Inspection Specifications from configuration for inspection type 10

Hi All,
We need the inspection specifications for inspection type 10 (Insp. for delivery to cust. (w/ order)) from the characterstic values of the Sales Order Configuration. We have done this successfully for inspection types 03 and 04.
In configuration the checkbox of "Insp. according to configuration" is not available.
Kindly suggest how to do this. We urgently need the solution.
Regards
Ramakanth

Inspection accrd. to configuration is not possible with inspection type 10/11. If you are batch managed and you maintain the same char. specifications in batch determination, you can explore the option inspection by batch option available for insp.type 10, which will get the spec. from the batch.search strategy maintained for the customer.
As of now I dont know how you can do if the above option does not work .
Thanks,
Ram

Similar Messages

Inspection Specifications from Configuration

Hi there ,
If you set Inspection Specifications from Configuration indicator in the inspection type setting (QM view material master), the system takes the configurations from the sales or production order into account when inspection lots are created, and changes or supplements the inspection specifications in the task list or material specification.
Example
When creating the sales order, the customer defines that the pH value of the product to be manufactured should be between 5.0 and 5.5. When an inspection lot is created for the resulting production order, this tolerance is then copied into the inspection.
Can anyone please enlighten me where do we maintain this customer specific requirement.(Ph value 5.0 to 5.5)
Regards
Kaushik

hi Kaushik,
The specifications are only copied into the inspection lot if there is a link between the class characteristic and a master inspection characteristic.
For more details:-
Inspection Specifications from Configuration
Use
If you set this indicator, the system takes the configurations from the sales or production order into account when inspection lots are created, and changes or supplements the inspection specifications in the task list or material specification.
The indicator only works for the following inspection lot origins:
01 Goods recipt for purchase order
03 Production
04 Goods receipt for production order
The indicator cannot be used for the inspection lot origins 10 and 11.
Example
When creating the sales order, the customer defines that the pH value of the product to be manufactured should be between 5.0 and 5.5. When an inspection lot is created for the resulting production order, this tolerance is then copied into the inspection.
Cheers
Alfred

Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

Real time configurations for derivation types in COPA

We have taken the sample operating concern by going thru the path
< IMG Activity: Controlling - operating concern - sap operating concern template >, the Quickstart S-GO operating concern template>
and configured the following derivation types by looking at the examples:
- Derivation rule
- Table lookups
- Moves
- Clear
-Customer Enhancement
Also, it would be great if some one could provide me with real time configuration of the derivation types in COPA
Moderator: Please, read the rules of the forum before posting

Hi Praveen
Rec Type for Variance transactions is already fixed i.e. C and cant be changed....
You can use Z rec types in KE21N for manual postings/adjustments.... Or during external data transfer
If you can be specific on your requirement, we can discuss further using Exit COPA0002 or 0005... But for standard transactions, you cant change the rec types
Br, Ajay M

Specific Hardware Configuration for a new ATG Project

Hi All,
We're going to setup a new ATG Project in my organisation with ATG 10.
Can you please suggest me the best Hardware configuration to setup new project?
Thanks & Regards,
Narasimha Rao D.

Hi,
I am not able to figure out which version is jboss-eap-5.1\jbosss.
Can you please let me know which version of JBoss to download mentioned in this link http://www.jboss.org/jbossas/downloads/
for ATG versions mentioned below
1)9.3 which version of jboss to use ???
2)10.0.2 which version of jboss to use ???

Location Configuration for Tax Types VAT, Excise

Hi,
Our Client has manufacturing plants, Depot Sales in different states and even more than one plant in a State with different excise registrations.
Some of the products are excisable and some are not.
The requirement is Vat payble is to calculated State wise (for all the Depot in the State) and Cenvat is calculated for each Division (for each excise registration)
For Vat purpose if i configure Location as State and wareshouse as Depot, i am able to generate the tax payment wizard, XL Reporter like purchase register and sales register by using location as state
But for CENVAT if location is selected as state only one division report (as only one ECC no. can be linked to location) can be generated, but our client has plants with different ECC nos. in the same state.
Alternatively,
If i create seperate location for each ECC no., i am not able to generate the Vat report state wise.
How to configure the Locations ?
Please suggest.
Thanks,
Kumar.

Dear M K kumar,
As per your requirement you only run Tax wizard by location.
For VAT you have not an issue.
but for excise payment not possible.
So for that if you you have two ECC No. in one state so create two location Like Maharastra1 & Maharastra2
and check accordingly.
Regards
MANGESH PAGDHARE.

ACE : Alternate configuration for NCI-TYPE-INFO only

Hi,
Is there a way to configure redirect type NCI-TYPE-INFO only - on the ACE devices ?
I need this functionality to redirect the traffic when the servers at the primary site are down and the clients still hit the content at site 1
The CSS config is
service 1
ip address a.a.a.a
active
service 2
ip address a.a.a.b
active
service site2
ip address Y.Y.Y.Y(Vip address of the remote site)
type NCI-INFO-ONLY
active
content
vip X.X.X.X
add service 1
add service 2
primarysorryserver service site2
active
source group redirect
vip address X.X.X.X
add destination service site 2
active
and similar configuration at Remote CSS.
Thanks in Advance.
Raj

Something like this should do
rserver Site1-Server1
ip address a.a.a.a
inservice
rserver Site1-Server2
ip address a.a.a.b
inservice
rserver Site2-Server
ip address Y.Y.Y.Y
inservice
serverfarm host Site1-SF
probe ICMP
rserver Site1-Server1
inservice
rserver Site1-Server2
inservice
serverfarm host Site2-SF
probe ICMP
rserver Site2-Server
inservice
policy-map type loadbalance first-match APP1-policy-map
class class-default
serverfarm Site1-SF backup Site2-SF
nat dynamic 1095 vlan x serverfarm primary
interface vlan x
ip address
access-group input ANYONE
nat-pool 1095 x.x.x.x x.x.x.x netmask 255.255.255.0 pat
service-policy input VLANX-VIPS
no shutdown
Syed Iftekhar Ahmed

Firefox 5 upgrade results in the following error message presented under details. My system is configure for any type of LAN settings since I only have dail-up connection.

Installation of FireFox 5 after deleting FireFox 3.6v results in the following error message which I cannot resolve or fix. My system is configured with IE 8v and dial-up only.
"FIREFOX BROWSER 4.0v and 5.0v
The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
* Check the proxy settings to make sure that they are correct.
* Contact your network administrator to make sure the proxy server is working."

Please try to go to tools, options, advanced, networking, settings, set "no proxy", re-try. More details here: [[options window - advanced panel]].

Characteristics for class type 001 and class 59111 - Message Re-phrased

Hi All,
Let me put in better words.
The requirement is to get the list of Characteristics that are associated with a particular Class type and Class that would be entered by the user in selection screen. I have used KLAH and KSML to establish the link and got the relevant characteristics list configured. It worked for me for most of the Class type and Class combination.
The issue is on particular class type 001 and class 59111, if I put a lookup in KSML, I don't get any records. But if we look in the configuration CL02 for the same Class type 001 and class 59111, I see a list of characteristics configured there.
Does anyone know how to fetch the characteristics on this particular case?
Thanks
Rajesh.
Edited by: Rajesh Kumar K on Jan 12, 2012 12:12 PM

Hi Sylendra,
Thanks for looking into it and replying with your thoughts.
What you have mentioned about the approach on getting the characteristcs from KLAH and KSML is exactly how I have written in my program. Ofcourse your second statement of going into AUSP to get the values for characteristics for an Object (eg: material number XXXX) is also correct.
But my issue is still on getting the relevant characteristics for the class tyoe 001 and class 59111. I need to display to user the relevant characteristics that are configured for Class type 001 and class 59111. But when I go into KSML passing the internal class number and class type, I don't get any records. If you see, I am not searching characteristic values for an object, I am searching for characteristics itself.
The question would be, why records are not maintained in KSML for class 59111 (though they show in CL03) . or there are any other tables to read characteristics...
Thanks
Rajesh.

Sign of payment is missing for update type SE3005

Hi
When I am trying to create a security transaction the following error is displayed.
- Sign of payment is missing for update type SE3005.
But, when I remove tick from the check box for CM relevant I am able to create the same. The path is CFM - TM - General Settings - Link to Cash Management - Specify update types for Cash Management.
Can someone clarify on this.
with best wishes,
Mahesh

Hi Lorenz,
Thanks for the Response. But we have not configured the Payment Reporting functionality for any of our Treasury products.
However the issue has got resolved as the configuration settings were missing in :
Treasury and Risk Management >Transaction Manager > Securities > Position Management > Securities Account Management > Update Types > Specify Update Types for Securities Account Management.
Now it has been configured for update type SAM1800.
Regards,
Eesha.

Configure another Inspection Type for Production Order

Hi QM Gurus,
I have one scenario, my client wants to have another inspection type for inspection lot origin goods receipt from production because they have this requirement that for some materials they need to have a status profile that will be active for inspection type standard 04. And there are also some materials from goods receipt from production that does not need status profile. Since the only thing that we could assign as specific status profile is to its inspection type. Hence, i need to create another inspection type for lot origin goods receipt from production aside from inspection type 04 that will create automatic inspection lots with different status profiles.I try this in configuration but no inspection lots has been made for new inspection type assigned to LOt origin 04 and also assigned in the material master inspection set-up. How will i do this???
Thanks.
Regards,
Matildo, Edsel
QM Consultant

Hello Edsel,
you can configure for example an inspection type 0401 and activate this inspection type for the inspection origin 04 in customizing. Please look at the following customizing items:
Transaction QCC3
-> Inspection Lot Creation
- Maintain Inspection Types
- Maintain Inspection Lot Origins and Assign Inspection Types
By activating the correspondent inspection type in the material master you can decide which inspection type is used. If you need both then you could think about using the exit QAAT0001 to assign the correspondent inspection type.
Regards
Isabelle

Re: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349

Reference discussion: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
With reference to the above discussion and your explanation for user EXIT QAAAT0001, it was stated that:
If you only have two inspection types, you can mark one as preferred. Then with exit use logic that if MM = 311 use preferred inspection type, if 911 use, non-preferred inspection type.
May I ask what are you refer to for MM? It seems like movement type to me, however, I can't find movement type field in the structure within the component of EXIT_SAPLQAAT_002. Appreciate if you could shed some light on this.
Best Regards,
CY
Branched from older discussion by moderator. When there are questions concerning an older discussion, please create a new discussion with reference to the older one. Thanks!

Yes.. you are correct. But with the info that is provided by EXIT_SAPLQAAT_002, you should be able to identify the proper material document in table MSEG which will have the material movement.
You can use the values of plant, batch, material number, Purchase order number, Order number, item number, storage location as well as the current date since the exit would normally be executed on the same date the material movement was done. You'd also probably only execute the logic if QKZ is "X".
Craig

Inspection type 04 should not generate Insp.lot for specific Process orders

Hi Guyes,
I Want to skip the Inspection lots generation for specific process orders of a particular material during Goods Reciept and stock should be directly posting in to Un-restricted stock.
In the material master assigned with Inspection type 04.
Please advise me the possible options to map this scenario.
regads,
Rao

In QDR1
stage 10-click on insp stage
stage 10
no. of insp : 5
new insp stage : 20
rej : 1
new insp stage : 10
stage 20 - tick on skip
stage 20
no. of skip : say "5"
new insp stage : 10
rej : 1
new insp stage : 10
Now use this DMR in Header of inspection plan of material of process order.
what this will do is after 5 inspections it will skip the next 5 inspection lots.
Make sure :
You can maintain setting for "maximum skip duration in plant level.
In QM view click on Skip & auto UD
Create variant in QA16 & run through QA17
Here in QA17 maintain the duration after which you want to take UD
Also make sure that in selected set maintain stock posting proposal for unrestricted.

Conflicting inspection types with 101 for Purch Order and 101 for Proc Ordr

We have a material that can be purchased or produced in-house. When we purchase the material, we want to inspect it with a specific inspection plan for purchased material. When we produce the material with a 101 on the process order, we inspect but we typically create the inspection lot when the process order is created and NOT with the 101 GR movement. The process order creation inspection is different from the one we want on the purchase order receipt. We also sometimes have a need to create an inspection lot at the time of a GR on the process order for this material and we have created a 901 movement type (a copy of the 101) for this. However, in IMG customizing we can not update the inspection origin assigned to the movement type. When we try to post a GR to the process order using the 901 movement we get the inspection lot linked to the inspection type for the 101 of the purchase order receipt. I would like to resolve this problem with IMG customization as opposed to using a user EXIT.

Thank you for your responses. I finally had time to test these.
The inspection as the last step in the master recipe is not an option for our process.
Activating the 04 inspection type on the material master QM view, resulted in the 101 for the process order to post into QI and to create an inspection lot. I want the 101 for the process order to post to unrestricted and NOT create the inspection lot. I want the 901 (a clone of the 101) to post into QI and to CREATE the inspection lot. I have changed the configuration in OMJJ to deactivate QM for all 101's with all blanks in special stock and 'F' in Movement Indicator. The 901 movemens have QM active. Any other ideas or settings that I need to check/change?

Incoming Certificate Request for Stock Transfer(inspection type 08)

Hi Everybody,
The system asks for incoming certificates when a material is received from external vendor(Inspection Type 01).
Can we configure the QM system such that system requests incoming certificate for material coming via Stock Transfer(Inspection Type 08) also ? If yes, please give details regarding how to do it.
Regards,
Manish.

Talk to your purchasing guru. Stock transports can also be set up to look like incoming 01 inspections. I believe it has to do with the delivery type that is assigned to the order type. Using a different delivery type wiht the order, the system will treat it as an external vendor's delivery and will create 01 inspection lots instead of 08.
It MIGHT also ask for the certificate. I won't swear to that as it was stated by the previous poster, this is controlled by the control key and that is usually linked to the purchase orders. I have known some places to use purchase orders for replenishment supply from other plants.
Craig

Inspection Specifications from configuration for inspection type 10

Similar Messages

Maybe you are looking for