Inspection type 08 not posting stock to QI

Hi Friends ,
I have activated inspection type 01,08 for a material in the sending plant and 01,08 in receiving plant also for the same material . Now when we are creating sTO for the material , then in PO the stock type is "Unrestricted" , the lot is not getting generated for the material . We have to manually change the stock type in STO to QI to generate lot
NOTE : we are creating STO by considering plants as customers and vendors .So migo is against outbound delivery .
Can anybody help ?

Dear SAP PM
If the receiving material's QM view is having Inspection type 08, after that if the material receives any stock from other material it will go to quality stock only as per std SAP.
Please check the below points
Active check box should be checked for 08 inspection type in insp setup of material master
Post to inspection stock should be checked
Check whether any other inspection types are assigned to 08 origin. If so check the preferred inspection type in material master.
Check whether the quality not active check box is checked for 309 movement type at SPRO > Quality Management > Quality Inspection > Inspection lot creation > Inspection for goods movements
Revert back in case of any queries
Regards

Similar Messages

URGENT! Idoc Message Type FIDCC2 Not Posting CO Documents

Hi Everyone,
Our company is just about to begin using message type FIDCC2 to post entries through FB60/FB65 and FB50. When you manually enter an entry through any of these transactions, an FI, CCA and PCA document are all created simultaneously. However, when posting an identical entry through message type FIDCC2, only an FI document is created. Why are the other documents not being created and is there something that I am missing from configuration or some sort of trigger that is supposed to create the other entries? Please assist as this is extremely urgent.
Thanks to all that can assist,
Pete

Hi Peter,
Is your company uses any of the profitability segment fields as well? If so how are you updating this information on to the FIDCC2 idoc and how are you generating any COPA document simultaneously. I am in the same situation and my FIDCC2 idoc updates the FI, CO, PCA components but not the COPA. I am not sure where to populae the Profitability segments on the FIDCC2 type. Please share if you have same issues in your company.
Regards
Elphick

Idoc Message Type FIDCC2 Not Posting CO Documents

Hi Everyone,
Our company is just about to begin using message type FIDCC2 to post entries through FB60/FB65 and FB50. When you manually enter an entry through any of these transactions, an FI, CCA and PCA document are all created simultaneously. However, when posting an identical entry through message type FIDCC2, only an FI document is created. Why are the other documents not being created and is there something that I am missing from configuration or some sort of trigger that is supposed to create the other entries? Please assist as this is extremely urgent.
Thanks to all that can assist,
Pete

Hi Peter,
Is your company uses any of the profitability segment fields as well? If so how are you updating this information on to the FIDCC2 idoc and how are you generating any COPA document simultaneously. I am in the same situation and my FIDCC2 idoc updates the FI, CO, PCA components but not the COPA. I am not sure where to populae the Profitability segments on the FIDCC2 type. Please share if you have same issues in your company.
Regards
Elphick

MB1B, Mvt Type 351 not posting to "stock in transit"

Hello Experts,
I have created the STO. Now I am executing MB1B with mvt type 351. When I open the material document created, I look at the financial documents, the stock value has been relieved from the supplying plant and posted to the receiving plant. I thought using the 351 mvt was to put the stock in a status of "stock in transit". Only when the receiving plant performs the goods receipt should the stock value post in their plant. Am I using the wrong mvt type or is there a setting I must do to be able to post a material to "stock in transit" status?
Thanks in advance for your help!

Hi
check follwoing links
[stock transit 351 movement type;
)Make sto with t code:me21N at receiving plant.
2)go to MIGO make goods issue agaist the above sto from the supplying plant (movement type:351)
3)go to migo and make GR(movement type:101) at receiving plant agaist material issue document no or sto
For this you need to maintain some configuration at
SPRO: MM > Purchasing > purchase order > set up Stock transfer order
check your settings at this node:
"Assign document type . one step procedure, undelivery tolerance" mention supplying plant,
receiving plant, document type and tick required check boxes
Regards
Kailas ugale

Same material with some valuation type does not post accounting documeents

Hi Experts,
For a finished goods material has two valuation types and each assigned to a different valuation class.
For example Valuation type PLANT is with valuation class PROD, Valuation type EXTERNAL is with valuatioin class RESL.
When I post any material document, accounting document is getting created only for valuation type EXTERNAL.
The automatic account determination is configured properly with both valuation classes for Transaction event key BSX.
Also the simulation of the account determination (OMWB) is showing perfect and hitting the required accounts.
Where is the setting to control this? How to make the system to create an accounting document even if the material is received/issued with Valuation type PROD?
Thanks in advance.

Hi,
I checked up this scenario and is working alright. Acc docs are created for all the valuation types.
Here the issues are:
       1. Check the configuration and master data for valuations.
       2. System is not giving any error for any material document. It means that
           the transaction is clear. Check the price for val type PLANT is not zero.
regards,
sreenivas

Movement Type 309 Not posting to the correct Cost Center

Hi,
We have changed the field status group for movement type 309 to be able to enter profit center. We maintained a cost center determination in OKB9 based on the profit center. However the system is ignoring the profit center entered in the MIGO (309) and picking the profit center from the material master.
Material Master has Profit center 40000.
MIGO posting has Profit Center 43005 which in turn has a cost center assigned to 100143005 cost center.
When we do MIGO 309, with the profit center 43005, the accounting document is posted with profit center 40000 and cost center 100140000. Can anyone tell why is it ignoring the profit center maintained in the transaction?
I also checked OMJJ and checked the "Account Assignment" box for transaction type AUM.
Thanks and Regards
Madhu Vutukuri

HI,
check SAPNET note 105024.
Best regards, Christian

Material not posted in quality and no inspection lot has been created

Dear All,
We are trying to carry out the sales return scenario . we have activated the inspection types 06 and 12 to the material how ever when we do the PGR for the returns order the returns is carried out and the stock goes in unrestricted and not in quality .
Please advice how to resolve this issue

Hi Ram,
Follow the below Customer Return procedure.
Case1.
The 06 - Inspection type is not stock relevant and also it is not possible to change bcz it is SAP std.
1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Mvt type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
2. If don't want stock for inspection and directly post to Unrestricted using MB1B with mvt type 453 Transfer posting to returns from customer to Unrest.
3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
Case2.
Inspectoin type 05 is a stock relevant inspection type.
To use 05 you must assign the 05 inspection type to the delivery item in configuration.
follow this path.
tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data,check which movement type is assigned here.
I think in your case it will be 653.
change it to 655 and try now.
hope it will work.
revert further clarification
Regards,
S.Babusingh

Make Inspection type 02 stock relevant

Hi Experts,
I have attached inspection type 02 for material ,
During material transfer from one plant to another by means of stock transfer,(STO-VB,T code ME21N-VL03N) goods issue takes place, An inspection lot is generated, which is not stock relevant, How can i generate inspection lot with stock in Quality Inspection.
Waiting for your replies,
Regards,
Nitin

Dear Nitin
02 inspection type is not stock relevant.
What is the movemenet type you are using for stock transfer. make sure that you have QM active for that movement type. you can activate this in the config
Inspection for Goods Movements
MG Path: Implementation Guide for R/3 Customizing >Quality Management >Quality Inspection > Inspection Lot creation -> Inspection for Goods Movements
regards
gajesh

Inspection lot not getting generated by Z inspection type

Hi,
I created a inspection type Z1 , copying the inspection type 01. I guess I maintained all the required configurations or conditions.
I maintained the inspection type Z1 in the QM view of a material with status Active, but I am not able to do MIGO, neither the stock type is coming as Quality Inspection automatically in both the Purchse Order creation and MIGO. As a reslut, the inspection lot is not getting generated.
I am also not able to create a manual lot but QA01, Its giving error as "Inspection type Z1 not maintained for material X" .
Thanks in advance for your valuable suggestions.
Regards
Kunal

Dear check preffered inspection type in material master QM view and do the GRN.
Check and Revert.
Cheers
KK

Inspection type problem

Hi Sap Gurus,
I copied 01 inspection type to Z013 inspection type and followed the following procedure. But while posting MIGO inspection lot is not getting created and stock is updating in unresticted use stock. But same material with 01 inspection type inspection lot is getting created. I donot know where i did the mistake. Is there any setting in MM of this?
Procedure followed:
1) Assigned inspection type in material master with active key
In customization I maintained the following procedure
1) Maintain task list usage - SPRO> QM> Quality Planning > Inspection Planning> General> Define task list usages
2) Maintain inspection type - SPRO> QM> Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Maintain inspection types (for eg Z013) - maintain the task list usage here
3) Maintain Quality inspection lot origins and assign inspection types - SPRO> QM > Inspection Lot Processing > Inspection Lot Creation > Maintain inspection lot origins and assign inspection types
4) Define default values for inspection type - SPRO > QM> Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Define default values for inspection type
Regards
Krishna

Hi,
It has got nothing to do with the MM settings. Please try the following :
1.Set Preferred Inspection Type
In the QM view of the Material Master, tick the Preferred Inspection Type Check box for Inspection Type Z013.
2.Set Default Inspection Type
In Spro --> QM --> Q.Inspection --> Maintain Inspection Lot Origins and Assign Inspection Types. For Lot 01,Var 01 ( Default Inspection Type Variant 01 ) for the Z013 Inspection type you have created.
The reason behind this is that the system must determine which inspection type to use from -
Default inspection type
Preferred inspection type
If you set the indicator for the preferred inspection type, but the corresponding indicator for activating the inspection type is not set, the system uses the default inspection type
If the indicator for the preferred inspection type is not set and several inspection types are active in the material master, the system uses the default inspection type.
Besides this; cross check following points:
1. Spro --> QM --> Q.Inspection --> Maintain Inspection Type : Exact copy of Inspection Type 01
2. Spro --> QM --> Q.Inspection --> Maintain Inspection Lot Origins and Assign Inspection Types. Include Z013 in the Inspection types for the Origin 01
3. Spro --> QM --> Q.Inspection --> Define Default value for inspection Type. Include Z013 as a copy of 01
4. In spro --> QM --> QM in Logistic --> QM in Procurement -->Define control Key
Check the Control key which is assigned the QM view of MM.It should not have Control key as 9999 which has GR Inspection Control as "Do not create Inspection Lot"
5. Check the Q- Info Record, check if due to Exisiting QM system is flagged for no Inspection
6. Check for Self Certified QM systems assigned Q-Info Record in spro --> QM --> QM in Logistic --> QM in Procurement --> Define QM Systems (Tick as Certified Systems requiring no Inspection)
Hope this resolves,
Thanks,
RKM.

STO Inspection type 08

Stock transport orders are used to move materials from one plant to other plant. However, no inspection process is performed when inventory moved between plant to plant transfer using stock transfer orders.
Materials are activated with 08 inspection type to perform inspection processes with in plant. Therefore, removing 08 inspection type may not be possible from material master. When material is received using STO system creates inspection lot of type 08. Is there a way to avoid creating inspection lot when material is received from other plants ?
The option what I thought is to create a quality info record and set "No inspection" however, this option is not possible because there is no vendor in stock transport order process.
The other option is to create an dynamic modification rule and set up skips such that system never post stock in quality when goods receipt is performed for stock transfer order.
Please recommend if there is a way to avoid creating inspection lot of type 08 when goods receipt is performed for stock transfer order.
Thanks
S

Well there is one solution available for this
1.In OMJJ make a copy of mvt type 301 ( just an example : considering your material transfer takes palce through 301 mvt) say Z01.
In QCC3--->Inspection lot creation >inspection for goods mvt>Deactivate Quality Inspection for a Movement Type->for Z01 you can deactivate QM.
You haev to use only Z01 when you carry out STO.
This will not create Inspection lot for this mvt type.But when you do transfer from storage location to storage location say with 311 it will create inspection lot of 08 as per your requirement.
I hope this males sence............

QM Inspection Type for SD Delivery in Returned Goods

hi experts,
Any ideas on how to do stock postings in Iinspection Lots that are automatically created upon return delivery
I want to post to inspection stock once the Delivery has been completed. The standard SAP automatic Inspection Lot that is created does not allow us to post to stock. pl. help
thanks in advance.
vinay

Hi Vinay,
Follow the below Customer Return procedure.
Case1.
The 06 - Inspection type is not stock relevant and also it is not possible to change bcz it is SAP std.
1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Mvt type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
2. If don't want stock for inspection and directly post to Unrestricted using MB1B with mvt type 453 Transfer posting to returns from customer to Unrest.
3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
Case2.
Inspectoin type 05 is a stock relevant inspection type.
To use 05 you must assign the 05 inspection type to the delivery item in configuration.
follow this path.
tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data,check which movement type is assigned here.
I think in your case it will be 651.
change it to 655 and try now.
hope it will work.
revert further clarification
Regards,
S.Babusingh

Inspection type for customer return of returnable package material

Hi Guys,
I send the returnable package to the customer , while reciving that material to my stock (when the customer return to me ) i want to create outbound delivery with out order refference .
I want system to create inspection lot after doing PGR of the outbound delivery .
The inspection lot sould have the option of result recording and stock posting when i do usage decission
This requirement not met by inspection type 06 , i want to create new inspection type to met above mentioned all requirement .
please provide the steps to be performed to met the same.
Thanks and regards
Thamizhchelvan G

Hi,
The 06 - Inspection type is not stock relevant and also it is not possible to change because it is SAP std.
1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Movement type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
2. If don't want stock for inspection and directly post to Unrestricted using MB1B with movement type 453 Transfer posting to returns from customer to Unrest.
3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
Case2.
Inspection type 05 is a stock relevant inspection type.
To use 05 you must assign the 05 inspection type to the delivery item in configuration.
Follow this path.
Tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data, check which movement type is assigned here.
I think in your case it will be 651.
Change it to 655 and try now.
hope it will work.
Thanks
Vinay

09 Inspection - QA07 Option to move stock in QI on Insp date

Hi Experts,
I'm having question regarding QA07 option. Just wanted to let you know I already gone through below link as well as some of SAP help document. Even I tested scenario in my system. So wanted ask question to clear my confusion.
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=217383204
Our business requirement is is Inspecton date falls in intial run days then just create an inspection lot without posting stock in QI. But when we run deadline monitoring job second time and if "next inspection date becomes today's date" then only post stock from UNR to QI. What option should I select in QA07/ QA05 to meet this requirements?
First I tested with "to inspection stock at inspection date" option but in this case if 'next insp. date' falls in initial runs then system create a lot and post stock in QI, which we don't want to do. Even this option creates an inspection lot if next insp date is future date not today's. If Next insp. date becomes todays date and lot is still open then only just post stock in QI for an open lot.
Secondly I started testing with 'Lot creation only' option. This option does create a lot without posting stock in QI. But when next insp date becomes today's date then deadline monitoring does not post stock in QI for open lot.
Don't suggest me any document to read. Just suggest acording to your exp.

Hello Eric,
System will never add QI quantity to Existing Inspection lot with status REL CALC.
But system may create new inspection lot with different variant maintained in QA07.
Please check SAP Note.
84857 - Recurring inspection;several active inspection lots.
I would like to see how it works! (or Not)
Update*: This note is not for creating new Inspection lots with different variant but for Avoiding New inspection lots if active inspection lot exist.
I misunderstood.
Amol.

Inspection type 05,08,89,F4

Dear Experts,
On which scenario i should use inspection type 05,08,89 and F4?
If anyone can provide me a business example, that will be very helpful.
Thnx in advance.

Hey!
04 is used for materials we receive from production, these are semi finished (stock relevant) and finished materials. So whenever you see 04 lot materials you know these are your in house produced materials.
05 is used for other goods receipt, ie, neither raw material receipt nor production house receipt. Like you have received some material as customer return and want to manage the stock through quality, so use 05 inspection type instead of standard customer retuen inspection type 06 (Which is non-stock relevant).
08 inspection type is related to stock transfer, Like you have moved a material from storage location A to B, so for this you need an inspection lot to be created. In that cas you will be using inspection type 08, does not matter whether your material is raw or in house produced.
89 is used for creating inspection lots manually. for 01, 04,03 and others we have a defined automated path, like whenever there is a raw material receipt 01 inspection lots will be created. But 89 lots are not automated, you create them manually in QA01 and most importantly they are non-stock relevant. We create 89 lots just to check the quality, not for stock transfer.
I hope we have cleared your doubts.

Inspection type 08 not posting stock to QI

Similar Messages

Maybe you are looking for