Inspection lot not updated with Task list and sample
Hi,
I have created a quality plant and assigned the MICs. When I am trying to Process the quality lot which is created automatically through QA32, I got an error, ,No inspection plan could be found'
When i create an inspection lot system is picking up the Task list and picking up the Sample size.
Please provide some light on this.
Hello Kumar,
Check each and every point given in below document and come up with your observations.
I presume Inspection lot status consists CRTD.
Inspection lots with CRTD status- Causes and Remedies - Product Lifecycle Management - SCN Wiki
Amol.
Similar Messages
-
Inspection Lot not generated, with MIGO 561
Hello All,
Please help me with this issue.
WHen i do MIGO with 561, inspection lot is not generated.
So there is a setting in spro, if we check that, inspection lot wont be generated.
So now in my IDES, i tried to uncheck that box.
When i save this setting, I get the following error.
"Fill table key for table T156Q only up to position 010".
Please help with this issue.
Regards,
PiyushTo load initial inventory in Quality stock and release it using Inspection lot UD, use movement type 563 instead of 561.
With 561 movement stock is directly posted to un-restricted status. So there is nothing to be released from Quality stock. -
Data collection task in Update mode is not posible with Original list
Hi Friends,
When I try to Execute the Task for data collection in sa38.I am getting the Error with in 9 sec.
UPDATE MODE IS NO POSSIBLE WITH ORIGINAL LIST
Message No. UCS0111
Diagnosis :
If you select the indicator"original list"the current task status is ignored.In this case,the system simulates a task run in with all of the organisational units are not yet blocked.Thus,setting this indicator is meaningful and valid only if the task is executed in test mode at tthe same time.
procedure : select the original list & Test run together.
My problem is I can not select the Test run in production server.
Can any one please help me to solve the Issue.I Thank you all for Responding to me.
Hi Dan,
SA38 provides all the needed parameters- Con.Group,Company,Version,Fis.Year,Period,Group currency.
Iam trying to run the task with SA38 for Data Collection.
Hi Lucio,
When I Check the Fields Both the Log & Original list . The programe gives an error message "UPDATE MODE IS NOT POSSIBLE WITH ORIGINAL LIST"
Even when I tried with Log,Test Run & Original List Iam getting the Same error Message "UPDATE MODE IS NOT POSSIBLE WITH ORIGINAL LIST"
I can run the task Successfully with selecting the Log option only. But my Client need to Use both Log & Original list ( as they used to run in BIW 3.5 ) Now it we are using BI 7.
Hi Christopher,
We are running the programe UCBATCH01,with the T code SA38.
Hi Eugene,
I will look in to the link and i will Discuss with the Basis team.
Once again Thank you all for responding
Suraj. -
Integration with EWM-Inspection lot not getting created
Hi,
Inspection lot not getting created after GR is done.
The scenario is Storage location is connected to external warehouse management,so after the GR is done in the legacy system via interface it is updated in ECC.so while checking the material document inpection lot is not created.
Can anyone please tell me the necesaary check points and integeration steps between WM and QM in this case .
Thanks in advance.......Hi,
Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
Go to material master QM view, assign and activate inspection type 05.
Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
ntn -
Inspection with Task List Issue
Hi Gurus,
I have a situation where I am creating a "shell" Material. We are taking samples of Blood and just throwing them away. We don't need to have Inventory on them or costing. I just want to use the QM module to keep the inspection results/data.
I had my Materials team set up a Material with only the Basic Data 1&2 views and the QM view. I want to use Physical Samples to keep track of how many samples we inspect.
My issue is... I tried to Inspect with a Task List and it is "Greyed" out on the Material Master. It will not let me select it. I am using the inspection type 15 (Physical Sample).
Can someone PLEASE help me get this Task List check box not grey?
Thanks so muchThis field should be defaulted in from configuration. Change the defaut vales for inspection type 15 in configuration.
I think someone, at some point, changed this config in your system as I believe this is delivered by SAP as defaulted for inspection type 15.
You might try using mass transation QA08 to set this for any materials you have already set up after changing the config.
FF -
Podcast List view not updated with iTunes 11.3.1.2
Podcast List view not updated with iTunes 11.3.1.2
Windows 7 Enterprise Service Pack 1 / Intel-i7 2.40 GHz / 8GB RAM / 64-bit
iTunes 11.3.1.2
After refreshing my Podcast list, some Podcasts with new episodes do not display the "Unplayed" blue dot.
If the podcast "folder" is expanded by clicking the triangle, the new episodes are shown with a "Unplayed" blue dot.
A new episode is shown in the My Podcast view, with the correct number of new episodes.
The new episodes are displayed in the All Unplayed view.
I've tried deleting all episodes and downloading new episodes from the iTunes Store.
I've tried Unsubscribing and deleting the podcast, then Subscribing again from the iTunes Store.
Neither attempt resolved the issue.
I've seen this issue for a while, and was disappointed to find no change with the iTunes 11.3.1.2 update.it finally worked; got my Rush 24/7 downloaded, and it finally found my iPhone after switching from the USB 4 port Hub to a dedicated USB 2.0 slot on my laptop.
-
PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins
Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
Anyway thanks again -
Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.asHi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ -
Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?
What's more, they don't even show on the bluetooth devices list..
-
I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?
It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words. -
Batch Characteristic not updating with result for linked MIC
Hi,
I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
Can you help regards?Ok. I am a little bit further.
I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
Hope that this can help to solve my problem.
Regards,
René
@ Mayank
Above, all the master data and customizing is mentioned to transfer the result to the batch classification
Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM -
Dear all,
Can you pls clarify what is task list and how it is related to MIC.
Regards
Sougata Das.Hi,
In SAP PM ->We use Tasklist for preventive maintenance purpose , it is where we record set of Tasks/ operations that we need to perform for maintenance activities , the set of operations can be as specified in Manfacturers manual
MIC :- Master Inspection Characteristic we can link to operation in Tasklist
For one Operaiton in tasklist we can have any number of MICs linked ..
In PM :- We have Eqpt tasklist, Function location tasklist , General tasklist
Thus this Tasklist is used in Maintenance Plan with calibraiton order type PM06 , On scheduling in IP10 Order gets created with Tasklist operations , one releasing the Calibration order ->Inspection Lot gets created and MIC mentioned in tasklist ..
Tasklist -->http://help.sap.com/saphelp_47x200/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm
Check Tasklist in the link
MIC -->http://help.sap.com/saphelp_40b/helpdata/en/2d/3509d8448c11d189420000e829fbbd/content.htm
regards
pushpa -
1st Gen Ipod Shuffle not updating with iTunes 7.0whatever
My 1st gen. shuffle was doing just fine updating from my iTunes playlist with the older version of iTunes. Then last night I upgraded to 7.0whatever the latest version is and now when I plug in the shuffle to update, I get the usual updating iPod message and then I get the message that it's done...but....nothing has been loaded onto the shuffle.
If I change the playlist for the shuffle to load from, I don't get any little spinning circles next to the song titles and iTunes will freeze up and I'll have to end the program from Task Manager.
I've restored the shuffle to it's original factory settings (even using the special restore program), I've uninstalled and restarted and reinstalled iTunes. I've deleted the temp directory, restarted, reinstalled iTunes. No luck.
The shuffle does work though on an older computer that has an older version of iTunes.
What's in the new version of iTunes that's not agreeing with Win XP and how do I fix it?
Thanks for your help!Well, I have that problem too. My shuffle holds about 125 songs or so, yet I've noticed there are always a good 20 or so songs that won't play, no matter how many times I load them onto the device. I have had that problem since I inherited it from a friend.
My new problem is that every time I plug my iPod into iTunes, it no longer updates the playcount for songs. In other words, if I load a song that I've heard 3 times, hear it twice during the day, and replug in my iPod at night, it used to update that song's playcount in the library to 5, but now they still read 3. It's also failing to update the "date last played" field.
I use those to help make sure that I don't load the same songs over and over again by creating a custom playlist that will comb out songs played in the last few days and have a very high play count. Since these are no longer updating, I've noticed that I keep arriving at work only to find my iPod has the same or similar songs as the day before, and dude, if I wanted that, I'd listen to the radio! -
Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?
Bump
I am also having the same issue with a lot of the softwares i have downloaded. Its unable to download the initial patch update. -
PI 7.1 - CPA Cache not updated with directory data.
Hi Gurus,
I have installed PI 7.1 and recently I refreshed my cache in partial and full mode. when I go to RWB->Cache monitoring -> Show Cache Status Table, I see following error for Central Adaptor engine.
<?xml version="1.0" encoding="ISO-8859-1"?>
<ConfirmationXML>
<CacheRefreshError>
<EngineType>
AE
</EngineType>
<EngineName>
af.sxd.mchir134
</EngineName>
<RefreshMode>
C
</RefreshMode>
<GlobalError>
<Message>
CPA Cache not updated with directory data.
</Message>
<Trace>
com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:191)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:440)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:491)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
... 11 more
</Trace>
</GlobalError>
<GlobalError>
<Message>
Confirmation handling failed.
</Message>
<Trace>
com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:162)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:462)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:603)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
... 11 more
</Trace>
</GlobalError>
</CacheRefreshError>
</ConfirmationXML>
Please suggest the solution.
Thanks,
SurendraGuys,
I have the same issue. Any help on this is appreciated!
Issue log from CPA cache refresh
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.sxd.pl1vw158</EngineName>
<RefreshMode>C</RefreshMode>
- <GlobalError>
<Message>CPA Cache not updated with directory data.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:195) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:448) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:457) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
- <GlobalError>
<Message>Confirmation handling failed.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:166) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:470) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:576) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
</CacheRefreshError>
Regards
Maybe you are looking for
-
Is it Possible to upload the output from Oracle reports To Access database
Hi All, Wish you All a Very Happy New Year. I have a query.Is it possible to upload the output from the Oracle reports to the Access database??? Any suggestions would be appreciated. TIA sg
-
Installation of weblogic 6.1 suuenly aborts without giving any error
Hi i am trying to install weblogic server 6.1 in the following configured machine:-500 Mhz 256 MB RAM 40 GB harddisk with WIN NT workstation as the operating system.The installation aborts without giving any error ?? please help..it extracts 100% and
-
What are the things that influence number/types of genius mixes?
1. How many songs are needed at least to create a new genius mix? 2. If the songs are not brought from itunes store, and are given different genres from that is assigned in the store?
-
Tecra S2: Problems with Linux Live CDs after BIOS upgrade
Hi all, a short while ago I flashed the BIOS of my Tecra S2. My current BIOS version now is 2.80. Unfortunately no I have got problems with booting Linux Live CDs like Knoppix or Kanotix. The boot process freezes, when the PCMCIA module is tried bo b
-
RSP- Fail to connect SAP Portal
Good morning... Hopefully you can help me.... I need to download new tasks from RSP task: System task to retrieve tasks, but I can't do it, cause it shows me : Fail to retrieve tasks on back-end. I don't know what does it means... I checked and had t