Inspection lot tab in qa14

dear sir
      i have faceing problem change usage dicision overview when i click inspection lot stock tab in qa14   tcode insp.stock check box are disable can you any idea how will enable this check box
becase when i make goods recpt. fields qals-ismsk update X in dicator so problem of gr cancelation
and dispaly error message You cannot cancel GR, since inspection lot is already partly posted
with regrds
vijay karnatak

hi
In QA14  will only allow to change UD without changing Stock posting(Without history).
& stock posting is completed .So you can not enale it.
For this what you can is go to QA32 -->select lots with UD...enter plant & Material.
Go to Details & change UD
In Inspection lot stock...Check the Quantity if you have partially posted.
Post the remaining Qty if any.
Save
This will allow you to cancel GR (102 mvt) as QI stock becomes Nil
While cancellation og Gr pick Qty from Unrestricted & not from QI ( Blank & not X)
Regards
Sujit

Similar Messages

  • Qual Insp:Perform partial qty REJECT in QA12 for Material GR inspection lot

    Dear All,
    Please advice me for a scenarion.
    I perform MIGO-GR - MType 103 for 5 qty, material moves to GR Blkd Stk.
    Then perform MIGO-RelBlkSTk - MType 105 for 5 qty, the material moves from GRBlkStk to QualtInspStk.
    The perform QA32 for the insp lot , and ACCEPT the 5 qty to UnrestStk.
    This acceptence movement calculates the Vendor Evaluation Quality criteria also.
    I can also REJECT the above inspection lot by QA12 : Change Usage Decision, this rejects the full 5 qty, and this also has impact in vendor evaluation quality criteria rating. Then Return to the Vendor the 5 qty.
    My query is:
    Now if i want to return PARTIAL qty to the vendor ALONG WITH VENDOR RATING RETURN CALCULATION.
    I am unable to enter partial qty in the QA12, in the 'Inspection Lot tab' in the 'To Be Posted' column.
    The whole column is non-editable, is it standard by default as non-editable?
    Am i performing the right steps for my requirement?
    Thanks in advance,
    Joy Ghosh

    Hi
    In QA12, after entering appropriate Usage decision, click on "defective quantity" tab at header, and there enter the quantity.
    Umakanth R

  • Worklist for Inspection lots QA32

    In QA32 after executing(f8) i can see the few list, in this i selected my Inspection lot and after when i click Results Tab it is giving Error  " The function you selected cannot be carried out: 1.Detailed info  2.Status display 3. Cancel.
    So can anybody give me the suggestion to come out.
    Thank You

    Hi..,
    please go to inspection lot tab in QA32 screen for the purticualr lot.., 
    & check in insp. specification task list/spec. (If, assigned: u'll found dis tab in disable mode) & go to sample tab check sampl. calculation tab((If, assigned: u'll found dis tab in disable mode)) ....
    after doing these things u'll found system status in REL.....
    Thanks,
    Kiru.S

  • Inspection lot of type 04 in "assignment" tab in Process order

    Hai,
    How do I make the Inspection Lot that was generated based on 04 Inspection Type in the Process Order - "Assignment" tab?
    Thanks in advance,
    Sonali

    Hai,
    Thanks for your reply. I could find the entries for all inspection types under Production order type (for example, PP01) in the config , but could not find entries other than 03 inspection type in PI01 order type (Process Order). Is this standard? How do i get all inspection type entries in Pi01 order type? At least, 04.
    Also, if I have both 03 and 04 active for the material, then which inspection lot the system populates in the "assignment" tab?
    Thanks
    Sonali

  • Inspection lot w/o stock tab

    Hi Guru,
    We receive job work items through MIGO and MB31.
    During MIGO , create one inspection lot  w/o inspection lot stock tab and again create one more inspection lot at the time of MB31.
    Pl. suggest any setting so that only one  inspection lot will create after MB31.
    Regards,
    Rakesh Patel

    Hi Rakesh,
    Kindly excuse me but thereu2019s a confusion to me, if you can please clarify the same.
    1.     First transaction that you are carrying out is MIGO for 101 movement I guess.
    2.     For this movement you are observing that inspection lot stock is not getting generated. The probable one of the reasons for this according to me is, goods receipt against cost center using item category K in PO.
    3.     When you inward such material against K, the stock gets consumed at the same moment you inward it. This is standard behaviour of SAP.
    My question is,
    1.     MIGO is done for say material XYZ. (the stock is not visible in MMBE if you have inwarded against cost center.)
    2.     Now MB31 is done for which material? Is it the same material or different? If you have activated 04 inspection type to the material whose production you are declaring then system will generate the lot for it in 04.
    3.     MB31 is generally used for goods receipt against production order.
    I am unable to establish the link between MIGO and MB31 here.
    Regards,
    Anand Rao

  • Inspection lot stock tab is missing

    Hi,
    In inspection lot generated for 01 insp type purchase order, the inspection lot stock tab is missing.
    Is there any control ?

    No.
    The inspection lot stock tab is not cotrolled by user in standard, but fields possible by configuration.
    If there is no inspection lot stock tab, it means the inspection lot has no stock even if insp. type '01'.
    As YOGINI mentioned already, it must be source inspection or GR with other account assignment (not stock).
    Regards
    Luke

  • Inspection lot stock tab in UD

    Dears
    When i give UD system not taking to Inspection lot stock tab for entering qty to move to unrestricted or block stock
    We manualy want to select the tab for entering qty to move to unresticted
    were the setting need to be done
    Faisal

    I think you are talking about the stock posting proposal in the selected set.
    in QS51 > selected the code group> go to codes> maintain a proposal against each code> Remove the proposal for automatic posting.
    Then it will take you through the stock posting screen after you enter the UD code.

  • Display mode of storage location field in inspection lot stock tab in QA11

    Hi Experts,
    I want to maintain the storage location filed in display mode in Inspection lot stock tab in Transaction QA11
    So please anyone can help me to solve this.
    Regards,
    Uttam Pal

    I'm not sure I understood the question. 
    In the UD screen on the first page the storage location is shown in display mode.  To change that you can use QAC2.
    On the stock posting screen you can change the storage location the stock is being posted if desired.  Usually most places don't have a need to change this and procedurally train their users not to. 
    If you wanted the stock posting screen to be display only, you probably have to use the screen editor to modify that which I don't think you really want to do.
    You could use automatic UD's to process your ok lots and then take away the QA11/12 from most of your users.  Then have only a few people trained to do the inspection lots requiring a manual UD.  If these people change the storage location it would be a specific choice they made, not an accident.  If this becomes a problem, they either need more training, or need to be fired.
    FF

  • No "Inspection lot stock" tab in QA11

    Hi,
    Quality lot gets created for each Goods Receipt for material with Quality management active. For particular raw material we found that for last Goods receipt the quality lot got created as usual. But in QA11 we found that there is no "Inspection lot stock" tab whereas for the second last Goods receipt for the same material there is "Inspection lot stock".
    What would be the reason?
    With Best Regards,
    Rajkumar

    Hi,
    Please refer: [No WM Posting Change created after Usage Decision for B stock].
    QM does not suppoort Stock Posting for Special Stock like B, K.
    Regards,

  • SAP QM - Inspection Lot Stock tab missing in QA11

    Hi,
    My scenario is raw material inspection and I executed the scenario as follows
    Step 1 : Assigned 01 inspect type to the material in QM view .
    Step 2 : Created three MIC's
    Step 3 : Created Sampling procedure
    Step 4 : Created inspection plan for material by assigning MIC's & Sampling procedure to operation.
    Step 5 : Goods receipt of 100 Qty for the material through purchase order.
    Step 6 : Created Inspection lot for material.
    Step 7 : Inspection lot selection for material and recorded the results.Then valuated the results and i reject 2 out of 3.
    Now I have to post the some qty to unrestricted use & some qty to vendor i.e return delivery. To do the same, inspection lot stock tab is missing in QA11.
    Pls suggest if I missed any thing in this process.
    Thanks in advance.
    With Regards
    Srinivas

    Hello NiTiN J,
    I will clear the confusion.
    As I described the scenario in my first post, I have created inspection lot manually (QA01), then selected the same using QA32, here I had recorded the results & UD also. When I check in MMBE for unrestricted use stock, it is still showing under QI only. Then I  identified that Inspection lot stock was missing. So, I started posting in SCN (After searching).
    Mean while in the discussions I thought that, I completed RR & UD for the material. Now if any suggestions from expects won't applicable for my query. So, after Craig's recent discussion, for the same material once again I have done the GR through purchase order and created inspection lot manually.
    Now I found inspection lot (1st) through Material Document(i.e. MB51 as suggested by Mr.Craig)
    In QA32 (2nd) inspection lot, which is created manually.
    Now I have two inspection lots for the same material and I have not recorded the results nor UD for these lots. Just created and waiting for suggestions.
    And for 1st inspection lot , I tried to do results recording using QA11 also. But system through's error as shown in screenshot.
    I think I cleared the confusion.
    Pls correct me if I am wrong or missed anything.
    With Regards
    Srinivas

  • Inspection lot with stock tab for sale return from customer.

    Dear,
    In our organization there are two scenarios,
    1)     Make to order- Strategy group -20
    2)     Make to stock- Strategy group -10
    I have maintained 05 inspection types in QM view for sale return inspection from customer.
    1) In make to order scenario Inspection lot created with inspection stock tab which is OK.
    2) But in make stock scenario no inspection lot is generated.
        Remember I donu2019t want inspection lot without inspection stock tab as per insp. type-06
    So please suggest me, what can I do for getting inspection lot with stock tab for make to stock scenario.
    Regards
    Shabbir Kureshi

    Hi
    QCC0>Quality inspection>Inspection lot creation>Inspection for shipping>Assign Inspection Lot Origin to Delivery Type-->aganist delivery type Enter 05 inspection lot origine
    Also in OMJJ check whether QM in active for mnt type 651
    Regards
    Sujit

  • Customer return , Inspection lot stock tab

    hi ,
    i am doing customer return senario , and as per requirment of client i activate inspection type 05  cause they want inspection lot stack tab in UD , but when i am doing customer return inspection lot is generated with reference to sales order and delivery number as i see in qa03 , but when doing an UD it does not contain inspection lot stok tab please suggest
    Regard
    Maashish

    Hello
    Check the movement type and make sure that you have activated the inspection for it. only 653 will create an inspction with stock posting tab
    Regards
    gajesh

  • Inspection lot stock- tab

    Hi
    While making UD, Not getting the tab named as "inspection lot stock". I have already recorded the result and the status is INSP RREC.
    Please guide
    Thanks

    Hi, Samuel,
    What is the inspection type there for your query. See there are two type of inspection types in QM
    1. Stock relevant: e.g. 01,04,08,09 etc
    2. Stock Ir-Relevant e.g. 03,14,05 etc
    So if your inspection lot belongs to these stock ir-relevant  inspection types then there will be no chance of any stock posting there.
    But if the inspection lot belongs to the inspection type from Stock relevant types then there must be the "Post to Inspection stock" indicator will be off for it in Inspection set up>QM view>Material Master.
    Regards,
    Shyamal

  • Enhancement for QA32 Inspection lot stock tabs

    Hello everybody:
       In QA32  user can do UD operation in "Characteristics" tabs and do Posting operation in "Inspection lot stock" tabs.
       phase 1: I use QEVA0010 enhancement to check UD  in "Characteristics" tabs and it works.
       phase 2: I need to check  the value of  "To unrestricted use" field in "Inspection lot stock" tabs but I can't find enhancement to do that.
       In my company, some user can use QA32 to do UD and do posting. But some of them often do posting without UD. In QA32 there is only a warning  message if you do posting without UD. So I need to check when user enter value in "Inspection lot stock" tabs some conditions must be satisfied (like UD).
      Is there any enhancement to use for my issue? thank you.
      ps. I have already tried QEVA0001. it doesn't wok.
      attachment is the picture of warning message.

    Hello,
    Here i suggest you that if you are using Exit for UD then in that only just apply one code where program first will check the QAMR/QASR etc. all result table field w.r.t inspection lot and if fields found empty means no data or RR then system wont pass UD code for UD posting.
    Or just make first MIC as required MIC and apply the code in that first MIC, if that MIC value is blank then again system wont allo UD.
    Secondly, Status profile maintenance is also an another stdn way to execute the requirement.
    Regards

  • QM-Inspection Lot Posting tab not found in QA32 -UD

    Dear All,
    I am not getting the Inspection Lot posting Tab in the QA 32 Usage Decision for the Inspection type -01.
    various steps are as follows,
    1.  I raise the PO for the material, and release it.
    2.  received the material by MIGO against that PO.
    3.  I got the lot in QA 32.
    4.  I did Result recording, without any error.
    5. In UD i accept the Lot.
    6. But Now I am not getting the Inspection Lot posting Tab at UD screen.
    How can , i Post the Lot .
    Thanks and Regards,
    Neeraj Singh

    Hi Neeraj!!!
    May be this can help you out. You please do the procedure as follows-
    1) You get Worklist for inspection lots by QA32.
    2) You plz select a single lot, go on inspection lot, inspection specification tab, press "task list specs". It will assign task list to your insp. lot.
    3) Press "back" and press "Usage Decision", accept the lot in "UD code" box and give quantity in "inspe.lot stock".
    4) Press "Save".
    Now you have cleared your lot from Quality, So you wont be able to see this lot in QA32.
    If your problem is other than this, kindly quote else....
    cheers!!!!
    kapil

Maybe you are looking for

  • Viewing contents of a document

    I receive completed forms in pdf format but sometimes the "completed" boxes are blank and the contents are only shown when I click on the box - how can I get Adobe Reader XI to show the entire content of the form?

  • Poweshell script for adding the computer object in to SCOM 2012 group.

    Hi Team, Is there any way to add the computer object ( csv file) to SCOM 2012 manually created  group.

  • Is oracle 8i is Sucessfully run on Windows Xp NTFS Based ??

    i just want to know that will , oracle 8i run sucessfully on windows xp (NTFS), an AMD based System. not that C.P.U d'osnt have any LAN Card or Network connection. that one is only a home user computer .if is it possiable to run 8i on this, let me te

  • EXS24 is so slow if loading an instrument i never used before

    EXS24 is so slow if loading an instrument i never used before. But after the 1st tough time, loading of this patch can be very fast later even after restarting system thousands of times:-) I did not change and use any personal setting of ESX24 data f

  • Error in Extending the VO

    I have copied all the files from ont directory and I created xxxx\oracle\apps\ont\ placed all the files here. I unchecked the Check XML Syntax on Make. When I rebuild the project, I am getting alot of errors. Error: xxxx.oracle.apps.ont.custservice.s