Inspection lot not generated via CO07

Hi QM Gurus,
Does anyone know how we can generate inspection lot via CO07 (production order without material number)?
I have done the steps below:
Customized inspection type 03 in order type PP03 (OPL8).
Created Reference Operation Sets 50000008.
Created Inspection plan for ROS 50000008 and assign IMC in the operation.
OSS note 675643
Anything I missed?
Any help would be appreciated.
Cheers,
Sun

Hi,
      I think the problem is no material will be maintained. The background is user reference operation set & CO07 to create production order without material. Generally, oritinal insp. type should be maintaind in MM02 QM Tab, then 03 insp. lot can be created while Pro Order released. But now, as no material master is maintained, so we can not trigger 03 in QM TAB, and no insp. lot will be generated.
      I made the moderation like Sun listed, but no insp. lot can be generated. What the note says,it will take the material number from the superior order, conflicts with our purpose (without material).
       So my question is:
      1) whether SAP can generate insp. lot from Pro. order without material
      2) What's the superior order mean?
      Thanks
Edited by: Margaretji on May 4, 2009 4:22 AM

Similar Messages

Inspection lot not generated after goods reciept?

Dear SAPIENTS,
Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
Regards,
Kaushal Rai

Hi Kaushal,
For Inspection lot from GR, 01 Inspection type is enough.
- Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
- Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
Regards,
Keerthi.

SAP QM-EWM - Inspection Lot not generated in ECC

Hi Gurus,
Need your advice with QM-EWM integration.
We are trying to generate an Inspection lot "01" in ECC while using EWM as our Warehouse.
Material is not HU managed so the trigger of IL should be via Good Receipt. If material is HU managed the inspection lot trigger is via Inbound delivery HU assignment.
The following has been done:
Material is QM active "01" not HU set up in ECC
Material is assigned to an Inspection Plan in ECC
We do not have QIE in place
SLOC used does not require HU
Below is the process.
Purchase Order is created in ECC
Inbound delivery is created in ECC and distributed in EWM
GR happens in EWM and reflects in ECC
The question now is it possible to generate an Inspection lot in ECC even if GR happens in EWM? w/o EWM the scenario is generating Inspection lots.

Hi,
"The question now is it possible to generate an Inspection lot in ECC even if GR happens in EWM? w/o EWM the scenario is generating Inspection lots."
No. You need to have the QIE to trigger the inspection lot creation in ECC.
"We do not have QIE in place"
This is the first thing you need.
Somewhere here in this space I thought is also a document describing how to set it up - but could not find it right now.
Brgds
Juergen

Inspection Lot not generated, with MIGO 561

Hello All,
Please help me with this issue.
WHen i do MIGO with 561, inspection lot is not generated.
So there is a setting in spro, if we check that, inspection lot wont be generated.
So now in my IDES, i tried to uncheck that box.
When i save this setting, I get the following error.
"Fill table key for table T156Q only up to position 010".
Please help with this issue.
Regards,
Piyush

To load initial inventory in Quality stock and release it using Inspection lot UD, use movement type 563 instead of 561.
With 561 movement stock is directly posted to un-restricted status. So there is nothing to be released from Quality stock.

Automatic Inspection lot not generated for Inspection lot origin 12

Hi all,
I am not able to trigger the automatic Inspection lot for General Delivery i.e Inspection lot origin 12.
The scenario is, I am creating the STO ( Inter company stock transfer) and against the same STO i am creating the delivery but after delivery inspection lot is not generated. In the material master correct inspection type is maintained also the mvt type 641 is active for QM. The inspection lot origin is assigned to the delivery type in the configuration but still i am not able to generate the inspection lot.
Please let me know i am missing something?
Regards

Hi,
You are missing 1 Config
Quality Management
Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Inspection at Shipping (Tcode OQL8)
mantain inspection origen agenist Delivery type u are using.
also you need to create Sales Info record(QV51)
I hope all other settings are OK then it should work
Edited by: Jayashankardm on Jan 6, 2010 9:59 PM

SAP PM Inspection Lot not generated

Hello Gurus
when I create order IW31 and try to create inspection lot, inspect lot is not generated. Please help

dear friend,
first check in spro ,whether you assigned inspection types to calibration order type ?
second check while creating task list did you assign inspection points ( 300 for equipments and 310 functional locations) ?
third check whether you released the maintenance order r not?
system will generate inspection lot if the system status is REL.
Hope u got an idea.
Regards,
Pardhu

Inspection lot not getting generated after PurcGR

Hi,
Inspection lot not generated after doing GR for a purchase order. what could be the reasons?
for the first 2 puchase orders, Inspection lot was created. however, for the 3rd Purchase order of 100qty, i did GR for 50 qty only. after then for new purchase orders, the material status has become unrestricted and directly going to stock.
Inspection type 01 is mainted in material master
QM info record has been maintained.
please clarify

Hi Nagaraj,
Try the following.
1. Check the inspection set up in the Material Master record for inspection type 01 whether 'post to inspn stock' is selected. If not, select it.
2. Check in Customizing for 'QM in Procurement' in 'Define QM system' activity, 'certified QM system - skip' is marked(Actual QM system). If this indicator is selected no inspection lot is created even if there is an active inspection type. This is valid if you maintain a target QM system in QM view of Material Master (Purchase data).
3. Check in IMG set up :
Quality Inspection -> Inspection lot creation -> Inspection for goods movement - whether inspection lot origin 01 is specified for movement type 101 and also ensure that QM is active for this movement type.
Please revert after trying these options.
Regards,
Swati

Inspection lot not getting generated during SD delivery

Hi QM experts,
I am working on QM in SD function. I activated inspection type 10 in the material master in QM view as shown below.
I created a QM info record SD through QV51 for the combination of customer and Sales organization and assigned the material and quality inspection as before delivery as shown below.
Now I created a sales order for the material with sales organization and when I making the delivery system is allowing delivery and no inspection lot is generated and delivery is also not stopped. am i missing something..can u please guide..
Thanks
Kumar

Hello,
You have activated 10 and 11 both , any specific reason ?
If you activated 10, then system will allowed you delivery check QM customization---> During Shipping. have you assigned inspection type against Delivery type in customization ?
Regards

Inspection Lot not created after mvt 322.

Dear All,
I'm facing a problem : after a movement 322 no Inspection (QM) bach was created in QAVE...
In MMBE WM stock view I've got the lot number (quantity 1, stock type Q), and the storage bin which match with the inspection lot.
When trying to take the UD (QA11), the following error message appear :
MMBE :
Do you have any clue ?
Regards,

Hello Amol,
Thanks for your answer.
I gonna check QALS tomorrow as I don't have access to the system right now.
I need to make some clarifications to my previous message, in fact ten inspection lots was generated under the same material document which had 10 items (via MB1B).
9 Inspection lots has been accepted (321) and successfully put into the free stock by the quality, I only have this lot remaining coming from the same document as other ones.
Material Master/Quality Mgmt and inspection types for this article/Plant has not been changed and are correctly set...
I cannot use MB1B, mvt code 321 to move this QI stock to the free stock as QM is activated... I'll get something like "Change the inspection stock of material 0000000 in QM only".
I thinks that, to clean the stock, the only option i've got is to make an inventory from Q stock (mvt 713).
I'm trying to find out what are the root causes of this problem for this not to happen again....
Thanks again for your help,
Kevin
PS : Just checked QALS table this morning, indeed, the inspection lot does not exist.
So, i've got no trace of it in QM, but I'm able to find it in WM...
Message was edited by: Kevin Bou

Integration with EWM-Inspection lot not getting created

Hi,
Inspection lot not getting created after GR is done.
The scenario is Storage location is connected to external warehouse management,so after the GR is done in the legacy system via interface it is updated in ECC.so while checking the material document inpection lot is not created.
Can anyone please tell me the necesaary check points and integeration steps between WM and QM in this case .
Thanks in advance.......

Hi,
Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
Go to material master QM view, assign and activate inspection type 05.
Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
ntn

No Inspection lot was generated PM

Hi grue
I am trying to create inspection lot. The error says no inspection lot was generated and the error is below. It looks like ABAP problem I do not understand. Please help
System-defined Include-files.                                 *
INCLUDE LSPO2TOP.      " Global Data
INCLUDE LSPO2UXX.      " Function Modules
User-defined Include-files (if necessary).                    *
INCLUDE LSPO2F...      " Subprograms
INCLUDE LSPO2O10.      " PBO-Modul 100, 300
INCLUDE LSPO2I10.      " PAI-Modul 100, 300
INCLUDE LSPO2F01
What I did; Create function location
Create equipment and assigned to FL
Create Notification attached to iw31
Create task list with one pc of material assigned to iw31 with 300 insp.point and MIC view & SAMPLING WAS MAINTAINED. I have no idea where the come from .Please help me this problem is keep coming and I posted few times but no proper answer was given
Very appreciated

Hi ,
First ensure the below config is done -->
SPRO>PM>Maintenance Order Processing -->Maintenance and service Orders -->Functions and settings for order types -->Assign inspection type to order type .. here ensure for your plant and calibration order type inspection type 14 is assigned
For the process plz follow the link (http://help.sap.com/saphelp_46c/helpdata/en/fe/67ec5c9d6f11d189b60000e829fbbd/frameset.htm) in this look into Maintenance Plan for Calibrating Instruments.
Remaining assigning correct inspection points in tasklist , creation of MIC and assigning MIC to task list operation ..
regrds
pushpa

Inspection lot not getting generated for schedule in stability study

Dear All,
Need your urgent help to solve a issue. I need to perform inspection of material after specified interval of time for which i am using stability study process. Following are the steps which i have followed :
1) Create initial sample (physical sample created)
2) Confirm initial sample
3) Initial test inspection lot( Inspection lot created )
4) Complete initial test
5) Specify storage conditions (Physical sample created with CRTD status)
6) Create testing schedule( Maintenance schedule is created )
7) I have scheduled maintenance plan through IP10 tcode. All the calls are getting generated.
Now i have given manual call in IP10, but inspection lot is not generating.
Please help to solve this issue ASAP.

Dear Craig,
Yes i have activated inspection type 16 to material master.
Actually issue is solved now, I have missed one step " Store stability Sample".
Now the lots are getting generated.
i am closing this thread now.

Inspection lot not getting generated by Z inspection type

Hi,
I created a inspection type Z1 , copying the inspection type 01. I guess I maintained all the required configurations or conditions.
I maintained the inspection type Z1 in the QM view of a material with status Active, but I am not able to do MIGO, neither the stock type is coming as Quality Inspection automatically in both the Purchse Order creation and MIGO. As a reslut, the inspection lot is not getting generated.
I am also not able to create a manual lot but QA01, Its giving error as "Inspection type Z1 not maintained for material X" .
Thanks in advance for your valuable suggestions.
Regards
Kunal

Dear check preffered inspection type in material master QM view and do the GRN.
Check and Revert.
Cheers
KK

09 inspection lot not getting generated

Hi Friends ,
I have one material batch for which next inspection date is 7.6.2014 . I have activated 09 inspection type in material master . Now when I am executing QA07 for the material with checkbox " To insp. stock at lot creation" selected and with initial run in days = 4 . System shows following msg in green :
"No batches found for processing"
But it should create a lot for the above batch because inspection date is 7.6.2014 . Stock also exist
Regards

Please go through the following steps & maintain the same
> Batch management should be active against material.
> Next inspection date should be maintained.
> Inspection interval should be maintained according to next inspection date.
> UD must be completed for the previous inspection lot.

Inspection document not generated upon GR

Hi all,
I have created PO and IBD in ERP and it was successfully distributed to EWM, in EWM the Stock Type for the IBD is F1 (Unrestricted-Use in Putaway), while I expect it to be Q3 (Stock in QI in Putaway) because I have assigned Quality Inspection Group to the product, there should be an Inspection Document created while GR is done, but it was not created.
Can anybody tell me how the Stock Type is determined and why Inspection Document was not generated?
Thanks a lot!
Danny

Hi Virendra,
I have activated IOT 4 for my warehouse:
I use Qulaity Inspection Group for the product
I cannot find anything wrong with my configurations, but it is still not creating Inpection Doc.
Thanks
Danny

Inspection lot not generated via CO07

Similar Messages

Maybe you are looking for