Inspection Plan status (Header details)
Hi
I want to change Inpection plan status(Inspection plan -Headerdetails) from 4 to 1, this I want as a mass process
Can any body help
Regards
Vivek
Hello Vivek,
Follow the steps,,,
Run CWBQM
Enter Current Working Area as "Q_TSK_000000000010"
Press Enter
Select the Task list Type as "Inspection Plan"
As you need to change it for all inspection plan in the data base, don't use any other filter criteria just Press "F8" to load the task list.
In the next appearing screen EWB: Headers Overview the 18th column is for STATUS.
Select this column
Then Select all line items (Short cut key to do such is (Ctr+F2)
Then follow the path Extras--->Mass Change
Enter New Value here
Check and then Execute.
Regards,
Shyamal
Similar Messages
-
Dear SAP,
We have a requirement that QC will creat the MIC & Inspection Plan in status created, and QA will review and change the status from Created to Release.So where or in which object level i can put control so that QC not able to select the Status 4 for inspection plan, and Release for MIC.
Regards,
Asif.Dear Craig,
I have created a new roll will basis help.and attached the below condition in the object you can refer dow.But then to user able to create MIC & Inspection plan in release mode.Please explain what would be the issue.
MIC Status Table & Field Name (Object Name-Q_STA_QPMK,Table-QPMK, Field-LOEKZ)
Inspection Plan Status Table & Field Name (Object Name-Q_ROUT,Table-PLKPO, Field-VERWE)
QSTATMERK Master Inspection Characteristic Status 1
STATU Status 1
Regards,
Asif -
Tables which stores PRT details of QM inspection plans
Hello All,
I would like to know the tables which store the details of the Production Resource Tool (PRT) which are assigned to an activity in a QM Inspection plan?hi,
try these tables:
AFFH PRT assignment data for the work order
CRVD_A Link of PRT to Document
CRVD_B Link of Document to PRT
CRVE_A Assignment PRT data - equipment
CRVE_B Assignment equipment - PRT data
CRVM_A Link of PRT data to a material
CRVS_A Relationship of PRT internal number to PRT external number
CRVS_B Relationship of PRT external number to PRT internal number
Customizing tables:
TCF02 PRT categories
TCF03 Texts for the production resources/tools category
TCF04 Status of the PRT master
TCF05 Language-dependent text table for PRT status
TCF06 Field groups in the PRT master for reference
TCF07 Language-dependent texts for field groups in PRT master
TCF08 Assignment of PRT master fields to field groups
TCF10 PRT control key
TCF11 Language-dependent text table for PRT control keys
TCF12 PRT group key
TCF13 Language-dependent text table for PRT group keys
I hope it helps
arjun -
In BDC VA02 i am uploading header details in BILLING PLAN tab.
Hi Friends,
In BDC VA02 i am uploading header details in BILLING PLAN tab.
I am having sales order no in flat file.
While i am clicking BILLING PLAN tab its showing 1 POPUP screen for Milestobe For billing plan (INPUT AS NETWORK NO).
Some sales order nos this popup is not coming.
How to code this bdc?CLOSED
-
Inspection lot status CRTD CHCR SPRQ
Dear Expert
I created inspection plan for a material and generated inspection lot after GR from PO. But it's status is coming as CRTD CHCR SPRQ, release status is not coming, pls suggest where i want to look for this?.Hello,
I am having a similar issue with inspection lots. The information provided has been very helpful, but I have not been able to resolve my issue. Forgive me if my terminology is not clear as SAP is very new to me. Here goes:
When my inspectors try to enter an inspection lot with transaction QE01, they receive the error "The function you selected cannot be carried out." When you click the detailed info button, a transaction analysis box appears with the following info:
Influence of System Status on Transactions
Stat Description Influence
CRTD Created Disallowed
If you click on status display instead detailed info, there is a system status tab with CRTD, PREQ, CHCR & SPRQ. All four options are checked, but to the right of the first two there is a grayed out piece of paper with an arrow. It appears the system is checking for these features, but they aren't properly set up.
As of now, we have no inspection plans, so material is simply checked to drawings and specifications and and an accept/reject usage decision is entered by receiving inspectors. My immediate concern is to get the material released that is stuck in inspection. If I click on the inspection task list, there is no task list created for the material.
Our receiving inspection supervisor was the only one trained in QM and he left the company this week. Is anyone familiar with this error?I'm desperate for a solution.
Regards,
N. King -
hi all ,
what are the tables related to inspection plan in QM Module
regardsFollowing r the important table for inpection plan
1) PLKO Inspection plan header
2) PLPO Operation details
3) PLMK Inspection plan characteristics
4) PLMW Dependent characteristics specification
5) TQ72 Type of share calculation
6) TQ75 Qm formula parameters
7)TQ03 Control for screen texts
Amol -
Recurring inspection lot status "created" changed automatically to "Release" without change history
Dear Experts,
I observed that for few materials recurring inspection lot (inspection lot origin 09) status from "CRTD CHCR SPRQ" to "REL CALC SPRQ PRSI" changed automatically without manual interruption.
I have thoroughly checked the change documents in status management, but the there is change history found.
can anyone help me understand the root cause of the issue?
Regards,
A.SureshHi
Pls check this link
QM - Recurring Inspection (type 09)
Inspection type 09 process
Note : System status CRTD because there is no Insp.plan master data for particular material
Check & create Inspection plan for material & also check the Material master QM view Insp.set up tab.
Suppose if already created Insp.plan for material,then you need to assign Insp.plan manually in QA32 select the insp.lot line & click change Insp.lot icon in Header ,click spec.& save
Then system status change from CRTD to REL.
Thanks in advance -
Customer specific Inspection Plan
hi experts,
Can any one help to create customer specific inspection plan. Our client requirements as follows,
In Inspection plan based on Usage we can able to assign vendor wise inspection plan for single material in material assignment, like that is it possible to assign customer name in inspection plan. so that we can choose the Inspection plan based on customer specification. any one can help me in the above requirement.
awaiting for your replies,
MuthamilDear Muthamil
There is no configuration setting required . A typical cusomter inspection plan can be given as
For a material X Suppose you have Customer A, B , C, D , E. Customer . A & B have the same specification c, D,& E has a another set of specification in this case :
QP01 > Material (X) / plant > Usage and status > material assignment > give the customer A. As you have mulitple customer ie B also with same specification then in material assignement input the same group counter in the below line of the material assignment along with /material and customer B combination.
The give the operation details and in inspection characerisitc MIC details as you normaly give
For the next set again goto QP01 ( for customer CDE
QP01 > Give the same material X and Plant > Click on New entries > Usage and status > material assignment > give the customer C.
As you have mulitple customer D E, also with same specification then in material assignement input the same group counter in the below line of the material assignment along with /material and customer Dcombination and repeat the same for customer E
By doing this system should automacticaly pick up the customer specification when sale order of Customer E is used
hope this helps
Regards
Gajesh -
Inspection plan - Valid to date
Dear gurus,
Iam using change number to create Inspection plan. System is displaying always Valid to date as "31.12.9999". But as per business requirement of the client, validity period is 3 yrs. How can i change the date.
1) Can i cahnge at change number level?
2) or At inspection plan level?
Iam giving you the details of the field at Inspection plan level.
Transaction: Qp01
screen no: 1200
screen Field name: PLKOD-DATUB
Program name: SAPLCPDI
Package: CP
Pls guide me how to get valid date as 3 yrs plus valid from date.
thanks and regards
Venkat. VHi,
For change number effetivity we can think of another alternative.
1) Create one change number and create a inspection plan with group counter 1.
2) Create another change number and create another inspection plan with group counter 2.Second change number
validity should be from 01.01.2012
3) When a goods receipt is done system automatically assigns the inspection plan with group counter 1 till 31.12.2011.
4) When a goods receipt is done on 01.01.2012 system will create the inspection lot with status created as there are
2 inspection lots from 01.01.2012.
5) Go to the first inspection lot and change the status to 1 and assign second inspection lot which is valid from 01.01.2012.
CSN -
Inspection plan for inprocess inspection
Hi QM Gurus
please let me know can I use an inspection plan for inprocess inspection
Thanks
TRDear,
Inspection Plan is similar to routing, which will indicate what are all characteristics need to be checked / inspected when you receive a material. Is a master data. Once the inspection lot is created we will check the inspection plan and perform the inspection and give the defects recording and usage decision for the inspection lots.
So for inspection type 03 use routing with usage as 1 and status as 4 and control key as PP04 to specify the inspection characteristics.
when u cofirm that perticular operation it will ask to record the results. Inspection lot get genarated during order release this we can see in the order header data assignment tab. PP04 assignement says this operation is relevent for inprocess inspection and we need to assign MIC's for this which are relevent created in QS21 for this also sampling procedure created in QDV1.
Regards,
R.Brahmankar -
Inspection plan expert advise rquired
Dears
as i don't want to have much more master data in my production server i was decide to work without inspection plan
to achive this i have created 4 dummy material in the system and create inspection plan for these four material
so when ever any GR happen to my real material system will created inspection lot with CRTD status
so i will got to QA02 transaction and in inspection specification tab i change material name with any one of the dummy material
and click the task list button so system will assign the inspection plan
Now i want to know if i work on these way what are the consequences will come to me later in production sever.and please tell me that these is a good method??
i am expecting any expert advice on this
FaisalSure Faisal, I try to explain!
1. Basically letu2019s first of all understand why we need to create a task list (inspection plan).
2. Go to material master inspection set up. Double click on assigned inspection type there or click on detail view there.
3. Under detail information on inspection type (the below portion where you assign inspection types) you will observe that Insp with task list option is ticked default for 01 inspection type.
4. As a result of which you must have to create inspection plan. If you donu2019t lot goes to CRTD mode.
An idea about Z01 is, it will be the copy of 01 inspection type. The only difference is u201CInsp with task list would not be ticked. So that there would be no compulsion to create task list eliminating the lot status CRTD. How to customize this?
1. QCC0 > Quality Inspection > inspection lot creation > Maintain inspection types > select 01 inspection type and press F6 to create Z01 type by copying 01.
2. Give the code as Z01 change the description as inspection without task list. Save it.
3. Now go to QCC0 > Quality Inspection > inspection lot creation > define default values for inspection type. Again here you can copy from 01. Make following changes there. Remove inspection with task list tick, remove record characteristic results and assign requirement automatically ticks. And save.
4. Finally go to QCC0 > Quality Inspection > inspection lot creation > Maintain inspection lot origins and assign inspection types
5. Select 01 lot origin and double click on Inspection types for the origin. Assign there Z01 and save.
6. You can save all these changes in a single request.
Now assign this new inspection type Z01 to material master and click on preferred inspection type and active tick as well. You will notice that inspection lot would be generated with Z01 inspection type. Here directly proceed for stock posting or defect recording as no need to record results.
Try if works for you!
Regards,
Anand Rao -
QP01 - To Create a Inspection Plan
Hi Associates and Consultants,
Have any one worked on T-Code QP01 to create a Inspection Plan Using BDC's or BAPI's.
If so please try to ping me.
Regards,
sg*& Report ZQMB_QP01_INSP_PLAN_NEW
REPORT ZQMB_QP01_INSP_PLAN_NEW
NO STANDARD PAGE HEADING LINE-SIZE 255 MESSAGE-ID ZQMB_INSP_PLAN_NEW.
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_TABDATA,
MATNR TYPE RC27M-MATNR, "Material No
WERKS TYPE RC27M-WERKS, "Plant
PLNNR TYPE RC271-PLNNR, "Key for Task List Group
AENNR TYPE RC271-AENNR, "Change Number
KTEXT TYPE PLKOD-KTEXT, "Task list description
VERWE TYPE PLKOD-VERWE, "Task list usage
STATU TYPE PLKOD-STATU, "Status
SLWBEZ TYPE PLKOD-SLWBEZ, "Identification for the Inspection Point Field Combination
QPRZIEHVER TYPE PLKOD-QPRZIEHVER, "Sample-Drawing Procedure
END OF TY_TABDATA.
TYPES: BEGIN OF TY_TBCTRL1,
MATNR TYPE RC27M-MATNR, "Material No
WERKS TYPE RC27M-WERKS, "Plant
PLNNR TYPE RC271-PLNNR, "Key for Task List Group
AENNR TYPE RC271-AENNR, "Change Number
ARBPL TYPE PLPOD-ARBPL, "Work center
STEUS TYPE PLPOD-STEUS, "Control key
LTXA1 TYPE PLPOD-LTXA1, "Operation short text
END OF TY_TBCTRL1.
TYPES: BEGIN OF TY_TBCTRL2,
MATNR TYPE RC27M-MATNR, "Material No
WERKS TYPE RC27M-WERKS, "Plant
PLNNR TYPE RC271-PLNNR, "Key for Task List Group
AENNR TYPE RC271-AENNR, "Change Number
ARBPL TYPE PLPOD-ARBPL, "Work center
STEUS TYPE PLPOD-STEUS, "Control key
VERWMERKM TYPE PLMKB-VERWMERKM, "Master Inspection Characteristics
PMETHODE TYPE PLMKB-PMETHODE, "Inspection Method
PMTVERSION TYPE PLMKB-PMTVERSION, "Version Number of the Inspection Method
STICHPRVER TYPE PLMKB-STICHPRVER, "Sampling Procedure in Inspection Characteristic
PRUEFEINH(7)," TYPE PLMKB-PRUEFEINH, " Value
PROBEMGEH(3)," TYPE PLMKB-PROBEMGEH, "Unit
STELLEN(3), "TYPE PLMKB-STELLEN, "Number of Places to the Right of a Decimal Point (Accuracy)
MASSEINHSW TYPE RQPAS-MASSEINHSW, "Measurement Unit in Which Quantitative Data Is Maintained
SOLLWERT TYPE QFLTP-SOLLWERT, "Target Value for a Quantitative Characteristic
TOLERANZUN TYPE QFLTP-TOLERANZUN, "Lower Specification Limit
TOLERANZOB TYPE QFLTP-TOLERANZOB, "Upper Specification Limit
DUMMY10 TYPE PLMKB-DUMMY10, "Info Field1
DUMMY20 TYPE PLMKB-DUMMY20, "Info Field2
DUMMY40 TYPE PLMKB-DUMMY40, "Info Field3
END OF TY_TBCTRL2.
TYPES: BEGIN OF TY_CHECK,
MATNR TYPE RC27M-MATNR, "Material No
WERKS TYPE RC27M-WERKS, "Plant
PLNNR TYPE RC271-PLNNR, "Key for Task List Group
AENNR TYPE RC271-AENNR, "Change Number
END OF TY_CHECK.
Declaration of the Internal Table & Work Area.
DATA: ITST_TABDATA TYPE SORTED TABLE OF TY_TABDATA WITH
UNIQUE KEY MATNR WERKS PLNNR, " AENNR,
" Internal table for Non-Table Control Records
WA_TABDATA TYPE TY_TABDATA,
ITST_TABCTRL1 TYPE TABLE OF TY_TBCTRL1 , " Internal table for the First Screen with Table Control
WA_TABCTRL1 TYPE TY_TBCTRL1,
ITST_TABCTRL2 TYPE TABLE OF TY_TBCTRL2, " Internal table for the Second Screen with Table Control
WA_TABCTRL2 TYPE TY_TBCTRL2,
ITST_CHECK TYPE TABLE OF TY_CHECK, " Internal table to check if record already exists
WA_CHECK TYPE TY_CHECK.
Constants
CONSTANTS: C_QP01 TYPE CHAR4 VALUE 'QP01', " Transaction Name
C_A TYPE CHAR1 VALUE 'A', " Mode
C_S TYPE CHAR1 VALUE 'S'. " Status
Global data Declaration
DATA: GV_YEAR(4) TYPE C, " Year part for Date
GV_MNTH(2) TYPE C, " Month part for Date
GV_DATE(2) TYPE C, " Day part for Date
GV_DATUM(10) TYPE C, " Concatenated Date in dd.mm.yyyy Format
GV_ANS TYPE C, " Answer to Continue
GV_FLAG_NEW(1) TYPE N VALUE 0. " Flag to set if Inspection Plan exists.
Declaration of the Internal Table with Header Line comprising of the uploaded data.
DATA: BEGIN OF IT_FILE_UPLOAD OCCURS 0.
INCLUDE STRUCTURE ALSMEX_TABLINE. " Rows for Table with Excel Data
DATA: END OF IT_FILE_UPLOAD.
Batch Input Data for a single Transaction.
Message of Call Transaction.
DATA: ITST_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE, " BDC Table
ITST_MSGTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE. " BDC Messages
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001,
BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
PARAMETERS: P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK B2,
END OF BLOCK B1.
E V E N T : AT S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = 'X'
CHANGING
FILE_NAME = P_FNAME.
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Upload Excel file into Internal Table.
PERFORM UPLOAD_EXCEL_FILE. " To Upload the Excel File
IF NOT IT_FILE_UPLOAD IS INITIAL.
Confirm whether you want to proceed with the Upload.
PERFORM CONFIRM_UPLOAD.
IF GV_ANS EQ '1'.
Organize the uploaded data into another Internal Table.
PERFORM ORGANIZE_UPLOADED_DATA.
Validate if already some Inspection Plan exists for that Material Plant
IF ITST_TABDATA[] IS NOT INITIAL.
SELECT MATNR
WERKS
PLNNR
FROM MAPL
INTO TABLE ITST_CHECK
FOR ALL ENTRIES IN ITST_TABDATA
WHERE MATNR = ITST_TABDATA-MATNR AND WERKS = ITST_TABDATA-WERKS AND
PLNNR = ITST_TABDATA-PLNNR
AND PLNTY = 'Q' AND LOEKZ <> 'X'.
ENDIF.
LOOP AT ITST_CHECK INTO WA_CHECK .
LOOP AT ITST_TABDATA INTO WA_TABDATA WHERE MATNR = WA_CHECK-MATNR
AND WERKS = WA_CHECK-WERKS AND PLNNR = WA_CHECK-PLNNR.
AND AENNR = WA_CHECK-AENNR.
IF SY-SUBRC = 0. " If exists SET FLAG = 1.
GV_FLAG_NEW = 1.
DELETE ITST_TABDATA WHERE MATNR = WA_CHECK-MATNR AND WERKS = WA_CHECK-WERKS
AND PLNNR = WA_CHECK-PLNNR.
AND AENNR = WA_CHECK-AENNR.
DELETE ITST_TABCTRL1 WHERE MATNR = WA_CHECK-MATNR AND WERKS = WA_CHECK-WERKS
AND PLNNR = WA_CHECK-PLNNR.
AND AENNR = WA_CHECK-AENNR.
DELETE ITST_TABCTRL2 WHERE MATNR = WA_CHECK-MATNR AND WERKS = WA_CHECK-WERKS
AND PLNNR = WA_CHECK-PLNNR.
AND AENNR = WA_CHECK-AENNR.
ENDIF.
ENDLOOP.
ENDLOOP.
Kick-start BDC Operation
PERFORM F_START_BDC. " If answer is YES, then start BDC Operations
ENDIF.
ELSE.
LEAVE PROGRAM. " If answer is NO or CANCEL then leave program
ENDIF.
*& Form F_START_BDC
text
--> p1 text
<-- p2 text
FORM F_START_BDC .
DATA : LV_FNAM(20) TYPE C, " Concatenated field name
LV_IDX1(3) TYPE N VALUE 1, " Index For Table Control 1
LV_IDX2(3) TYPE N VALUE 1, " Index For Table Control 2
LV_GOTO(4) TYPE N , " Index for GoTo Line No incase of Page Down
LV_PG(3) TYPE N VALUE 1, " Index for Page No
LV_IDX(3) TYPE N VALUE 1.
IF ITST_TABDATA[] IS INITIAL.
MESSAGE E000. " If Inspection Plan exists for all items in file, show error message
ENDIF.
LOOP AT ITST_TABDATA INTO WA_TABDATA.
LV_IDX2 = '1'.
CLEAR ITST_BDCDATA.
REFRESH ITST_BDCDATA.
GV_YEAR = SY-DATUM+0(4).
GV_MNTH = SY-DATUM+4(2).
GV_DATE = SY-DATUM+6(2).
CONCATENATE GV_DATE '.' GV_MNTH '.' GV_YEAR INTO GV_DATUM.
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '8010'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RC27M-MATNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RC27M-MATNR'
WA_TABDATA-MATNR. " 'kiz0006c'
PERFORM BDC_FIELD USING 'RC27M-WERKS'
WA_TABDATA-WERKS. " 'B001'
PERFORM BDC_FIELD USING 'RC271-PLNNR'
WA_TABDATA-PLNNR. " 60000000-99999999
PERFORM BDC_FIELD USING 'RC271-STTAG'
GV_DATUM. " '16.01.2008'
PERFORM BDC_FIELD USING 'RC271-AENNR'
WA_TABDATA-AENNR. " CHANGE NUMBER
IF GV_FLAG_NEW = 1. " If Exists then diff screen for clicking NEW ENTRIES tab
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RC27X-ENTRY_ACT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ANLG'.
PERFORM BDC_FIELD USING 'RC27X-ENTRY_ACT'
'1'.
PERFORM BDC_DYNPRO USING 'SAPLCPDA' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ELSE.
PERFORM BDC_DYNPRO USING 'SAPLCPDA' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ENDIF.
IF WA_TABDATA-KTEXT <> SPACE.
PERFORM BDC_FIELD USING 'PLKOD-KTEXT'
WA_TABDATA-KTEXT. " 'ZOLMITRIPTAN STAGE C1111'
ENDIF.
PERFORM BDC_FIELD USING 'PLKOD-VERWE'
WA_TABDATA-VERWE. " '5'
PERFORM BDC_FIELD USING 'PLKOD-STATU'
WA_TABDATA-STATU. " '4'
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLKOD-QPRZIEHVER'.
PERFORM BDC_FIELD USING 'PLKOD-SLWBEZ'
WA_TABDATA-SLWBEZ. " '200'
PERFORM BDC_FIELD USING 'PLKOD-QPRZIEHVER'
WA_TABDATA-QPRZIEHVER. " 'ACTIVE'
PERFORM BDC_FIELD USING 'PLKOD-CHRULE'
'1'. " With change number
PERFORM BDC_FIELD USING 'PLKOD-CCOAA'
'1'. " Change Type for all objects
PERFORM BDC_DYNPRO USING 'SAPLCPDA' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=VOUE'.
LOOP AT ITST_TABCTRL1 INTO WA_TABCTRL1 WHERE MATNR = WA_TABDATA-MATNR
AND WERKS = WA_TABDATA-WERKS
AND PLNNR = WA_TABDATA-PLNNR.
AND AENNR = WA_CHECK-AENNR.
ON CHANGE OF WA_TABCTRL1-MATNR OR WA_TABCTRL1-WERKS OR WA_TABCTRL1-PLNNR." OR WA_TABCTRL1-AENNR.
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '1400'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLPOD-LTXA1(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
CONCATENATE 'PLPOD-ARBPL(' LV_IDX1 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL1-ARBPL. " 'qc01'
CONCATENATE 'PLPOD-STEUS(' LV_IDX1 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL1-STEUS. " 'qm01'
CONCATENATE 'PLPOD-LTXA1(' LV_IDX1 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL1-LTXA1. " 'opearation1'
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '1400'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLPOD-VORNR(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=QMUE'.
PERFORM BDC_FIELD USING 'RC27X-ENTRY_ACT'
'1'.
PERFORM BDC_FIELD USING 'RC27X-FLG_SEL(01)'
'X'.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-STELLEN(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
LOOP AT ITST_TABCTRL2 INTO WA_TABCTRL2 WHERE MATNR = WA_TABCTRL1-MATNR AND
WERKS = WA_TABCTRL1-WERKS AND
PLNNR = WA_TABCTRL1-PLNNR.
AND AENNR = WA_TABCTRL1-AENNR.
AND ARBPL = WA_TABCTRL1-ARBPL AND
STEUS = WA_TABCTRL1-STEUS.
LV_GOTO = LV_PG * 140. " For Page Down on Second Table Control
IF LV_IDX2 >= 14.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RQPAS-AB_MKNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RQPAS-AB_MKNR'
LV_GOTO .
LV_IDX2 = 2.
LV_PG = LV_PG + 1.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ELSE.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-STELLEN(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ENDIF.
CONCATENATE 'PLMKB-VERWMERKM(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-VERWMERKM. " 'MIC00001'/ ' MIC00050'
IF WA_TABCTRL2-PMETHODE <> SPACE.
CONCATENATE 'PLMKB-PMETHODE(' LV_IDX2')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PMETHODE. " 'met00001'
CONCATENATE 'PLMKB-PMTVERSION(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PMTVERSION. " '1'
CONCATENATE 'PLMKB-STICHPRVER(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-STICHPRVER." 'APIFX1'
CONCATENATE 'PLMKB-PRUEFEINH(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PRUEFEINH. " '20'
CONCATENATE 'PLMKB-PROBEMGEH(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PROBEMGEH. " 'G'
IF WA_TABCTRL2-STELLEN <> SPACE.
CONCATENATE 'PLMKB-STELLEN(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-STELLEN." '2'
ENDIF.
IF WA_TABCTRL2-MASSEINHSW <> SPACE.
CONCATENATE 'RQPAS-MASSEINHSW(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-MASSEINHSW. " '%'
ENDIF.
IF WA_TABCTRL2-SOLLWERT <> SPACE.
CONCATENATE 'QFLTP-SOLLWERT(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-SOLLWERT." '10'
ENDIF.
IF WA_TABCTRL2-TOLERANZUN <> SPACE.
CONCATENATE 'QFLTP-TOLERANZUN(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-TOLERANZUN." '5'
ENDIF.
IF WA_TABCTRL2-TOLERANZOB <> SPACE.
CONCATENATE 'QFLTP-TOLERANZOB(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-TOLERANZOB." '15'
ENDIF.
IF WA_TABCTRL2-DUMMY10 <> SPACE.
CONCATENATE 'PLMKB-DUMMY10(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-DUMMY10." Info Field 1
ENDIF.
IF WA_TABCTRL2-DUMMY20 <> SPACE.
CONCATENATE 'PLMKB-DUMMY20(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-DUMMY20." Info Field 2
ENDIF.
IF WA_TABCTRL2-DUMMY40 <> SPACE.
CONCATENATE 'PLMKB-DUMMY40(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-DUMMY40." Info Field 3
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '1501'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENT1'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-VERWMERKM'.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '1502'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENT1'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-PMETHODE'.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '1502'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENT1'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-PMETHODE'.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
CONCATENATE 'PLMKB-MERKNR('LV_IDX2')' INTO LV_FNAM.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
LV_FNAM.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=QMAM'.
PERFORM BDC_FIELD USING 'RQPAS-ENTRY_ACT'
'1'.
IF LV_IDX2 = 1. " If only one entry then select it
CONCATENATE 'RQPAS-SEL_FLG('LV_IDX2')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
'X'.
ELSE.
LV_IDX = LV_IDX2 - 1. " Deselect previous entry and select current one
CONCATENATE 'RQPAS-SEL_FLG('LV_IDX')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
CONCATENATE 'RQPAS-SEL_FLG('LV_IDX2')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
'X'.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0160'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=QMBW'.
PERFORM BDC_FIELD USING 'PLMKB-KURZTEXT'
'Description'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-QERGDATH'.
PERFORM BDC_FIELD USING 'PLMKB-QERGDATH'
'01'. " Quality Certificate
ELSE.
CONCATENATE 'PLMKB-PMTVERSION(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PMTVERSION. " '1'
CONCATENATE 'PLMKB-STICHPRVER(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-STICHPRVER." 'APIFX1'
CONCATENATE 'PLMKB-PRUEFEINH(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PRUEFEINH. " '20'
CONCATENATE 'PLMKB-PROBEMGEH(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PROBEMGEH. " 'G'
IF WA_TABCTRL2-STELLEN <> SPACE.
CONCATENATE 'PLMKB-STELLEN(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-STELLEN." '2'
ENDIF.
IF WA_TABCTRL2-MASSEINHSW <> SPACE.
CONCATENATE 'RQPAS-MASSEINHSW(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-MASSEINHSW. " '%'
ENDIF.
IF WA_TABCTRL2-SOLLWERT <> SPACE.
CONCATENATE 'QFLTP-SOLLWERT(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-SOLLWERT." '10'
ENDIF.
IF WA_TABCTRL2-TOLERANZUN <> SPACE.
CONCATENATE 'QFLTP-TOLERANZUN(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-TOLERANZUN." '5'
ENDIF.
IF WA_TABCTRL2-TOLERANZOB <> SPACE.
CONCATENATE 'QFLTP-TOLERANZOB(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-TOLERANZOB." '15'
ENDIF.
IF WA_TABCTRL2-DUMMY10 <> SPACE.
CONCATENATE 'PLMKB-DUMMY10(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-DUMMY10." Info Field 1
ENDIF.
IF WA_TABCTRL2-DUMMY20 <> SPACE.
CONCATENATE 'PLMKB-DUMMY20(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-DUMMY20." Info Field 2
ENDIF.
IF WA_TABCTRL2-DUMMY40 <> SPACE.
CONCATENATE 'PLMKB-DUMMY40(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-DUMMY40." Info Field 3
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '1501'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENT1'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-QMTB_WERKS'.
PERFORM BDC_FIELD USING 'PLMKB-VERWMERKM'
WA_TABCTRL2-VERWMERKM.
PERFORM BDC_FIELD USING 'PLMKB-QPMK_WERKS'
WA_TABCTRL2-WERKS.
PERFORM BDC_FIELD USING 'PLMKB-QMTB_WERKS'
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
CONCATENATE 'PLMKB-MERKNR('LV_IDX2')' INTO LV_FNAM.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
LV_FNAM.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=QMAM'.
PERFORM BDC_FIELD USING 'RQPAS-ENTRY_ACT'
'1'.
IF LV_IDX2 = 1. " If first entry select it
CONCATENATE 'RQPAS-SEL_FLG('LV_IDX2')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
'X'.
ELSE.
LV_IDX = LV_IDX2 - 1. " Deselect Previous entry ans select current one
CONCATENATE 'RQPAS-SEL_FLG('LV_IDX')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
CONCATENATE 'RQPAS-SEL_FLG('LV_IDX2')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
'X'.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0160'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=QMBW'.
PERFORM BDC_FIELD USING 'PLMKB-KURZTEXT'
'Description'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-QERGDATH'.
PERFORM BDC_FIELD USING 'PLMKB-QERGDATH'
'01'. " Quality Certificate
ENDIF.
LV_IDX2 = LV_IDX2 + 1.
ENDLOOP.
ENDON.
ENDLOOP.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RQPAS-ENTRY_ACT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=QMBU'.
PERFORM BDC_FIELD USING 'RQPAS-ENTRY_ACT'
'1'.
CALL TRANSACTION C_QP01 USING ITST_BDCDATA
MODE C_A UPDATE C_S
MESSAGES INTO ITST_MSGTAB. "#EC CI_CALLTA
ENDLOOP.
ENDFORM. " F_START_BDC
*& Form UPLOAD_EXCEL_FILE
text
--> p1 text
<-- p2 text
FORM UPLOAD_EXCEL_FILE .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FNAME
I_BEGIN_COL = 1
I_BEGIN_ROW = 2
I_END_COL = 24
I_END_ROW = 9999
TABLES
INTERN = IT_FILE_UPLOAD.
ENDFORM. " UPLOAD_EXCEL_FILE
*& Form CONFIRM_UPLOAD
text
--> p1 text
<-- p2 text
FORM CONFIRM_UPLOAD .
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = TEXT-002
TEXT_QUESTION = TEXT-003
IMPORTING
ANSWER = GV_ANS
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2.
ENDFORM. " CONFIRM_UPLOAD
*& Form BDC_DYNPRO
text
-->P_0589 text
-->P_0590 text
FORM BDC_DYNPRO USING PROGRAM
DYNPRO.
CLEAR: ITST_BDCDATA.
ITST_BDCDATA-PROGRAM = PROGRAM.
ITST_BDCDATA-DYNPRO = DYNPRO.
ITST_BDCDATA-DYNBEGIN = 'X'.
APPEND ITST_BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
text
-->P_0729 text
-->P_0730 text
FORM BDC_FIELD USING FNAM
FVAL.
CLEAR: ITST_BDCDATA.
ITST_BDCDATA-FNAM = FNAM.
ITST_BDCDATA-FVAL = FVAL.
APPEND ITST_BDCDATA.
ENDFORM. " BDC_FIELD
*& Form ORGANIZE_UPLOADED_DATA
text
--> p1 text
<-- p2 text
FORM ORGANIZE_UPLOADED_DATA .
DATA : LV_TOTROW TYPE I, " Total Records
LV_ROW TYPE I. " Row No
LV_TOTROW = 1.
SORT IT_FILE_UPLOAD BY ROW
COL.
LOOP AT IT_FILE_UPLOAD.
LV_TOTROW = IT_FILE_UPLOAD-ROW. " To find total rows
ENDLOOP.
LV_ROW = 1.
WHILE LV_ROW <= LV_TOTROW.
LOOP AT IT_FILE_UPLOAD WHERE ROW = LV_ROW.
CASE IT_FILE_UPLOAD-COL.
WHEN '0001'. " Material
TRANSLATE IT_FILE_UPLOAD-VALUE TO UPPER CASE.
WA_TABDATA-MATNR = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL1-MATNR = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-MATNR = IT_FILE_UPLOAD-VALUE.
WHEN '0002'. " Plant
TRANSLATE IT_FILE_UPLOAD-VALUE TO UPPER CASE.
WA_TABDATA-WERKS = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL1-WERKS = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-WERKS = IT_FILE_UPLOAD-VALUE.
WHEN '0003'. " Group Key
WA_TABDATA-PLNNR = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL1-PLNNR = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-PLNNR = IT_FILE_UPLOAD-VALUE.
WHEN '0004'. " Change Number
WA_TABDATA-AENNR = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL1-AENNR = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-AENNR = IT_FILE_UPLOAD-VALUE.
WHEN '0004'. " Group Counter Desc
WA_TABDATA-KTEXT = IT_FILE_UPLOAD-VALUE.
WHEN '0005'. " Usage
WA_TABDATA-VERWE = IT_FILE_UPLOAD-VALUE.
WHEN '0006'. " Status
WA_TABDATA-STATU = IT_FILE_UPLOAD-VALUE.
WHEN '0007'. " Inspection Point
WA_TABDATA-SLWBEZ = IT_FILE_UPLOAD-VALUE.
WHEN '0008'. " Sample Drawing Procedure
WA_TABDATA-QPRZIEHVER = IT_FILE_UPLOAD-VALUE.
WHEN '0009'. " Work Centre
WA_TABCTRL1-ARBPL = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-ARBPL = IT_FILE_UPLOAD-VALUE.
WHEN '0010'. " Control Key
WA_TABCTRL1-STEUS = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-STEUS = IT_FILE_UPLOAD-VALUE.
WHEN '0011'. " Desc
WA_TABCTRL1-LTXA1 = IT_FILE_UPLOAD-VALUE.
WHEN '0012'. " MIC
WA_TABCTRL2-VERWMERKM = IT_FILE_UPLOAD-VALUE.
WHEN '0013'. " Method
WA_TABCTRL2-PMETHODE = IT_FILE_UPLOAD-VALUE.
WHEN '0014'.
WA_TABCTRL2-PMTVERSION = IT_FILE_UPLOAD-VALUE.
WHEN '0014'. " Sampling
WA_TABCTRL2-STICHPRVER = IT_FILE_UPLOAD-VALUE.
WHEN '0015'.
WA_TABCTRL2-PRUEFEINH = IT_FILE_UPLOAD-VALUE.
WHEN '0016'.
WA_TABCTRL2-PROBEMGEH = IT_FILE_UPLOAD-VALUE.
WHEN '0017'. " Accuracy
WA_TABCTRL2-STELLEN = IT_FILE_UPLOAD-VALUE.
WHEN '0018'. " Unit
WA_TABCTRL2-MASSEINHSW = IT_FILE_UPLOAD-VALUE.
WHEN '0019'. " Target Value
WA_TABCTRL2-SOLLWERT = IT_FILE_UPLOAD-VALUE.
WHEN '0020'. " Lower Limit
WA_TABCTRL2-TOLERANZUN = IT_FILE_UPLOAD-VALUE.
WHEN '0021'. " Upper Limit
WA_TABCTRL2-TOLERANZOB = IT_FILE_UPLOAD-VALUE.
WHEN '0022'. " Info Field1
WA_TABCTRL2-DUMMY10 = IT_FILE_UPLOAD-VALUE.
WHEN '0023'. " Info Field2
WA_TABCTRL2-DUMMY20 = IT_FILE_UPLOAD-VALUE.
WHEN '0024'. " Info Field3
WA_TABCTRL2-DUMMY40 = IT_FILE_UPLOAD-VALUE.
ENDCASE.
ENDLOOP.
LV_ROW = LV_ROW + 1.
INSERT WA_TABDATA INTO TABLE ITST_TABDATA .
APPEND WA_TABCTRL1 TO ITST_TABCTRL1.
APPEND WA_TABCTRL2 TO ITST_TABCTRL2.
CLEAR :WA_TABDATA,WA_TABCTRL1,WA_TABCTRL2.
ENDWHILE.
ENDFORM. " ORGANIZE_UPLOADED_DATA
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
Free all internal tables
FREE: ITST_TABDATA,
ITST_TABCTRL1,
ITST_TABCTRL2. -
Archiving Inspection Lots – Status ARBL
Hi
I’m busy setting ARBL status on Inspection lots using program RQRQAB00.
These Inspection Lots are very old but all of them contain status UD or LTCA.
The problem I’m facing is that Inspection Plan was deleted resulting in message “Inspection plan xxxxxxx does not exist” (Message no. QA318) when displaying these Inspection lots.
Program RQRQAB00 does not issue a clear message for not activating status ARBL. Only reason I can think of is above message (QA318).
What would be the easiest solution to activate ARBL?
Best regards
WHi Werner,
You can set ARBL by using SARA transaction and using object QM_CONTROL.
Please create a variant and schedule a job in background.
You need to execute Pre processing job to make lots ready for archiving and put them in status blocked for archiving.
Please check the pre-requisites for creating the inspection lot:-
An inspection lot can only be archived if:
· The inspection lot has been cancelled, or if a usage decision has been made.
· If the last change to the usage decision was made before the retention duration.
· All stock has been posted for a stock-relevant inspection lot.
· If the inspection lot is not used in any of the following data records:
¡ Production order header
¡ Delivery note item
¡ Transfer requirement item without a “delivery completed” indicator.
¡ Quality level
Use the following link for more information:
http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e606e462a11d189000000e8323d3a/content.htm
BR
Rahul -
Hi,
My users have just "deleted" certain inspection plans. They marked the plan with the deletion flag. How can I take the deletion flag out of it.
Please this is very urgent!!!!!!
Charlinehi
if you have put the deletion flag it is possible reove it.just go to inspection plan in change mode (QP02),press the header details then remove the deletion flag indicator.
if you have run the QCR6 without archiving then it is not possible to revoke it
kindly refer the following link
http://help.sap.com/saphelp_47x200/helpdata/en/ce/fa9066f0bc11d283d60000e829fdb3/content.htm
regards
thyagarajan -
Automatic Results Recording for Inspection Plan
I'm trying to activate automatic results recording, at the beginning I get this meassage: "In customizing for default value of inspection type(400) you have to activate the following check boxes, " check characteristics", "Inspection with task list" & "Automatic assignment", I've done that. Yet, it sill doesn't work and the lot status is "CRTD" however it should be updated to "REL" status.
Hi,
Did you search enough before posting this query? There is plenty of discussions over this matter.
Based on the details given above, I don't think you have created an inspection plan.
Automatic assignment will assign the task list automatically to the inspection lot once it is created. You didn't mention if you have created one or not. Pl check that.
If the inspection plan is created, there could be possibility that material is assigned to more than one task list (inspection plan). If that is the case, you wouldn't get inspection lots with REL status but CRTD only.
ntn
Maybe you are looking for
-
How to declare ftp in File class. I want to display filename of file in FTP
How to declare ftp in File class. I want to display filename of file in FTP server. I try File f2= new File("ftp://abc:abc1111@ABC/file"); String n[] = f2.list(); System.out.print(n[0]); Vector filename =
-
Reversing a journal entry through API
Hello All, Can anyone please tell me what is the API for reversing the journal entries. When I searched I found that there is an API XLA_JOURNAL_ENTRIES_PUB_PKG for reversing journals, but I could not find any procedure inside it for reversing the jo
-
Many of my pre view photos are becoming pixelated. Only psd & jpeg not my raw files. once they are opened everything is ok. Anybody know what this is about?
-
Unable to view purchased books
Since the update to iOS 6 I only get a blank screen when I try to view my purchased/preordered books in the book store. Individual books if I search are fine. I would really like the list back. Using iPad 2
-
WINDOWS 7 DOES NOT INSTALL ON MY MACMINI HELP!!!!!!!!!!!!!!!! PLEAE!!!!!!!!
Hi people, just purchased a mac mini, very good, i have brought windows 7 home premium. i went to install this via bootcamp, followed all the procedure and when i get to the bit where its says install the disc, when putting the disc in, it thinks abo