Inspection lot with 01 origin for stock transfer (Intra company STO)?

Hi Sap Gurus,
As per standard SAP configuration for 101 movement type, 08 is the inspection type used for stock transfers (Intra company STO). But, there is a requirement from business to use 01 for Intra STO. Is it possible to get an inspection lot with 01 origin while GR to the delivery created for Intra STO ( Stock transfer B/n plants from same company code)?.
Thanks in advance
Venkat V

Hi All,
Thanks for your replies..
Its STO Purchase order between two plants under same company code. System triggers movement type 101 with movement indicator B - Goods movement for Purchase order and Receipt indicator X - Stock transport order. Here system expects inspection lot origin 08 as per standard SAP configuration(OMJJ).
I just wanted to check, is it possible to get inspection lot from 01 origin for this type of stock transfers. If anyone who worked on this area, please share your inputs.
Thanks in advance
Venkat V

Similar Messages

Stock Transfer Intra-Company

I have little confusion..I was trying to create stock transfer order(UB) and I was able to create it without creating the plant as Vendor .I just put the plant number in supplying plant field and system was able to create STO.Is this right?
Other question I have ..If I have to use SD part for STO what steps I should carry out after the STO creation.
Thanks
Kawal

Dear,
You are right, even you don't do any special configuration STO flow with document type UB works.
STO flow between two plants is having following steps.
1. Stock transport order in the receiving plant ( ME21N) :- Give supplying plant.
2. Delivery in the issuing plant ( VL10B)
3. Goods receipt in the receiving plant (MIGO_GR)
You please also go through following link.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
Hope this will help you.
Deepak.

Proforma Invoice in Stock transfer Intra company

Hi Gurus,
I am trying to make Proforma Invoice in STO Intra company. But it is giving the errror "Not relevant for billing". Actually i want to create a excise Invoice from this Pro forma Invoice. I have also maintained NLN item category in Copy control between NL to F8. but still the invoice is not created. Can anybodu plz tell me where i am missing the configuration?

Hello,
I presume, your configuration settings are correct. check what billing type you assigned to NLN item category and what billing type you are selecting during VF01
Regards
Anil

Single Step STO Mvt 301 for Stock transfer beteen Company code during Cutover

Dear All ;
I am Planning to use Movement type 301 ie single step STO Beteeen two different company code at the time of Cutover .Is it a feasible solution ?
I am Currently handling a Org Restructuring Project ,Where one company code will be broken into five different company code ( Including Old Company code ) ,and old som of the stock of old company code needed to be shifted to new 4 company codes .
In this Context i am thinking to use 301 ,will it be a feasible solution ?
I have tested in IDES ,It is working ,But I need to be confirm as there is hudge data to be migrated .
Best Regadsl;
Joydeep Mukherjee

Hi Joy,
You can do this in one step as you already have tested in IDES, but depends on your business requirement that in which way you want to handle your stock transfers either by using one step or two steps movement types or by using stock transport orders. Using STO is a good approach for stock transfers between two company codes.
See the below link:
http://help.sap.com/saphelp_45b/helpdata/en/a5/63391843a211d189410000e829fbbd/content.htm
regards,
anoop Singh

Not possible to determine shipping data for material in intra company STO

Hi,
just trying to set up a STO material movement between two plants belonging to same company code,sto customization is done,i have chosen raw material whose stock got maintained in both plants........when trying to post it gives an error message ....NOT POSSIBLE TO DETERMINE SHIPPING DATA FOR THE MATERIAL...COULD SOME ONE HELP ME...

SPRO->Material Management->purchasing->scheduling Agreement->Setup Stock transport scheduling Agreement->Define shipping data for plants.
Select the particular plant and click on details there also you have to maintain the same customer that you have maintained in J1ID.
Then it will allow to create Stock transport order.
I did the same thing it was working for me.
Edited by: Vanitha Krishnamurthy on Jul 27, 2010 12:07 PM

Cancel inspection lot of origin 09 type

Hi,
i want to cancel inspection lot 09 type and inpection lot status is CRTD CHCR SPRQ.
So pl help me how i cancel this lot .
Regards,
Prakash

Dear Prakash,
Inspection lot with origin 9 is the lot generated for Recurring inspection. You define in Material master the 'inspection interval' in days, so once that many days are passed the system will automatically post the stock of that batch from unrestricted to quality.
Once the lot is generated you should inspect that lot and post stock to unrestricted.
If you don't want lots of 09 origin to generate do following :
1) Remove 09 inspection type from material master.
2) Remove the Inspection interval from material master
3) Remove the materials from QA07 (deadline monitoring if batches)
This will ensure that no lots from 09 origin are generated.
Best Regards,
Shekhar

Inspection lot with stock tab for sale return from customer.

Dear,
In our organization there are two scenarios,
1)     Make to order- Strategy group -20
2)     Make to stock- Strategy group -10
I have maintained 05 inspection types in QM view for sale return inspection from customer.
1) In make to order scenario Inspection lot created with inspection stock tab which is OK.
2) But in make stock scenario no inspection lot is generated.
    Remember I donu2019t want inspection lot without inspection stock tab as per insp. type-06
So please suggest me, what can I do for getting inspection lot with stock tab for make to stock scenario.
Regards
Shabbir Kureshi

Hi
QCC0>Quality inspection>Inspection lot creation>Inspection for shipping>Assign Inspection Lot Origin to Delivery Type-->aganist delivery type Enter 05 inspection lot origine
Also in OMJJ check whether QM in active for mnt type 651
Regards
Sujit

No Quality Inspection for Stock Transfer

Hi,
There is a scenario now in which a material is activated for quality inspection. This same material is also used for Stock transfer from other plant with same company.
So if material if received using STO, how can I deactivate Quality Inspection and just transfer to unrestricted use.
Thank You,
Raymond

Hi
check user exit.
QAAT0001 Inspection type determination different from variant 01
You can install enhancement QAAT0001 ,the function modules contained in this enhancement are called up in the
programs in which you can access the master inspection type if necessary.
The inspection lot is then created with the inspection type that was
determined using the enhancement.
logic will be for STO it will consider Z mvt type of origin 08 ,for STO material activate a Z mvt type & do not tick on Post to inspection.
For normal stock trnsfer system will create 08.
I hope this will add some value
Regards'
Sujit

Inspection Lot with Zero stock posting qty

Dear QM Consultants,
We have come across following scenario,
1.     Repetitive manufacturing
2.     Material has inspection type 04 and Z04. Preferred inspection type is not ticked. Z04 inspection type has been assigned to inspection lot 04.
3.     Production GR done by 131 movement
4.     Inspection lot generated with reference to 131 movement type. Lot for inspection type 04 is created.
5.     Inspection lot qty in QA32 it shows correctly as that of GR qty.
6.     But when we click on UD, in stock posting tab, qty to be posted it shows as ZERO. So no qty is available for stock posting.
Has anybody came across such scenario? Is this any bug? Any SAP note for this?
Best Regards,
Anand Rao

Dear Sujit, Thanks for so prompt reply,
Basically this is a complex case,
1.     See we have set Posting Proposal in Usage Decision as u2018To unrestricted useu2019 in selected sets for usage decision. That means we need not every time go to stock posting tab. The moment we select ACC UD code it automatically posts the stock to unrestricted use.
2.     Now, what has happed, by 131 movement declaration, backflush happened with 261 movement for child parts.
3.     Inspection lots with inspection type 04 were created. (Here we did not note whether the stock was posted in quality inspection or in unrestricted use)
4.     Now the requirement is to cancel 131 movement document. Kindly note UD were not given up to this moment.
5.     Now through MFBF, user did document specific reversal. As a result of which and as per my knowledge 132 movement should happen and 262 should also happen. At the same time inspection lot status should be set to LTCA. But in actual case 132 movement happened and 262 did not. Surprisingly inspection lot did not set to LTCA status. It remained in REL mode only.
6.     After this document specific reversal, user gave UD to these inspection lots without noticing where the stock was lying.(in unrestricted or in quality inspection). So the lot status set to UD   ICCO SPCO STUP after giving usage decision.
7.     Now while doing reverse engineering that why 262 movement did not happen, we came to know that no 321 movement happened for the inspection lots which were generated with reference 131 movement document
8.     Also, qty to be posted it shows ZERO as explained in my earlier post.
9.     When we display 132 movement document through MIGO, in where tab it shows stock type as Quality inspection. That means stock was lifted from QI for 132 movement.
In short it cannot be predicted where the stock was actually posted whether in QI or in unrestricted use. But yes the post to inspection stock tick has been ticked in material master.
Can you help further in this regard?
Best Regards
Anand Rao

Want to do mass processing for inspection lots with status SPRQ

Hello,
My company using early lot creation for 04 inspection type. We have thousands of inspection lots with status "UD ICCO SPRQ PRII PRSI STUP". Now due to SPRQ status, system is not closing process orders associated with thousands of inspection lots.
Is there any transaction where I can do mass processing of inspection lots to change the status "SPCO" from "SPRQ"?
Thanks
Bhavesh

Dear Bhavesh
You may have to modify the standard program to do so. Modify this program RQEVAI30.
This can help you
Regards
gajesh

Cancellation of Inspection Lot with Status LOLK

Lot with Origin 08 has the status "ICCO SPCO BRRQ LOLK". Stock has been scrapped through movement type 713 from the quality inspection area but the lot is still is displaying in QA32.
When we are trying to remove the status LOLK through QA12 system is not allowing to enter into screen and giving message "This function cannot be carried out."
How to cancel or remove this lot?

Hi,
status LOLK means Lot locked for batch record
So go to QA32 and select the relevant inspection lot and go to the Usage decision tab.
Click the menu bar " Usage Decision" and go to
Functions-block for batch record---deselect
Then save the lot and come again to functions--- cancel the lot.
By doing this you can cancel your lot
How to cancel or remove this lot?
Hope your problem will sorted out
Give a try and confirm
Regards
Hari

Creation of Recurring Inspection Lots with Serial numbers

Hello,
We have the following scenario at our client :
MIGO_GR is used to create GR for materials with Serial number requirement. The serial numbers can be generated automatically or manually entered on the screen. At this point of time, the Shelf Life expiry date & Next Inspection date are calculated based upon the Production date. The Batch gets created with Next Inspection date, Inspection Lots are created and the Serial numbers are assigned by the system. The stock moves into QI.
The stock is moved from Quality restricted to Unrestricted stock via QA11. The serial numbers are handled by the system or can be managed on screen.
Transaction QA07 (Deadline Monitoring of Batches) is used to create Recurring Inspection. QA07 gives error message IO304 that "Only 0 serial numbers entered instead of 1". The problem is that system doesn't pick up the corresponding serial numbers.
OSS # 497845 mentions that Transaction QA07 can not handle serial number. The serial numbers are very critical to the business process.
Has anyone come across this situation before ? Please suggest solution or workaround. I tried using BAdI "INSPECTIONLOT_UPDATE" & was able to create Inspection Lots with serial number assignment, also manipulated Batch to change the Next Inspection date. The problem is Material Movement (322) Document does NOT get created.
Also tried implementing BAdI as per OSS # 608830 but doesn't give desired results.
Any help is greatly appreciated.
Best Regards,
Homiar Kalwachwala.

Hello all,
Just wanted to bring this on top to be noticed.
Would appreciate any help, suggestions...
Regards,
Homiar.

Manual inspection lot with out specification

Hi gurus,
can anybody give me an example for Manual inspection lot with out specification?
regards,
sbabu

Hi,
Actually it is not useful in manual inspection lot because manual inspection lot used to check your quality of material at any movement.
Means for example your raw material is in store department but some time you suspect something about quality & you take decision to check quality of material that time it can be used. So in this case result record is mandatary,
Because your intention to create lot to checked material so not use ful without specification .
Also not any posting happening through this lot.just to check the material at any instance.
For any further clarification revert me back.
Some time client want to create lot but do not want to take results for that just they are interested in giving
UD & stock posting in that case you can remove tick task list required .This requirement mostly demanded for certain Engg items they do not want go material directly to unrestricted. it will go through UD.
But manual inspection lot I do not think it much useful.
Regards
SANIL

MRRL - Automatic posting for stock transfer PO

I want to use MRRL for stock transfer.
Please let me know the confirm.
My objective is to reduce the manual IV for stock tranfers.
Regards
Pranav

then why do you need invoice for intra company stock transfer ( Stock transfer between two plants with in same company code).
Invoice is not required in this process.Invoice applicable only Intercompany sto .

Pending Quantity in PO for stock transfer

Dear All,
I want to know the pending order quantity for stock transfer orders (plant to plant),I have tried
ME80FN,ME2L Etc. but all report are showing the pending quantity only after MIGO done by
the receiving plant.
Our requirement is like this that one plant created one stock transfer order to one
plant and he want to know the actual pending order quantity as on date considering
by deducting stock in transit (5B5T) (i.e. PO quantity 100 pcs - quantity delivered 50 pcs then actual
pending quantity should be 50 pcs but in mentioned report it is showing 100 pcs pending).
Please note in our case in every PO more than 800 line items are there.
Can any one inform me about standard report or any table where net pending quantity are getting
stored.I have checked table EKBE,MARD,MARC.
Regards,
SP Shukla.

Hi,
In mb5b u give movement type & check
Generally i do not think there is a std report, this we also faced, we developed a report with the help of ABAPer
Pandari

Inspection lot with 01 origin for stock transfer (Intra company STO)?

Similar Messages

Maybe you are looking for