Inspection plan 2985 has been deleted error

Hi,
We ahve created a new material and gr made for that materail as it is coming frist time we have created a inspection plan with QP01, but when i done QA02, chnage inspection lot to calculate the sample quantity system is giving error that Inspection plan 2985 has been deleted , and we are not getting the sample quantity and also the material is not coming in QE51 to update .
regards,
zafar

Hi Zafar,
Make sure you have assigned the material to a valid inspection plan in transaction QP02, once the material is assigned to the plan then go to QA02 under the inspection spefication tab click the task list / spec button, this will then automatically assign the inspection plan to the inspection lot. If you have assigned the material to multiple plans for the same usage it will give you a pop up selection of which plan to choose. Once the plan is assigned you will be able to see the inspection lot in transaction QE51N.
Regards,
Roderick

Similar Messages

Inspection plan has been deleted- GR from production

Hi,
We are doing a goods receipt inspection from production - origin 04.
The inspection plan group counter that was assigned to the inspection lot has been deleted.
is there a way to assign another valid inspection plan group counter to the inspection lot so that we can do GR with 04 origin.
Thanks in advance,
Manohar

Hi
is there a way to assign another valid inspection plan group counter to the inspection lot so that we can do GR with 04 origin.
Even if the Inspection plan is deleted...you can create a back dated inspection plan with another group counter.system automatically propose next group counter.
Now lets say that your lot is already created & you want to assign the new inspection plan..
then go to QA02
click on reset sample
save.
now again go to QA02--->Inspection specification >click on Inspection specification>click on sample.
save.
check the status as REL for inspection lot.
Now take UD
I hope you understood
Regards
Sujit

Error : Period dimension 'Period' is missing a Base Time Period member 'Jun' that has been deleted since the last deployment. Base Time Period members cannot be deleted once the dimension is deployed

HI,
I am using V11.1.2.2 Hyperion Planning. I am currently getting an error:
Error : Period dimension 'Period' is missing a Base Time Period member 'Jun' that has been deleted since the last deployment. Base Time Period members cannot be deleted once the dimension is deployed
This is what i got when i tried to add alternate hierarchy to my shared dimension. I tried to delete it and it messed up.
NOw it wont deploy my application.
Can any one suggest.
Thanks in advance
Cheers,
XXX

EPMA!!!!! EPMA!!!!
I'm playing around with it to write a blog post and it is crazy. Only possible workaround (till now i'm not able to figure out a solution to it) is to copy the application and deploy it as a new one. Take copy of all objects (forms, tasklist etc). Delete the corrupted application and rename the new one to old.
Regards
Celvin
http://www.orahyplabs.com

Error Record has been deleted. Your request cannot be processed

Hi Team,
We are planning to integrate apps scema with our separate schema by calling oe_order_pub.process_order API,
While calling this API we are getting error like creation process :"Record has been deleted. Your request cannot be processed."
As pe my observation i found below vaariable causes the issue.
l_line_tbl (i).operation := OE_GLOBALS.G_OPR_CREATE;
Please help.

I have passed the Lock control = 1 at the header level. Still getting the same error.
Record has been deleted. Your request cannot be processed.
--Prasanth

Exchange Provisioning - Error (User Has been deleted from AD)

Hello Experts,
User has been provisioned to AD successfully and I verified it manually by logging into AD server. But when I provision Exchange to User "Create Mailbox" task failed with the following error message "User Has been Deleted from AD".
I am wondering what causing this issue? Can u assist me?
Thanks & Regards
INIYA

Exchange provisioning task "Get Object GUID" returns "Value not set" . Is this the reason for the above error?
Seems like AD provisioning process is creating user in AD but not setting Object GUID. Any idea how to resolve this?

I can't start CS6 I get this error message "Could not initialize Photoshop because the preferences file was invalid (it has been deleted)." What do I do now??

When I try to start CS6 I get this error message "Could not initialize Photoshop because the preferences file was invalid (it has been deleted)." What do I do now??

Please refer:
FAQ: How do I reset my preferences?
Regards,
Ashutosh

Error in maintainance plan : Exception has been thrown by the target of an invocation. (mscorlib)

Hi,
I am getting below error while trying to create new maintainance plan in SQL 2008 R2, by right click on "New Maintainance plan"...could you please help on this...
I have tried to register DTS.dll but after that also error is coming...
===================================
Exception has been thrown by the target of an invocation. (mscorlib)
Program Location:
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.GetExistingPackageNames(String serverName, String userName, SqlSecureString securePassword)
   at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.GetNewPackageName(String serverName, String userName, SqlSecureString securePassword)
   at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.Invoke()
===================================
No description found
Program Location:
   at Microsoft.SqlServer.Dts.Runtime.Application.GetPackageInfos(String strFolder, String serverName, String serverUserName, String serverPassword)

Hi,
According to the description, I understand that you receives the below error message when trying to create Maintenance Plans:
"Exception has been thrown by the target of an invocation. (mscorlib)
Have you registered MsDtsSrvrUtil.dll and SqlTaskConnections.dll as well? If no, I suggest you register “DTS.dll”, “MsDtsSrvrUtil.dll”, “SqlTaskConnections.dll” using register32.exe.
If the version of an instance of SQL Server 2008 R2 is earlier than SQL Server 2008 R2 SP2, as Shanky suggested, you may obtain the latest service pack for Microsoft SQL Server. For more information, click the following article number to view the article
in the Microsoft Knowledge Base:
http://support.microsoft.com/kb/2527041/en-us
In addition, here is a similar thread. Please refer the solution by DevB:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/ca19a00a-3782-48e9-9ccd-44d4680359c0/maintanance-plan?forum=sqltools
Thanks.
Tracy Cai
TechNet Community Support

Smartform run-time error 5825: object has been deleted

While modifying a smartform, I keep on getting run-time error 5825 object has been deleted.
(microsoft visual basic)
I have already restarted sap gui, even deleted my smartform and started another.. it keeps on haunting me.
Anybody an idea how to get rid of this error???

Hi,
Do you use MS Word 2007 as the ediitor for sapscript and smartforms? In this case you need the support packs specified in SAP note #1115157. Make sure you have the satest SAPGUI patch also.
You can switch to the old graphical editor via transaction I18N -> I18N Customizing -> MS Word as Editor.
regards,
Aidan

When I try to open CS5, I get an error message that it cannot initialize the preferences file because it has been deleted. How do I fix this?

The last time I used CS5, I changed the scratch disc in the preferences file; now Photoshop will not open saying that the preferences file has been deleted. I didn't delete the file. How do I fix this?

As you open Photoshop, hold Control + Alt + Shift (or Command + Option + Shift on a Mac). That will trigger a preferences reset dialog, Photoshop will go back to default state when you do that.

I cannot sign into App Store. "unknown error" and then "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"

I cannot sign in to the App Store.
I changed countries a few months ago and updated all my account info and everything was working fine, until recently, while trying to upgrade my softwear to Mavericks, which I cannot do. My apple Username and password work fine on iTunes and on my iPhone. I can also access all my account info when I sign in through the website. It just will not work for the App Store on my Mac Pro.
When I click "Welcome" under Quick Links it asks me to sign in. I sign in with my Apple Username and Password and then it DOES NOTHING
When I click on "Free Upgrade" and then "Install" on the mavericks software, it asks me to sign in again. This time it says "unknown error" and then it says "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"
I''m completely blocked. I cannot procede without being able to update my software.
Please help me.
Rhea

You could try this.
Back up all data.Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot and test. If there's no change, restore the item you deleted from a backup, overwriting the one that may have been created in its place. Otherwise, you may need to recreate some of your settings in the Network preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Credit for this solution to ASC member luis.pinhor.

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

There has been an error creating the personal site. User cannot be found

Few of my Domain Users are able to create MySite and few of them are not, though they are having same permission.
There has been an error creating the personal site. Contact your site administrator for more information.
Event Viewer is showing :
My Site creation failure for user 'DOMAIN\username' for site url 'http://10.31.2.9:46744/personal/username'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create
the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
Below are the DLL versions of my installation.
Microsoft.SharePoint.Portal.dll : 12.0.6420.1000
Microsoft.SharePoint.Portal.dll : 12.0.6422.1000
Please suggest.
Thanks in Advance

Please note for future reference that you should only ever post any one question ONCE.
Posting it twice means that there are parallel threads and peoples time is wasted.
Here one copy was posted as a new thread and the other copy was posted as a reply in another thread *which had already been closed by the Original Poster years earlier*.
You should not in any case add new questions to existing threads and especially not to old, closed, threads.
I have therefore deleted that other copy of this post. This is now the only place that people will see your question and the answers to it (which is how it should be).
Moderator pre-2010 forums
SP 2010 "FAQ" (mainly useful links):
http://wssv4faq.mindsharp.com/default.aspx
WSS3/MOSS FAQ (FAQ and Links) http://wssv3faq.mindsharp.com/default.aspx
Both also have links to extensive book lists and to (free) on-line chapters

Tax code C0 for country IN has been deleted or incorrectly changed

Dear All
While making incoming payment in F-06 am getting an error (Tax code C0 for country IN has been deleted or incorrectly changed) Plz give me the solution.
regds
raj

Just check on OBCL.
Thanks
Kalyan

"Tax code AD for country IN has been deleted or incorrectly changed

While doing the cash application process in the customer account, I am not able to clear invoice ,as it has discount value. We are getting an error message as "Tax code AD for country IN has been deleted or incorrectly changed" and we are not able to post the transaction.
Thanks
Ram

Hi
Check the tax code in FTXP if that has been deleted. This error may come if the tax code previously existing & used in document entry is deleted
and also check this
FTXP -> Enter country XX -> enter tax code -> click
properties -> set the reporting country to
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jul 29, 2009 10:03 AM

Weblogic 8.1 - Bean has been deleted .

Hi ,
I am using weblogic 8.1 for my adapter.This particular adapter supports both HTTP and HTTPS requests.
In the case of HTTPS scenarion when ever i try to post a request, i get the follwing error.
I am not sure whether it is in my code or any configuration with weblogic, because the same code works fine with the JBOSS app server.
Can any one help me on this ...
the error tells that the bean is being deleted.
Thanks in advance.
The error is ...
javax.ejb.NoSuchObjectLocalException: Bean has been deleted.: java.rmi.NoSuchObjectException: Bean has been deleted.
     at weblogic.ejb20.swap.DiskSwap.read(DiskSwap.java:189)
     at weblogic.ejb20.manager.StatefulSessionManager.getBean(StatefulSessionManager.java:332)
     at weblogic.ejb20.manager.StatefulSessionManager.preInvoke(StatefulSessionManager.java:402)
     at weblogic.ejb20.manager.StatefulSessionManager.remove(StatefulSessionManager.java:944)
     at weblogic.ejb20.internal.StatefulEJBLocalObject.remove(StatefulEJBLocalObject.java:91)
     at com.gxs.ace.adapter.http.ejb.OutboundFacade_rm31gc_ELOImpl.remove(OutboundFacade_rm31gc_ELOImpl.java:457)
     at com.gxs.ace.adapter.http.enterprise.ejb.EnterpriseOutboundBean.runOutboundProcessing(EnterpriseOutboundBean.java:252)
     at com.gxs.ace.adapter.http.enterprise.ejb.EnterpriseOutbound_namfym_EOImpl.runOutboundProcessing(EnterpriseOutbound_namfym_EOImpl.java:46)
     at com.gxs.ace.adapter.http.enterprise.ejb.EnterpriseOutbound_namfym_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:90)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
     at weblogic.ejb20.internal.EJBRuntimeUtils.throwEJBException(EJBRuntimeUtils.java:145)
     at weblogic.ejb20.internal.BaseEJBLocalHome.handleSystemException(BaseEJBLocalHome.java:222)
     at weblogic.ejb20.internal.StatefulEJBLocalObject.remove(StatefulEJBLocalObject.java:97)
     at com.gxs.ace.adapter.http.ejb.OutboundFacade_rm31gc_ELOImpl.remove(OutboundFacade_rm31gc_ELOImpl.java:457)
     at com.gxs.ace.adapter.http.enterprise.ejb.EnterpriseOutboundBean.runOutboundProcessing(EnterpriseOutboundBean.java:252)
     at com.gxs.ace.adapter.http.enterprise.ejb.EnterpriseOutbound_namfym_EOImpl.runOutboundProcessing(EnterpriseOutbound_namfym_EOImpl.java:46)
     at com.gxs.ace.adapter.http.enterprise.ejb.EnterpriseOutbound_namfym_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:90)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

Which version of WLS?
Are you getting the remote reference from ejb handle?
If so, how much time the handle is persisted to file or db befopre bean is
created out of it? Is it more than 5 minutes?
The object will be DGC'ed if it dont receive the renew lease on the object.
This could happen if the handle is created out of the bean and if the handle
is not used till DGC time-out, then if the bean is created out of that
handle you will see this kind of exception.
This will happen if the bean is created from the handle on a different JVM.
If the bean is created from the handle in the same jvm (say in a JSP) then
you dont see this problem.
Possible Solutions:
1) Increase the DGC timeout. Add DGCIdlePeriodsUntilTimeout=20 in the
config.xml to the Server tag.
The default is 5. This means 5 heartbeat periods ie. 5*60secs.
2) Review the application code. See if there is a chance to keep the lease
messages flowing.
This can be done, if you created the handle from the bean in leass than 5
mts (DGC period) and create bean out of it and by calling a business method
on it from a different JVM.
You mentioned that, you got the remote reference. Some times, the remote
reference is locally created in the client for SFSB's, if they are created
from a handle. Handle knows how to create them. It will not ask the server
for the remote. Hence you see this exception when you call a remote method
on this remoteReference.
If you still face problems, contact support for more help.
Cheers,
..maruthi
"gvs srinivas" <[email protected]> wrote in message
news:3d3a8bfa$[email protected]..
i am getting a nosuchobject found exception--bean has been deleted.i amable to get the remote reference of a stateful session bean,when i try to
call the method on the remote reference it is giving the exception

Inspection plan 2985 has been deleted error

Similar Messages

Maybe you are looking for