Inspection results copying

Hi All,
In result recording inspection results can be copied to the actual inspection lot from an existing lot. Is this possible, if so where we have to this customizing.
Navin

Hi,
Pl go thro the forum post and doc link below
Re: Copy Inspection Results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun

Similar Messages

  • Batch results copy

    Hi all
    So if we have recorded insp results for the Bulk material, then we need the results of this batch to be copied on the 20kg, 100kg pack size materials as well, since itu2019s the same batch.
    please check and revert with your comments. Also let me know if you have any other solution on this.

    It is possible two ways. 
    1)  through QM and inspection results copy.  Are you using QM?
    2) Batch derivation:  See these links for some more info: 
    http://www.sapsword.com/home/sap-batch-management/sap-batch-derivation-1
    http://help.sap.com/saphelp_470/helpdata/en/eb/e289e3b36f6e4890da5b09a5daf8dc/content.htm
    FF

  • Copy Inspection Results of one lot to other lots at a time

    Dear Experts,
                         As per settings made under "Make Settings for Copy of Inspection Results" I am able to copy inspection results but still I am not getting what I exactly want. Below are different requirements explained in details
    1. I am not able to copy twice on the same lot. e.g. if a lot has status RREC i.e. RR has been done then if at a later time I want to copy some other results over here then it's not happening.
    In help.sap page somewhere it is mentioned that copy is possible if lot has status CALC. I want to have some configuration which I don't know for which SAP should allow the copy functionality with status RREC also.
    2. By above functionality I want to do RR for several lots collectively at a time. E.g. if I have 100 lots then with same quality results it's tedious to copy results for each one by one. Like "QA16 - Collective Usage Decision" I didn't find any similar transaction for results recording(collectively).
    3. Although my results are being copied from one lot another but MIC valuation are not being transferred given that I am not using any sampling procedure. I want manual valuation to be copied to the destination lots.
    Any valuable suggestion will be highly appreciated.
    Regards,

    Dear,
    it is not clear from your question.
    Please get more details,
    In which release you are working?
    In SPRO what special setting you made for this special case
    Inspection origin is linked with no range/TL type/insp type.
    Wher exactly you set this new configuration.
    Please let us know so that we can simulate and help you out

  • Copying Inspection results from inspection lot.

    Dear All,
    Please explain me the process of copying inspection results in QM. Following is my clients requirement:
    During receiving inspection they receive the same material in say 10 batches (coils). They want to create the independent batch for  each coils of same material for tracking mechanism, so I  don't have any option to generate that many number of lots.
    Out of this 10 lots, say there are 2 masters (mother coils). Means there are two set of characteristics only which i need to copy for 5 lots each.
    As I  learn from SDN, EA - PLM  need to be activated . But I don't know what are the  adverse effects of activating  same.
    Please explain me the process.
    Best Regards.
    Shekhar Mokashi

    Hi Shekhar,
    Refer the OSS note 855959 - Activation of Extension Sets via SPRO not successful.
    I think all your doubts regarding to this Enhancement package will get resolved.
    The big warning is given there in that note itself about implementing the EA-PLM enhancement is.....
    Once an Enterprise extension set has been activated, it cannot be de-activated by de-selecting the option in the SPRO or otherwise, because BC Set activations cannot be undone.
    Appart from that note refer the document for
    Release Notes
    SAP ERP Corporate Services
    SAP enhancement package 2 for SAP ERP 6.01.
    the link for the same is pasted here FYI.
    [Chap_04_RNCorporateService|http://www.id.uzh.ch/dl/sw/sap/upgrade/Chap_04_RNCorporateService.pdf]
    Even after this much stuff completion, you don't have your doubt cleared up then I would advice you to ask the question in [ SAP Enhancement Packages|/community [original link is broken]; forum.
    Regards with lots of good luck wishes.
    Shyamal.
    Edited by: Shyamal Joshi on Jul 26, 2008 12:19 PM
    Edited by: Shyamal Joshi on Jul 26, 2008 3:06 PM

  • Copy inspection results

    Hi,
    In QM i am trying to copy inspection results.  For that all required customizations maintained, but still
    copy inspection results option is not coming in EDIT tab of QE01 transaction.
    I have cheked the pf status for the same it is E110 and main program is SAPLQEEM  and in se41 under edit tab i am able to see the data transfer push code also +QECOPY, but it is not appearing at transaction level.
    Do i need to do any coding to activate the same.  Any help will be highly appreciated.
    Thanks a lot in advance.

    Hi,
    Are you able to see "copy insp results" in QA02 under Edit menu ?
    Ref the link for details reg copy insp results
    http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
    Regards
    K.M.Arun
    Edited by: ARUN KM on Mar 24, 2008 4:22 PM

  • SAP QM Result recording - Copy inspection results functionality

    Dear all,
    I have two queries.
    1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
    2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
    Regards,
    Manohar

    Hello Jessica,
    you could try the following bapis:
    BAPI_INSPCHAR_GETRESULT
    BAPI_INSPCHAR_SETRESULT
    Although the desired functionality was actually implemented in higher releases.
    Hope this helps you.
    Regards,
    Isabelle

  • QM: Copying inspection results to another lot

    Experts,
    has anyone experience with automatic copying closed inspection results from one inspection lot to another one?
    Rgds

    Having seen some of your other postings and queries I'm wondering if your issue can't be solved by batch derivation or batch characteristic inheritance?  These are available in 6.0.  Not sure of your version.  By using these functions, you can avoid creating a lot of your inspection lots possibly.
    You can read up on these at:
    Batch derivation: http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/7b723c4356d068e10000000a114084/frameset.htm
    Batch characteristic inheritance: http://help.sap.com/erp2005_ehp_03/helpdata/EN/3e/a6d5b1a3f5764e8274e015d5a1cee2/frameset.htm
    Craig

  • Error during copying inspection result.

    Hi All,
    While recording result with the Inspection plan where I had done settings to copy inspection result from another lot I got the error message;;;;
    Message Text
    No active implementation exists for BAdI QEC_SELECTION, procedure
    Technical Data
    Message type__________     E (Error)
    Message class_________     QECOPY (QM Data Transfer to an Inspection Lot)
    Message number________     016
    Message variable 1____     QEC_SELECTION
    Message variable 2____     
    Message variable 3____     
    Message variable 4____     
    Message Attributes
    Level of detail_______     
    Problem class_________     1 (very important)
    Sort criterion________     
    Number________________     1
    Pls guide me how do I activate this BADi
    Regards,
    Shyamal Joshi

    HI all,
    I think I will not get any response over it so closing the thread to contribute in new rule of engagement.
    Regards,
    Shyamal

  • Copy the inspection  result  from one lot to multiples lots!!

    Hi SAP expert,
    I want to copy the inspection  result  from one lot to multiples lots, currently i know how to setup  the copy to another lot(SAML Response from SAP ID Service ) , but  i dont know to do to multiples lot.
    ¿Someone can help me?
    Thank you

    First you have to customizing the functionality of Copy of Inspection Results using the following path, where you have to entry the inspection types, plant .etc., where you want to have the functionality.
    SPRO -> Quality Management -> Quality Inspection -> Make Settings for Copy of Inspection Results
    Then when you are in Record Result screen you select Menu -> Edit -> Copy Inspection Results ,
    then a pop-up window is displayed and you filled in with the inspection lot which has the results and then another pop-up window is displayed to select the characteristics that you want to copy.
    A.P.

  • Copy inspection results not working

    Dear Gurus,
    I made the settings required for copying inspection results and it is working on the QA server, but it is not working on the PROD server although I'm making the same settings. When I go to transaction QA32 and go for results recording in the required operation, I press "Edit" but I don't get the "Copy inspection results" choice.
    Any ideas??
    Regards,
    MaX

    Go through following docs
    http://help.sap.com/saphelp_dimp50/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
    Re: SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/guideline%20to%20copy%20inspection%20result%20from%20one%20lot%20to%20another.pdf

  • Reg: Copying inspection results from inspection( 04) to inspection type (!0

    Dear Friends ,
    I have configured for Quality certificate.
    At the time of delivery , the system will create an inspection lot.
    To make delivery we need to carry out RR and UD once again.
    Can we copy inspection results of inspection type (04) to inspection type 10 , as we are maintaining  the same results of inspection type (04). Also can we sit as background whenever a lot is created with lot origin(10) , automatically it has to copy the results from inspection  type 04 .
    Thanks in advance.

    HI Dear,
    As you said  , it is for COA.
    And the materials are not batch manged.
    Is there any possibility  of copying the results of 04 inspection lot to inspection type 10 lot  , which is created at the time of PGI.
    Because untill and unless RR and UD is made sales people will be not able to  make the delivery . if there are multiple lots , it takes
    time for them to carry out RR and UD.
    Thanks for your reply!!!

  • Copying inspection result

    Dear Experts,
                           In the production server copying inspection results is possible with one user ID but with another user ID it is giving error. Please let me know if there is any particular related authorization object.
    Regards
    Sunit

    Dear what is the error description and error code or else you can check the missing  authorization object by entering SU53 in error screen and check with basis guy.
    Cheers
    KK

  • Copy of Inspection Result

    Hi QM Gurus,
    I have a very specific requirement.
    If I do a goods receipt, an inspection lot (inspection origin 05) is created. (example: 05000000731 - GSM0123 - AA123456)
    The results of this inspection lot can be read via an interface and the usage decision is made automatically.
    I have created a delivery and a inspection lot is created. (inspection origin 06 - example Inspection Lot 10000019768 - GSM0123 - AA123456)
    Now I want to copy the Results with validations from Inspection Lot 05000000731 - GSM0123 - AA123456 to Inspection Lot 10000019768 - GSM0123 - AA123456 automatically.
    I do not want to select the inspection lot for copying. The system will find the inspection lot myself about Material GSM0123 and Batch AA123456.
    In SPRO -> Make Settings for Copy of Inspection Results --> What setting do I need to make in the "Selection"?
    "Recurring Inspection for Batch" - I think that is not correct
    "Data from Inspection for Preliminary Product" - But the material GSM0123 is always the same material.
    "Custom Selection of Inspection Lot" - I have to select the source inspection lot here. I do not want.
    I have no idea to solve this requirement!
    Can anyone help me?
    Thanks,
    Ulrike

    Hi Do-Wook Kim,
    I have copied the BAdI "QEC_SELECTION_300" to "ZQEC_SELECTION_300" (SE19).
    In SPRO I've created a new selection on the "Business Add-In for Selection of Results Data for Copy of In".
    In the dialog you can write an SelectionNumber with 3 Numbers:
    I could not specify a name when creating the selection, I found strange, but okay.
    After these steps I adapt the method "SELECTION".
    Now it works. Thank you so much!
    Ulrike

  • Inspection result to multiple batches

    Hello,
    For my client, I need to figure out a way to get the inspection results from QM into multiple batches. Is there a simple (standard) way to do this?
    The situation is that my client produces 3 batches at once. Samples for analysis are only taken from 1 of those 3 batches. After the analyses, at the usage decision, the values need to be copied into the characteristics of all 3 batches.
    Anyone can help me out with this one?

    Hi,
    That means you have only one inspection lot(manually created) for the production of 3 batches. But you can link only one material/one batch to an inspection lot in SAP. In your case, you can record the results for 1 batch and maintain the other batches in text field(that Inspection not required for other 2 batches).
    By the way which inspectin type are you using?
    WR,
    Sanjeev

  • QM inspection result reports

    Experts,
    How come there is never any data for QM reports such as MCXA, MCXB, MCXD, MCXI although inspection lots are available in the system?
    Is there another report that I can use to see inspection results in a table layout, e.g. list of batches on one axis, list of characteristics on another and the results?
    Thanks!
    Rgds

    Sure you can.  Simply add some of the standard characteristics to the batch class that SAP provides.
    LOBM_APO_SL_MAX     Max shelf life/maturity in sec
    LOBM_APO_SL_MIN     Min shelf life/maturity in sec
    LOBM_APO_SL_UTC     Reference time stamp of batch
    LOBM_BPRIO     Stock determination: priority
    LOBM_BWTAR     Valuation type
    LOBM_HERKL     Country of Origin
    LOBM_HSDAT     Date when batch was produced
    LOBM_KRT     waiting period of a batch
    LOBM_LFDAT     Batch determin. delivery date
    LOBM_LGORT     Storage location
    LOBM_LVORM     Deletion ind. for batches
    LOBM_MBDAT     Material availability date
    LOBM_MENGE     Batch determination sort qty
    LOBM_QNDAT     Next insp. date for batch
    LOBM_QSCORE     Qualityscore Usage Decision
    LOBM_RLZ     Remaining shelf life for batch
    LOBM_RLZ_PROZ     Req. remaining rntme in proc.
    LOBM_UDCODE     Usage Decision
    LOBM_VERAB     Availability date
    LOBM_VFDAT     Expiration date, shelf life
    LOBM_ZUSTD     Status of batch
    Not all of these are suitable to add to the batch class.  Some are designed strictly for batch search strategy classes.  There are several OSS notes out there on the use of these.  As you can see, several of these are date related.  I usually always add LOBM_HSDAT, LOBM_UDCODE,and LOBM_VFDAT.
    As you can see, the Batch number is not in the list of standard characteristics.  This can be created however.  Create a general characteristic with reference to table MCH1, field nanme CHARG and add this characteristic to your classes.  You can then use it to search and sort for specific batches just like any other characeristic in CL30n.  When displayed, the field is greyed out from user entry since it is a referenced field.
    Craig

Maybe you are looking for