particular plant  , batch check not activated.
    Please let me know of any more settings to be checked for the same.
    For example, a production order is being confirmed for a quatity of 5 nos . at a time . However, the GI movement (261 movement type) for the production order components  is taking place for 1 EA qty. from 5 different batches.
    So now, how the system will define the GR (movement type 101) for the production order header material for the qty. 5 nos. EA ?
    It is desired that the system should do GR for the qty.  1 EA of the header material for the 5 different batches (batches which were automatically deteremined for the Goods issue of the components).
    Thanks in advance. good day.
    Best regards,
    RB

    HI Rahul,
    As explained earlier, for e.g., if the GR is taking place for the production order for qty. 5 nos. , and in that , if the component qty. is 1 EA for 1EA of header material ; then , the GR for the header material should take place for the same different batches from which the order components were issued for the order and not for the other batches in stock for the header material as well as components.
    I am not sure if i understand your requirement 100%.
    But let me explain you standard behaviour.
    When Confirmation for production order happens and GR is posted during confirmation , All the GR happens agaist same batch number which i sassigned in production order assignment screen.
    So for all the order qty single batch would be fixed. Say batch A1 is created for Header material for 100 qty.
    Now during components issue to production order, If 100 qty needs to be issued for compoenent B it is possible to use multiple batches of componenets ( using splilt batch functionality /or manual batch number entry agaist componenet in goods movement screen) but header batch remains the same.
    Check and Revert,
    Santosh Sarda

  • Business Content for Production Orders

    Dear All,
    we are looking for a SAP standard scenario for our business scenario to get details per production order and workcenter.
    I found already Datasources 2LIS_04_P_MATNR (for production order header data), 2LIS_04_P_ARBPL (for production order operational data) and 2LIS_04_P_COMP (for production order component data), which contain the data we will need to be reported on.
    Unfortunately I'm not able to find any How-To paper or anything like this, where I can see, how these 3 Datasources are coming together in BW. For 2LIS_04_P_MATNR I found 0PP_DS01 in the business content. But I expected to find as well an DSO in the SAP content for the other 2 Datasources. I'm also wondering, if there is a standard cube, where these 3 DSO's are coming together later on to be the basis for the reporting.
    Does anybody of you have any standard documentation of this business scenario?
    Thank you in advance.
    Peggy

    Hi Peggy , There is no standard DSO or infocube available which reports on all the 3 data sources combined together.
    But there are standard DSOs ,infocubes like 0PP_O01 , 0PP_C04 which can be used in a custom multiprovider to draw reports of interest.
    For more details refer http://help.sap.com/saphelp_nw70/helpdata/en/28/500b3c56488e6be10000000a114084/frameset.htm
    Hope this helps
    Sampada

  • Reg.Authorisation for Production Order

    Hi all,
    Please tell me that whether Authorisation can be set for Production order Releasing or not.
    My requirement is One person will generate Production But he is not authorised to release it.
    The Other Person who is senior to him is the only person who is authorised to release the Prod.Order.That is once the Prod. order is generated & saved ultimately a message should reach the senior person with the details of prod. order for him to release.
    How to do it.
    Kindly Give solutions .
    Thanks in advance,
    M.Badrinarain.

    Badrinarain,
    You can use user exit PPCO0007 to serve your purpose.
    Regarding the info to reach the senior person, you can talk to your Basis consultant to have the required settings, when any new order is created, it will be informed via mail to the senior person.
    Hope this helps you.
    SmanS

  • I was trying to use the Matlabscripting VI, but it says it is for instructional purpose and not for research and the system is getting stuck.When I used it two days back it worked.Could U plz tell me what the problem is??

    I have Labview 7.0 and Matlab 6.5 installed on all the computers at my School. When I tried to use the Matllab Scripting Window for the first time, it worked, but after two days when I was trying to run the program, there was a meesage saying that the License is for instructional Purpose only and not for Research or commercial use and the Labview is getting totally stuck. I need the Matlab Scripting VI for my Project,could anyone suggest what I shd do or is there any other method by which I could do that.

    Hello Medha,
    Thank you for contacting National Instruments.
    From the information you have provided, I am not sure what is causing your problem. Make sure that you do not have an evaluation license for LabVIEW.
    What, if anything, was changed in your VI before it stopped working? Will it run without the Matlab script?
    If you continue having trouble getting your VI to work, please respond with more information. If you like, you can post your VI (along with any necessary sub-VIs) and I will take a look at it.
    Have a great day,
    Sean C.
    Applications Engineer
    National Instruments

Maybe you are looking for