Inspection Type 10-Single Mat with two Diff Insp Typ with separate Char.

Hi,
I am using Inps with Mat Specs.
I have single Finished Product having Insp type 4 & 10 attached.
There are 8 char attached to Material out of first 4 should be visible for lot generated for insp type 4 and last 4 should be visible in Result recording screen for newly generated lot after doing Delivery i.e. 10 Insp type.
Is there any setting for the same.
Regards
Nilesh

There is no such provision available.You are using material specs then you have to consider 04 & 10 seperatly as there usage is different.
or simply create task list with differnt usage like 1 & 6 with specific char.this will work fine.

Similar Messages

Converting strings with line feeds to a single line with identifying chars

Hi, I dont want to re invent the wheel if there is something out there that does this already. I want to take some string with multiple
line feeds and convert it to a single line. For example:
"I want this string
to be changed to
a single line"
to this...
"I want this string\r\n to be changed tor\\n a single line"

vsekvsek wrote:
OK, Hope this will make better sense. So right now a I have a routine that loads files like below:
"TEST\r\n TEST1\R\n TEST2"It's not clear to me at this point what you mean by that string.
After the initial word TEST, does that string have a backslash character followed by an r followed by another backslash followed by an n? Or does it have a carriage return followed by a line feed. (\r followed by \n)
We format it when loading in a way that it will look like this when queriing from the DB
"TEST
TEST1
TEST2"It doesn't look like anything "when querying from the DB." That part doesn't make any sense.
Either the string has a backslash followed by an r, in which case when you render in in a text editor or on a console it will look like a single line with a visible backslash character followed by an r, or it has a carriage return (\r) in which case it will look like multiple lines when rendered in a text editor or on a console.
Later I re-extract it to a file from the DB and What confuses me is when I inspect the string it looks like this
"TEST\r\n TEST1\R\n TEST2"How are you inspecting it? If it's in a debugger or similar tool, it's not uncommon for it to be showing a carriage return character (\r) as a visible backslash followed by an r, rather than interpreting it and rendering a new line. This is so that you can see exactly what characters are in there, rather than wondering about the specific whitespace.
>
but it extracts to my file like
"TEST
TEST1
TEST2"
So I guess there are some hidden cr's or something messing it up that I need to manipulate but not sure how to apprach it?I still don't know what you're trying to do, or if you even have an actual problem with your data or are simply not understanding what you're seeing.

H323 inspect in a single class with match criteria

Hi, I trying to apply this to make sure only inspect h323 traffic in a single host (that's a Video Conference host), but don't works. Only works when I applied the inspect in the inspection_default class.
Here is the config:
access-list 100 extended permit ip host x.x.x.x any
access-list 100 extended permit ip any host x.x.x.x
class-map h223_VC
match access-list 100
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect ip-options
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect pptp
inspect icmp
inspect netbios
inspect icmp error
class h223_VC
inspect h323 h225
It´s possible? or is something wrong?
Thanks a lot for your help

Hi,
When you have it in the global policy you only H323 H225 or you also have H323 ras?
What do you see if you run this commands?
packet-tracer input tcp 1025 1720
sho service-policy flow tcp host host eq 1720
How do you test it?
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach"
http://www.cisco.com/web/partners/tools/pdihd.html

Inspection type for STO with delivery and billing , two step procedure

Dear All,
We've STO scenario between two company codes, plant '1000' of company code '1000' supplies goods to plant '2000' of company code '2000' using STO. We'd like to evaluate the supplying plant for vendor evalution with respect to receiving plant,
Please suggest , which inspection type '01' or '08' needs to be activated in the material master in receiving plant '2000' in order to consider the supplying plant ' 1000' for vendor evalution. and kindly let know me that whether the functionalities of QM procurement (Checking receipt of certificate while posting MIGO) can be used in STO scenario similar to normal procurement scenarios,
Here, we are going for STO scenario of two step procedure with outbound delivery & billing.
Thanks & regards,
rajesh

The inspection type '08' is used for stock transfer order process.
In SAP standard you can't evaluate the supplying plant but external vendor only.
Also the functionalities of QM procurement can influece or control it when materials are procured from external suppliers.
If you want to use the functionalities of vendor evaluation and QM procurement, I would suggest you implement normal procurement process, not stock transfer process.
Regards
Luke

Activating Inspection type with QI stock

Hi QM Gurus,
I want to activate Inspection Types 01, 05, 08, 09 and 89 for a material. I already have stock for 2 batches for this mateiral in QI. I tried activating Inspection Type 01using t-code QA08. I entered the Plant and Material and ticked 'Assignn Inspection type' and 'Activate despite insp. stock' on the Activate insp. type tab of this transaction but the system gives an error 'Mats. with insp. stock'. I even tried by ticking on the 'Create Change Documents' option but in vain
I also tried the Individual processing and Mass processing tabs of QA08 but faced same issue.
Please tell me how to activate inspection types for this material.
Regards,
Manish Saraswat.

Hi Manish,
Thanks a lot for your inputs. Right now the only Inspection Type which is active for this material is 89. I want to activate 01, 05, 08 and 09. As I said earlier I have stock for 2 batches in QI and there are no Inspection Lots for these batches as no Inspection Types are active.
I checked and found that InspTypeForInspStock doest has any value. Its blank.
Please advise whether the system will allow me to activate the mentioned Inspection Types.
Regards,
Manish Saraswat.

Multiple notification against single inspection lot (03 inspection type)

Dear friends
While recording the defects multiple times against single inspection lot (03type) , all the defects are added in single notification, but my client requirement is they want different notification. if any body knows please tell me.
Note : in inspection type there is a option of multiple notification against single inspection lot, but this is
not working (i think it will work only serial number,equipment and functional location get changed)
Please do the needful
Regards

Hi Karthikeyan
As you mentioned it is not possible to create notification other than based on the object types.
A work out can be make an action box in the notification for creating another notification with the help of ABAP ( call transaction QM01) and while doing this the entire datas of the inspection lot gets copied into the notification. you may have to use a user exit also.
Defect can be recorded in the item level by the user.
Sounds difficult but certainly possible
Regards
gajesh

Need title with two diff sizes fonts

creating a title over dynamic background
cant seem to create two diff sizes of fonts within the Text field of Motion version 3
change one line and the other line above, which needs to be bigger, changes as well
I could go to Adobe Illustrator for this, which I KNOW will work, but sad to have to leave the Apple app

Chris. Mistaken is not the same as clueless or silly. I did not call you either, and meant only that you had it wrong about Motion 3's capabilities.
Since there is a very specific way to do what you were asking about; one that could be confused because there is more than one way to edit a text object, I wanted to assure you that the only reason you weren't getting the right results was that you hadn't happened upon the correct procedure.
You see, unlike FCP, some procedures in Motion can only be done ONE way. For example, resizing a layer automatically as it's moved back in Z space so as to maintain its relative proportion to the camera can only be accomplished with a modifier key in the HUD. Attempting the same trick in the inspector or canvas won't get you anywhere.
When I say, "It's possible you're not going about it the right way," I mean exactly that. You are not taking the correct steps to achieve the effect you want. That doesn't mean that it can't be done. And it doesn't mean you're witless either.
I'm sorry that you feel I'm "distasteful". You seemed convinced in your earlier post that independently adjusting single letters inside a text object wasn't possible in Motion 3. Aside from hoping to HELP you by correcting your mistaken assumption, my secondary goal was to make sure that another user searching for help with the same problem might read the thread and get an answer.
Be that as it may, I will do my best to never to respond to one of your queries again. I don't give help where it's unwanted, and I certainly have no desire to take a badgering for trying.
Good luck and goodbye.
Andy

Please help with Inspection type

Hi.
I have to create a report. The input fields are material, plant and inspection type. I have to create 2 buttons to activate and deactivate the Inspection types. Inspection types are stored in the table qmat-art. Could you Pl. tell me how to do it.
thanks and regards,
bin

This preferred insp type is used only if you have 2 or more insp types created with the same origin.
Say for example you create two inspection types with similar parameters as '01' inspection type - say 11 and 12.
Now you set the insp types 11 and 12 in the material quality view. When you make 12 as preferred then when GR is done against Pur order the inspection type 12 will be taken,
Hope this clear.
What happened to your prev query regarding batch charc.
Regards
Abhay Singh..
<b>Rewrads point for helpful answer.</b>

SQL Injection, replace single quote with two single quotes?

Is replacing a single quote with two single quotes adequate
for eliminating
SQL injection attacks? This article (
http://www.devguru.com/features/kb/kb100206.asp
) offers that advice, and it
enabled me to allow users to search name fields in the
database that contain
single quotes.
I was advised to use "Paramaterized SQL" in an earlier post,
but I can't
understand the concept behind that method, and whether it
applies to
queries, writes, or both.

Then you can use both stored procedures and prepared
statements.
Both provide better protection than simply replacing
apostrophes.
Prepared statements are simple:
Set myCommand = Server.CreateObject("ADODB.Command")
...snip...
myCommand.CommandText = "INSERT INTO Users([Name], [Email])
VALUES (?, ?)"
...snip...
myCommand.Parameters.Append
myCommand.CreateParameter("@Name",200,1,50,Name)
myCommand.Parameters.Append
myCommand.CreateParameter("@Email",200,1,50,Email)
myCommand.Execute ,,128 'the ,,128 sets execution flags that
tell ADO not to
look for rows to be returned. This saves the expense of
creating a
recordset object you don't need.
Stored procedures are executed in a similar manner. DW can
help you with a
stored procedure through the "Command (Stored Procedure)"
server behavior.
You can see a full example of a prepared statement by looking
at DW's
recordset code after you've created a recordset using version
8.02.
"Mike Z" <[email protected]> wrote in message
news:eo5idq$3qr$[email protected]..
>I should have repeated this, I am using VBScript in ASP,
with an Access DB.
>

Is it possible to use a single iPhone with two contact numbers via dual sim or an app?

Is it possible to use a single iPhone with two contact numbers via dual sim or an app?
This would be a useful feature for personal and company numbers but using one mobile, rather than carrying two devices or diverting calls.

Then go ahead and try it. You'll find it's probably a load of crap.
You want 2 numbers, then use Google Voice or TalkaTone
Those are US based only Apps or numbers so no good. I won't be wasting money by just trying something either, especially because using a dual sim would mean purchasing another sim card on either pay as you go or monthly contact.

Link of material movement with inspection type

Hello Masters,
I have scenario where component at shop floor will be segregated for inspection. The requirement is to do result/defect recording for those parts and if required then those parts need to be scrapped. So one way of doing that can be to move those parts to either blocked stock or QI stock (ideal option) or to specific storage location so that planning can be taken care of (if material are still in unrestricted then planning will consider those part as OK part and planning may fail). And to record result/defect we require inspection lot, which can be created by using above mentioned material movement.
But problem is how to create inspection lot so that we can do result/defect recording for those materials and scrap those material.
Please note that material master will have QM setup active (inspection type 01 - Goods Receipt Insp. for Purchase Order) and hence we can move material from unrestricted stock to QI stock only through QM.
I am not sure if we should use inspection type 08 - Stock transfer inspection, as there can be many instances of material transfer within plant. And with inspection type 08 active, system will create inspection lot every time there is any material transfer.
One way can be to create new goods movement only for this kind of transfer and new inspection type and link both together. So that when ever material is transferred using that particular goods movement, system creates inspection lot as well as material will be in QI stock. But I am not sure how this is possible or not and if yes then how this can be done.
I know query was too long to read and I think I was clear enough to explain what the requirement is.
It would be great if I can get some guidance from you masters at the earliest convenience as it is bit of importance.
Thanks and regards,
Devang

Hi Devang,
I guess this is Line rejection scenario. Correct me if understanding goes wrong. You have okayed the material against 01 inspection lot and UD has been given. Now you find this material defective on shop floor.
I think the 2nd option suggested by marwadi sounds better. I suggest one more possibility, just check whether feasible.
1.     Create quality notification Q2 type through QM01. While creating you can give references of original PO and material document, which fetch vendor name and material code automatically.
2.     Record defects and all other required information in notification.
3.     After this, you find an option in action box, transfer post unrestricted - >block . Click there. This will transfer the stock from unrestricted to block.
4.     If you want planning persons should not consider this stock as OK, remove block stock from MRP stock availability check. As a result of which stock lying in block will not be considered as available stock.
5.     From block stock you can send this material back to vendor through MIGO. Otherwise you can create return delivery from notification through action box also. Check what is feasible in your case.
Here you need not create inspection lot, no need to use any user exit.
Regards,
Anand Rao

Conflicting inspection types with 101 for Purch Order and 101 for Proc Ordr

We have a material that can be purchased or produced in-house. When we purchase the material, we want to inspect it with a specific inspection plan for purchased material. When we produce the material with a 101 on the process order, we inspect but we typically create the inspection lot when the process order is created and NOT with the 101 GR movement. The process order creation inspection is different from the one we want on the purchase order receipt. We also sometimes have a need to create an inspection lot at the time of a GR on the process order for this material and we have created a 901 movement type (a copy of the 101) for this. However, in IMG customizing we can not update the inspection origin assigned to the movement type. When we try to post a GR to the process order using the 901 movement we get the inspection lot linked to the inspection type for the 101 of the purchase order receipt. I would like to resolve this problem with IMG customization as opposed to using a user EXIT.

Thank you for your responses. I finally had time to test these.
The inspection as the last step in the master recipe is not an option for our process.
Activating the 04 inspection type on the material master QM view, resulted in the 101 for the process order to post into QI and to create an inspection lot. I want the 101 for the process order to post to unrestricted and NOT create the inspection lot. I want the 901 (a clone of the 101) to post into QI and to CREATE the inspection lot. I have changed the configuration in OMJJ to deactivate QM for all 101's with all blanks in special stock and 'F' in Movement Indicator. The 901 movemens have QM active. Any other ideas or settings that I need to check/change?

Automatic UD for the in-process lots with 03 inspection type

Kindly provide me the list of steps to perform the Automatic UD for the inprocess lots with 03 inspection type.
AYK

Hello,
please find the steps
1) QA41
2) Create variant - give a name to the variant
3) click on create
4) give the plant
5) condition for orders.
6) Usage decision catalogs(selected sets, UD code , code group, UD plant)
7) Save with a variant name
8) Shedule as u do normaly
Hope this helps
Regards
Gajesh

How to configure inspection type with serial number

Dear all..,
Please guide me how can i proceed serial number congifuration for inspection types. & is there any procedure to active seperately to have control in serial numbers.
if, any setting need to be done please guide me with procedure.
Thanks,
Kiru.S

hi,
Active Serial number in SPRO- Qaulity anagement- Quality Inspection- Inspection type and Default values of inspection type.
than goto IQ01 for serial number and than assign it with material .
Regards

Set preferred inspection type checkbox with mass processing

Hi all,
I have a requirement for processing the "Preferred inspection type"-indicator in the QM-view of the mateiral master (Field APA from table RMQAM) with some kind of mass processing tool like for instance LSMW.
I have used QA08 for creating the inspection types in the materials, now i need to indicate the preferred inspection type which is not possible with QA08.
My issue is i do not see any standard objects in LSMW that can do this and i cannot find any standard MASS transactions which can help me.
Please help!
Kind regars,
Dag

It is possible with QA08.
In QA08, enter your criteria. Then if you click on the tab Mass Processing, enter in the inspection type, then when you click on execute, the pop-up window of the settings comes up. Here you can click on the preferred tick-box for the inspection type. Once you do so, click the green check mark and you'll get a list of materials that met the criteria you enterred on the initial screen. Select the ones you want to change, (or click on Select all icon), then click on Save icon.
Your materials should be updated with the preferred status. No need for LSMW.

Inspection Type 10-Single Mat with two Diff Insp Typ with separate Char.

Similar Messages

Maybe you are looking for