Inspection values overwritten in batch
Hi,
Using sample management multiple samples are recorded for a particular
inspection lot. Values are recorded against the same inspection
characteristics in the inspection lot. Inspection characteristics are
linked to class characteristics. Class characteristics are set to
accept multiple values. Upon usage decision only results from the last
sample are recorded to the batch. We need the ability to have all the
recorded values written to the batch. I cannot find any setting or
configuration to facilitate multiple values from the inspection lot to
the batch.
Does anyone have any idea how to handle this situation?
Thanks,
David
Dear Ajay,
From your problem description, I think that you are using a full update into your ODS 0FIA_DS13, the reason why new values are overwriting the old ones. You need to use delta update to conserve the changes.
To elaborate my answer as regards the ANLP table, you need to elaborate on the king of infosource you are using (standard/specific).
If you this anwer helps you in any way, do allot points.
Thanks
Vinay
Similar Messages
-
BW Stock Values (0IC_C03) by batch
Has anyone successfully gotten stock values to display out of InfoCube 0IC_C03 at the Batch level? I've reviewed OSS note 589024 and will continue to study it, but it isn't clear to me if this is possible.
Stock values are correct at the plant-material level, but when a user drills down on batch, the values are wrong. They want the report to "spread out" the inventory values amongst the batches but instead it just displays wrong values.
We may end up implementing a back-end solution somehow but am wondering if anyone else has done development to get around this issue.
Thanks,
ChrisHello Chris.
Miguel is right. We also implemented the code from the "How to" paper that comes with that note and is working just fine. However I've come with a problem that I can't find an answer yet...
The paper tells you how to use a prequery for a single month, but what about an interval of time ??? I've tried to do it but I don't get correct values...
Did you Chris or Miguel come with this issue as well ??
Thanks,
Luis -
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are
Vendor batch No. : Transaction ZJPMPU322
(Background)
There are "vendor batch" and "batch" fields in Goods-in-order and Goods-in-plan lists (transaction ZJPMPU322). Values for these fields are retrieved from inbound delivery document (transaction VL33N). After core 7.0 upgrade, "vendor batch" is not copied from "batch" in inbound delivery document any more so that nothing appears in the vendor batch field in the lists.
(Change request)
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are retrieved from "batch" in inbound delivery document ONLY IF "vendor batch" is blank in the inbound delivery document.
(Current design)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN
(If there is no record in LIPS, blank will be printed out for both fields)
(After change)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN only if LIPS-LICHN is not blank.
If LIPS-LICHN is blank, vendor batch is retrieved from LIPS-CHARG.
(If there is no record in LIPS, blank will be printed out for both fields. If both LIPS-CHARG and LIPS-LICHN are blank, blank will be printed out for both fields),
Following is the program:
REPORT zjpmrpu322 MESSAGE-ID zjpm001
NO STANDARD PAGE HEADING
LINE-COUNT 50
LINE-SIZE 255.
*& Development ID: PU_DD_322_LJP *
*& Report : ZJPMRPU322 *
*& The Purpose of this program is to print the Goods-in-order list *
*& and the Goods in plan list for raw materials, materials purchase *
*& etc at the Sasayama plant, Japan. *
*& Change Log: *
*& Init Who Date Text *
*& PV P V R S Varma 07-May-2003 Initial Version *
*& DU D.Usui 2004/02/26 CR No. 1432 *
*& DU D.Usui 2004/03/08 CR No. 1447 *
*& DU D.Usui 2004/05/06 CR No. 1591 *
Constants
CONSTANTS:
c_werks LIKE ekpo-werks VALUE 'JP01', "Plant code - Sasayama plant
c_id LIKE thead-tdid VALUE 'F02', "Text ID for Info record
c_object LIKE thead-tdobject VALUE 'EKPO',"Object of text for info rec
*c_zzjp_r1 LIKE marc-zzjp_re1 VALUE 'GMP', "Goods in plan- Domestic
*c_zzjp_r2 LIKE marc-zzjp_re1 VALUE 'GMPI', "Import sales order document
c_plus TYPE c VALUE '', "Holding '' sign
c_spras LIKE makt-spras VALUE 'J', "Language key Japan
*c_device(7) type c value 'PRINTER', "Device type
c_form(16) TYPE c VALUE 'ZJPMPU305', "Form name
c_ele_gmp(4) TYPE c VALUE 'GMP', "GMP Text element
c_ele_gmpi(4) TYPE c VALUE 'GMPI', "GMPI Text element
add begin CR1432
c_ele_bgmp(4) TYPE c VALUE 'BGMP', "BGMP
c_ele_bgmpi(5) TYPE c VALUE 'BGMPI', "BGMPI
add end CR1432
c_function(3) TYPE c VALUE 'SET', "Function
c_type(4) TYPE c VALUE 'BODY', "Window area in main window
c_win_head(7) TYPE c VALUE 'HEADING', "Heading window
c_win_shead(7) TYPE c VALUE 'SUBHEAD', "sub heading window
c_win_fot1(7) TYPE c VALUE 'FOOTER1', "Footer 1 window
c_win_main(4) TYPE c VALUE 'MAIN', "Main window
c_comd(8) TYPE c VALUE 'NEW-PAGE', "New-page command
c_zar TYPE ekko-bsart VALUE 'ZAR',
c_x TYPE c VALUE 'X', "Indicator for print options
c_f TYPE c VALUE 'F', "Indicator for Purchase Order
add begin CR1591
Deletion indicator in purchasing document
c_loekz(1) TYPE c VALUE 'L',
For ranges tables
c_sign_i(1) TYPE c VALUE 'I', "Sign(include)
c_op_eq(2) TYPE c VALUE 'EQ', "Option(=)
Confirmation category
c_ebtyp_ab(2) TYPE c VALUE 'AB', "Order acknowledgment
add end CR1591
c_la(2) TYPE c VALUE 'LA'. "Indicator for Inbound deliver
Database Tables
Vaiables / Internal tables *
Internal table to store PO information
Not used after CR1591
DATA: BEGIN OF t_purc OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
charg LIKE eket-charg, "Batch number
matnr LIKE ekpo-matnr, "Material code
werks LIKE ekpo-werks, "Plant
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
END OF t_purc.
Internal table to store material description.
DATA: BEGIN OF t_makt OCCURS 0,
matnr LIKE makt-matnr, "Material code
maktx LIKE makt-maktx, "Material description
END OF t_makt.
Internal table for storage of final EKET data
DATA: BEGIN OF t_eket OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
ebelp_ex(6) TYPE n, "Extended ebelp with length 6
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
dabmg LIKE ekes-dabmg, " Delivered Quantity
charg LIKE eket-charg, "Batch number
matnr LIKE ekpo-matnr, "Material code
werks LIKE ekpo-werks, "Plant
maktx LIKE makt-maktx, "Material Description-- jp check
etens LIKE ekes-etens, "Sequence Number
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
vpnam(40) TYPE c, "Vendor product name
END OF t_eket.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE ekes-eindt, "Item delivery date
menge LIKE ekes-menge, "Scheduled Quantity
dabmg LIKE ekes-dabmg, " delivered quantity
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
mark TYPE c,
END OF t_ekes.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes_temp OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE ekes-eindt, "Item delivery date
menge LIKE ekes-menge, "Scheduled Quantity
END OF t_ekes_temp.
Internal table for storing data from MLGN table.
DATA: BEGIN OF t_mlgn OCCURS 0,
matnr LIKE mlgn-matnr, "material code
lhmg1 LIKE mlgn-lhmg1, "Standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of measure
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
END OF t_mlgn.
Internal table for storing data from MARM table.
DATA: BEGIN OF t_marm OCCURS 0,
matnr LIKE marm-matnr, "material code
umrez LIKE marc-zzjp_cas_size, "Std package unit
meins LIKE ekpo-meins, "alternate unit
END OF t_marm.
Internal table for storing data from MARC table.
DATA: BEGIN OF t_marc OCCURS 0,
matnr LIKE marc-matnr, "Material code
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
END OF t_marc.
Internal table for storing data from lfa1 table.
DATA: BEGIN OF t_lfa1 OCCURS 0,
lifnr LIKE lfa1-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
END OF t_lfa1.
Internal table for Storing data from LIPS table.
DATA: BEGIN OF t_lips OCCURS 0,
vbeln LIKE lips-vbeln, "Delivery document no
posnr LIKE lips-posnr, "Item number for Delivery document
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
END OF t_lips.
Internal table for storing the final display data.
DATA: BEGIN OF t_display OCCURS 0,
g_checkbox type c, "check box for selection of records
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
vpnam(40) TYPE c, "Vendor product name
lifnr LIKE ekko-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
umrez LIKE marc-zzjp_cas_size, "Std package unit
meinh LIKE ekpo-meins, "alternate unit
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
std_pac_no(13) TYPE n, "Std receipt package no
tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
vbeln like ekes-vbeln, "Goods-in-order
vbelp like ekes-vbelp, "Item
add end CR1447
END OF t_display.
Internal table for storing the final display data -Goods in order list
DATA: BEGIN OF t_display1 OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
vpnam(40) TYPE c, "Vendor product name
lifnr LIKE ekko-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
umrez LIKE marc-zzjp_cas_size, "Std package unit
meinh LIKE ekpo-meins, "alternate unit
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
std_pac_no(13) TYPE n, "Std receipt package no
tot_std_pt(13) TYPE n, "Total no of std pallets
END OF t_display1.
Internal table for storing the final display data - Goods in plan list
DATA: BEGIN OF t_display2 OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
vbeln like ekes-vbeln, "Goods-in-order
vbelp like ekes-vbelp, "Item
add end CR1447
END OF t_display2.
add begin CR1591
RANGES: r_matnr FOR mara-matnr, "for p_matnr
r_ebeln FOR ekpo-ebeln. "for p_ebeln
add end CR1591
DATA: line TYPE i. " line number
DATA: g_checkbox TYPE c. "check box for selection of records
DATA: g_tab LIKE sy-index. "variable to hold index
DATA g_tabix LIKE sy-tabix. "holder for table index
Printing Options.
DATA: lw_pr_options LIKE itcpo.
*lw_pr_options-tddest = 'SA03'. " Print Device Name
lw_pr_options-tdpreview = 'X'. " Print Preview
lw_pr_options-tdnewid = 'X'. " New Request
lw_pr_options-tdlifetime = 2. " Retention in Spool
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
SELECT-OPTIONS:
s_date FOR sy-datum DEFAULT sy-datum. " Search period.
PARAMETERS:
p_matnr LIKE mara-matnr, " Material code
p_ebeln LIKE ekpo-ebeln. " Purchase Document No
SELECTION-SCREEN END OF BLOCK blk1.
Selection Screen Checks *
AT SELECTION-SCREEN.
IF ( s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Entry Must in atleast one of the Fields'(t00).
ENDIF.
IF ( NOT p_matnr IS INITIAL ) AND
( s_date IS INITIAL ) AND
( p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del begin CR1591
This check is not found in original FS
IF ( NOT p_matnr IS INITIAL ) AND
( s_date IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del end CR1591
Validations for Data selection *
del begin CR1591
Waste check
IF ( NOT s_date IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
PERFORM f_check_date_in_eket.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
PERFORM f_check_date_in_eket.
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
PERFORM f_check_date_in_eket.
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
( NOT s_date IS INITIAL ) AND
( p_matnr IS INITIAL ).
PERFORM f_check_date_in_eket.
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
( s_date IS INITIAL ) AND
( p_matnr IS INITIAL ).
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
del end CR1591
Data selection from Tables *
START-OF-SELECTION.
SET PF-STATUS 'SELECT'.
add begin CR1591
Set ranges tables
PERFORM set_ranges.
add end CR1591
mod begin CR1591
**Selection of PO data from EKET into internal table t_purc.
PERFORM f_select_eket.
**Selection of corresponding PO data for EKET from EKES into t_ekes.
PERFORM f_select_ekes.
**Selection of material desc from MAKT table into T_makt.
PERFORM f_select_makt.
**Copy the contents of t_purc and t_makt into t_eket table.
PERFORM f_move_eket.
**Replace the corresponding entries of t_eket with t_ekes.
PERFORM f_update_eket.
Selection of PO data from EKET into internal table T_EKET.
PERFORM f_select_eket2.
Selection of corresponding PO data from EKES appending to T_EKET.
PERFORM f_select_ekes2.
Selection of material desc from MAKT table into T_MAKT.
PERFORM f_select_makt2.
mod end CR1591
*Selection of vendor product name.
PERFORM f_select_vpnam.
del begin CR1591
No need
**copy t_eket-ebelp into temporary variable.
PERFORM f_copy_ebelp.
del end CR1591
*selection of data from MLGN table into t_mlgn internal table
PERFORM f_select_mlgn.
*selection of data from marm table into t_marm internal table
PERFORM f_select_marm.
*selection of data from marc table into t_marc internal table
PERFORM f_select_marc.
*selection of data from lfa1 table into t_lfa1 internal table
PERFORM f_select_lfa1.
*Selection of data from LIPS table into t_lips internal table
PERFORM f_select_lips.
del begin CR1591
Don't display list screen when no data exists
*END-OF-SELECTION.
del end CR1591
*lines = sy-linno - 1.
*Collection of data into the final display internal table t_Display
PERFORM f_collect_final.
*Display the contents of t_display as a simple List
PERFORM f_list_display.
AT USER-COMMAND.
PERFORM f_select_layout.
INCLUDE zjpmipu315.
INCLUDE zjpmipu316.
*& Form f_check_MATNR_in_plant
This Routine is to check if the the selected material code is
available in the plant 'JP01'.
FORM f_check_matnr_in_plant.
DATA: l_matnr LIKE mara-matnr.
SELECT matnr UP TO 1 ROWS FROM marc
INTO l_matnr
WHERE
matnr = p_matnr AND
werks = c_werks.
ENDSELECT.
IF l_matnr IS INITIAL.
MESSAGE e000 WITH
'The material is not available in '(t02) c_werks 'plant'(t20).
ENDIF.
ENDFORM. " f_check_MATNR_in_plant
*& Form f_check_EBELN_in_EKPO
This Routine is to check if the Purchase order number selected
is existing or not and if it exists, check if it is related to
the plant 'JP01'.
FORM f_check_ebeln_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
INTO l_ebeln
WHERE
ebeln = p_ebeln AND
werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
MESSAGE e000 WITH
'PO not available or not related to '(t03) c_werks 'plant'(t21).
ENDIF.
ENDFORM. " f_check_EBELN_in_EKPO
*& Form f_check_matnr_in_ekko
This routine is to check if any PO exist for the selected
Material code.
FORM f_check_matnr_in_ekpo.
DATA: l_matnr LIKE ekpo-matnr.
SELECT matnr UP TO 1 ROWS FROM ekpo
INTO l_matnr
WHERE
matnr = p_matnr.
ENDSELECT.
IF l_matnr IS INITIAL.
MESSAGE e000 WITH
'PO does not exist for the material no'(t04) p_matnr.
ENDIF.
ENDFORM. " f_check_matnr_in_ekpo
*& Form f_check_date_in_eket
This routine is to check if any purchase order exists
with the selected
FORM f_check_date_in_eket.
DATA: l_eindt LIKE eket-eindt.
SELECT eindt UP TO 1 ROWS FROM eket
INTO l_eindt
WHERE
eindt IN s_date.
ENDSELECT.
IF l_eindt IS INITIAL.
MESSAGE e000 WITH
'No PO exist with the selected delivery date '(t05).
ENDIF.
ENDFORM. " f_check_date_in_eket
*& Form f_check_werks_in_ekpo
This Routine is to check if the selected purchase order
is associated with the plant JP01
FORM f_check_werks_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
INTO l_ebeln
WHERE
werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
MESSAGE e000 WITH
'The selected P0 is not relevant to '(t06) c_werks 'plant'(t22).
ENDIF.
ENDFORM. " f_check_werks_in_ekpo
*& Form f_select_eket
Routine to collect data from EKET, EKPO, MAKT, EKKO tables
using inner join and store the data into internal table
t_PURC. The data selection is based on the selection screen's
input.
FORM f_select_eket.
IF ( NOT s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~matnr = p_matnr AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~matnr = p_matnr AND
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ENDIF.
IF sy-subrc <> 0.
MESSAGE s000 WITH 'Data not found'(t07).
LEAVE LIST-PROCESSING.
ELSE.
SORT t_purc.
ENDIF.
ENDFORM. " f_select_eket
*& Form f_select_makt
Routine to select the material description for all the
materials present in T_purc table
FORM f_select_makt.
DATA: l_t_makt(4) TYPE c VALUE 'MAKT'.
SELECT
matnr
maktx
FROM
makt
INTO TABLE t_makt
FOR ALL ENTRIES IN t_purc
WHERE
matnr = t_purc-matnr AND
spras = c_spras.
IF sy-subrc <> 0.
MESSAGE s000 WITH
'Relevant data not found in'(t09) l_t_makt 'table'(t23).
ELSE.
SORT t_makt.
ENDIF.
ENDFORM. " f_select_makt
*& Form f_move_eket
Routine to join data in T_PURC and T_MAKT tables into
internal table T_MAKT.
FORM f_move_eket.
LOOP AT t_purc.
t_eket-ebeln = t_purc-ebeln.
t_eket-ebelp = t_purc-ebelp.
t_eket-eindt = t_purc-eindt.
t_eket-menge = t_purc-menge.
t_eket-charg = t_purc-charg.
t_eket-matnr = t_purc-matnr.
t_eket-werks = t_purc-werks.
t_eket-meins = t_purc-meins.
t_eket-lifnr = t_purc-lifnr.
READ TABLE t_makt WITH KEY matnr = t_purc-matnr
BINARY SEARCH.
IF sy-subrc = 0.
t_eket-maktx = t_makt-maktx.
ENDIF.
APPEND t_eket.
CLEAR t_eket.
ENDLOOP.
ENDFORM. " f_move_eket
*& Form f_select_ekes
Routine to select EKES data for all corresponding entries
of T_EKET.
FORM f_select_ekes.
DATA: l_tabix TYPE i.
IF NOT s_date IS INITIAL.
SELECT
ebeln
ebelp
etens
eindt
menge
INTO TABLE t_ekes
FROM
ekes
WHERE
eindt IN s_date.
ELSE.
DESCRIBE TABLE t_purc LINES l_tabix.
IF l_tabix GT 0.
SELECT
ebeln
ebelp
etens
eindt
menge
dabmg
vbeln
vbelp
FROM
ekes
INTO TABLE t_ekes
FOR ALL ENTRIES IN t_eket
FOR ALL ENTRIES IN t_purc
WHERE
ebeln = t_purc-ebeln AND
ebelp = t_purc-ebelp AND
eindt IN s_date.
AND ebeln eq p_ebeln.
and matnr in p_matnr.
ENDIF.
CLEAR l_tabix.
IF NOT s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ELSEIF NOT s_date IS INITIAL AND p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ELSEIF s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ENDIF.
IF sy-subrc = 0.
SORT t_ekes.
ENDIF.
IF NOT t_ekes[] IS INITIAL.
t_ekes_temp[] = t_ekes[].
SORT t_ekes_temp BY ebeln ebelp.
DELETE ADJACENT DUPLICATES FROM t_ekes_temp COMPARING ebeln ebelp.
LOOP AT t_ekes_temp.
READ TABLE t_purc WITH KEY ebeln = t_ekes_temp-ebeln
ebelp = t_ekes_temp-ebelp.
IF sy-subrc NE 0.
CLEAR t_purc.
SELECT SINGLE
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO CORRESPONDING FIELDS OF t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~ebeln = t_ekes_temp-ebeln
AND eket~ebelp = t_ekes_temp-ebelp
AND ekpo~elikz NE c_x
AND ekko~bstyp EQ c_f
AND ekko~bsart NE c_zar.
IF sy-subrc EQ 0.
APPEND t_purc.
CLEAR t_purc.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH: t_ekes_temp, t_ekes.
CLEAR: t_ekes_temp, t_ekes.
Once the header is filled up get the details from EKES
SELECT ebeln ebelp etens eindt menge dabmg vbeln vbelp
INTO TABLE t_ekes
FROM ekes
FOR ALL ENTRIES IN t_purc
WHERE ebeln EQ t_purc-ebeln.
Mark the entries as 'X' which falls in the date range
LOOP AT t_ekes.
IF t_ekes-eindt IN s_date.
t_ekes-mark = 'X'.
MODIFY t_ekes INDEX sy-tabix TRANSPORTING mark.
ENDIF.
ENDLOOP.
SORT t_ekes BY ebeln ebelp ASCENDING mark DESCENDING.
Delete the entries from eket if no entries in EKES falls in the period
LOOP AT t_purc.
l_tabix = sy-tabix.
READ TABLE t_ekes WITH KEY ebeln = t_purc-ebeln
ebelp = t_purc-ebelp.
IF sy-subrc EQ 0.
IF t_ekes-mark NE 'X'.
DELETE t_purc INDEX l_tabix.
ENDIF.
ENDIF.
ENDLOOP.
delete the entries from EKES which do not fall in the specified period
DELETE t_ekes WHERE mark NE 'X'.
ENDFORM. " f_select_ekes
*& Form f_update_eket
Routine to substitute relevant t_eket entries with that of
t_ekes entries.It does not modify the remaining entries for
for which the corresponding values in t_ekes doesnot exist.
FORM f_update_eket.
DATA: BEGIN OF lt_temp_eket OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
dabmg LIKE ekes-dabmg, " Delivered quantity
matnr LIKE ekpo-matnr, "Material code
maktx LIKE makt-maktx, "Material Description-- jp check
etens LIKE ekes-etens, "Sequence Number
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
charg LIKE eket-charg, " Batch number Added by PD 08/08/03
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
END OF lt_temp_eket,
l_menge LIKE ekes-menge.
LOOP AT t_eket.
LOOP AT t_ekes WHERE ebeln = t_eket-ebeln
AND ebelp = t_eket-ebelp.
Added by PD 08/08/03
MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
MOVE t_eket-ebeln TO lt_temp_eket-ebeln.
MOVE t_eket-ebelp TO lt_temp_eket-ebelp.
MOVE t_eket-meins TO lt_temp_eket-meins.
CLEAR l_menge.
l_menge = t_ekes-menge - t_ekes-dabmg.
IF l_menge LE 0.
CONTINUE.
ELSE.
MOVE l_menge TO lt_temp_eket-menge.
ENDIF.
MOVE t_ekes-eindt TO lt_temp_eket-eindt.
MOVE t_ekes-etens TO lt_temp_eket-etens.
MOVE t_eket-lifnr TO lt_temp_eket-lifnr.
MOVE t_eket-maktx TO lt_temp_eket-maktx.
MOVE t_eket-matnr TO lt_temp_eket-matnr.
MOVE t_ekes-vbeln TO lt_temp_eket-vbeln.
MOVE t_ekes-vbelp TO lt_temp_eket-vbelp.
APPEND lt_temp_eket.
CLEAR lt_temp_eket.
CLEAR t_ekes.
ENDLOOP.
IF sy-subrc NE 0.
Added by PD 08/08/03
MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
MOVE t_eket-ebelnDear
Problem No 1 : we are working in a process industries with three plants each of them have three order type. we have define MRP group in "OPPR" then assign each MRP group to Orde types in "OPPE". Now the problem is whn i convert plan order in process order for any material systme automaticaly pick the order type PIi01.
Answer :
1.Please check the OPPR -Plant and MRP group -Select Order Type Button -Check what Order Type you have assinged here ( PI01( May be the default Process Order Type )
2.If you are maintaing MRP group ( 0001 or 0002) , did you asisng the same in MRP1 view ?? because
3.Did you maintain the similar Order type in OPKP -Define Production Scheduling Profile ? -This has highest priority .
4.Did you maintain correct order type in OPJH-Maintain Order Type ??
Refer the expert comments on the same issue : Strategy group to define production order type
Problem No 2: 2nd Problem is system system is not creating plan order for prrevios dates. say i enter PIR for month of november from first november to 30th november and run MRP on 29th the sytem create plan order on 30th of november with exception message 30.
Answer : You can plan the order in back dated , if you maitain Satrt date in the Past optiuon in OPU3/OPU5-Define Scheduling parameters .Goto OPU3 -Select the Order Type -Double click -Maintain 90-60 days in the Start Date in the past in Scheduling Control and Details scheduling tab .
Hope it helps
regards
JH -
Assigning of characteristics value for a batch
Hi All,
Please help regarding the assigning of characteristics value for a batch in transaction code MSC2N or MSC2 in the classification tab.
If Function modules or BAPI is available pls advise the inputs to be provided for the function modules.
Here is one function module which i searched, but if i run this function module, i am not able to commit my characteristics value.
The function module is CIF_BATCHCHAR_MAP.
For the above function module the inputs which i have given are...
Material number
Batch
Plant
Class type
Class Number
Characteristics name
Characteristics value
Expecting your earliest reply.
Thanks,
G.C.Arravind Kumar VikramTry the code below
*.1 create key
it_objects-key_field = 'MATNR'.
it_objects-value_int = matnr.
APPEND it_objects.
it_objects-key_field = 'CHARG'.
it_objects-value_int = charge.
APPEND it_objects.
CLEAR l_objectkey.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
EXPORTING
objecttable = 'MCH1'
IMPORTING
objectkey_conc = l_objectkey
TABLES
objectkeytable = it_objects
return = it_return2.
2 fill it_num it_char it_curr with values
3 change characteristics
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
objectkey = l_objectkey
objecttable = 'MCH1'
classnum = it_class-classnum
classtype = '023'
TABLES
allocvaluesnumnew = it_num
allocvaluescharnew = it_char
allocvaluescurrnew = it_curr
return = it_return. -
Next inspection date in the Batch Determination Screen
Hi Gurus,
I am having problems with some user requirements because I am an abaper and I think this needs some SD expertice. Users want to see the "Next inspection date" of the batch (field QNDAT) when they do the batch determination of a delivery (Batch Split --> Batch determination). They want to see a new column in the screen, right next to the "Characteristic sort" field. I think that to put a new column in that standard screen is not possible. So I suggest to change the contents of the existing characteristic sort. And there is where I do not know how to do that. It is possible at all to have the next inspection date as a characteristic of the batch and then use it to sort?
Any help would be really appreciated.
Regards.Hi,
Yes you can use next inspection date as a characteristics and sort the batches based on that.
Inform the user to add this characteristics (LOBM_QNDAT) in the material batch class and batch selection class using transaction code CL02.
Then in SPRO, using transaction code CU71, in the sort rule add this field as characteristics (LOBM_QNDAT).By this way the system will sort the batches based on next inspection date as parameter.
Note that the user needs to fill-in the next inspection date in all the batches in order for the sort rule to work properly.
Regards, -
Problems with inspection result transfer to batch classification
Hello ,
I `m struggling with the following problem: As result of UD I want to transfrer the inspection results to the batch class (evaluate the batch by the results of inspection). the correct batch class characteristic is assigned to the master inspection characteristic.
It works fine, but only if I maintain a material specification for the material which includes the characteristics I want to get valuated automatically.
We are using only inspection plans, we do not work with material specifications for quality inspection. In the inspection settings of the material master data only 'inspection with plan' is marked, 'material specification' we keep empty.
I do not believe that I have to maintain the material specification in order to get results transfered - But Am I wrong?
If it is possible to get the results transferred without a maintained material specification - what is wrong with my settings? what do I need to change in order to get the process running well without that material specification nobody wants to maintain?
Thanks in advance for all helpful hints.
KurtHi
Go to QCC0>Basic Setting>Setting at plant level--->select plant ->Inspection lot completion->Batch valuation without material spec
check indicator.
If you set this indicator, a link between the master inspection characteristics and the class characteristics for the batch class must exist when an inspection lot is created, for batch valuation to occur when the usage decision or inspection point valuation is made. A link within the material specification is not required.
If you do not set this indicator, batch valuation only occurs when the usage decision or inspection point valuation is made, if a link using the material specification exists between the master inspection characteristics and the class characteristics for the batch class. In this way, you can control on a material-dependent basis whether the batch characteristics are valuated based on the inspection results.
Regards'
Sujit -
GR inspection based on vendor batch
Hi Guys,
I have a test that must be done for each
vendor batch(Not for every GR). Vendor may send materials from same
batch in two or more deliveries let say in a month. I
was thinking of using DMR but I couldn't find a way to
relate it to vendor batch(It's based on quality level and number of inspection lots). When we do MIGO for an
inward delivery we use vendor batch (we dont create
our own batch number)
Please share your thoughts in this matter.
Thanks in advance ,
ShahinHello Shahin,
if I understand your question correctly, I think that you should take a closer look at the settings in the material master for QM. If you enter the inspection setup you can set the Control of inspection lots with the following values:
' ' An inspection lot for each material document item (No lot summary)
'X' An inspection lot for each purchase order item/order item
'1' An inspection lot for each material document and material
'2' An inspection lot for each material and batch
The setting 2 could be used for example.
Another thinkable solution is that you use the exit QAAT0001 where you can set your own criteria concerning the inspection lot creation.
I hope that this information proves usefull in your case.
Regards
Isabelle -
Inspection result to multiple batches
Hello,
For my client, I need to figure out a way to get the inspection results from QM into multiple batches. Is there a simple (standard) way to do this?
The situation is that my client produces 3 batches at once. Samples for analysis are only taken from 1 of those 3 batches. After the analyses, at the usage decision, the values need to be copied into the characteristics of all 3 batches.
Anyone can help me out with this one?Hi,
That means you have only one inspection lot(manually created) for the production of 3 batches. But you can link only one material/one batch to an inspection lot in SAP. In your case, you can record the results for 1 batch and maintain the other batches in text field(that Inspection not required for other 2 batches).
By the way which inspectin type are you using?
WR,
Sanjeev -
Copy of Material Master charac. values to the batch classif. in GR for PO
Dear gurus,
Could you please help me with the following issue. I have a material managed in batches, and it has a classification type 023 in material master. I fill one chaacteristic of this classification with some value. Now I want this value to be copied to the batch classification during the creation of new batch while making GR to production order.
Is it possible?Hi Nikolaj,
What I am understand your requirement is like,
You want to fetch the value of Characteristic maintain in Batch class in Material master to the Batches, correct?
But my Friend if you maintain value of characteristic in Batch Class in material master then it will works as a validation.
For Example,
Suppose your Characteristic is Colour and in Material Master Batch classification view you have maintain value as Red.Then system will not allow you any other colour in Batches.You will find that value in Drop Down list.
Regards,
Dhaval -
How to delete the value assignment in batches?
Hi guys,
How is it going?
We want to delete one assigned value ( for example: the value " powder " in "state of matter " of " physical / chemical data ") in property tree for thousands of REAL_SUBs.
But to my knowledge, I only know the way to delete them one by one. How can I delete them in batches?
Thanks,
LiHello
the option of the EasyExpert is a nice option (you need to my knowledge an installed expert server in using the easy expert; therefore customizing must be performed, RFC connection etc.).
In any case there could be a further topic there you could get some "trouble" in some sense. If you exchange by mass the phrase in "state of matter" you can only change the phrase (according to my knowlegde of the easy expert) but nothing else. If you switch from e.g. solid to liquid this is in my opion one of those topics which could be WWI report "critical" (normally it is DG critical too). Such a change is normally a legal change that means if use the property "State of matter" in MSDS generation then normally most legislations would say: this is a legal change. Therefore you need to "flag" this as "relevant" (standard EH&S process) so that you get the change mark in MSDS. The Easy Expert can not perform this to my knowledge. It can only change the phrase.
May be you need to consider this behaviour too.
With best regards
C.B.
PS: In your case you will have no problem because you delete something but the topic will come up if you would like to "exchange" something. And I would assume that if you have deleted the "state of matter" you would like to populate the same property again. If you need the "relevancy indicator" one option would be to generate a load file using the standard EH&S approach
Edited by: Christoph Bergemann on Apr 24, 2010 1:41 PM
Edited by: Christoph Bergemann on Apr 24, 2010 1:43 PM
Edited by: Christoph Bergemann on Apr 24, 2010 1:44 PM
Edited by: Christoph Bergemann on Apr 24, 2010 1:44 PM
Edited by: Christoph Bergemann on Jun 10, 2010 10:16 PM
Edited by: Christoph Bergemann on Jun 10, 2010 10:16 PM
Edited by: Christoph Bergemann on Jun 10, 2010 10:16 PM -
Automatic creation of inspection lot for Expired Batches
Hi All,
I am in one trouble and need some help in above scenario.
I am able to create inspection lot for batches about to expire, but how to create inspection lots for batches which were already expired or which next inspection date already missed?
Master data like '09' inspection type, inspection plan is already maintained.
Second question, is QA07 also affect on special stocks like vendor stock or project stock etc?
Immediate response will be appreciated.
ThanksHi
To meet you above mentioned requirement you have to modify the program RQAAAS10 as per your logic both to create lot for Expired Material and to consider project stock or vendor stock as In standard SAP these stock are not considered.
regards
Manish -
Data_table inspects "value" before other inputs are processed.
Hello,
The ordering in which JSF processes inputs and outputs in the presence of a data_table seems problematic, and I'm at a loss for a workaround.
When a form is submitted (via a command_button, for example), the data_table accesses its "value" reference before any of the other "inputs" in the form are processed by JSF. For example:
[snip]
<h:input_text value="#{TestBean.testValue}"/>
<h:data_table rows="2" value="#{TestBean.result}" var="object">
<h:column>
<f:facet name="header">
<h:output_text value="Name"/>
</f:facet>
<h:output_text value="#{object.name}"/>
</h:column>
</h:data_table>
<h:command_button action="#{TestBean.testAction}" value="Test"/>
[snip]
When this form is submitted, the value from input_text is set AFTER data_table calls TestBean.result. So, the ordering of method calls after submission is:
TestBean.result
TestBean.testValue
TestBean.testAction
In contrast, if a data_table is NOT used to get at TestBean.result, the ordering of the method calls is quite different:
TestBean.testValue
TestBean.testAction
TestBean.result
Is this a bug, or does data_table intentionally inspect its "value" before any of the other form inputs are processed? If so, what is the solution for ensuring TestBean gets all of the information it needs before TestBean.result is called in the data_table...? In other words, TestBean.result depends on TestBean.testValue.
Please let me know if any other info is needed!
Thanks,
RyanHi Adam,
Thanks for your reply. I guess I could use some help making the leap from Controller/View mentalities. :)
How can a bean ever process input data if it can't depend on the data being there? Or, can you suggest a way to model the above example so that the "results" getter always knows the input from "testValue" has been set -- split it into two beans maybe?
Or, maybe do the processing inside the "testAction" instead of "results"? Even then, wouldn't that be assuming that when "testAction" is called, "testValue" has been set.
I'm afraid I don't understand how this can be modeled without some expectation that form values have been filled in the bean before other tasks are fired.
Thanks,
Ryan -
Retrival of values based on Batch Characteristics
Dear all
I am maintining some characteristics for a material on Batch classes. Like to pull the total stock based on any 1 these characteristics.Kindly suggest what are the tables we can use for this and logic
Thanx
MKHi,
Please check these tables
MCHA Batches
MCH1 Batches
MCHB Stock: batches
CABN Characteristics ( o.a. batch/vendor)
CABNT Characteristics description
CAWN Characteristics ( o.a. material)
CAWNT Characteristics description
AUSP Characteristic Values
Class types and objects :
TCLAO Several class types for object
TCLA Class types ( vb. lfa1 => v10 en 010)
TCLAT Class type text
TCLT Classifiable objects
TCLC Classification status
Links:
INOB Link between Internal Number and Object
KLAH Class header data
KSSK Allocation Table: Object (vb.matnr) to Class
KSML Characteristics for a class (internal number)
Regards,
Raj. -
Characteristics values required for batches
hi,
I need to retrive batch information from MCHA table for the combination of material/plant/Batch.
There are few values are available in the classification view. can any one tell me how to retrive those values. where this is getting stored??
Thanks
SKNot sure whether I understood your question completely.
What would you like to acchieve?
1) Would you like to read batch information together with batch classification from a program?
The most standard way to get this information is through BAPI_BATCH_GET_DETAIL.
This provides batch information plus batch classification.
If you have look into the BAPI code, there's also an internal function module VB_BATCH_GET_DETAIL that provides same information in a more "internal" view.
I would not recommend to directly retrieve (without buffer etc) from the db.
2) Would you like to do it online for th user?
I'd go for the transaction BMBC, the batch information cockpit.
Does this help? If not, please restate your question.
- Stefan -
Usage decision of Inprocess Inspection lot as per batch
Dear,
i am doing result recording to inspection point with partial lot and with batch,
i have some charactristics which is to be transfer to the batches for that i have to do separate Usage decision with every batches
Is it possible??
note i have used 120 inspection point.( with shift wise) and partial lot with batches..
Regards
PravinYou can mkae a UD for the lot, but not by batch.
The characteristic data should be transferred to the batch after the valuation of each inspection point however. So your results should already be copied over long before you make the UD.
Craig
Maybe you are looking for
-
No Picture on Videos on Ipod audio only, perfect in iTunes? Help
Videos are not playing correctly on iPod, they play fine in iTunes, what is wrong, what do I need to fix? Thanks for taking the time to read and reply to my Post, Sebastian
-
IMovie searching for files for project that does not exist...
Whenever I fire up iMovie 09 on Lion, it spins, and then tells me it can't find a video file for a project that does not exist. That is, it says 'File xxx.mov from project 'Movie 1 cannot be found - without this file the movie cannot be played.' The
-
Hi All, I am developing the report for calculating the number of quantities posted based on date For Example. Plant____Storage Location__Current_Qty_______>1 day Qty_______>5 days Qty_______7 days Qty. 0001_____AGC01_____________10_______________6___
-
Any help with this issue would be greatly appreciated, as I will NOT pay for the movie again as it was already purchased.
-
PCI Simple Communications Controller not working
PCI Simple Communications Controller not working on hp pavilliong6-1003tx