Inspection Lot Not Triggered for STO - One Plant to other Plant in same Company

Dear SAP Gurus,
We have a scenario of STO for one plant to other plant with in the same company code.
The process is being followed as follows ;
1. We create stock transfer by creating P.O thru ME21N
2. Create Outbound delivery thru VL10B
3. Doing PGI & Picking thru 'VL02N. Thru movement type '641'
The QM settings are as follows to trigger an inspection lot
1. Inspection lot origin '08' activated in MM.
2. Quality plan is defined and task list is released.
3. 'VL02N' is defined thru 'OMJJ' for movemrnt type '641'.
But while doing PGI no inspection lot is created.
Our requirement is to trigger a inspection lot and Invoicing / Billing only possible after inspection lot Approval.
Please advice.
Thanks

Hi
As per my understanding inspection type 10 should be activated in QM view material master.
Can you please check the below thread and also check some similar threads.
QUALITY INSPECTION FOR OUTBOUND DELIVERY
I hope your problem will be resolved or else revert with your observation.
Regards
D Mohanty

Similar Messages

Automatic Inspection lot not generated for Inspection lot origin 12

Hi all,
I am not able to trigger the automatic Inspection lot for General Delivery i.e Inspection lot origin 12.
The scenario is, I am creating the STO ( Inter company stock transfer) and against the same STO i am creating the delivery but after delivery inspection lot is not generated. In the material master correct inspection type is maintained also the mvt type 641 is active for QM. The inspection lot origin is assigned to the delivery type in the configuration but still i am not able to generate the inspection lot.
Please let me know i am missing something?
Regards

Hi,
You are missing 1 Config
Quality Management
Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Inspection at Shipping (Tcode OQL8)
mantain inspection origen agenist Delivery type u are using.
also you need to create Sales Info record(QV51)
I hope all other settings are OK then it should work
Edited by: Jayashankardm on Jan 6, 2010 9:59 PM

Inspection Lot not creating for 657 mvt type

Hello,
I am unable to create inspection lot for customer returns. Mvt type used by SD module for customer return is 657 ( to blocked stock). While sales to return order with this mvt type, no inspection lot is getting generated.
But when returns are done with 651 mvt type (Returns to QI), I am able to create inspection lots.
Can anyone tell me how to activate inspection for 657 mvt type as I want this stock to go directly to Blocked stock.
Thanks in advance.
Jason

Dear,
Quality inspection stock (movement type is 655)
Blocked stock (movement type 657)
If the given quantity is posted to blocked stock returns first, you can make a manual goods movement posting in the Inventory Management component to transfer the quantity to valuated stock.
Tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data,check which movement type is assigned here change it to 655 and try.
Also go to material master, select "Quality Management" view and execute. There click on "Insp.setup" and press "F5". Assign "06" under tbe tab "Inse.Type" and save.
Now if that material returns from any customer, the stock will be blocked for quallity clearance. Only quality people can give clearance for that material.
Regards,
R.Brahmankar

Inspection lot not created for movement type 101 O

Dear all,
. We are creating a PO (ME21N) indicating in the view u201CDelivery addressu201D the same vendor than the PO and the flag u201CSubcontracting vendoru201D
. The material has in MM02 the inspection type 0130 Receiving Insp. from External Processing.
. There is QM plan with the Usage 53 GR external process.
. When we do MIGO 101 u201CSpecial Stock Indicatoru201D O Parts prov. Vendor. The system doesnot create an inspection lot.
But in MMBE the stock appears in u201CStock Provided to Vendoru201D u201Cquality stocku201D. The customer wants to control that stock in u201CQuality inspection:
Can somebody help me?
regards
shilpa

SPRO - QM - Quality inspection - Inspection lot creation - inspection of goods movement - Deactivate Quality Inspection for a Movement Type
Check in this setting, whether QM is deactivated for 101 and special stock O

Release strategy not triggering for Specif plant

Hi Friends
I configured a release strategy with three charecteristics. P.org, Plant, Net value.
this stretegy is triggering for specific plants which are under a particular company code, and if I change to my plant and P.org. its not triggering.
I have deleted all the classifications and release strategies from, no other data in VV_T16FS_2 , AUSP,T16FV,and T16FS tables except this release strategies data.
do we have any settings at cocode level??????
please respond if answer known
Points would be awarded for for your valuable answer.

Thank you deepak for your quick respond
Actually There were already release strategies with same charecteristics, and with the values of other plants and other P.orgs which are under certain companycode.
these were triggering perfectly for PO
Now created new strategy for plant and P.org under different plant code of different cocde. this strategy not triggering for PO.
but if the release strtegy values replaced by the erlier plants and P.org again its triggering.
Now I created new chars, class, and stategies still same problem persists.
Release stategy working for the values of a prticular company code plants, Porgs.
and already tried your suggestion Cocode as char. but same its working for only that company code not for my companycode

Can you Please Tell Me the Process for service/operation provide by one plant to other plant.

Can you Please Tell Me the Process for service/operation provide by one plant to other plant.
In My Company No Of Plants Like 1000,2000,3000,4000
Plant 1000 Provide the service/operation like (welding ,cutting, painting ) to other plants (eg 2000,3000,4000)
We want to give the profit for plant 1000 and book the service or operation charge in plant 2000 or 3000.
We don’t want to use material code in this process.
Can you help me it is possible or not through SAP PP.

Krishnendu,
Actually in my company we have one plant 1000 that plant provide the service like (CUTTING (SHAFT),WELDING,MACHINING,PAINTING)
actually plant already made one material xyz and supply 2000 plant .
we can use STO in this scenario and set special procurement key 80.
But my requirement is after some time plant 1000 provide few operation in xyz material that material already supply to 2000 plant.
in this case we dont use to produce any material.

Which movement type use for return stock form one plant to other plant in

HI friends i am working on STO PROCESS
i need to transfer return stock from one plant to other plant as a return stock i am using Mvt type 455
but system shows following error
Update control of movement type is incorrect (entry 455 X X _ L)
Message no. M7226
Diagnosis
The system could not find entry 455 X X _ L in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
thanks in advance

Hello,
     I think there is a standard STO movement type you can use. But I can't remember. Why don't you try to find it and test if it fit your requirement?
     There are some information for your reference. Please check on website:
http://www.sap-img.com/materials/difference-for-stock-transfer-and-transfer-posting.htm
Using STO without delivery:
doc.type: UB
GI:351, GR:101
STO with delivery:
GI:641, GR:101
delivery type:NL
STO with delivery and billing:
GI:643, GR:101
delivery type:NLCC , billing type:IV
     And if you want to use the way to return the goods replenishment, try to flag the return checkbox while you create purchase order item. Of course, corresponding configuration is required.

Inspection Lot not coming in QA16

Dear Masters,
I am using inspection lot origin 04.Inspection is carried out by uaing a task list.As soon as the production confirmation is done , inspection lot is cretaed and it is seen in QA32.But the same lot is not coming in QA16 , Why?Please suggest.
Thanks,
Ram

I believe you answered your own question. With free inspection points, it does not show up in the QA16 list. That is because SAP has no idea how many inspection points your going to decide to process. 1? 3? 20? When is the lot ready for a UD? Only you know that. SAP has no clue.
I believe if you had a lot that used inspection lots by qty or time and the inspection points were pre-created, then all results recorded, that would show up on the list.
But with free inspection points, the system has no way of knowing if your done with the lot or not.
Craig

Inspection lot not generated after goods reciept?

Dear SAPIENTS,
Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
Regards,
Kaushal Rai

Hi Kaushal,
For Inspection lot from GR, 01 Inspection type is enough.
- Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
- Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
Regards,
Keerthi.

Integration with EWM-Inspection lot not getting created

Hi,
Inspection lot not getting created after GR is done.
The scenario is Storage location is connected to external warehouse management,so after the GR is done in the legacy system via interface it is updated in ECC.so while checking the material document inpection lot is not created.
Can anyone please tell me the necesaary check points and integeration steps between WM and QM in this case .
Thanks in advance.......

Hi,
Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
Go to material master QM view, assign and activate inspection type 05.
Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
ntn

STO from one plant to other plant

Hi,
Can some one send me the various way's one can send a stock from one plant to other plant with complete flow's.

Hi,
Usually sotck transfers are of two types one is
1. intercompany stock transfer between two plants of differnt company codes again in this two types are there
i) direct step process Or one step: in this the quantity of the supplying plant is directly posted into the inventory of receving plant.movement type of supplying plant is 645
ii)Two step proces:in this the receiving plant has to do the MIGO i.e., goods receipt.movement type of supplying plant is 643
2.intra company stock process i.e., stock transfer between two plants of the same company code.in this again two process
i) direct step process Or one step: in this the quantity of the supplying plant is directly posted into the inventory of receving plant.movement type of supplying plant is 647
ii)Two step proces:in this the receiving plant has to do the MIGO i.e., goods receipt.movement type of supplying plant is 641
For stock transfer configuration process make a small search in this forum u can get lot of stuff.
If it helps reward me .
Regards,
kishore.

Inspection lot not getting generated after PurcGR

Hi,
Inspection lot not generated after doing GR for a purchase order. what could be the reasons?
for the first 2 puchase orders, Inspection lot was created. however, for the 3rd Purchase order of 100qty, i did GR for 50 qty only. after then for new purchase orders, the material status has become unrestricted and directly going to stock.
Inspection type 01 is mainted in material master
QM info record has been maintained.
please clarify

Hi Nagaraj,
Try the following.
1. Check the inspection set up in the Material Master record for inspection type 01 whether 'post to inspn stock' is selected. If not, select it.
2. Check in Customizing for 'QM in Procurement' in 'Define QM system' activity, 'certified QM system - skip' is marked(Actual QM system). If this indicator is selected no inspection lot is created even if there is an active inspection type. This is valid if you maintain a target QM system in QM view of Material Master (Purchase data).
3. Check in IMG set up :
Quality Inspection -> Inspection lot creation -> Inspection for goods movement - whether inspection lot origin 01 is specified for movement type 101 and also ensure that QM is active for this movement type.
Please revert after trying these options.
Regards,
Swati

There's an error while delivery note creation for STO order

There's an error while delivery note creation for STO order even stock available in unrestricted stock
Edited by: sharma aman on Nov 8, 2011 9:00 AM

Dear Sharma Aman,
Check whether the following link helps you.
Mesaage : while creation of delivery : An item with no delivery quantity .)
Please search in google with the error message and definitely you will get some older posts in SDN which is solved.
In that case , you need not wait for the solution as it is already available.
If the solution provided do not suit you, then post it in SDN so that it will be a learning for others.
Try to search in the forum or in google before posting further queries
Thanks & Regards,
Hegal K Charles

How to transfer all materials from one plant to other plants?

How to transfer all materials from one plant to other plants?

Hi
To transfer stock in one step between plants belonging to same company code use movement type "301" and using transaction code "MIGO". IF you like in two step it helps to monitor stock in transit use movement type "303" and "305".
303 Transfer posting plant to plant in two steps - removal from storage
305 Transfer posting plant to plant in two steps - placement in storage
to transfer stock between plants of diffrent company code go for stock transpor order using tcode "me21n"
hope it helps

Inspection lot not created on GR for production order

I want to create an inspection lot upon receipt from production. Task list is set up. Inspection type 04 is assigned in material master. But when I do the goods receipt for a production order, inspection lot is not created. In the quantity tab of material document, I see that the staus GR doc is 7(Inspection lot is created at inbound delivery). I don't know where it is coming from.
Please help.

I'm not sure what you mean by creating lot after receiving.
When you do a GR from production the proper inspection type is the 04 inspection type. Not 05. This is pretty standard SAP functionality.
Check the material movements for 101 (I assume you're using a 101 GR material movement), and make sure in config no one has deactivated QM for the material movement.
Then, make sure you start with a freash production order. Don't copy from a previous one.
FF

Inspection Lot Not Triggered for STO - One Plant to other Plant in same Company

Similar Messages

Maybe you are looking for