Inspection lot is not required at the time of part scrapping

Dear All
Question- We are developed (Z)Scrap process in ECC6
In scrap process,In backgroun rejected parts are moved From PR01 to
RJ01 (Mvt.type-131)
For some parts 04 Inspection type active, due to this parts are
directly not transfered in rjo1.For these parts Quality Inspection
lots are created.
We don't want Quality Inspection lots at the time of scrap.
Plz. give any suggesion

Dear Deepali,
You are not Scrapping a Material, You are just transferring it to Scrap Location RJ01.
and as 04 insp. Type is active, and 131 Mvt is used, system generates an inspection Lot.
i think, by using 03 Insp. type will be beneficial.
you can transfer Scrap Qty to RJ01 without inspection lot.
Regards,
Amol

Similar Messages

Document year not updated at the time of part I Posting

Dear Guys.,
At the time of part I posting the document yaer not updated properly. this is not upodated in some times or some cases only . but it is updating correctly other times...
but i dont know the reason why this document year was not updated.
the field name and table tane is J_1iexchdr- DOCYR.
Excise Transaction type is GRPO.
because of this problem we can not able to do the invoice verification..
REgards
P.Anandhakumar.
Edited by: Anandhakumar Palanisamy on Sep 3, 2009 8:47 AM

Timing
I am not sure what is going on behind the scenes with this web site in the past few days. One day I could not post in your thread at all. Another day
I was receiving Inbox email notifications that were never posted in the Adobe Premiere Elements Forum or were posted several hours after I saw them
in my Inbox email notifications. I was waiting for the problem to disappear on its own. If not, we can post in the Adobe Comments Forum to find out what
might be going on.
https://forums.adobe.com/community/general/forum_comments
Yours has not been the only thread where I have had these problems.
ATR

Inspection lot creation not required for intercompany Stock transfer order

Hi Team,
The client does not want system to create inspection lots for inter comapny STO. But for intra STO system does not create the inspection lot and thye are happy with it.
I have have flagged the indicator "QM not active' for the movement type
101 entry as below at transaction code OMJJ.
101 B(goods movement for Purchase Order) X(Stock Transport Order)
Even after flagging the above indicator, system is still creating the inspection lot at the time of GR for InterCC STO.
Are you aware any other place to control inspection lot creation for Inter company STO.
Thanks & Regards
Mangesh

The ispection types assigned to the material are given below.
Z05 Goods Return Inspection(copy of 05)
Z09 Shelf life extension Inspection(copy of 09)
Z89 Inspection for Quality Assurance(copy of 89)
Z90 Goods Receipt for Trading goods( It is a copy of 01 inspection type)
There is no inspection type 08 active in the material .
Thanks & Regards
Mangesh

ICal Week view, Date is not aligned with the Time(schedule) of each date

Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

Hi,
i omit the scheduling maergin key in material master,
the result of MRP is
BASIC DATES
Finish 15.10.2009
Start 14.10.2009
PRODUCTION DATES
15.02.2010 14:33:25
14.10.2009 07:00:00
scheduling type i planned order is still "backwards"
so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
this seem not right.
it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
Best regards,
Freddy Ha
Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

Inspection lot is not getting updated in quant

Hi Experts,
Need your help..
I have posted two material doc with same material following is the consequences :
1.we have immediate TO creation process , so now we have 2 TO's and 2 inspection lots.
2.When i am doing UD for first inspection lot PCN does get created.
3.Now i do TO confirmation for putaway for TR and then TO creation and confirmation for PCN and material is in bin.
4.When i am confirming the TO(TR i.e putaway TO) ,Inspection lot is not getting updated in the quant due to which i am not able to convert PCN to TO
Because in quant i found previous inspection lot which is different from having in PCN document.
So is there any solution which will update the inspection lot in quant once we confirm TO(putaway TO) ?
Any help on this will be highly appreciated.
Regards,
OM

Hi jugen,
Thanks for you help but now i going for below development :
Once UD is done system will take the inspection lot from from the quant and will overwrite to the
newly created PCN
So that during PCN to TO creation (LU04) inspection lot will remain same both in quant and PCN .
Do you have any idea on this i mean where in QA32 tcode i have to write this logic ?
Thank you..
Regards,

Note messages at the time of availability check in sales order entry form

Hello Friends,
Im getting the following note messages at the time of availability check in the sales order entry form.
ATP Process resulted in no data
User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_rec
User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_tbl
After this when we book the order, the order line status becomes 'Booked' and does not change to 'Awaiting Shipping'
As a result of which im not able to proceed ahead with the rest of the order to cash cycle.
Can somebody please guide me in resolving this error.
We don't intend to use ATP as the client's business process is such that they maintain adequate inventory balances.
Regards
Anil Wadhwa

Hi Anil
Are you using a RAC DB configuration? Please check if this is true, there are special setup steps that are required to be performed in case of RAC DB configuration and this issue usually occurs if such configuration is missing specifically if its happening randomly for some ATP requests.
You can find actual steps to be performed on metalink.
Thanks
Navneet Goel

Subject:-Tax reduction in invoice is not possible at the time of LIV when c

Dear SAP expert
Subject:-Tax reduction in invoice is not possible at the time of LIV when corresponding order is closed.
While carrying out the LIV of vendor invoice against service entry sheet , ERROR message of Order xxxxxxx created in PM module is closed. Main reasons for the same is Service tax at time of service entry sheet is 12% and at the time of invoice verification it is 3.96% and reduced tax amount is credited to order. Which we can say is restricted as after Order closure cost cannot be changed on order.
Is there any solution available?
s ap

Hi,
In response to your requirement:
let me clear my business scenario...
total price of po is usd100 and sales tax is 20%.
system calculate sales tax separate the reason being the codition type for sales tax is statistical.
is it possible that the value of sales tax included in the PO net price but not calculate at the time of GR.
Regards,
Ali
This is very much possible. Include your tax condition type in the calculation of net price and make this tax as deductible.Donot assign NVV key to it.
Also donot make it statistical as you want to include it in the net price calculation.
Thanks,
Atal

Sales tax in PO but not included at the time of GR

Hi,
i have creted the PO including sales tax amount, is there any way when i post the GR against this PO the sales tax amount not calculated.

Hi,
In response to your requirement:
let me clear my business scenario...
total price of po is usd100 and sales tax is 20%.
system calculate sales tax separate the reason being the codition type for sales tax is statistical.
is it possible that the value of sales tax included in the PO net price but not calculate at the time of GR.
Regards,
Ali
This is very much possible. Include your tax condition type in the calculation of net price and make this tax as deductible.Donot assign NVV key to it.
Also donot make it statistical as you want to include it in the net price calculation.
Thanks,
Atal

Service Tax credit posting not happening at the time of Service Entry sheet

Hi
I am accepting (releasing) service entry sheet of some services. Entry was posted:
Service Expense A/c.. Dr
To SR / IR A/c...
As per new service tax law, we can take credit at the time of accrual of services i.e. at the time of accepting service entry sheet. But the service tax posting is not done at the time of expense booking (see above entry). Service tax posting is done at the time of MIRO (invoice verification).
Entry Requirement:
Service Expense A/c.. Dr
Ser Tax Basic A/c... Dr
Ser Tax EC A/c... Dr
Ser Tax SHEC A/c... Dr
        To SR / IR A/c...
Please help how to take credit at the time of posting service entry sheet itself.
Edited by: Meenu_ND on Aug 5, 2011 1:39 PM

HI All,
I hope what he (Meenu_ND) menctioned int he first thread was correct. Service Tax Credit you can avail at the time of Invoice Booking or the Payment and not at the time of Service Etnry Relise. Please check once.
Regards

Service Tax credit entry not happening at the time of Service Entry sheet

Hi
I am accepting (releasing) service entry sheet of some services. Entry was posted:
Service Expense A/c.. Dr
    To SR / IR A/c...
As per new service tax law, we can take credit at the time of accrual of services i.e. at the time of accepting service entry sheet. But the service tax posting is not done at the time of expense booking (see above entry). Service tax posting is done at the time of MIRO (invoice verification).
Entry requirement:
Service Expense A/c.. Dr
Ser Tax Basic A/c... Dr
Ser Tax EC A/c... Dr
Ser Tax SHEC A/c... Dr
        To SR / IR A/c...
Please help how to take credit at the time of posting service entry sheet itself.
Edited by: Meenu_ND on Aug 5, 2011 1:38 PM

HI All,
I hope what he (Meenu_ND) menctioned int he first thread was correct. Service Tax Credit you can avail at the time of Invoice Booking or the Payment and not at the time of Service Etnry Relise. Please check once.
Regards

Without equipment creation serial number required at the time of delivery?

Dear SAPIENTS,
Without equipment creation serial number required at the time of delivery? In customizing i have defined that equipment not required in serialization profile. But still i am getting equipemnt number at the time of delivery of sales order.
Regards,
Kaushal Rai

Dear Venu,
You want to generate Alphanumeric Serial Number that is possible by following Enhancement for Serial Numbers:
Pls find here some details about generating alphanumeric serial numbers as below :
You can generate alphanumeric serial number with the following BADI / Customer Exit:
Name of Enhancement : IQSM0001
Name of Function Module Exit: EXIT_SAPLIPW1_001
Name of Include : ZXQSMU01
ZXQSMU01:
This user exit can be used to create the serial numbers automatically for material of a production order. Number of serial numbers generated will be equal to the total number of quantity. The purpose behind development of this user exit was to attach prefix in each serial number generated.
so as per your requirement you can generate serial number like ABC0001 etc.
Process Steps:
For exit: EXIT_SAPLIPW1_001
1. Get serial number profile for a material in respective plant.
2. Check if the profile is u2018XYZu2019.
3. If profile is u2018XYZu2019 generate the serial numbers for the given quantity of material in production order.
General Program Structure
For exit: EXIT_SAPLIPW1_001
1. Get the serial number profile using function module 'MARC_SINGLE_READ' for a material.
2. Check if the profile is u2018XYZu2019.
3. If the serial number profile is u2018XYZu2019 then generate the serial numbers for the given production order quantity of a material.
4. Concatenate ABC as a prefix to the all generated serial numbers
Provide above details reg. implementation BADI / Enhancement to your ABAPer and go ahead.
You can implement above Enhancement in CMOD.
Hope this helps.
Revert in case of any doubt.
Award points if useful.
Regards,
Tejas

MSC2n next inspection lot to be calculated from the production date

Hi gurus,
My query is
1. In Tcode MSC2n, next inspection lot is to be calculated from the production date and not from last goods movement date. is it possible to get next inspection lot to be calculated from the production date.
2. how to make automatic creation of inspection lot in SAP based on the next inspection date. Right not, it is being done manually using T-code QA07.
thanks in advance
regards
vb

To manipulate next inspection date use user exit QEVA0003.
To automatically create 09 inspection types use transaction QA05, schedule it to run in background at periodic interval

MacBook Pro does not requiring password every time

My new MacBook Pro (Late 2013 Retina) does not requiring password every time (ver. 10.9.2). It is set to require a password and it does most of the time but it often does not. I have seen some posts of other people having this issue but have not seen any fix?

Chisand wrote:
My new MacBook Pro (Late 2013 Retina)
I have seen some posts of other people having this issue but have not seen any fix?
You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Firefox keeps "not responding" all the time ... is very anoring

it happens mostly while using facebook's posting page (FB and the Zynga games on FB are the only thing I'm on most of the time I'm on line) ... I keep running into "FIREFOX NOT RESPONDING" all the time ... I'll go to click on a posting and nothing happens ... when i click again the page goes cloudy and that DARN blue wheel shows up (I hate the wheel) & at top of computer is says "Firefox not responding" ... my scrolling wheel will not work right ... jumps up & down the page or won't move at all ... always have to be refreshing the page or exit firefox & reopen ... looses connection a lot or is out of sync & has to be refreshed ... this started to happen several weeks back after I first downloaded Firefox 4 ... in fact I've had to reload it several times ... this is all very frustrating when trying to play my games ... I've defragmented, run both my AGV & windows washer programs several times but nothing seems to help ... had no problems with earlier firefox so tried to reload it but now can't get earlier version to work either

Hi,
Please try this: '''Tools''' ('''Alt''' + '''T''') > '''Clear Recent History''', choose '''Everything''' in '''Time range to clear''' and '''Cache''' and '''Cookies''' under '''Details''' and '''Clear Now'''. [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History].
If the problem persists, please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Inspection lot status not matching R/3 and APO

Hi,
I am getting an error in CCR report saying that "The inspection lot is in "released" status in R/3 but not in APO". Here I am giving the steps that I have followed to get this error.Please let me know why this error is coming. Can some give idea about this.
1.Planned order converted and released (not an early lot create material).
2.Good receipt done, inspection lot created. Rescheduled in released process order prior to the original start date, in the planning board. Dates update in the order in APO successfully,
The inspection lot shows in APO as the product is not forward processed. (The stock will not appear until the usage decision is made.) There is a CCR report discrepancy, error code 405. The inspection lot is in "released" status in R/3 but not in APO.
Thanks in Advance,
Ramesh M

Hi Sajeev,
Sorry for late response.
Yes,I have made changes to process order dates after GR.
And I am populating these date changes to Insp. lot in user exit in R/3 and sending that Insp Lot to APO using the function module CIF_ADD_INSPLOT_OUT.
I can see the date changes in R/3 as well sa APO.But the release status in R/3 is intact and APO is removed.
This is causeing CCR error 405.
Let me know if you need further information.
Thanks,
Ramesh

Inspection lot is not required at the time of part scrapping

Similar Messages

Maybe you are looking for