Inspection point results on characteristics tab QA11

When you use multiple inspection points standard SAP shows the average of the results on the characteristics tab in transaction QA11. Is it possible to see all separate results instead of the average?

My client wants to view all the separate results when maken the ud. I think the best way to do this is to click on the Charac data button.
Edited by: Maarten_m4 on Jan 12, 2011 8:31 AM

Similar Messages

Runtime error for Inspection Point Results Recording

Hi,
I am changing the already done Results Recording for using already used Inspection Point.
I am getting the runtime error. Anybody came across such error?
Regards
Ramakanth

Hi,
In the in-process inspection I am using Inspection Points. Initially I have done Results Recording once with quantities.
And then again I wanted to change the quantities for the same Inspection Point. So, I went to Results Recording for same Inspection Point and changed the quantities and saving. At this event I am getting Runtime error.
I have even deactivated one BADI INSPECTIONLOT_UPDATE and tried again. Even then I am getting same error.
Ultimately my requirement is this:
My client wants UD at operation level. They want only quantity which is accepted in Results Recording to be moved to the next operation. In the operation level confirmation the system should only accept the quantity which is accepted in Results Recording.
Any suggestion in this regard.
Thanks
Ramakanth

Inspeciton point results

can any body done inspection points results through bapi or bdc
is it possible against inspection point results recording becuase here process order is monthly so month start day they raise the process order against process order 03 inspection lot will trigger based on the lot i maintain the point like ( location shift date and time ) so every shift they check the Moisture content and another critical characteristics.
can any body done kindly guide me how we are uploaded inspection characterstics.

not sure but explore bapi
BAPI_INSPOPER_RECORDRESULTS

Change results in Inspection Point

Dear All,
I did the results recording using qe51n for three inspection points in one lot. i also did the force completion and the status is in 5. Now i want to change the result in one inspection point. How do i do that?
QA22 or QE71 doesnt do it?
Regards,
DTD
Edited by: TMDTDSL on Aug 17, 2009 8:18 AM

There would be Tab called Assigned Inspection Points, when you are doing Results Recording. Click on that TAB you will get to select the Inspection POint for which you want to record again and ther on you can Unlock and change the results.
To reach up to this, right click on the already assigned inspection point and you will have the option, as suggested above

Multiple result recording for Manual inspection Lot using inspection point

I want to record inspection result for inspection type 89 against *inspection point*. Then I create new inspection point and assign it in quality plan. Then I have done the multiple result recoding against one manual inspection lot in DEV server. But when it is going to QAS server then error is coming during result recoding. Error is "The results transaction cannot be used for
inspection" Message no. QE094.
Plz give me the solution to record the result.

Reason is very simple : the the inspection point definition in the task list header is incompatible with the sampling procedure assigned to the characteristic.Make sure that you select the appropriete radio button in QDV1 while creating sampling procedure and assign the same against each of the MIC's in the task list.
Make sure that the sample tab in QA02 is pressed while assigning the inspection specification & status of the lot is REL

QM Inspection Points

Gurus
I require that inspection points should be created automatically for inspection lots when i view QA32
To do so i have done settings in SPRO > QM > Quality Planning > Inspection Planning > General > Define identifier.
Here i kept 2 under field Time for field combination 150 assuming system will create inspection points every 2 hours automatically but i cannot see inspection points created
Where am i missing? Please reply
Regards

Dear,
Have have to assigned inspection characteristics in routing that will be your in process inspection
When you Release the order the inspection lots will be generated.
Please maintain the Quality management Inspection point on the operation details and select time related. For Inspection point completion select Quantity, Valuation and Confirmation(Production).
mention the time as 1 and unit a HR (Hour).
You can record the results for every hour.
But if you are not doing inprocess inspection & inspection with GR in that case you have to create insepction plan for material assign inspection type as 04 in material master
Now for hourly analysis this you can enter by selecting scope not fixed & single value in master inspection characteristics
You can enter time & other deatils of sample by using inspection point in inspection plan.
Or else QAPP_CUST_IP_CREATE for generation of automatic inspection points.
Then it will work for you.
Regards,
R.Brahmankar

Automatic Inspection points...

Hi,
There are two operations in routing and inspection will be done at each operation hourly. When the first operation is rejected material will be scrapped / re-worked. I attached in-process inspection (03 inspection type) to material master.
Attached inspection points 150 at routing header and at the operation details I checked the u201CTime-Relatedu201D radio button. I assigned TFac = 1 Hour.
When I create a production order system generates in-process inspection lot. However, I am unable to generate hourly inspection points for both operations. Please advice how to carryout hourly inspection at both the operations? Does these inspection points get generate automatically ? If so how to set up for automatic inspection points generations ?
Am I following the right steps to perform hourly inspection? Is there any other way to handle this process ?
Please advice
Many thanks
Regards
S

The characteristics tested at operation 10 and operations 20 are different. For example, if diameter is measured at operation 10 then if diameter is not ok the manufacturing stops at operation 10.
If diameter measurement at operation 10 is OK then operation 20 will be performed. The characteristic viscosity is measured at operation 20. If viscosity is OK at operation 20 then further operations in the routings are executed else manufacturing stops at operation 20.
If any issue identified at operation 10 or 20 further execution of operations will be stopped and some actions are taken to improve the process.
When I assigned inspection point 150 to routing header an inspection lot ( 03 type) is getting created. When I click on u201CResultsu201D in QA32 system is asking me to enter the u201CPartial quantity no.u201D.
In QE71 I see an two inspection lot created for each operation (same inspection lot number for both the operations). When I save QE71 after entering Partial quantity, Validate Inspection point and Result system is creating another inspection point.
However, the new inspection point is getting created only when I save the first inspection point. This process is not happening automatically. I would expect system to create inspection points automatically for every hour.
I may need to work with technical guys to enhance the functional module QAPP_CUST_IP_CREATE for automatic creation of inspection points.
Please advice if there is any other way to map this scenario.
Many thanks
Regards
S
Regards
S

Quantity based Inspection points

Dear Gurus
In the master recipe,i assigned inspection points (Insp. Points 150 Generated insp. point, quantity or time) and characteristics also assigned in that operation(for QM control key QM02). My requirement is each 50kg i want a inspection lot but in the master recipe & process order operation details no such Quantity entering field is not there. How can i get this?...
Note : 03 inspection type also activated in the mat master

Dear Anupama
Inspection point doesnt mean that you will get 5 inspection lots. Inspection point means you will get option for entering results 5 times through points. you can get the points through QA32> Result recording> Pop up> click on Assigned inspection point. You will get the list of inspection point> click on any one of them it will take you to result recording
Hope this is clear
Regards
Gajesh

Inpection point results table- sample size- FIX-1

I am having some single reading result recording (sample size- FIX-1) in my in process inspection.
But I am unable to find the right tables where these informations are stored.
I checked in QASE, but no readings are available. In QAMR table it is showing mean value of all my in process readings only.
Which table will provide seperate readings which I entered during in in process inspection. Or inspn point wise readings table.
Thx in advance
Viny

Dear Jaison
Please search out from the following tables :--
Results Recording QAES Sample unit table
Results Recording QAKL Results table for value classes
Results Recording QAMR Characteristic results during inspection processing
Results Recording QAMV Characteristic specifications for inspection processing
Results Recording QASE Results table for the sample unit
Results Recording QASR Sample results for inspection characteristics
Results Recording QASV Sample specifications for inspection processing
Results Recording TQ12 Ind. external numbering for test units in results recording
Results Recording TQ12T Texts for the ind. for ext. numbering of units to be insp.
Results Recording TQ70 Control table for results recording
Results Recording TQ70C Function codes for navigation from the char.overview screen
Results Recording TQ70E Screen-based processing tables
Results Recording TQ70F Navigation during results recording
Results Recording TQ70S Characteristic overview screen for results recording
Results Recording TQ73 Origin of results data
Results Recording TQ73T Texts for origin of results data
Results Recording TQ74 Recording configuration
Results Recording TQ74T Recording configuration
Results Recording TQ76 Processing status of inspection characteristics
Results Recording TQ76T Texts for the processing status of insp. characteristics
Results Recording TQ77 Attributes for the Inspection Characteristic
Results Recording TQ77T Text Tables for Attributes
Results Recording TQ78 Status-dependent processing table for insp. characteristics
Results Recording TQ78T Texts for the status-specific proc. table for insp. char.
Results Recording

Goods receipt with inspection points

hi
my business process study reveels the following scenario
i need to do goods receipt inspection with inspection points
means the finish product say rice
i given paddy to the miller as a subcontarcting
iam getting rice as out put
i need to record inspction results on inprocess as well as at finish product
ie while processing from paddy to rice i will made timely inspection points and want to capture the result
and for final rice also i need to do inspection
how to achive this
if i chhose inspection type 04 and freeinspection points
system not accepting
plz suggest
sasikanth

For my proposal you use 04 inspection lot with early creation of the inspection lot.
Create an inspection plan with the proper usage for inspection type 04.
Select free inspection points in the header of the inspection plan.
Assign your characteristics. Release the plan.
Create and release your order. You should find an 04 inspection lot for it.
Select the lot, most work list will give a pop-up showing the two operations. Double click on the first one. Then you should get a pop-up asking for the inspection point identification. Enter in what ever you've set it up to require.
Record the results. Repeat previous step as often as you need to.
Craig

Automatic valuation of inspection point for physical samples.

Hi,
My requirement is after recording results (QE11) for each and every sample, automatic valuation of inspection point to be done.
Inspection point valuation not done automatically even though I have created the required details in inspection Plan.
I have maintained the following details in inspection plan
In Inspection plan header:
Inspection Point : 200 & Sample Drawing Procedure
In Inspection Plan Operation Details:
Insp.Point Completion: Automatic valuation based on inspection point definition.
Is there any settings to be done in customiszation.
Please help me to solve this issue.
Thanks & Regards
V.Devaraj

Hello Sap-Guys.
I am facing the same problem, and I did several workarounds, to evalueate the inspection point by myself.
The problem is this :
We are using RFC-techniques to evaluate samples.
Shortly, there is an inspection , which is defined, to be per point, consisting of two user fields, date and time. There must be three things (characteristics )controlled, two manually, by the workers, and the third will be calculated internally by sap via formula.
The rfc-possibilities are provided by myself, building a rfc-enabled z-module, which calls some SAP-BAPIS, from which one is called
BAPI_INSPOPER_RECORDRESULTS
Until now I do not think, it behaves like tha sap-gui.
Am I doing something wrong, or does this module really not behave like the sap gui ???
If I evaluate the very first char , I check, whether this is the only one for this actual inspection point.
If so, I delete the code groups, if any, (only quantitative evaluation til now ) and the point stays grey, ok, because there are still two other char-evaluations missing.
If my char to evaluate is not the first, then I check, which are stil left, AND , if there are any left without evaluation, I also erase code and codegroups ( if any ) in the insppoint structure, so the char gets its evaluation and the point still stays grey.
But if there had been already any evaluations, I manually check , whether my actual value meets the tolerances, and then I manually tell the inspection-point structure, which code must be used, in order to set its own state correctly.
This means, if my actual sample meets the tolerances, and only one sample was rejected , I tell the inspection point, to stay red, by setting the approoriate code manually from qplak.
If all others were ok, but the actual evaluation ( calculated manually again, tolerances ... ) is not ok, then i tell the inspection point structure, to get "red".
I do this every time, a evaluation takes place, and it works nice for simple values.
And here is my big Problem :
My last characteristic of the three to be evaluated, must not be evaluated by the workers, but BY calculation inside sap, BECAUSE IT HAS A FORMULA.
Especially for this case I left a comment in my code, and now this case occurred.
So, what could be a better approach , to use this bapi, AND trigger automatic inspectionpoint evaluation WITHOUT MY ENTIRE WORKAROUND ( where I now see, that it cannot deal with formulas ) ???
( It could, if I debugged deep enough, to check, how it builds the formula ) , but bapis are there to use them.
Aren`t they???
Could anybody give me a hint ?
Thx and best regards
R.Dornfeld

Different MICs for Inspection points

How can you do if you like to have different inspection characteristics for different (freely-defined) inspection points. E.g. if you take a sampl (sampl 1) by using freely-defined inspection ponits and test 5 differnt MICs, then 10 minutes later you pick another sample (sampl 2) out of your production and there you only need to inspect 3 MICs. How can you set this up?

Hi ,
Better create different operation in routing & then assign different MIC s to different to operation .I think that will be better option
( Aster 5 mins you are going to check only 2 MIC then that will be 1 opoeration ,Then after 10 mins you are checking 5 MICs then that will be 2 nd operation like wise you can check & take result of different sample at different stages.
Regards
SANIL

Inspection Point table

Dear All,
we are in the process of automating the results recording process using a Z program. For the results recording i have used Inspection points. What i mainly want to do is from several characteristics, Initially record results for one inspection characteristic and later record results for a different inspection characteristic. In the STD SAP this allows to do. What i want to know is since i use the Inspection points, what are the tables that will be used?
Thanks and Regards,
DTD

Hi
Hope these details will help you
QALS Inspection lot record
QAPP Inspection point
TQ79 Table with inspection point/user field combinations
TQ79T Key words for inspeciton point user fields
QAMR Characteristic results during inspection processing
QAMV Characteristic specifications for inspection processing
Regards
Charith

Creation of multiple inspection points

Hello experts,
I try to figure out how to create multiple inspection points for one operation at process order release.
It means that the release of the process order triggers:
- inspection lot creation (lot origin 03)
- inspection points creation for operation with inspection characteristics assigned to it
In the recipe header, I entered inspection points = 150 - generated inspection point, qty or time
(module function QAPP_CUST_IP_CREATE is activated for "automatic creation of insp. points")
In the operation header, I select time related -and enter 1 HR
However no inspection point is created at process order release. Only inspection point identifier is created automatically when I select the next inspection point in TR QE51N.
Do you have any tips on the subject ?
Thanks in advance
Best regards
Amaury

Dear Amuary
Doubt if there is any solution in standard. Use exit so that thr first 3 inspection points gets activated quickly. Try these exits
QAPP0001
User exit QAPP 1 (create inspection point)
| QAPP0002 |User exit QAPP 2 (create inspection point & other data)
Regards
Gajesh

Object Link to Inspection Point (QAPP)

I am trying to set up a new obejct link to an inspection point. So, to start with I am trying to create a bespoke screen that will perform exactly as screen 204 the Equipment master object link.
I have created two new screens SAPLCVIN 9000 and SAPLCV00 9000 by copying SAPLCVIN 204 and SAPLCV00 204. I have assigned these screens to the new object type QAPP and assigned this to the document type. I have copied the EQUI settings in the Key Fileds table and assigned them to QAPP.
I have also copied the function module OBJECT_CHECK_EQUI into OBJECT_CHECK_QAPP but have not yet made any changes to the code in this function module. When I try to view the new screens in CV02N I get a short dump telling me that DYNPRO 9000 is not found.
Presumably this is because I haven't made any code changes to the function module. At this stage I haven't even changed any of the fields from screen 204 I'm just trying to eliminate the abap dump. Can anybody help me with this please?

1. Copy FM QAPP_CUST_IP_PROPOSAL and use this in your inspec. point identire conguration in the Default for user fields in results recording. You have to provide all the logic in the FM to identify the next serial number. You can also us a copy of the FM QAPP_CUST_IP_CHECK in the verification of user fields to check to make sure the serial number wasn't already specified in an earlier lot is the next in the series. Again, you have to put in the correct logic.
2. I think you are looking for the drop down list in this question. Use FM QAPP_CUST_IP_F4 for this. You can either develop a new new FM for each inspec point identifer you use, and hard code the values into the FM, or create a Z table that your FM references to look up the appropriate values for the insepction point and user field.
3. Same as number 2 above.
FF

Inspection point results on characteristics tab QA11

Similar Messages

Maybe you are looking for