Inspection lot no in classification

Hi Friends
we manage our finished product in batch. we want to assign inspection lot no in classification system so that while we trace any batch we can get the inspection lot no for which we get the batch value. Can any body help me for these.
For any further clearification contact.
thanks !!!
Rajsekhar

I don't think in standard SAP you'll be able do that.  The main reason is that the it is not a one-to-one relationship.  It is very easy to have more then one inspection lot for a given batch of material.
You could create a general characteristic of num data type linked to an MIC and utilize it in your inspection lot.  Then the tech would have to type in the actual inspection lot number into that value which would then copy to the batch.  You would only use the characteristic in plans where you want to capture the inspection lot number.
An alternative would be to use a follow-up action on the UD code to copy the inspection lot number directly to the batch record.
Another option is to really ask the business what is the real value of this and do they really need it?  The batch where used list shows full traceability of the batch.   The batch change list should show all the changes to characteristic values.  MB51 should show all inspection lots related to the various material movements.
Just because you capture the inspection lot number in a batch characteristic is no guarantee that all the batch values came from that particular inspection lot.  Initially an 04 or 01 would usually populate the batch data.  But later on, an 89, 09, 06, etc.. could update some or all of the characteristics at some point.  Then what inspection lot number would you show on the batch?
Craig

Similar Messages

  • Batch data transfer from batch classification to inspection lot.

    Hi Gurus,
    My client requirement is that the results he enters in batch classification should get transfer to inspection lot in QM.The results in batch classification will be maintained by prod. person.
    These results should be visible in QM lot and Q.M person should be able change these results and these changed results should get reflected in Batch classification.
    for eg.
    Production person will enter width in batch classification. for eg 1200mm.This value should be visible to QM person in QM lot and it should be modifiable and if modified by QM person(for eg 1300 mm) , the changed value should be updated in batch classification.
    Is this scenario possible in std. SAP and if possible pls. provide the information as early as possible.
    thanks in advance.

    My guess is your having a production person perform an in-process test themseleves or entering in a vendor provided value for the characteristic.
    Why not just set up a separate operation in the inspection plan for the production person?  Set up a workcenter for the operation and do security at that level so the production person can only record against his/her workcenter.
    Create a second operation for the lab with there own workcenter.  Make the characteristic required for the production operation and optional on the lab operation.
    Allow the lab access to both workcenters.
    The lab can now review any data enterred by production, and if necessary, record a new value in there own operation. 
    The UD copies the last recorded result to the batch, (std SAP).
    Craig

  • BAPI for Creation of inspection lot

    I have two scenario:-
    1.Can any body help to find BAPI for creation of Inspection lot for the material under PO envisaged for PDI.
    2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
    My objective is to creation inspection lot without assigning Inspection type of Z01SI01 or Z01SI02 and so on in the material code under a respective Plant 1004 or 1005 0r 1006 so on.
    In my Z Development for creation of inspection lot BDC is run for QA01 as this code created inspection lot on when material code has inspection type Z01SI01 i.e. location of source inspection and vendr code particular classification under 010 vendor class inspection type Z01SI01. System search both the inspection type for both material and vendor then create inspection lot in QALS table by assiging inspection matching inspection on the lot.
    I want to get rid of assignment of inspection on the materilal. If any BAPI or FM is avalable for creation of inspection without assigning inspection type on material code. I want to create inspection lot in which Inpsection type assignment can be done based on vendor class only.
    YPB

    2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
    I am very sure that this is not possible.You can not create inspection lot without inspection lot origin or inspection type.
    Regards
    Sujit

  • One inspection lot for multiple materials of purchase order line items

    Hi All,
    My client requirement is one inspection lot for multiple materials of purchase order line items.
    Please share your thoughts.
    Thanks in advance for early reply.
    Regards,
    Jishu

    I totally agree with Amol.
    I don't think I would touch that development nor would I ever tell a client it could reliably be done through development.
    Knowing what I know about the table structures, I don't think you could create any development for this that could use a significant amount of the existing tables and functionality.  I think you'd have to create all your own Z tables and basically rebuild the functionality.  Tying it back in with SAP data will be difficult.
    You're even looking at all custom screens for your results recording and UD as well.  And if you have follow-on functions like batch classification requirements, batch determination, COA publication, results copy functions, use of DMR and sampling procedures, physical samples, quality notifications, etc. etc.. you could be looking a whole lot of development.
    Craig

  • Inspection Lot at delivery - include manufacturing date

    Hello,
      We have a requirement where for a Product which is being shipped to the customer the manufacturing date of the product on the delivery needs to be within a particular time frame (say 3 - 6 months). If not this is rejected by the customer.
    This division does not want to use Batch Managment, this would  be an ideal solution. I was wondering wether is there a way this can be done by using inspections lot during outgoing delivery ? I was tryng to research Inspection lots , QM is not my strong forte I am trying to understand this process.
    Any standard or customization suggestions would be welcome.
    Thanks for your help in advance.
    Jagruti

    AKM,
    Thanks for the reply back and outlining the different options. Unfortunately we do not have WM in SAP.
    Could I request you to elaborate on the last point
    "But if you are using make to order (special stock like sales order stock, project stock) you may be able to use material classification to select manufacturing date from material document number "
    How can we use material classification in this ?
    Thanks,
    SAPLEARN

  • Inspection Lot report

    Dear Gurus,
    Client needs a report wherein all inspection lots with following status should dispaly in list.
    LTIN: Long-term inspection
    ICST: Short-term insp. completed
    SPCO: Stock Posting Completed
    CLQM: Shoterm Classification
    STUP: Statistics updated
    Please guide as is there any standard report available where we can select status for output display or we have to go for new report development?
    Regards,
    Pradeep

    Hi
    Use selection profile and by this you can find the inspection lots by your status choice. Check below statements.
    Go to SPRO > Quality Management > Quality Inspection > Status Management > Define selection profile.
    Use this selection profile in QA32 transaction to view inspection lots of your choice.
    Define Selection Profile
    In this step, you can define your own selection profiles for inspection lots. You can then use these profiles to find inspection lots by means of their status.
    For a detailed guideline, please refer to the chapter Environment, Central Functions, General Status Management, Selection Profile.
    Recommendation
    You do not have to define your own status profiles to make use of this function, since inspection lots already pass a complete array of system statuses that can be used for selection.
    Activities
    1. Determine which system statuses and possibly which user statuses the inspection lots can pass. Note that the status profiles for the user statuses can differ depending on the inspection type.
    2. Determine which logical links of these statuses result in relevant selection profiles, and define these profiles.
    Regards,
    Sharat

  • Follow-up action : please help - Inspection Lot related

    Hi,
    I am having the following trouble:
    Through MB02, a printout is generated to the local printer (LOCL).
    However, through QA11, when we save, we have a custom follow-up action attached that pops-up a
    dialog screen.
    The follow up action is triggered when a usage decision is changed for the inspection lot.
    The follow-up action (configured in IMG) calls a Function Module and a screen, which in turn populates
    a value into a custom DB table (based on the buttons, on the screen, sending either to LOCL or to a
    zebra printer).
    Now, what has to happen is that after inserting the value into a custom table, it should also open a sapscript and output.
    The Sapscript and print program are there, with the print program being created 3-4 years ago by someone
    else. However, even though we have code in the print program to update nast, in turn creating a message
    for output (1st the custom DB table is checked to see if the values match, MATNRCHARG), It does not update
    NAST. When we go through MB02, it does, but this should happen automatically after selecting one of the radio
    buttons on the original pop-up & selecting print.
    Please help. I don't know what to do and can't enable a debugger from the pop-up and if going though QA11,
    I can't get it to stop inside the print program (only inside the custom FM).
    Cheers,
    John

    hi
    kindly check whether this FM will work for you QFOA_OBJECT_STATUS_SET
    regards
    thyagarajan

  • Creation of inspection lot 04 depending on production version

    Hi Experts,
    could you tell me if it is possible to create a Good Receipt inspection (lot origin 04) depending on the production version used ?
    My material has 2 production versions:
    0001 - production with process order
    0002 - production with repetitve manufacturing
    When I do a GR on process order, I do not want to create an inspection lot 04.
    When I do a GR on product cost collector, I want to create an inspection lot 04.
    As I have entered inspection types in material master data, I do not know how to do the distinction ?
    Thanks in advance for your help
    Best regards
    Amaury

    Hi
    Check user exit
    QBCK0003 |Extended QM check for goods receipt
    Regards
    Sujit

  • Inspection lot  is not getting updated in quant

    Hi Experts,
    Need your help..
    I have posted two material doc with same material following is the consequences :
    1.we have immediate TO creation process , so now we have 2 TO's and 2 inspection lots.
    2.When i am doing UD for first inspection lot PCN does get created.
    3.Now i do TO confirmation for putaway for TR and then TO creation and confirmation for PCN and material is in bin.
    4.When i am confirming the TO(TR i.e putaway TO) ,Inspection lot  is not getting updated in the quant due to which i am not able to convert PCN to TO
    Because in quant i found previous inspection lot which is different from having in PCN document.
    So is there any solution which will update the inspection lot in quant once we confirm TO(putaway TO) ?
    Any help on this will be highly appreciated.
    Regards,
    OM

    Hi jugen,
    Thanks for you help but now i going for below development :
    Once UD is done system will take the inspection lot from from the quant and will overwrite to the
       newly created PCN
    So that during PCN to TO creation (LU04) inspection lot will remain same both in quant and PCN .
    Do you have any idea on this i mean where in QA32 tcode i have to write this logic ?
    Thank you..
    Regards,

  • Inspection Characteristic is not being displayed in the inspection lot

    I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
    But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
    Please let me know how to get the inspection characteristics in the order.
    I have checked the task list, in that the Inspection characteristics is visible.
    Please help
    Praneet

    I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
    Both the Inspection lot the task list is same
    Please reply

  • Vendor code in Stock Transfer Inspection Lot(08)

    Hi Everybody,
    I have noticed that when a Stock Transfer lot is created, the 'Data for lot orogin' tab in the Inspection Lot shows Vendor code in 'Data for goods receipt' section at times and at times Vendor code is not included in this section.
    Please throw some light on the situations under which the vendor code is included and excluded.
    Regards,
    Manish.

    I can't say for sure but I would compare the triggering document.  I.e. Exactly what material movement is used in each case and what type of document triggered it, (I.e. an STO order).  Than look at those documents and see if and why a vendor number is available.
    FF

  • No inspection lot can be opened for this material and vendor -QA228

    Hi every one !
    Iam  getting  Error while doing Migo -"No inspection lot can be opened for this material and vendor-QA228"
    we analyze the issue asfollow -
    1.checked Quality Lot-Available
    2.Quality info record- Availble
    3. Quality plan is exist.
    But stil throwing  above Error.

    Hi,
    Check the below threads,
    [No inspection lot can be opened for this material and vendor;
    [No inspection lot can be opened for this material and vendor;

  • Report for inspection lots

    Hi All,
    Report for the inspection lots that clear UD but still in inspection stock( no posting is done).?
    Thnaks
    vbraj

    Dear Raj,
    Please try report QVM2.
    Best Regards,
    Anand Rao

  • Inspection lot quantity in manual inspection lot (T.Code-QA01)

    Dear Experts,
    I have activated inspection setup "89" with lot origin '89".I have activated this inspection set up to a material in QM view.
    When i want to create a manual inspection lot through T.Code QA01, the inspection lot quantity is a required field. But i do not want to enter a quantity here. I want to create manual inspection lot without quantity. Is it possible?
    If yes, please suggest how to proceed.
    Your help is highly appriciable.
    Regards
    Vivek

    hi
    Use User Exit :QPL10001
    Description
        You can use this enhancement to change all the fields when creating an
        inspection lot. The function module is only run once.
        You must be careful when using this enhancement since this can lead to
        inconsistencies in inventory management. For example, if you change the
        quantity fields.
    Logic:
    Logic will be when you are using a specific Material say MATNR : xyz .......then disable the Qty field LOSMENGE.
    I hope this will help you
    Regards
    Sujit

  • Inspection lot with Production Order

    Hi friends,
    I am PP consultant and need some help in setting up a scanario of Production order with inspection lot.
    I need to setup a scenario where a inpspection lot is created from production order manually (not at the time of release). The purpose is to post few quantity of production order to scrap storage location. Inspection lot needs to be created only in certain production orders where some of the quantity has to be declared as scrap and that needs to be rejected with usage decision.
    can any one please suggest the overview of such scenario.
    Regards,
    Rohit

    Dear Rohit,
    You want to create a manual inspection lot only for the purpose of Scrapping and also want it to be done with Usage Decision.
    You can not use inspection type 89, as it is not stock relevant (Inspection type for Miscellaneous inspection),
    There is one another solution with inspection type 08( inspection for Material Movement), but it might look Lengthy.
    1. Release a Production order. say 100 qty.
    2. If during process, 10 is scrap, then perform Partial Confirmation of 10 Qty.;  Stock will be in Unrestricted.
    3. Now, through MB1B, transfer 10 qty from Unrestricted to QI.
    4. As you have inspection type 08 active, System will create an Inspection lot for 10 Qty.
    5. You can post this whole 10 qty to Scrap while giving Usage Decision.
    I think, in your process, Scrapping is not done frequently, that is why you do not want inspection lot at every production order.
    in that case this solution may solve your problem.
    regards,
    Amol
    Edited by: Amolbook on Jan 12, 2012 3:13 PM

Maybe you are looking for