Inspection plan : Dependent characteristics specifications

Hi all ;
We want to list our inspection plans with a alv report. We use tables MAPL - PLKO - PLMK - PLPO - PLMW .
But , we can not find dependent characteristics in tables , when i click f1 , i get belowed result. It is a structure.
How can i get plmwb-lifnr with their characteristic results ?
Regards.
M.Ozgur Unal

Hi all ;
You can join with ZKRIZ between MAPL - PLMW to contact related lines.
Regards.
M.Ozgur Unal

Similar Messages

Inspection plan Vs Material specification

What is the difference between this and their limitation ,,when we have to use Inspection plan and when for the Material specification ?..Any detailed explanation please
Thanks for the help

Inspection plan and when for the Material specification
Inspection plan is plant specific material & plant combination.Means if same material is used in other plant you can not have Inspection plan of other plant used.
Whereas when you hava material specs then it is not plant specific.Nce created it can be used for any plant.
This can be used when your specifications are not plant depeendent.
Explore on sdn you will get more explainations..........
Inspection plan Vs Material specification
Material specification and Inspection plan - Task list usage
Inspection plan and material specification

Inspection plan with multiple specifications

I have to maintain 1 inspection plan for 2 vendors for incoming inspection.
Eg: Vendor A & B
Vendor A, I have to check parameter Fe, Mn, Si
Vendor B, I have to check parameters Fe, Moisture (For B, no need to check Mn, Si. Also Fe specification will vary for A and B vendors)
How can we do this in SAP. I cannot maintain 2 inspection plans.
Vineeth

Dear Vineeth
1) Dependent characteristic
For MIC 1000 - Vendor A specification 10 to 20, For Vendor B spec is 30 to 50
Suppose we receive 10 pc from vendor A , after GR inspection lot will be created from the 10 pc and the specification for MIC (1000) will be automaticaly assgined to the inspection lot ie 10 to 20. If the vendor was B then the specification would be 30 to 50.
In inspection lot there will be only one specificaton either it will be of Vendor A or that of B
2) In multiple specification is normaly used for Customer, country etc.
you have customer A , B , C & D with differnet specs for one single mic and you want to valuate the mic with all specification seperately at one time
In this multiple specification is used. here we can valuate the mic with all the specification of A, B , C & D and results in a seperate window in the result recording tab. accordingly you can check wehter the mic has passed as ok with all cusomter specification
Regards
Gajesh

Table for inspection plan

hi all ,
what are the tables related to inspection plan in QM Module
regards

Following r the important table for inpection plan
1) PLKO    Inspection plan header
2) PLPO    Operation details
3) PLMK    Inspection plan characteristics
4) PLMW   Dependent characteristics specification
5) TQ72     Type of share calculation
6) TQ75      Qm formula parameters
7)TQ03      Control for screen texts
Amol

Seasonal Inspection plan

Hi Friends,
1. My clients requirement is he wants the inspection plan seasonwise. as the tolerances of the characteristics are changing seasonally.
2 Whether identical inspection plan with periods validation possible?
how to map this senario?
Regards,
Anil Mahajan

Hello Anil,
you could maintain this scenario using the Change management, using the engineer change management you can plan changes of an inspection plan, or characteristics in the future. Accordingly if you change the plan using the change number these changes will get active when the change number is made valid.
The positive effect of this is that you can track all plan changes and view the valid plan to a certain date.
Regards,
Isabelle

Sale Order / Project specific Inspection Plan

Dear All,
I want to create Sale order or Project specific inspection plan for a material. This is because, my customers want some specific inspection requirements for individual materials, which are assigned to Sale order or project. I want to inspect the material after receipt for these specific account assignments. I do not want to assign the customer because, my single customer may give different sale orders with different inspection requirements.
But in inspection plan, i can not see the assignment of sale order / project as i can see in Rate Routing.
Can anybody tell me about this?
Regards,
Prashant Kolhatkar

Create a Material ONE as Configurable Material. Assign 300 Class Type Class with Charcateristics created through CT04 Transaction which in turn linked to MICs.
Create another Material TWO with same Class but not configurable but is a Variant of Material ONE (MRP 3 View)
Maintain Configuration Profiles for both Materials.
In Material TWO, for insp. type details click on Insp. by Config indicator.
Whenever a Sales Order is created, maintain the requirements from the Customer in Characteristics and save the Sales Order. Against this Sales Order whenever a GR is made for respective Production Order inspection lot is created against the specifications given by Customer and not that maintained in inspection plan.
Best Regards,
K. Raghavendra Nayak

Lower Specification Limit and Upper Specification Limit on Inspection Plan

Hi Experts:
I'm trying to input the lower and upper specification limit on inspection plan. I created my inspection characteristic but when I trying to digit the values, the systems erase that and give me the values from the inspection characteristics
Any idea?

Hi Deihus,
1.     While creating MIC you create it with upper, lower and target limits.
2.     The same MIC when you use in inspection plan, all the control indicators and lower, upper values get copied in to inspection plan from MIC.
3.     In fact this is the reason you can use this characteristic for several material.
Kindly excuse me as I could not interpret the term when I trying to digit the values . To digit value means what?
Whether you want to put different values in inspection plan rather than getting copied from MIC? If yes, you can do so. Just overwrite the values on QP01/QP02 and save.
Regards,
Anand
Edited by: Anand Rao on May 16, 2011 10:50 AM

Inspection Characteristics specific to a customer

Hi,
Can anybody tell me about the following
1) Is it Possible to Create inspection characteristics specific to a customer IF Yes how can we .
Please tell the step by step procedure
2) How do we create inspection characteristics specific to a product
Regards,
Raj

1) Is it Possible to Create inspection characteristics specific to a customer IF Yes how can we .
Please tell the step by step procedure
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2004a166-0a75-2c10-0caf-dc63b76c68fe?QuickLink=index&overridelayout=true
2)How do we create inspection characteristics specific to a product
dependent characteristic spec in qp01

How to progammatically get Inspection Characteristics from Inspection Plan

How do I programmatically get Inspection Characteristics from an inspection plan? I am currently getting inspection characteristics from inspection lots via a QM-IDI RFC call (QIRF_SEND_REQUIREMENTS_GET_DAT2), but if the Inspection Characteristic is not in an inspection lot, I don't get it via the RFC call. What BAPI/RFC/IDOCS mechanism can I use from an external subsystem (VB.NET app) to get inspection characteristics (Spec Limits, Target, Operation, Activity) associated with a material in an inspection plan?
Thanks,
Ed

The problem is the SAP system that my external subsystem (VB.NET application using QM-IDI) is interfacing with does not have inspection lots (and the customer is not willing to add inspection lots), so the QM-IDI RFC that I'm using (QIRF_SEND_REQUIREMENTS_GET_DAT2) does not return the inspection characteristics (spec limits, etc) that I require. My customer creates a reference (QP11) with inspection characteristics, then attaches the reference to a Material (QP01). When I try to get the inspection characteristics for the material via QIRF_SEND_REQUIREMENTS_GET_DAT2, I don't get the inspection characteristics because there is no inspection lot associated with the material and inspection characteristics.
The design is for my external subsystem to do the Material Inspection Characteristic valuation, and then send the valuation results back to SAP. Is there a way to get Material Inspection Characteristics and then send the results back given the SAP setup I described above?
Thanks,
Ed

Material specification and Inspection plan - Task list usage

Dear Friends,
In inspection type Task list usage is assigned
For Example
inspection type 01 - usage - 03
inspection type 05 - usage - 05
inspection type 06 - usage - 07
inspection type 10 - usage - 06
In my scenario i want to use all the above inspection type for a product
if i use mateial specification there is no any problem with my Task list usage
If suppose i use inspection plan do i need to create different inspection plan with different usage
or is it possible to create one inspection plan with all the above usage
what about universal usage 03 can i use it
i try to use but system does not triggering inspection lot
can any one Suggest some ideas
Many Thanks & Regards
Raj

Hi Raju,
All of first pls understand the concept of Task list and specification.
If you need to inspection any material in very systematic manner, where you will have well segregated operations where the appropriate Work Centers will be bind and under that hierarchy MIC will be attached. The inspection will be governed by some inspection points. And according the the same Samples will be calculated. When you wanna go with all these functionality then you must have to use Task list (Inspection plan).
And if you don't wish to have these functions then simply go with the material specification.
Now it comes the actual query about task list usage.
If there is a common inspection plan is supposed to be used for all the inspection types for your material then you can prepare only one inspection plan, put ant of the Usage to it it can be 05 or 03 universal. But what you have to do is,
Go to SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Types Execute and set the Task list usage as the same it is set in the inspection plan for all those Inspection types for which that common inspection plan is supposed to be used.
Note:- There is no any link between inspection lot creation and task list usage of inspection plan.
Regards,
Shyamal

QM Material specification with inspection plan

Hello,
I'm trying to setup QM material spec with inspection plan and it doesn't work.
I setup material master (With insp plant and with material spec).
I Created a characteristic that I used in my inspection plan and maintained the characteristic in the material specification.
When I create an inspection lot (89), the characteristic is always inserted at the end instead of redefining my specifications into the pre-defined characteristic.
Have I missed something?
Ghislain

As per our business scenario for Pharmaceutical we use Inspection with attached MIC with Sampling and Sample drawing Procedure, Sampling scheme to check the Quality of RM/PM/FP, can u give me some idea regarding;
1) Material Specificaton in Inspection plan
2) Reference Operation set with its use.
3) Dynamic Modification Rule
As for pharma we do;
1) Create MIC
2) Create Inspection plan
3) Attaching the MIC to an Inspection plan with sampling and sample drawing procedure
4) Attacing an Inspection Plan to an Inspection Lot
5) Result Recording and Usage Decision of Inspection lot for
In Automotive and othe Process Industry how the Dynamic modification rule,reference operation set, material specification flow.
Reply will be rewarded
Thanks in advance its urgernt

Specifications and Inspection Plans

Hi,
I have few questions regarding Specs and Inspection plans.
1) What is the primary purpose of specifications(CG02 transaction)?
2) What is the use of specficications in QM and EHS modules?
3) How are specifications related to Inspection plans?
4) What is the business advantage by enabling specification data to be copied directly into Inspection plans?
Thanks in adavnce
Vishnu

The idea is that you can maintain all the specs in the EH&S module in one place. Specs are used of course to evaluate the material and make sure the material is what it is suppose to be.
The transferring however of the specs from the EH&S module to QM however leaves a lot to be desired. I don't recommend it at this time. If you attempt to do it, plan on bringing in a consulting partner or consultants. You'll probably wind up doing a lot of coding to make it work for you as there isn't much flexibility or functionality as it is currently delivered. All IMHO.
Craig

Customer specific Inspection Plan

hi experts,
Can any one help to create customer specific inspection plan. Our client requirements as follows,
In Inspection plan based on Usage we can able to assign vendor wise inspection plan for single material in material assignment, like that is it possible to assign customer name in inspection plan. so that we can choose the Inspection plan based on customer specification. any one can help me in the above requirement.
awaiting for your replies,
Muthamil

Dear Muthamil
There is no configuration setting required . A typical cusomter inspection plan can be given as
For a material X Suppose you have Customer A, B , C, D , E. Customer . A & B have the same specification c, D,& E has a another set of specification in this case :
QP01 > Material (X) / plant > Usage and status > material assignment > give the customer A. As you have mulitple customer ie B also with same specification then in material assignement input the same group counter in the below line of the material assignment along with /material and customer B combination.
The give the operation details and in inspection characerisitc MIC details as you normaly give
For the next set again goto QP01 ( for customer CDE
QP01 > Give the same material X and Plant > Click on New entries > Usage and status > material assignment > give the customer C.
As you have mulitple customer D E, also with same specification then in material assignement input the same group counter in the below line of the material assignment along with /material and customer Dcombination and repeat the same for customer E
By doing this system should automacticaly pick up the customer specification when sale order of Customer E is used
hope this helps
Regards
Gajesh

Inspection plan based on workcentre

Dear Sir
We have one plant,in that we are using two interfaces,result recording has to come from this interfaces for that there is only one material code,we are using workcenter in inspection plan and even for that plan there are two operation,so how get the correct plan for the production confirmation
Aim if there is eg X work center its should take X plan
If there is Y workcenter it should take take Y plan
We donu2019t want to use dynamic modification rule ,and in search field in we use some to detect the plan,it will peak but how to segregate that w r t to workcentre

Dear Kunal,
I am not so sure what sort of user interface you are dealing with.
First of all may I request you to clarify with which inspection type you are working (03, 04, 01 or 89)?
For every operation you can assign only 1 work center and 1 inspection plan may contain several operations.
Inspection characteristics are defined at operation level only. These MICs may also vary operation to operation depending upon nature of operation. For example, if your inspection plan contains u201CDrillingu201D and u201CInner Threadingu201D as 2 operations, you can have diameter as inspection parameter for drilling and pitch for threading. Kindly note this entire information is associated with only 1 plan.
When the inspection lot is created and you click on results tab in QA32, system throws pop up of operations. There you need to choose for which operation you want to perform result recording. If you select Drilling, only diameter will be displayed to you to put observed reading.
To sum up, this mechanism ensures to pick operation specific (work center specific) inspection characteristics. There is no need to create 2 inspection plans if your plan contains 2 operations in a single plan.
Regards,
Anand Rao

Inspection Plan specs for Vendors / Customers

Hello every one,
In my current client I had to maintain customer wise Quality specifications for each material. i.e. my quality parameters change for each customer / vendor. So how do I map the same? I heard we can use dependent characteristics specs. But I am not able to assign the vendor or customer here. Is there any specific configuration required for the same? If not, do tell me the step by step process to assign the same.
Sincerely,
Aji

Refer
Dependent Characteristic specs in inspection plan for customers
"dependent char specs" push botton
Dependent char for different materials in CWBQM
dependent characteristic spec in qp01

Inspection plan : Dependent characteristics specifications

Similar Messages

Maybe you are looking for