Inspection Type for Material

Hi
I want to know wt are all Inspection types are created for Material...
Can any body help me wt is the Table name to get Inspection type Details?
Regards
Smitha

check this Link: [Link|http://forum.saptechies.com/viewtopic.php?t=1973]

Similar Messages

Activation Inspection Type of Material through BDC

Dear Experts,
Can anyone tell me how to activate the inspection type of material by using bdc or is there any sample program to do so.
I have written the program for uploading inspection type for material using bdc. But when i upload the data by default Accounting1VIEW gets selected instead of QM. What can be the reason. Help me to track the error and resolve.
Regards.
Edited by: Govinder Singh on Jan 27, 2010 12:28 PM
Edited by: Govinder Singh on Jan 27, 2010 12:29 PM

Hi,
In standard inspection type field is ' Art ' . Check QALS table where you can find this field & if 03 inspection type is maintained it will store in qals table.
Regards,
Himanshu

Inspection type for customer return of returnable package material

Hi Guys,
I send the returnable package to the customer , while reciving that material to my stock (when the customer return to me ) i want to create outbound delivery with out order refference .
I want system to create inspection lot after doing PGR of the outbound delivery .
The inspection lot sould have the option of result recording and stock posting when i do usage decission
This requirement not met by inspection type 06 , i want to create new inspection type to met above mentioned all requirement .
please provide the steps to be performed to met the same.
Thanks and regards
Thamizhchelvan G

Hi,
The 06 - Inspection type is not stock relevant and also it is not possible to change because it is SAP std.
1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Movement type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
2. If don't want stock for inspection and directly post to Unrestricted using MB1B with movement type 453 Transfer posting to returns from customer to Unrest.
3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
Case2.
Inspection type 05 is a stock relevant inspection type.
To use 05 you must assign the 05 inspection type to the delivery item in configuration.
Follow this path.
Tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data, check which movement type is assigned here.
I think in your case it will be 651.
Change it to 655 and try now.
hope it will work.
Thanks
Vinay

TCode for collective changes in inspection type in Material Master

Hi
Can any one tell me the TCODE for mass changes for inspection type in Material Master.
Charuhas

you can use MM17 or through LSMW or create a BDC through ABAP.
Regards,
qsm sap

QM Inspection Type for SD Delivery in Returned Goods

hi experts,
Any ideas on how to do stock postings in Iinspection Lots that are automatically created upon return delivery
I want to post to inspection stock once the Delivery has been completed. The standard SAP automatic Inspection Lot that is created does not allow us to post to stock. pl. help
thanks in advance.
vinay

Hi Vinay,
Follow the below Customer Return procedure.
Case1.
The 06 - Inspection type is not stock relevant and also it is not possible to change bcz it is SAP std.
1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Mvt type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
2. If don't want stock for inspection and directly post to Unrestricted using MB1B with mvt type 453 Transfer posting to returns from customer to Unrest.
3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
Case2.
Inspectoin type 05 is a stock relevant inspection type.
To use 05 you must assign the 05 inspection type to the delivery item in configuration.
follow this path.
tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data,check which movement type is assigned here.
I think in your case it will be 651.
change it to 655 and try now.
hope it will work.
revert further clarification
Regards,
S.Babusingh

Configure another Inspection Type for Production Order

Hi QM Gurus,
I have one scenario, my client wants to have another inspection type for inspection lot origin goods receipt from production because they have this requirement that for some materials they need to have a status profile that will be active for inspection type standard 04. And there are also some materials from goods receipt from production that does not need status profile. Since the only thing that we could assign as specific status profile is to its inspection type. Hence, i need to create another inspection type for lot origin goods receipt from production aside from inspection type 04 that will create automatic inspection lots with different status profiles.I try this in configuration but no inspection lots has been made for new inspection type assigned to LOt origin 04 and also assigned in the material master inspection set-up. How will i do this???
Thanks.
Regards,
Matildo, Edsel
QM Consultant

Hello Edsel,
you can configure for example an inspection type 0401 and activate this inspection type for the inspection origin 04 in customizing. Please look at the following customizing items:
Transaction QCC3
-> Inspection Lot Creation
- Maintain Inspection Types
- Maintain Inspection Lot Origins and Assign Inspection Types
By activating the correspondent inspection type in the material master you can decide which inspection type is used. If you need both then you could think about using the exit QAAT0001 to assign the correspondent inspection type.
Regards
Isabelle

Quality Mgt - can I create a new inspection type for source inspection

I want to create a new inspection type for surce inspection and I will assign it to Miscellaneous insp lot origin.
What is the application of vendor inspection lot origin ? Can be used for source inspection ?

HI,
For source inspection.
If existing insp types are not going to solve your purpose , you can create insp type & assign it to insp lot origin 01.
But before that , check whether you can use the existing insp type 01 / 0130.
You need to assign that inspection type in the Q-info record , in the source insp field of insp control.
Also go through the help tips provide by SAP
Inspection Type for Insp. Lot Origin (Source Inspection)
    Inspection type for the source inspection
Use
    If you enter an inspection type for inspection lot origin 01 in this field, you can create an inspection lot for the source inspection within the lead time before the (scheduled) delivery date.
Dependencies
    The inspection type must be active in the inspection setup (Quality Management view) of the material master.
    If a status profile is stored in the quality info record for the supply relationship, a goods receipt inspection takes place instead of a source inspection.
Regards
K.M.Arun

Deactivate inspection type from material master

Dears
i have a inspetion qty with satus LTCA CHCR(Cancelled inspection lot)
Now i need to deactivate inspection type from material master
system not allowing to deavtivate as inspection lot was there
how to remove the insepction qty form system
Any tips
Faisal

Hi Faisal,
Hi Faisal,
Try this way,,,
Run QA08
Enter the Plant, Material Code
Then go for the Fourth tab "Mass Processing"
Activate the check box for Activate Despite Inspection Stock and Create Change Documents
Then insert the inspection type.
Execute
System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.
Select the Line item and Save.
Pls let me know if doesn't work.
Regards,
Shyamal
Let's do it again, When you complete the following steps, are you getting any list of materials there? after completing it up to
System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.

Need to create a Store Business document type for material master and store a sharepoint link

Hello,
I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a store business document that it will automatically saves to sharepoint?)
Thanks,
Ran.

>
dhayes12 wrote:
> A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
>
> B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
>
> Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
Thanks!!!

Item Category and MRP type for material is not allowed

Hello all,
I got a Error Message:
Transaction Z113 is not defined (Message no. V1347)
Diagnosis
This combination of item category Z113 and MRP type for material is not allowed.
System response
The system does not allow further processing of this item.
Procedure
Check your entry.
You can display the combination defined in table TVEPZ, which controls scheduling line category determination, and change it as required if you have the authorization to do so. The MRP type for the material may be changed in the material master.
The SD Configuration seems all right, I have:
Sls Doc Type (VOV8) ZA9 (no delivery type assigned)
Item Category (VOV7) Z113
Assigs Sls Doc & Item Ctgry (VOV4) ZA9/ZNOR/blank/blanl/Z113
ZNOR = Std Item-Av. chck Del
ZNOR defined in MM03/Sls Org 2
Define Schedule Line (VOV6) = Z7 (without delivery)
Z7 has FLAG on Prod Allocation
Assign Schedule Line (VOV5) = Z113/ND/Z7
At table: TVEPZ
I have the entry: Z113/ND/Z7
Guys, what would?
Please help me out because I am stuck in this issue.
Thanks a lot,
Barbara

Barbara, this may be tied to Strategy Group on the Material Master (I can't read enough into the detail)
Item Category determination + MRP Type for your schedule line type ties to a Sched. Line category(this you know)
New Rqmts class gets tied to a Rqmts Type
New Rqmts Type gets assigned to rqmts class
Strategy, assign the Rqmts Type to it
Strategy Group, Assign the Strategy to it
MM02 [MRP3 view] strategy group should be the one that ties together (all the other ties
It may be something in this area that you need to trace through ?
Bill

Movement Types for Material Reservations

Dear All
I have defined New package for defining new movements types for material reservation in PM order. this activity is carried out at following path.
SPRO> Plant Maintenance and Customer Service>Maintenance and Service Processing--> Maintenance and Service Orders >General Data>Define Movement Types for Material Reservations.
This has been carried out as i want to take the material in using 904 movement as reversal of 261.
Can any body tell me where can I assign tghis package to Order/order types?
Regards

hi
In the standard system, movement types are preset which you must not change.
For the components, Plant Maintenance and Customer Service, the entry with the key 'IWO1' is relevant. In addition, you only need the two entries for the goods issue (GI) of materials for maintenance orders and the accompanying reverse operation (GI cancellation).
as of my knowledge we don't have the option to go with ordertype wise settings
-AShok
Edited by: Ashok Keerthipati on Nov 19, 2008 5:57 PM

Material Type for Material Determination

Hi Expert,
Is there any spesific/standard material master type for material determination on SD ?
Thanks,
IB

Is there any standard material type for 'Material Entered'
Normal salable materials would be created with HALB or FERT and this is in no way related to material determination. In fact, as everybody asked, if you can explain the business as to why you are comparing material type with material determination, may be you will get the right direction.
G. Lakshmipathi

Message Type for Material Master Data Changes

Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]

Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa

Multiple class types for material master classification display default.

Hello,
We are running on R/3 4.7. We use several different class types for our material masters (001 and Z01). The problem this creates is the end user having to constantly tell the system which class type to use when going to the classification screen for different materials with different class types. If a user views one material's classification page with a particular class type (001) then looks at another material with a different class type (Z01) the system tries to pull in information from the last materials class type (001). The system tells the user there are no assignments for the class (001) in the material their viewing but there is one for class type (Z01). The user then has to select the class type that applies to the material master their trying to view. Is there a way for the system to automatically see when a material has only one class type assigned to it for it to automatically default it in without the user having to specify the class type?
Thanks,
JRW

Hi,
Check the configuration, have you maintained default class type for material type.
Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

Multiple Class Type for Material Master

Hello Everyone,
I would like to ask where in configuration can I setup Classification so that for each Material Master it can have Multiple Class Type. (such as 001 - Material Class, 023 - Batch, 300 - Variants). Because currently I can only see 023 - Batch whenever I create a new Material Master.
Thanks.

Hi,
Check the configuration, have you maintained default class type for material type.
Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

Inspection Type for Material

Similar Messages

Maybe you are looking for