Inspection lot stock window missing in qa11

Dear Gurus
I want to inspect the lots that are generated while goods posting in mb31 mvt type101 after process order.For that in material master quality view I have taken inspection type 04 ,did an inspection plan (qp02).Now after doing the process order and after recieving the goods a lot is getting generated.While I am doing the usage decision I couldnot do the goods
posting from quality stock to unrestricted as Inspection lot stock window missing in qa11. What else should I do ?
Regards
Sandip Sarkar

Hi,
This specific lot does seem to me like it is manually created, there is no system status to say SPRQ or SPCO, therefore is doesnt appear to be stock relevant. You also mentioned that you can move the stock via MB1B, the system will not allow you to do this if the stock in question is being managed by an inspection lot, it will give you an error that the stock can be released via QM only.
Check the material documents linked to the inspection lot 40000000006, does it display any material documents of type 1 (material document for lot creation)? if not then your lot is definitely manually created.
Regards,
Roderick

Similar Messages

  • SAP QM - Inspection Lot Stock tab missing in QA11

    Hi,
    My scenario is raw material inspection and I executed the scenario as follows
    Step 1 : Assigned 01 inspect type to the material in QM view .
    Step 2 : Created three MIC's
    Step 3 : Created Sampling procedure
    Step 4 : Created inspection plan for material by assigning MIC's & Sampling procedure to operation.
    Step 5 : Goods receipt of 100 Qty for the material through purchase order.
    Step 6 : Created Inspection lot for material.
    Step 7 : Inspection lot selection for material and recorded the results.Then valuated the results and i reject 2 out of 3.
    Now I have to post the some qty to unrestricted use & some qty to vendor i.e return delivery. To do the same, inspection lot stock tab is missing in QA11.
    Pls suggest if I missed any thing in this process.
    Thanks in advance.
    With Regards
    Srinivas

    Hello NiTiN J,
    I will clear the confusion.
    As I described the scenario in my first post, I have created inspection lot manually (QA01), then selected the same using QA32, here I had recorded the results & UD also. When I check in MMBE for unrestricted use stock, it is still showing under QI only. Then I  identified that Inspection lot stock was missing. So, I started posting in SCN (After searching).
    Mean while in the discussions I thought that, I completed RR & UD for the material. Now if any suggestions from expects won't applicable for my query. So, after Craig's recent discussion, for the same material once again I have done the GR through purchase order and created inspection lot manually.
    Now I found inspection lot (1st) through Material Document(i.e. MB51 as suggested by Mr.Craig)
    In QA32 (2nd) inspection lot, which is created manually.
    Now I have two inspection lots for the same material and I have not recorded the results nor UD for these lots. Just created and waiting for suggestions.
    And for 1st inspection lot , I tried to do results recording using QA11 also. But system through's error as shown in screenshot.
    I think I cleared the confusion.
    Pls correct me if I am wrong or missed anything.
    With Regards
    Srinivas

  • Display mode of storage location field in inspection lot stock tab in QA11

    Hi Experts,
    I want to maintain the storage location filed in display mode in Inspection lot stock tab in Transaction QA11
    So please anyone can help me to solve this.
    Regards,
    Uttam Pal

    I'm not sure I understood the question. 
    In the UD screen on the first page the storage location is shown in display mode.  To change that you can use QAC2.
    On the stock posting screen you can change the storage location the stock is being posted if desired.  Usually most places don't have a need to change this and procedurally train their users not to. 
    If you wanted the stock posting screen to be display only, you probably have to use the screen editor to modify that which I don't think you really want to do.
    You could use automatic UD's to process your ok lots and then take away the QA11/12 from most of your users.  Then have only a few people trained to do the inspection lots requiring a manual UD.  If these people change the storage location it would be a specific choice they made, not an accident.  If this becomes a problem, they either need more training, or need to be fired.
    FF

  • QA11...Inspection Lot Stock Posting *RQEVA-SGTXT01*

    Hi All,
    In QA11, on the inspection Lot Stock tab, i m posting some qty for restriction, scrap n all...
    i want to know where the item text (RQEVA-SGTXT01)is stored for this..  on which table this is stored..???
    Thanks n Regards
    Aravindh Mani

    Thanks For ur Reply.
    U r talking about the Long Text of Usage Decisions...
    But i want to know the text typed in "To Be Posted" Under "Inspection Lot Stock" tab.
    U can Post the Quantity for
    To scrap             0.000
    To sample usage      0.000
    To blocked stock     0.000
    To new material      0.000
    To reserves          0.000
    Return Delivery      0.000..
    While posting every Qty a Small window Appears and asks for
    Reason for Mvmt
    Text   (this is the text we enter) ..... i want to know where this text is stored
    SLED/BBD ...(some date format)
    Hope u understand my requirement..
    Thanks n Regards
    Aravindh Mani
    Edited by: Aravindh Mani on Jul 17, 2009 12:16 PM

  • Inspection lot stock tab is missing

    Hi,
    In inspection lot generated for 01 insp type purchase order, the inspection lot stock tab is missing.
    Is there any control ?

    No.
    The inspection lot stock tab is not cotrolled by user in standard, but fields possible by configuration.
    If there is no inspection lot stock tab, it means the inspection lot has no stock even if insp. type '01'.
    As YOGINI mentioned already, it must be source inspection or GR with other account assignment (not stock).
    Regards
    Luke

  • No "Inspection lot stock" tab in QA11

    Hi,
    Quality lot gets created for each Goods Receipt for material with Quality management active. For particular raw material we found that for last Goods receipt the quality lot got created as usual. But in QA11 we found that there is no "Inspection lot stock" tab whereas for the second last Goods receipt for the same material there is "Inspection lot stock".
    What would be the reason?
    With Best Regards,
    Rajkumar

    Hi,
    Please refer: [No WM Posting Change created after Usage Decision for B stock].
    QM does not suppoort Stock Posting for Special Stock like B, K.
    Regards,

  • QA11 Inspection Lot Stock - debit scrap to cost center

    Hello All,
    When posting material to scrap from the Inspection Lot Stock tab in QA11, the production order is being debited for the scrap. We need to change this to debit against a cost center and not affect the production order.
    After investigating, I found the that the cost center for scrap was blank in our Plant-Specific Quality Management settings under SPRO. I updated this to include the cost center that should be charged for the scrap, but the costs are still hitting the production order and not the cost center specified.
    Are there other settings in FI/CO or Movement Types that need to be changed in order to make this work? Any ideas would be appreciated.
    Thanks!

    As I remember, a production order must be included in material document evenif you post scrap for cost center in SAP standard movement 553.
    But a cost center is debited for scrap in financial document.
    Some company use this information for cost allocation by CO module.
    Regards
    Luke

  • Want to add new field in QA32/QA11 transaction under inspection lot stock

    Dear Experts,
    I want to add new field in QA32 transaction under inspection lot stock tab or under characteristic tab.
    The reason behind is: Depends upon UD decision i want to assing customer name. So already we are having one Z Report for all the lots against this lot we have to display customer name.
    So in order to fetch customer name in the Z report we want to assing customer through F4 selection in the usage decision  screen.
    I know this is possibe for Make to order scenario, but our senario is make to stock.
    Please advice your valuable inputs.
    Regards.

    Hi Sujit,
    Can you please elaborate it,coz i'm using the same but if i place the break-point in PBO of sub screen,the break-point won't be triggered.and is there any additional step to get the data from function group? if yes, please explain me indetail.
    If possible please provide the sample code for this.
    Thanks Inadvance.
    Madan
    Edited by: Madan.ngt on Mar 3, 2011 7:16 AM
    Edited by: Madan.ngt on Mar 3, 2011 7:17 AM

  • Record usages decision- inspection lot stock

    hi gurus,
    when i am using a record usages decision screen (QA11) after putting my inspection lot number it show me only two tabs Defects and charterstics it didn't show me an inspection lot stock tab.
    Please suggest
    Regards
    Maashish

    Hi Maashish,
    I believe that your PO is for cost center.
    when you will recieve the material using MIGO for This PO, then matieal stock/Value will be posted to Consumtion Account ( Stck will not posted to store) and GR/IR for Vendor.
    In this case if Inpection lot generated,  then using QA11/QA32 you can records quality information in  Result & UD.
    In this case Transfer posting 321/105 for material will not take place.you can input quality inforamation only. 
    Hope this piece of info. will help to resolve your query..
    Cheers
    Manoj Singh

  • Inspection Lot Stock: Post to GR blocked stock

    Hi Experts,
    During the IQC process (inspection type 01), first I use the 103 to post the stock to GR Block stock (100 pcs), then after the Usage Decision, I post the stock 80 to  unrestricted use stock, 20 remain in the GR blocked stock.
    So, the 20 stay in the GR Blocked stock, and what can I deal with them? Manually create a inspection lot?

    >
    kiran kumar wrote:
    > > Dear GR blocked stock is not plant's own stock.It's a non valuated stock and there are no accounting data for GR blocked stock and it is not possible to post GR blocked stock to QI.
    >
    > Release the GR blocked stock with 105 mvt type.
    >
    > Cheers
    > KK
    Dear KK,
    The GR Blocked stock could be released to unrestricted stock by the 105 type while doing the usage decision.
    However, in this occassion, this 20 is remained in the GR blocked stock by using the "GR blocked stock" field in the Inspection Lot Stock tab of the QA14.
    Edited by: Veryhanhan on Dec 18, 2010 9:15 AM

  • Inspection lot stock tab in UD

    Dears
    When i give UD system not taking to Inspection lot stock tab for entering qty to move to unrestricted or block stock
    We manualy want to select the tab for entering qty to move to unresticted
    were the setting need to be done
    Faisal

    I think you are talking about the stock posting proposal in the selected set.
    in QS51 > selected the code group> go to codes> maintain a proposal against each code> Remove the proposal for automatic posting.
    Then it will take you through the stock posting screen after you enter the UD code.

  • QA32: Without going in Inspection lot stock screen system should not allow for UD

    Hi
    At the time of UD "without going in Inspection lot stock screen system should not allow to save the UD".
    Please suggest how to restrict.
    Regards
    Ashish

    Please go through the below link & with small changes you can fulfill  your requirement using user profile
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/601c82e3-b743-2c10-dbb6-ed4c00167157?QuickLink=index&…

  • Inspection lot stock- tab

    Hi
    While making UD, Not getting the tab named as "inspection lot stock". I have already recorded the result and the status is INSP RREC.
    Please guide
    Thanks

    Hi, Samuel,
    What is the inspection type there for your query. See there are two type of inspection types in QM
    1. Stock relevant: e.g. 01,04,08,09 etc
    2. Stock Ir-Relevant e.g. 03,14,05 etc
    So if your inspection lot belongs to these stock ir-relevant  inspection types then there will be no chance of any stock posting there.
    But if the inspection lot belongs to the inspection type from Stock relevant types then there must be the "Post to Inspection stock" indicator will be off for it in Inspection set up>QM view>Material Master.
    Regards,
    Shyamal

  • Enhancement for QA32 Inspection lot stock tabs

    Hello everybody:
       In QA32  user can do UD operation in "Characteristics" tabs and do Posting operation in "Inspection lot stock" tabs.
       phase 1: I use QEVA0010 enhancement to check UD  in "Characteristics" tabs and it works.
       phase 2: I need to check  the value of  "To unrestricted use" field in "Inspection lot stock" tabs but I can't find enhancement to do that.
       In my company, some user can use QA32 to do UD and do posting. But some of them often do posting without UD. In QA32 there is only a warning  message if you do posting without UD. So I need to check when user enter value in "Inspection lot stock" tabs some conditions must be satisfied (like UD).
      Is there any enhancement to use for my issue? thank you.
      ps. I have already tried QEVA0001. it doesn't wok.
      attachment is the picture of warning message.

    Hello,
    Here i suggest you that if you are using Exit for UD then in that only just apply one code where program first will check the QAMR/QASR etc. all result table field w.r.t inspection lot and if fields found empty means no data or RR then system wont pass UD code for UD posting.
    Or just make first MIC as required MIC and apply the code in that first MIC, if that MIC value is blank then again system wont allo UD.
    Secondly, Status profile maintenance is also an another stdn way to execute the requirement.
    Regards

  • Inspection Lot Stock Tab - To Be Posted to Unrestricted-Use Stock

    Hi Experts,
    Please guide me for:
    At the time of UD,sometimes i forget to enter the unrestricted stock quantity in inspection lot stock tab therefor quantity does not transfer into unrestricted stock and  its shown in QI.So,i want to make it mandatory.please suggest me,How to do it?
    Thanks & Regards,
    Vivek Bhojak

    Hi Vivek,
    Please activate "Stock Posting in Background" indicator in Tx QS51 for your UD code as shown below -
    This should solve your purpose and complete stock form QI will be posted to Unrestricted stock/Blocked stock. This is a safer process I always recommend.
    Otherwise, in case you still wish to so UD posting form 'Inspection Lot - Stock Tab' manually, but want to make sure that is there is no quantity selected, then the UD shouldn't be done, then you will have to make enhancement appropriately below -
    QEVA0001  Enhancement: Quantity posting for usage decision
    Thanks,
    Arijit
    Message was edited by: Arijit Banerjee

Maybe you are looking for