Inspection plan deletion

Gurus,
Is it possible to do mass deletion of  Inspection plans.

Hi,
You can use CWBQM to delete multiple material number assignments at once. QSR6 delete the entire task list . Beware that the deletion of the material assignment doesn't completely delete from the tables. You will need to look at OSS note 60386.
As you want to use the same group number in future, system will allow you but the counter number will be the next available.
Cheers,
Tushar

Similar Messages

  • Inspection plan deleted

    Hi,
    My users have just "deleted" certain inspection plans. They marked the plan with the deletion flag. How can I take the deletion flag out of it.
    Please this is very urgent!!!!!!
    Charline

    hi
    if you have put the deletion flag it is possible reove it.just go to inspection plan in change mode (QP02),press the header details then remove the deletion flag indicator.
    if you have run the QCR6 without archiving then it is not possible to revoke it
    kindly refer the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/ce/fa9066f0bc11d283d60000e829fdb3/content.htm
    regards
    thyagarajan

  • How to block deletion of Inspection Plan

    Dear Experts
    Accicendatally, our users are deleting the Inspection Plan,
    Is there any authorisation object to make Restriction on this,Transaction is QP02.
    Regards
    Sandeep patil

    Hi Sandeep,
    As you said User's are deleting inspection plans. They must be putting it for deletions by clicking on deletion flags.
    If you want to restrict this then you have to get help of security team. They will find role for this transaction -
    > then they will find out the objects matanined in this role -
    > this will display all the activities in that object -
    > then they can cancel deletion activity from object list.
    Then when User will access QP02 then this checkbox will appear grey. Then they will not be able to delete inspection plan.
    Hope this resolves your issue, reward points if helpful.
    Regards,
    Avinash.

  • QM Inspection Plans migration - How to migrate deleted plans.

    Hello All,
    I'm currently working on a migration project from 4.7 to 6.0.
    Our customer wants to migrate all QM inspection plans, including those are marked as deleted (PLKO-LOEKZ = 'X').
    I'm using BAPI_INSPECTIONPLAN_CREATE. The BAPI works fine when the inspection plan which is being loaded is not marked as deleted. But when I try to upload another one which is mark as deleted (BAPI1191_TSK_C-DEL_IND = 'X'), I get the following error from BAPIRETURN: "The object does not exist for scheduled deletion time" (Message class CPCC_DT, number 214).
    Does anybody knows if it is possible to load inspection plans marked as deleted using this BAPI?

    C N,
    The principal Idea is to migrate either
    - the original amounts, the installment plan and last the latest payments (you migrate payment history)
    - or to migrate the still open amount as one or more open items and subsequently an installment based on that amount.
    Kind regards,
    Fritz

  • QM- delete inspection Plan

    Hi Guys,
    i have an issue regarding master data and inspection plan.
    i need to change the base unit of measure on a material.
    when i tried the system gave me this message:
    The base unit of measure cannot be changed.
    The reasons for this are:
    Routings already exist that are assigned to the material.
    Type Group    GrC Plnt
    Q    235723   1   USNA
    so i have checked table PLKO and found my material.
    i have seen that an Inspection Plan has been created, so i deleted the IP with QP02. went to MM02 tried to change the Bum but same error.
    run tcode QSR6 but i am not able to delete this I.Plan. am i missing something?
    can you please help?
    thanks
    C.

    BTW: for your process you don't need to delete the inspection plan.  All you need to do is go to the material assignment screen at the header level of the insp. plan and delete the assignment of the material to the plan.  Then, if you wanted to, after changing the BUOM in the material, you could use QP02 to change the UOM used in the inspection plan, and the reassign the material back to it.  Save you from having to recreate the plan.
    FF

  • How to delete several inspection plan

    Hi every body,
    I need to delete 4000 inspections plan, but I don't know how I can do it?
    Somedody could help me?
    I try tcode QSR6, but this tcode delete just one inspection plan!!
    tHANK for any help.
    Cdt
    Kari

    Thanks for you tcode but do you try it?
    I don't know how to use it?
    How I can to delet inspection plan?
    Coul you help me, please?

  • Inspection plan 2985 has been deleted error

    Hi,
    We ahve created a new material and gr made for that materail as it is coming frist time we have created a inspection plan with QP01, but when i done  QA02, chnage inspection lot to calculate the sample quantity system is giving error that   Inspection plan 2985 has been deleted , and we are not getting the sample quantity and also the material is not coming in QE51 to update .
    regards,
    zafar

    Hi Zafar,
    Make sure you have assigned the material to a valid inspection plan in transaction QP02, once the material is assigned to the plan then go to QA02 under the inspection spefication tab click the task list / spec button, this will then automatically assign the inspection plan to the inspection lot. If you have assigned the material to multiple plans for the same usage it will give you a pop up selection of which plan to choose. Once the plan is assigned you will be able to see the inspection lot in transaction QE51N.
    Regards,
    Roderick

  • Recall deleted Inspection plan

    Dear experts,
    User accidentally deleted inspection plan header in QP02. Please advise how to recall the deleted inspeciton plan.
    Thank you very much.
    Regards,
    Wong

    Hi,
    You can implement note 332626, this will restore the Q plan header for you.
    Regards,
    Roderick

  • Inspection plan has been deleted- GR from production

    Hi,
    We are doing a goods receipt inspection from production - origin 04.
    The inspection plan group counter that was assigned to the inspection lot has been deleted.
    is there a way to assign another valid inspection plan group counter to the inspection lot so that we can do GR with 04 origin.
    Thanks in advance,
    Manohar

    Hi
    is there a way to assign another valid inspection plan group counter to the inspection lot so that we can do GR with 04 origin.
    Even if the Inspection plan is deleted...you can create a back dated inspection plan with another group counter.system automatically propose next group counter.
    Now lets say that your lot is already created & you want to assign the new inspection plan..
    then go to QA02
    click on reset sample
    save.
    now again go to QA02--->Inspection specification  >click on Inspection specification>click on sample.
    save.
    check the status as REL for inspection lot.
    Now take UD
    I hope you understood
    Regards
    Sujit

  • Error while creating the Inspection plan by T.C QP01

    Hello Friends,
    In QP01, When i am trying to create a inspection plan system throwing the error message "The inspection plan identifier exists already. Enter another."
    Message no. QP054
    But in QP02, When i checked  for that material, Plant, Group Number, Group counter, Usage, Status, i didn't find the entry over there.
    Actually my requirement is to create a inspection plan for a material and plant combination with speicfic Usage as 61(customer requirement and status 4) but when i am trying to create that system throwing the error message explained above.
    Thanks and Regards,
    Jitendra Chauhan.
    Edited by: jitendra chauhan on Jun 1, 2010 4:28 PM

    Hello Friends,
    Thanks for your valuable answers.
    I checked in table MAPL, for a particular material, Plant, Group Number and Group Counter, there is no entry.
    Where as in table PLKO, for a particular Group Number and Group Counter, entry is there. Actually this Inspection Plan Group Number and Group Counter is assigned to multiple materials through Material Assignment. If i delete the entry for this in table PLKO, than for all rest of the materials also entry will be deleted.
    Hence how to resolve this?
    Actually for other material number, same plant, same group number and same group counter, entry exist. So can i simply go in the inspection plan of other material,same plant,same group number,same group counter and than inside the material assignment to assign the required  material code, plant and the group counter number?
    Looking ahead for valuable inputs from the genius.
    Thanks and Regards,
    Jitendra
    Edited by: jitendra chauhan on Jun 2, 2010 8:09 AM

  • Inspection Plan/Revision level

    Hi PP Gurus,
    I have a Problem in Inspection Lot.The system is not reading the new Inspection Plan.
    The material is assigned to a Revision level with valid from date 10.12.2007 and the earlier Inspection Plan(Group 21) was also created on 10.12.2007.Now this inspection Plan( Group 21) is deleted and New Inspection Plan(Group 100) is created with the Valid from date 10.04.2008.
    I have created an Inspection Lot dated 12.04.2008, Now the system is not reading the new Inspection Plan(Group 100).And the system is giving error "No Insection Plan found" while recording result on the inspection lot.
    We cant change the material ECO revision date as this would contravene our traceability record and  since, the Revision Level is maintained at Global level so cant afford this to change for other Plants.
    Kindly help me to assign the new Inspection Plan to the Inspection Lot.
    Thx in Advance
    Regards,
    Rakesh wade

    Hi,
    I do not know the impact of revısıon level on İnspaction lot.
    But, with reference to the Revısıon Level only the Confırmation wıll work both in Descrete and aswell as in REM.
    Say ıf yor Revesıon Level ıs AB, and the date ıs 01.03.2008, then during confirmatıon the sytem will explode the BOM with referenec to this Date.
    It may be possıble that there may not be any BOM available on that date then there wıll not be any Components suggested for GI or backflush.
    Probably you can corelate the same thıng to your ınspectıon lot... ( inspectıon lot not available etc..)
    Hope thıs helps..
    Regards,
    Siva

  • Re assignment of material from inspection plan group

    Dear Experts,
    I have an issue, we got a material which has multiple groups assigned to it.
    How to remove the materials assignment from the inspection plan group?
    Since the group contains more than 1000 line items, it is very laborious to search every line item and delete manually.
    Is there any 1 shot way to remove the assignment?
    Please help me out in this, because of multiple assignment, the lot gets into the status of CRTD.
    Thanks in advance,
    Anitha Pauline.

    hi,
    Use CWBQM.
    Regards

  • CWBQM to remove MIC from Inspection plan

    We have requirement to remove few MIC from multiple inspection plan. SO I wanted to use CWBQM trx for that purpose.
    We maintain inspection plan with unique id of group and gp counter.
    Group 111 Counter 1
    Gp 111 Countr 2
    .Group 111 Counter 110 and many more.
    Q-1: From abouve list I don't want to update all inspection plan. I want to update for only few counter of each group. So how to enter these group and group counter combination in initial screen to do mass change.
    Q-2: We wanted to remove MIC1, MIC2, MIC5 from all inspection plan. Where to enter these MICs in intial screen so system pull only those MIC list of insp plan? these are complete copy model MIC.
    Q-3: As said earlier we wanted to remove MIC from inspection plan. Now after excuting CWBQM we are getting list of MIC. So do mass change I'm selecting MIC column and applicable row and clicking on Extra --> mass change. Then system is not giving me MIC in pop-up list. It gives me all other data including qnt and qualitative field of MIC, but we wanted to remove complete MIC from plan. how to do that?
    Please help.
    Edited by: Tom_Eric on Apr 15, 2011 5:39 AM

    I'm following these steps:
    CWBQM work area - Q_OPR_000000000010
    Entering inspection plan data in selection screen - Ctrl + F7
    Got MIC list
    Select Master Inspection chara. column
    Select row to delete particular MIC
    Menu > Extra > Mass change --> Here I got two pop-up screen
    One with name Mass change inspection char -- but this screen is empty - no field on this screen
    There is one more screen which says "select fields" - List of fields like, lower limit, upper limit, catalog type, selected set, info feild, inspection method, plan, insp qualification, long term indicator, item......but there is no field which says MIC
    If I select any field from second pop-up then it pull that field to mass change screen, but that I don't want to do. My purpose to remove MIC, not its field.
    Please let me know where I am wrong?

  • ERROR WHEN RUNNING B.D.C FOR ASSIGN OF INSPECTION PLAN TO MATERIALS

    HI GURUS,
    WHEN I RUN B.D.C TO ASSIGN INSPECTION PLAN TO MATERIAL
    I AM GETTING THE FOLLOWING ERROR.
    Error occurred when checking type  group .
    Message no. CP852
    Diagnosis
    Errors occurred when checking the routing.
    Procedure
    u2022     If the check occurred online, display the checking log and remove the causes for the errors.
    u2022     If you saved the routing, call it up again and check it online.  Display the checking log and remove the causes for the errors.
    +NOTE: THIS INSPECTION PLAN WE HAVE ASSIGN MULTIPLE+ M.I.Cs WHICH ARE SIMILAR E.g.
    CHARA180:SMS,
    CHARA:190:SMS;
    CHARA:200:HRM:
    CHARA:210;HRM
    WHEN WE RUN COPY MODULE B.D.C.WE ARE GETTING ABOVE ERROR.
    REGARDS
    AMIT

    Hi Atul,
    WHEN WE DELETE THE REPEATED M.I.Cs AND ONLY RUN THE B.D.C WITH 16 CHARACTERISTICS WHICH ARE NOT REPEATED. THE PROGRAM/RECORDING RUN SUCCESSFULLY.
    AS SOON ADDED THE M.I.CS WHICH REPEATED IN CHARA:170,CHARA:180;CHARA;190;CHARA;200;CHARA;210;CHARA220.
    WE ARE NOT ABLE TO SAVE THE RECORDING AND WE GET ABOVE ERROR.
    MY ABAPER IS SAYING ITS A FUNCTIONAL ERROR.
    REGARDS
    AMIT

  • Quality plan deletion

    Hi all,
      I have uploaded the inspection plan through BDC .Due to some BDC mistake, MIC text was kept constant for all MICs in all inspection plan.
    Now when i am trying to change this MIC text through another BDC I am Getting some problems.
    So what i am planing is to delete all inspection plan With T code QSR6
    and again reload these plans with corrected BDC
                              Will there be any problem because of these deletion

    Hello Reobert,
    If you have found out the problem in BDC regardign the MIC text during the upload itself, and the the Batch was terminated during the opload itself, then the plans will be not there in the system. Eventhough pls check the existance for some of them from your upload file through QP03.If no data found, you can directly upload through new BDC.
    And if the plans found created, I would advice to create new BDC, to change the MIC data for the tasklist instead QSR6.
    Best Of Luck,
    Update us to help you more, reward points to help you better!
    Regards,
    Shyamal

Maybe you are looking for

  • Problem with File Content Conversion

    Hi All I am facing a problem with file content conversion. This is my sample file structure: Header_Record (Occurance - 1) Field1 in Header Field2 in Header Item(Occ-1 to n) Field3 in Item Field4 in Item <<ItemType>> (Structure in Item) (Occ - 0 to n

  • With holding tax deducting at the time of APP

    Hi, I configured the WHT of payment and Invoice and assigned the same to the vendor. I made the WHT base as manual and posted the amount manually both at the time of down payment and at the time of invoice.. But the system is again deducting the TDS

  • Phonememory

    HI THERE I HAVE NOKIA N97 PHONE.THE PROBLEM IS IN MY E MEMORY DRIVE DOESN'T SHOW MEMORY.WHEN EVER I CLIKE ON IT ITS SAYS MEMORY IS IN USE BUT ITS NOT USED.REST OF EVER THING IS WORKING VERY FINE LIKE DRIVE C AND MEMORY CARD. i forget to do back up an

  • Dualview on 2 external displays Satellite P100

    I just bought a Satellite P100 to replace my desktop computer expecting that since it has two external monitor outputs I could drive two external monitors simultaneously using DualView. It would appear that I can have either: Internal display + DVI c

  • Processing Items  Pick up: Available today.

    Hi guys and Happy Thanksgiving,      So I just ordered a new Macbook pro online( my first btw to order online) and  received an email saying Processing Items Pick up: Available today this. Does this mean that I can pick up my product right or there w