Inspection lot status not matching R/3 and APO

Hi,
I am getting an error in CCR report saying that "The inspection lot is in "released" status in R/3 but not in APO". Here I am giving the steps that I have followed to get this error.Please let me know why this error is coming. Can some give idea about this.
1.Planned order converted and released (not an early lot create material). 
2.Good receipt done, inspection lot created.  Rescheduled “in” released process order prior to the original start date, in the planning board.  Dates update in the order in APO successfully,  
The inspection lot shows in APO as the product is not forward processed.  (The stock will not appear until the usage decision is made.)  There is a CCR report discrepancy, error code 405.  The inspection lot is in "released" status in R/3 but not in APO.
Thanks in Advance,
Ramesh M

Hi Sajeev,
Sorry for late response.
Yes,I have made changes to process order dates after GR.
And I am populating these date changes to Insp. lot in user exit in R/3 and sending that Insp Lot to APO using the function module CIF_ADD_INSPLOT_OUT.
I can see the date changes in R/3 as well sa APO.But the release status in R/3 is intact and APO is removed.
This is causeing CCR error 405.
Let me know if you need further information.
Thanks,
Ramesh

Similar Messages

  • Inspection Lot status not getting changed to LTCA from REL for SubCon scenario

    Dear All,
    For ERSA material 01 inspection type is active with indicator Post to inspection stock only as it can be purchased. No other indicator is set.
    This material can be sent for repairing outside with DAMAGE valuation type (stock provided to Vendor with DAMAGE valuation type).
    For SubCon scenario, Purchase Order with Account Assignment Category F and Item Category L has been created.
    Once GR using MB01 with 101 movement, consumption posting takes place and as Insp type 01 is active Inspection lot is getting created with status REL CALC.
    At this time, DAMAGE stock against Vendor is getting reduced with Qty of 543 movement.
    Now when, reversal 102 with MB01 is done against Purchase Order and details are adopted with reference to 101 material document, reversal is taking place, but at the same time respective material doc's Inspection lot status is not getting changed to LTCA. It remains REL only.
    For 122 return to Vendor using MBRL also, Insp lot status is not getting changed.
    Has anybody faced such issue? Is this standard SAP?
    Kindly throw light on the process, is correct process followed?
    Regards,
    Tanuj Parikh

    Thanks.
    Thru MBST Inspection Lot status changed to LTCA.
    Why system is not cancelling thru MB01? 

  • Inspection Lot Status (CROK)not updating for Certificate Reciept

    Hi
    I want to inspect vendor materials on the basis of thier Quality certificates
    1) Config Set up:
    a) Certificate type :YA72
    Cert for each PO  item :checked
    Certificate Check reqd:  :Checked
    Enhance cert processing: Checked
    b) Control key :0005 ( Delivery release ,Certificate)
    2) Material Master (QM View)
        QM Procurement : Checked
       Control Key :0005
       Certificate Type :YA72
    3) Goods Recipt
        MIGO < Purchase Data<Cert Reciept :Yes
        Inspection lot is created
    Question : Inspection lot status is not updating for Certificate Recived or not
                      My understanding is Inspection lot status should be :CROK -Certificate Recieved                                                                               
    CTCM-Certificate Missing
    Pls correct my understanding in case i am missing something
    Thanks in advance

    Is the status in the GR document have the cert field set as 5?
    Since you set the "certificate check required" you must do an explicit check of the cert.  I included below the help screen from this indicator in SPRO.
    You should be able to review the status of your cert in transaction QC53.
    FF
    Explicit Inspection of GR Certificate Necessary
    If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
    This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
    You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
    You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
    Note
    If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
    This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents.

  • Inspection Lot Status UD ICCO SPCO ORRQ

    Hello Experts,
    Please share your thoughts on the System Status "UD ICCO SPCO ORRQ". Not sure on why the Lot getting the status ORRQ "Order record required"
    What is the Condition in which the system triggers this Status? how to complete the inspection processing once we get this status? Is it a Particular Configuration setting that expects a Process Order Record?
    Is there any setting in Production that sets the Inspection Lot status as ORRQ.
    Appreciate your quick response.
    Regards
    Raja

    hi,
    Check ur MM- QM view whether QM order is assigned or not. if QM order is assigned then process your order and confirm it and provide the settlement also against that order. Or check any other order is opened against that lot or not Like PP order or PM order which is controlled by ur QM- status profiles.
    once ur order closed technically ur inspection process completed.
    Regards

  • For the Inspection lot status is CRTD instead of REL status

    Dear Experts,
    Today I have observed strange behavoir of the system.
    For the Finished material 04 insp type, Every day we used to generate inspection lots automatically with MB31for 101 mov type.
    generated inspection lot status will be REL bydefault. Today we observed system status is CRTD.
    I have checked any material master/Inspection plan been change or not, but it was not changed.
    Please suggest how this behavior happen suddenly.
    Regards
    Don

    Dear Don,
                    Check in SPRO for inspection type configuration. Some body has changed the 'Task list usage' for Inspection type.
    If you are using '1' and if there is other one except '1' then system will create inspection lot in CRTD status.
    You need to change it manually in QA02 and assigne plan.
    Thanks and Regards
    Harriesh.

  • QM-SD: Sales Return Inspection lot status Error

    Hello Expert,
    I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
    Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
    Message no. VL171
    The inspection type is 06 (Inspection for Returns from Customer).
    The movement type is the 651.
    I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
    Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
    Please let me know what could be the reason for the error for goods issue for sales return?
    Thanks in advance.
    Pablo
    Sales Return Inspection lot status Error

    Dear Nunez
    1) 06 inspection lot gets created when you create a delivery not when you do the GR.
    2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
    3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
    1) make use of movement type 653 instead of 651
    2) activate 05 inspection in the material master. (deactivate 06)
    3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
    SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
    Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
    regards
    gajesh

  • QA13..Inspection lot status should be UD without result

    Hello Guys,
    One of our client want report  to show for the inspection lot for which UD is done, And there is no results in the Result column in Transaction:QA13,Those records need to display in the report.
    But report was developed ,we are getting only the valuated once without result and ud is done.One more requirement is that non valuated once with UD,Without result should also display in the report.
    Normally logic is like this from table :QALS with ud we are passing to QAMR table..But we are not getting the non valuated once in this table.
    Can any one explain how we need to get the non valuated once in the report.Is there any table or Function Module where we can able to look into.
    Regards
    Kumar

    Dear Kumar,
    Without result recording has many interpretations. Suppose you have 2 MICs (LENGTH and WIDTH) in a particular lot and you have to enter 5 readings for each MIC. Letu2019s have a look on following cases.
    1.     Not a single reading is entered for any of the MICs.
    2.     Readings have been recorded for all samples for only 1 or partial MICs. (All the 5 readings for LENGTH are entered and no readings are entered for WIDTH)
    3.     Partial readings are recorded for all MICs. (2 readings for LENGTH and 3 readings for WIDTH are recorded)
    4.     All the readings have been entered but none of the MICs have been valuated up to status 5. (5 readings for LENGTH and WIDTH entered but you have not valuated / closed MIC)
    The logic for report changes based on above assumptions.
    1.     If you do not get data in QAMR table, it means result recording is not all done. Not for a single reading is entered.
    2.     QAMR is for getting the information about Results Record Status. i.e. whether MIC is set for processing or MIC is closed and valuated.
    3.     I think, you must explore QASE table also. QASE if for individual MIC readings.
    4.     Test the effect of result recording in both the tables for a particular inspection lot and develop logic accordingly. But the definition of NO RR should be finalized first.
    Regards,
    Anand Rao

  • SD-QM: Sales Return Inspection lot status Error

    Hello Expert,
    I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
    Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
    Message no. VL171
    The inspection type is 06 (Inspection for Returns from Customer).
    The movement type is the 651.
    I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
    Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
    Please let me know what could be the reason for the error for goods issue for sales return?
    Thanks in advance.
    Pablo
    Sales Return Inspection lot status Error

    Dear Nunez
    1) 06 inspection lot gets created when you create a delivery not when you do the GR.
    2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
    3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
    1) make use of movement type 653 instead of 651
    2) activate 05 inspection in the material master. (deactivate 06)
    3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
    SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
    Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
    regards
    gajesh

  • Assignment of task list after the inspection lot status is released

    Hi,
    I have applied a user status with  which i am able to release the inspection lot.After that i am going to assign a task list. But it is not getting assigned.
    please help me.
    Regards
    Vivek Deshpande

    Hi,
    Key date is same. I have checked for it.
    What i am saying is , i have manually updated inspection lot status to release state by applying user status. And after that i am trying to assign inspection task list to the inspection lot.But i am unable to do so.
    Can i do this ? Please help
    Vivek Deshpande

  • Archiving Inspection Lots – Status ARBL

    Hi
    I’m busy setting ARBL status on Inspection lots using program RQRQAB00.
    These Inspection Lots are very old but all of them contain status UD or LTCA.
    The problem I’m facing is that Inspection Plan was deleted resulting in message “Inspection plan xxxxxxx does not exist” (Message no. QA318) when displaying these Inspection lots.
    Program RQRQAB00 does not issue a clear message for not activating status ARBL. Only reason I can think of is above message (QA318).
    What would be the easiest solution to activate ARBL?
    Best regards
    W

    Hi Werner,
    You can set ARBL by using SARA transaction and using object QM_CONTROL.
    Please create a  variant and schedule a job in background.
    You need to execute Pre processing job to make lots ready for archiving and put them in status blocked for archiving.
    Please check the pre-requisites for creating the inspection lot:-
    An inspection lot can only be archived if:
    ·        The inspection lot has been cancelled, or if a usage decision has been made.
    ·        If the last change to the usage decision was made before the retention duration.
    ·        All stock has been posted for a stock-relevant inspection lot.
    ·        If the inspection lot is not used in any of the following data records:
    ¡        Production order header
    ¡        Delivery note item
    ¡        Transfer requirement item without a “delivery completed” indicator.
    ¡        Quality level
    Use the following link for more information:
    http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e606e462a11d189000000e8323d3a/content.htm
    BR
    Rahul

  • Inspection lot  is not getting updated in quant

    Hi Experts,
    Need your help..
    I have posted two material doc with same material following is the consequences :
    1.we have immediate TO creation process , so now we have 2 TO's and 2 inspection lots.
    2.When i am doing UD for first inspection lot PCN does get created.
    3.Now i do TO confirmation for putaway for TR and then TO creation and confirmation for PCN and material is in bin.
    4.When i am confirming the TO(TR i.e putaway TO) ,Inspection lot  is not getting updated in the quant due to which i am not able to convert PCN to TO
    Because in quant i found previous inspection lot which is different from having in PCN document.
    So is there any solution which will update the inspection lot in quant once we confirm TO(putaway TO) ?
    Any help on this will be highly appreciated.
    Regards,
    OM

    Hi jugen,
    Thanks for you help but now i going for below development :
    Once UD is done system will take the inspection lot from from the quant and will overwrite to the
       newly created PCN
    So that during PCN to TO creation (LU04) inspection lot will remain same both in quant and PCN .
    Do you have any idea on this i mean where in QA32 tcode i have to write this logic ?
    Thank you..
    Regards,

  • TS1925 iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device.  Problem did not exist until updated IOS arrived.  Colours change of their own free will despite being corrected on both iPAD and MacBook Pro.  Any an

    iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device.  Problem did not exist until updated IOS arrived.  Colours change of their own free will despite being corrected on both iPAD and MacBook Pro.  Any answers?

    Please do not post the entire messages log as it takes up unnecessarily a lot of space.  It seems that there is a corrupt/nonfunctional file called
    [email protected]nt.plist
    Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above.  Empty the trash and restart.

  • Inspection lot status to be fetched into BW

    Hello,
    First of all; I am aware that, there are many forums/discussions with regard to fetching of Inspection lot status. I have gathered the points as well.
    Our requirement is to, to extract the Inspection lot status into BW as we are already staging the Inspection lot numbers.
    I got 2 ways to do this,
    1) There is a BAPI FM in ECC to get the Inspection lot status. "BAPI_INSPLOT_GETSTATUS".
    2) Else, we can take QALS-OBJNR & pass it to JEST to get the status numbers. And this needs to be passed to TJ02 for descriptions.
    However, I have doubts about how to extract this status into BW. (As I need to filter out the status' LTCA, CRTD, ICCO).
    1) Can we have an extractor based on the Function module & get data into BW? Is this possible, because since it is a BAPI FM; I wanted to have a clear picture on how to get it.
    2) Can I build a view on top of JEST & TJ02; And apply selection conditions of whatever is necessary & extract it into BW?
    And I don't want to stage the complete data in BW side for JEST & TJ02, as I noticed that there is uncertainly huge amount of data in JEST.
    So, any inputs on how to stage the status into BW will be very helpful for me. Please let me know, if I have missed out any documents/links regarding the same.
    Thanks again,
    Vikranth.

    Dear Madhav
    Here is my approach for this requirement
    1) Create  infoobject for each of the status you required for the inspection lot. (It can be flag indicator kind of info object
    2) Make these status navigational attribute of Inspection lot infoobject
    3) Create a generic datasource on QALS . You can use createdon and changedon so as to manage a pseudo delta. Append the datasource extract table with Z fields required to capture your Inspection lot status
    4) Write a Exit in the source system to fetch up the status field for each inspection lot from the JEST table. You can hardcode the status field for eg If Qlot has status I0002 then mark the corresponding append field with X.
    5) Map the append datasource field to the Inspection lot info object through transformation.
    Hope its clear for you
    Regards
    Gajesh

  • Inspection lot status CROK

    Hi,
    As per SAP to trigger the Work flow WS03100078, Inspection lot status needs to be CROK.  How the CROK status will be active for Inspection lot.  As per our scenario, Inspection will gets created automatically when Goods receipt against purchase order.
    Please help me
    thanks in advance
    regards
    stallin

    Hi Stallin,
    The Status CROK is updated when you confirm the certificate receipt while doing GR in Purchase Order Details in T.code MIGO and update the same as certificate received in the Tcode QC51/52 for the relevent purchase order/Inspection Lot.
    Reward if cleared and close the thread.

  • Inspection Lot status maintenance

    HI QM gurus,
    Please anyone can help me regarding printing of COA for inspection lot.
    I want to print COA before UD .I am using transaction QC21. While printing COA before UD it is giving me status error. Please guide me to maintain the status of inspection lot which does not restrict printing COA even if UD is not made.
    Thanks in advance

    Hi
    Please check your print program with the help of developer. In the program you have to exclude inspection lot status for printing.
    regards
    Srinivas

Maybe you are looking for