Inspection type and movement type

how is the movement type related to the inspection type? i.e. when doing a UB_stock_transfer order, what movement type it uses and to what inspection type it assigns? also what other movement type uses the other inspection type?

Hello Cedrick
first you need to maintain the view Quality Management for your material. Inspection type assignment to movement type you can see on the following customizing path: Quality Management -> Quality Inspection ->Inspection Lot Creation -> Inspection for Goods Movements
Hope this helps.
Michael

Similar Messages

Condition Type and Movement Type

Dear all,
Could anyone explain how the relationshipship between condition type and movement type are being maintain?
Example : WE03 and Mvt 101,
WA03 and Mvt 201.
Is there any table or tcodes to view these relationship?
Thank you.

Hi
Both are linked based on the Transaction event type.
for GR movements the transaction even type is WE
For GI Movements the transaction event ype is WA.
Thanks & Regards
Kishore

Purchase Order Type and Movement Type in MIGO

Hi
Is there a way to have a movement type automatically posted in MIGO for different Purchase Order Document Types?
THanks

Hi
If i understand correctly you want to post a single GR pertaining to 2 different PO's that are created.
If that is the case, I think you cant even post GR for different PO's in a single MIGO.
Thanks
Kalyan

Inspection and Movement types...

Hi ALL,
Where can we find that for a particular inspection types what are the movement types assigned....
i.e. for eg : Inspection type '04' has movement types '101,261...etc assigned...Where do we assign these?
Thanks
Regards,
Ameya K.

Hi Ameya
It's not a straight forward assignment.
Inspection Types are assigned to Inspection origins.
Inspection origins are assigned to Movement types.
1) Inspection Origin to Inspection Type Assignment
Quality Management --> Quality Inspection --> Inspection Lot Creation->Maintain Inspection lot rigins and assign inspection types
2) Movement type and Inspection origin assignment
Quality Management --> Quality Inspection --> Inspection Lot Creation->Inspection for Goods Movements
Best regards
Ramki

Quality Inspection for a Movement Type 103 , change batch when doing QA11 .

Hi all,
I activated Quality Inspection for a Movement Type 103 . When do MIGO(GR 103) reference to PO ( include material A, qty 100 PC), it will create insp lot. Material A needs batch management.
1st time use QA11 to post 50 PC to stock, it will create a new batch( or you can select a exist batch ).
2nd time use QA11 to post another 50 PC to stock, it will use the batch 1st time used, and you can't change this batch number .
The question is : how to change batch number at the 2nd time ?
Thanks.

Hi,
Pls. check that how u have configured the new batch number in configuration for goods movement.

Initial Stock Upload T code MB1C and Movement Type 561through LSMW - Error

Hi,
Trying to Upload the Initial Stock, Transaction Code MB1C and Movement Type 561 through LSMW.
While recording the fileds, system giving a message of Code Block.
Please let us know about Code Block while uploading the Initial Stock.
Thanks
Siddu.

Check this thread
[Re: Coding Block in LSMW recording via MB1C|Coding Block in LSMW recording via MB1C;
thanks
G. Lakshmipathi

Creation of new movement type and condition type

Hi experts,
I am going to create a new movement type and the new condition type. Please suggest me how to create and implement it.
Thanks
Harmandeep

Please check these answered links:
Create a new movement type
Create Movement Type Error
When we need to create a new movement type?
can we a create a condition type for PO
Create new condition type with respective GL acc. for PO
Re: Condition type

Debit/Credit sign settings of item and movement type usage

Dear BCS Experts,
According to your experience, where are Debit/Credit sign settings of item and movement type used in BCS? As I know, they can be used during data collection. Any other thoughts?
Thanks.

Actually, Barry, I recognised that that was not a doubt regarding BCF. It was (and still is) a doubt about the MoveType sign for that values that are generated automatically during the CoI activities.
Since the decrease/increase for such activies is defined, there is a question if the sign of these MoveTypes may interfere with the amounts or the side to be placed in (debit or credit).
Do you have experience in this?

Account Determination and Movement type

Hello Experts,
From SD course, we know that account determination is Account Key + Account assignment groups for customer and material respectively + Sorg + COA.
So, what does it mean by this definition of Movement type:
"The movement type is a three-digit key used to differentiate between goods movements in the R/3 System. Examples of these goods movements are goods receipts, goods issues or transfer postings It plays a central role in Automatic Account determination"
regards
Pascal

From SD course, we know that account determination is Account Key + Account assignment groups for customer and material respectively + Sorg + COA.
This is related to revenue account determination. Normally carried out by SD personal using t.code VKOA.
The movement type is a three-digit key used to differentiate between goods movements in the R/3 System. Examples of these goods movements are goods receipts, goods issues or transfer postings It plays a central role in Automatic Account determination
This is related to inventory account update (quantity/value]. For example, when a goods issue is made, the value and quantity in the stock account needs to be reduced. The G/L account assignment is configured by MM personnel using t.code OBYC.
Regards,

Relation between Inventory Process keys and movement types

Dear All,
Is there any way to find the relation between Inventory process keys (which is in SBIW-> Settings for Application specific data sources(PI) -->Logistics -->Settings for IBU Retail / CP --> Transaction key maintenance for SAP BW) and movement types .
Thanks in advance...
Regards,
Raju

Hi,
Please read the note below.
Note 353042 - Howto: Activate transaction key (PROCESSKEY)
It has something for you ....
The process key (0PROCESSKEY and 0BWAPPLNM) of the InfoSources has not been filled. As a result, no key figures are updated because of the update routine of the participating InfoCube and along with it no records are inserted into the InfoCube. In each update routine, the system checks the content of the PROCESSKEY. If this field has no contents, then no data is written into the InfoCube because of the IF condition in the update rules.
Solution
So that you can work in the above mentioned InfoSources, you MUST activate the determination of the process key. This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Hope this helps.
Raj

Valuation class and movement type

Hi sirs,
What exactly mean by valuation class and is there any sublink to valuation class and movement type.
BSR

Hi BSR,
Regarding the meaning of valuation class and link between valuation class and movement type, you just have to understand this.
valuation class + movement type = transaction key --> GL account
explanation :
Valuation class
It is a field maintained in the accounting view 1 of Material master. This is nothing but the classification of material like Raw material, Finished goods, WP, stores & spares etc. It is indicated as numerical number.
Movement type
This is a 3 digit numerical code which is used for all material movement in MM module. Say for example movement type 101 is used for Goods receipt from vendor or from production.
Transaction Key
The combination of valuation class and the movement type translates into a transaction key which indicates the type of transaction.
remember:
The combination of Valuation Class + the Movement Type helps in determining the GL accounts automatic updates.
hope it helps and don't forget to assign points.
regards,
Lily

BAPI_GOODSMVT_CREATE with GM = 03 and Mov. type 961

Hello,
I keep running in to the same error message when test-running the BAPI_GOODSMVT_CREATE bapi with GM 03 and mov. type 961.
Although for my product MM03 says that I have 999 tones of stock for unrestricted use I keep getting the message:
"Deficit of SL Unrestr. prev. 1 T: 900253 DE01 D1CD"
can anyone understand the reason for this ?
The application consultants have no problems posting the goods movement but I keep getting the same error message no matter what quantity I try to move.
Grateful for any help on this matter !
Best regards
//Erik

Hello again,
After having changed the posting date I now have error message:
"Fld selectn for mvt type 961 / accnt 412505 differs for network (019)"
This is starting to feel like som form of customizing missing so my guess is the application cosnultants will have to look at this.
Ideas still welcome though !

Inspection type to movement type

In SPRO where do we assign inspection type to movement type..

hi,
you can not assign inspection type for Movement Type. It is always Inspection type 08 which is assigned to any movement type in standard, Provided, "QM not Active" indicator is not set in
SPRO>IMG>QM>Quality inspection>Inspection lot creation>Inspection for goods movement>Deactivate Quality Inspection for a Movement Type
Regards,
Amol

Report based upon material type against movement type for a period ?

i need a inventory report which should be based upon materil type & movement type for a particular period.
For example- for last monthe how much Raw material has been issued againast production order. i would like report to allow me ROH and movement type 261/262 and period entry. MB5B does not satisfy my requirements, ist of all there si no material type/secondly it restricts itself if i use movement types
thanks
sam

Hi,
You can create a small program to get report.
Input fields Date of posting BUDAT, Movement type BWART (Plant if required).
Check field BUDAT (Posting Date. Should check based on input date field.) In table MKPF.
If data falls in required date range. Pick MBLNR-MKPF (Mat doc number).
Go to table MSEG compare MBLNR-MKPF and MBLNR-MSEG if same pick field MATNR-MSEG (Mat number).
Go to MARA check MTART-MARA for picked MATNR-MARA (in previous step). Take the material type.
Add the below fields to out put
MATNR, MTART, BWART-MSEG (Movt type), ERFMG-MSEG (quantity posted), WERKS-MSEG (Plant received), LOGRT-MSEG (S. Loc received).
Please take advise from ABAPer regarding prog logic
Thank you,
Anand K

How could I retrieve metadata about Array Type and Table Type?

I use DatabaseMetaData.getUDTs() method for obtain metadata about Object Types, but this method doesn't work with Array Type and Table Type.

JJ,
Go into the diagrams of the DBTools List Columns and DBTools Get Properties respectively. When you inspect this diagram, you will see the raw ActiveX properties and methods called to get the size information. The value of -1 means the requested recordset is already closed. This is the sort of thing that is controled by the driver (ODBC, OLE DB, Jet, etc) you are using. Notice that you can right click on the property and invoke nodes and get more information about these specific items directly from the ADO online help.
Crystal

Inspection type and movement type

Similar Messages

Maybe you are looking for