Inspection Lot generation for Movement type 101-O

Hi
I would like to know, which config / Master data need to generate Inspection Lot for Movement type 101-O.
I enter subcontract vendor number and set 'SC Vendor' indicator in purchase order delivery address tab and I created QM data in Material Master.(Insp.Type 01)
While doing GR with reference to purchase Order, stock is Posted to Material provided to vendor - Quality inspection stock. But Inspection Lot
is not generated.
Pl suggest me, What should i do to generate Inspection Lot.
Thanks in Advance.
RRS

hi
Soln 1) Just check whether Inspection is active for 101 - O in SPRO settings if not, activate the same.
Path: Inspection Lot creation/Inspection for Goods Movement
Soln 2) As you flag "SC Vendor" in PO and make GR all stocks will be shown against the Vendor.
From your question I assume that you would like to do inspection for materials coming from Subcontactor end to your Plant:
If this is the case you dont flag "SC Vendor" in PO, make a normal Goods Receipt for the Subcontracting PO, based on Insp setup in Material Master for 01 Insp type Insp lot will be created.
Regards
DC

Similar Messages

  • Inspection lot creation for Movement type 531

    Dear experts,
    following is the procedure
    1) Material enter against purchase order SFG
    2) Quality checks that and send to unrestricted (its an sampling inspection)
    3) Issue this material against production order
    4) order is confirmed and GR is done for FG
    5) FG material goes to quaity for inspection
    6) At the time of inspection of FG it is found that FG is rejected because of vendor material
    so we keep that stock in blocked stock. now we create an salvage order by CO07 and issue FG and received SFG vendor material by 531 movement
    now my prob is i want to record the defect against vendor material because of which it is rejected and my clint wants the report on reson basis
    regards
    Sachin

    go to OMBS... Here you need to do two things..
    1. control reason..here u can mention reason for movement for 531 is requied or optional etc..
    2. reason for movement..here u need to maintain the reasons as per ur wish..
    like 101---damaged
    107--- scratched
    etc..
    If all these are set, then only you can enter the reasons in the MB11 screen and the same can be viewed in MB51 by adding the reason in the layout...
    karthick
    Edited by: karthick PP on Jun 4, 2009 5:21 AM

  • Gr po upload for movement type 101

    Dear cons
    We want to upload GR PO UPLOAD FOR MOVEMENT TYPE 101(IMPORTED MATERIAL).We have store data in a excel file. We want to upload. What is the procedure to make a report? Because the procurement cycle of imported case is different to domestic case. For domestic case it is o.k. the problem is in imported case. Because in imported case first we enter invoice known as commercial invoice. Pl. look into the matter. How ABAP Consultant will do it.
    Thanks
    nrk

    Hi,
      In case of import PO's first we have to upload the customs or commercial invoicesfor the PO's.After this we need to prepare a file containg PO number, the uploaded commercial invoice number and the gr details columns.
    Then do the recording for GR's and give that recording to the ABAPer so that a BDC can be prepared for uploading.
    Thanks & Regards,
    Rambhupal

  • GR   PO UPLOAD FOR MOVEMENT TYPE 101 (IMPORTED)

    We want to use Goods receipt PO upload for movement type 101(imported.) I donot know the logic. Pl. give me some idea.For domestic case one T-code is presently running. The problem is in case of imported p.o. waiting for your early response.
    THANKS
    NRK

    hi,
    even for Imported PO ur using the same Tranasctioon code.
    but check ur proceedure.
    u need to book the MIRO for duty payment, attach the same to MIGO, while doing the GR, then Jid for posting the duties.
    again MIRO for invoice payment to vendor

  • Inspection lot generation for 343 movement type.

    Hi,expert,
    My client's requirement is to generate inspection lot when a specific type of material is transferred from block stock of a storage location to unrestricted stock of another storage location i.e. movement type- 343, can anybody please explain how to generate the inspection lot and what are the settings, master data to be maintained? thanks in advance.
    rgds
    rajib

    Hi Rajib,
    In first place you need to have Quality infor record for material and vendor create through QI01 t code.
    QM must be activated for mvt type 343 in SPRO --> QM --> Qual Insp --> Insp Lot Creation --> Inspection for goods movements.
    Check the box "QM Proc. Active" in Mat master in Quality tab.
    Activate inspection type 08 in mat master.
    Then do the transfer posting you will get mat doc number.
    Go to display mode of mat doc,
    You will find Ins lot number created in Quantity tab at item level of material document.
    Thank You,
    Anand K

  • Some key figure are not update for movement type 101

    Dear All,
    I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
    I have loaded the data according to stranded procedure in "How to Load...."
    I have checked the values of material in R3 and it is there.
    Example of the record::
    Material    Plant Movement type  Calender Day    quanity Base Unit
    10101      01       350                     01.02.2006     20             KG
    10101        01       101                     05.07.2006                      KG
    10101         01      101                      10.07.2006                      KG
    The Quantity is not appearing in second and third record.

    Hi,
    Please check whether you have set  ''Rule groups''  at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
    Please check whether you have set this option at transfermation level.
    For example, may be in your case materials from different plants are updating to different key figure.
    Thanks,
    Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

  • GR/GI Slip No Mandatory for Movement Type 101 and 102

    How to make 'GR/GI Slip No' mandatory in transaction 'MIGO' for only movement type 101 and 102.
    Regards,
    Piyush

    Which user exit?
    MB_CF001  Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0002  Customer function exit: Segment text in material doc. item
    MBCF0005  Material document item for goods receipt/issue slip       
    MBCF0006  Customer function for WBS element                         
    MBCF0007  Customer function exit: Updating a reservation            
    MBCF0009  Filling the storage location field                        
    MBCF0010  Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011  Read from RESB and RKPF for print list in  MB26           
    Please suggest.

  • Layout for movement type 101 (MB01)

    Hi experts,
    1) I would like to know more on how can I define the layout for MB01 other than using screen variant?
    2) Also, I would like to know more on how can I define layout for movement type lower than 201?
    I can only do that for movement type > 201 in SPRO.
    Thanks and regards,
    JT

    Hi Parag Mahajan,
    Just want to double confirm with you about this.
    What if I want to grey a field or make it available for user to make changes to a grey field?
    My problem is tcode MB01, the Document Date field was grey and defaulted to today's date. I want to make it available and allow user to change the document date.
    Thanks and regards,
    JT

  • Inspection lot not created for movement type 101 O

    Dear all,
    . We are creating a PO (ME21N) indicating in the view u201CDelivery addressu201D the same vendor than the PO and the flag u201CSubcontracting vendoru201D
    . The material has in MM02 the inspection type 0130 Receiving Insp. from External Processing.
    . There is QM plan with the Usage 53 GR external process.
    . When we do MIGO 101 u201CSpecial Stock Indicatoru201D O Parts prov. Vendor. The system doesnot create an inspection lot.
    But in MMBE the stock appears in u201CStock Provided to Vendoru201D u201Cquality stocku201D. The customer wants to control that stock in u201CQuality inspection:
    Can somebody help me?
    regards
    shilpa

    SPRO - QM - Quality inspection - Inspection lot creation - inspection of goods movement - Deactivate Quality Inspection for a Movement Type
    Check in this setting, whether QM is deactivated for 101 and special stock O

  • GR quantity for movement type 101 not updated in PCA

    Hi,
    Does anyone have an idea why quantity is not updated in GLPCA-MSL for 101 movement type?. It has updated in FI (BSEG-MENGE) but not in PCA (GLPCA-MSL).
    Appreciate prompt response.
    Thanks,
    Rashmi

    Hi
       With note 834458 a statement for activity RMWE was introduced but removed again with note 962731 as this caused double quantities in PCA. Please read these 2 notes and check the coding in your system.
    regards
    Waman

  • BAPI_GOODSMVT_CREATE for mov.type 101 for Delivery

    Hi expert,ù
    I have to use the BAPI_GOODSMVT_CREATE to create a 101 referring to a delivery but I can't find wich parameters I have to set.
    If I refre to a purch.order it works correclyt, but the same settings are not applicable for delivery.
    Any documentations or example?
    Thanks

    Hi,
    Check if this is useful.
    *-Step 1: Create Inbound delivery from outbound delivery
    Input the delivery number, date & creator name
    to impkf structure
    *-- Do MIGO using Outbound delivery
      wa_imkpf-bldat = goodsrecdate.
      wa_imkpf-budat = goodsrecdate.
      wa_imkpf-xblnr = deliverynumber.
      wa_imkpf-usnam = sy-uname.
      CLEAR ws_i_cnt.
    *-- Pass all the necessary details to I_MSEG - item details
      CLEAR wa_wueb. REFRESH i_mseg.
      LOOP AT i_wueb INTO wa_wueb.
        CLEAR wa_lips. CLEAR wa_mseg.
        READ TABLE i_lips INTO wa_lips WITH KEY vbeln = wa_wueb-vbeln
                                                posnr = wa_wueb-vbelp BINARY SEARCH.
        IF sy-subrc = 0 AND wa_lips-lgnum NE space. " only for WH managed
          ws_i_cnt = ws_i_cnt + 1.
          wa_mseg-line_id = ws_i_cnt.               " Line Number
          wa_mseg-global_counter = ws_i_cnt.        " Line Number
          wa_mseg-bwart = '101'.            " Movement Type
          wa_mseg-matnr = wa_wueb-matnr.            " Material Number
          wa_mseg-werks = wa_wueb-werks.            " Plant
          wa_mseg-lgort = wa_wueb-lgort.            " Storage Loc
          wa_mseg-charg = wa_wueb-charg.            " Batch
          wa_mseg-kzbew = c_b.                      " Movement Indicator ( B indicates
    Goods movement for purchase order)
          wa_mseg-erfmg = wa_wueb-erfmg.            " Quantity
          wa_mseg-erfme = wa_wueb-erfme.            " UoM
          wa_mseg-bprme = wa_wueb-erfme.            " UoM
          wa_mseg-menge = wa_wueb-erfmg.            " Qty
          wa_mseg-meins = wa_wueb-erfme.            " UoM
          wa_mseg-ebeln = wa_wueb-ebeln.            " STO Number
          wa_mseg-ebelp = wa_wueb-ebelp.            " STO Item Number
          wa_mseg-migo_elikz = 1.                   " Delivery completion indicator( 1 - set automatically)
          wa_mseg-bstmg = wa_wueb-erfmg.            " QTY
          wa_mseg-lgnum = wa_lips-lgnum.            " WH No
          wa_mseg-vbeln = wa_wueb-vbeln.            " Delivery Number
          wa_mseg-posnr = wa_wueb-vbelp.            " Delivery Item number
          wa_mseg-lsmng = wa_wueb-erfmg.            " QTY
          wa_mseg-lsmeh = wa_wueb-erfme.            " UoM
          wa_mseg-bukrs = wa_wueb-ekorg.            " Purchase org
    *-- Get Vendor Number from STO
          CLEAR wa_ekko.
          READ TABLE i_ekko INTO wa_ekko WITH KEY ebeln = wa_wueb-ebeln BINARY SEARCH.
          IF sy-subrc = 0.
            wa_mseg-lifnr = wa_ekko-lifnr.          " Vendor number
          ENDIF.
          wa_mseg-ean11_bme = wa_wueb-ean11.        " EAN11
          wa_mseg-insmk = space.                    " Stock Type ( space - Unrestricted use)
          wa_mseg-weanz = 1.                        " Number of GR/GI Slips to Be Printed
          wa_mseg-weanzx = c_x.                     " Updated information in related user data field
          wa_mseg-wempfx = c_x.                     " Updated information in related user data field
          wa_mseg-abladx = c_x.                     " Updated information in related user data field
          APPEND wa_mseg TO i_mseg.
        ENDIF.
      ENDLOOP.
    *-- Do MIGO
      CALL FUNCTION 'MB_CREATE_GOODS_MOVEMENT'
        EXPORTING
          imkpf = wa_imkpf
          xallp = c_x
          xallb = c_x
          xallr = c_x
          ctcod = c_migo
          xlisu = c_x
        IMPORTING
          emkpf = i_emkpf
        TABLES
          emseg = i_emseg
          imseg = i_mseg.
      IF i_emkpf-subrc = 1.                  "Inbound delivery creation is success
        ws_c_indelvry = i_emkpf-msgv1.

  • Account assignment for Movement type 101

    Hi,
    Our SAP system prepopulates G/L account 500100 and non-changeable for PO's with A/c assingment category 'Y' - Third party sale. So, when we do a virtual Goods-receipt for this PO, it always posts to 500100.
    I would like to make this field changeable by the user. How can I do it ??
    Thanks
    Suri

    Hello Suresh,
    Go to OME9, select account assignement category Y, click on details (F2), Flag mark "Account assig. Changable".
    Hope this helps.
    Regards
    Arif Mansuri

  • Goods receipt for return PO - MB01-Movement type 101-161

    Hi guys!
    I have one problem with output determination for goods movement (movement type 101 with internal movement type 161).
    I used SAP Note 426554 and for as I know the output determination customizing is ok:
    output type WE03, collective slip, access sequence 0003 , condition table: 72 Transaction/Printed Version/Print ID, Transaction/event type: WE, movement type: 101 - 161, Print indicator: 1Material document printout – 2 Return delivery, Transmission time-spot of the condition record (1 to 4):1-3, print indicator (RM07M-XNAPR) is set manually and maintained as NDR parameter in user master record, Output type print parameter is Plant/storage location (7), printer determination is customized.
    At header level, the document created with MB01 with reference to a return PO, doesn't have the XNAPR parameter (don't know why - it is set when using MB01). It may be this one the reason for not having any output message to print. For movement type 101 (in reference to a PO) all works fine. Just for 101-161 movement type the system doesn't create any output type.
    Do you have some suggestions? What should I do..what else soul I check?
    Thanks.
    Message was edited by:
            Florina Cheta

    Have a look at any of the following notes:-
    1)  Note 171989 - Sales-order-related productn: Custmr exit COPCP002
    2)  Note 520000 - FAQ: Valuated special stocks
    3)  Note 557582 - User exit and valuated sales order stock
    4)  Note 580228 - Incorrect prices for materials procured externally
    5)  Note 983193 - Docu:Externally procurd material in valtd sales order stock
    thanks
    G. Lakshmipathi

  • Field_PERNR available on movement type 101

    Good Day
    Please can you look/investigate whether it is possible to make personnel number an optional field for the movement type 101. In FI I am making the personnel number an optional field for the GL accounts:
    o                    If the personnel number field is required in FI but optional in MM, the field may not be populated in MM (because itu2019s optional) resulting in an error when trying to post a MIGO transaction because a FI document cannot be created.
    o     Currently personnel number (field u2013 PERNR) is not available as an entry field on the MIGO transaction for movement type 101, you cannot add field PERNR to the MIGO transaction because you get the SAP standard error message  Nr: CZ287 u201CField PERNR is not allowed for transaction type 101u201D
    Please can you advise whether it would be possible to add the field_PERNR to the movement type 101.
    Regards
    Ropetra

    Hi,
       Mvt 101 derives some settings from the PO. So if you can get PERNR optional in the PO , it should then be in MIGO for 101.
    Kind regards

  • How to know debit and credit transaction key for movement type

    Hi,
    With T. code OMWB  account assignment simulation we can see all the accounts which are involve for debit and credit enties   but I want to know is there any T. code or method  with which we can know  which transaction key will be debit and which will be credited  like  for movement type  101 the transaction keys are GBB, BSX  WRX  etc.  i want o know whethere GBB a

    Hi,
      Thanks for your reply,  but with this we can see the for GBB which is the credit account and which account is use for debit entry,  like this for all transaction event key like WRX, BSX etc. we can see the G/L account use for Debit and credit,  but i want to know for particular selction of Plant, material , movement type,  my GBB account will have entry in debit account or credit account  How we can know this.
    regards,
    zafar

Maybe you are looking for