Inspections for Iron incoming and out going materials.
Hello Experts,
I am implementing SAP QM fro hpp iron industry, My requirement is user wants the inspections with respect to quantity basis of finished goods. They don't want all specifications to be recorded in the system. They want to accept the inspection lots on the basis of quantity of material. How to go about this, what are steps we need to follow for this scenario.
Can you share your thoughts would be highly appreciated.
Srini
Hi Reddy,
Please find my answers below marked in Bold.
1. For Incoming Materials they do not want any results recording to be done, only after UD stock should move to UR stock quantity basis. (which you have send me screen shots).
Follow the steps in the link already given which will meet your requirement.
2. The above screen shots are same for inspection type 04 ?
same thing will apply to inspection type 04 also
3. They wanted CoA, certificate of analysis at the time of delivery, but there are some specifications given for CoAs. Is this possible with the above two requirements or anything we need to configure more for certificates.
This is new question. as per the forum rules you should not post two different questions in the same thread. Kindly close this thread and open a new thread with the new question. If you want COA printing then you have to do RR for inspection lot. Without doing the RR from where you will fetch results to print on COA ???
Thanks
Kumar
Similar Messages
-
after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problemThere may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem. -
i am trying to link one of my accounts into my phone and am asked for incoming and outgoing mail servers. whats that then?
Your Internet service provider maintains the servers for sending and receiving email. Ask them for the prospered names of the servers and whether you need to enter your password and user name to send mail.
If you use gmail or some other web type email service they should provide that information to you as well. -
How to find Hot Mail incoming and out going Mail server info
I am a new users to the Mac. I want to get my Hotmail mail forwarded to Mac Mail. I have tried unsuccessfully to get through Hot mail their POP server Information for incoming and outgoing server address
Any ideas?
Thanks,
ChipfishHello, and welcome to the Discussions.
Do you have a paid hotmail account? I believe to use as POP requires the paid subscription, and then a plugin. See:
http://www.versiontracker.com/dyn/moreinfo/macosx/18189
See also:L
http://discussions.apple.com/thread.jspa?messageID=715851򮱋
Ernie -
Obtaining a call log of all calls incoming and out going from your website.
I do not have paper billing at this time and I am trying to get a list of all incoming and outgoing phone calls made from my home phone number on your website. Cannot get a hold of anyone from customer service on the phone. What steps are needed to take to get this information.
Thanks,
PatriciaYes. Call failed. Call failed Call failed. Constantly. I'm pretty sure it's iOS4.
I found this helpful.
http://www.tuaw.com/2010/07/22/ios-4-and-iphone-3g-is-a-match-made-in-whats-the- opposite-of/ -
Can't get my Cincinnati bell mail eve tho I have correct servers. It says pop3.fuse.net is not responding.
Contact the email account provider.
-
I want to configure my company email account in my iphone 4s but i couldnt with regular outlook paramenters. can any one help me?
SivaKKP wrote:
I want to configure my company email account in my iphone 4s
Ask your IT department. -
IHow to monitor Incomming and put going Mail Trafic..?
Dear all,
I am using (Sun Java(tm) System Messaging Server version 6.30.15).
I want to monitor All the in-coming mails and out-going mails.
Basically, i want to get an idea about , how many mails we are getting per day....etc... How many mails send via this mail server etc.
This statistic want to our management...
Is there any method or tool available for this monitoring.
Thanks.
VirajIf you add the "logging" option to the relevant channels in imta.cnf (or put it on the defaults line), you can use the imslog.pl script in the /examples/unsupported directory.
-
my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help
I'm having the same problem. I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer. I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it. Before I buy one on ebay I hope someone can assist.
-
Standard report for cheq incomming and chq ougoing.
Dear All,
urgent one please.
Is any standard report for cheque incomming and cheque ougoing with document wise.
if so pls suggest me.
awaiting your valuable suggestions.
Thanks & Regards,
satishkumar.mHi,
my doubt is in.tr.code fb02 and after putting doc type bp(bank payables) after executing that i will get screen showing details ie., doc no., year, type do.date and posting date.
my client wants outgoing cheq details ie., to who we have issued the cheques with cheque no, date, and bank.
if we go to drilldown report of fb03 we r getting but each and every entry they cant go and drilldown it..
we cheked in fchn but that requirement wont suit to my client..
can any one suggest me.
thanks & regards,
satishkumar.m -
Using the same client for both regfree and out-of-proc COM
Hi,
Here is the context:
1. We have the same set of COM objects that can be deployed as in-proc COM servers (dlls) or out-of-proc COM servers (exe). In-proc servers are called through regfree COM.
2. We have test projects that use the in-proc COM servers through regfree COM.
I would like to use the same test client projects for both regfree and out-of-proc COM servers (but not at the same time). For example, I would like to first run the client using regfree COM, then delete the in-proc dll and register the out-of-proc com server,
and then run the client again without having to recompile. But I have not found a way to do this.
Instead, what I have to do is modify the project settings of the test client project, removing the regfree stuff (the manifest dependencies) before I can use the test client project with the out-of-proc server.
Is there a way to do this without recompiling?
FYI, I have tried regfree COM by changing the client project's Project->Properties->Linker->Manifest file->Additional Manifest Dependencies, or by changing the client project's Project->Properties->Manifest Tool->Input and Output->Additional
Manifest Files. Either way works with regfree COM. And either way I have to remove those settings before making it work with out-of-proc COM (and hence recompiling, which is what I am trying to avoid).
Thanks,
NickTry Manifest Tool > Input and Output > Embed Manifest = No, and change Linker > Manifest File > Manifest File to drop ".intermediate" in the middle (or just rename the file after the build).
A manifest doesn't have to be embedded into the executable, it could be a standalone file named like ApplicationName.exe.manifest and sitting in the same directory next to the .EXE. Then you can simply delete or rename it back and forth to switch between
registered and reg-free COM.
Igor Tandetnik -
My email is though the college where I work. We use Outlook, and I am trying to set up my email but I am not sure what to use for my incoming and outgoing host information.
Ask your college. Most likely the same settings as you have set in Outlook.
-
When ever I open Adobe CC it starts verification process and asks for Serial No. And then goes into trial mode. I have to open it several times for it to run in proper licensed mode.
Sign in, activation, or connection errors | CC, CS6, CS5.5
Mylenium -
QM inspection for movement 321 and 322
Dear guru,
Presently there is one new requirement from our business wanting us to create an inspection type that will allow for users to use movement type 321 & 322 through MIGO.
Because the standard SAP setup (i.e. SPRO QM Quality Inspection Inspection Lot Creation Inspection for Goods Movement) for movement type 321 and 322 are not tied to any inspection lot origin, further, if I will to use u201Dcopy..asu201D method or hit create New method, the inspection lot origin field box is grey out and not allow input of inspection lot origin.
May I know how to resolve this issue? Or 321 and 322 should not involve QM? or other?
Thanks.
TuffTuffy,
What I have understood is, I try to re quote the same.
1. Your declare production and stock goes to quality inspection with 04 inspection type
2. You clear this inspection lot and post the stock to unrestricted use through QA32 / QA12
3. Now you want to reverse the production movement.
4. System doesnu2019t allow you to reverse this and throws error as u201CDeficit of stock in qualityu201D
5. If you try to cancel 321 material document system throws error as u201CMaterial document cannot be processedu201D
If above is the scenario then perhaps you have following 2 options
1. Document specific reversal
a. You need to implement SAP Note 175842
b. As a result of which you get a program in system, give inspection lot as reference.
c. System reverses the stock and posts back to quality inspection
d. Now if you try to cancel 101 material document (production reversal) through MBST, system will allow you.
2. Without document specific
a. Go to MB31
b. Input production order and opt for 102 movement.
c. Enter
d. Select the stock type as unrestricted. (default it would be X i.e. quality inspection)
Under ideal circumstances the need to use any of above options shouldnu2019t arise. If requirement is the production reversal, I think to stop inspection lot creation or use of MIGO / MB1B would not work as this eliminates the utilization of QM module.
Regards,
Anand Rao -
Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?
Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.
Maybe you are looking for
-
Using NVL in Query of Query resulting in error
I'm still using CF8 and Oracle 11G back-end. When I use NVL in the query of query I got error....Can't I use NVL to check on null value? Please help Here is my codes: <cfquery name="GetC2" datasource="#Trim(application.OracDSN)#"> SELECT CamID2,
-
I am a writer and send out links to my Internet articles to a mailing list. I assumed all received links were hyper links. A friend with a Mac was not receiving them as hyperlinks when I was sending them from my old G3 in Outlook Express. I am still
-
Best Method for Importing and Exporting Data to a local 'resrouce' file
I've searched the forum, and seen glimmers of hope to what I am trying to piece together - but not in a concise way that will sink into my brain. Using Javascript on a PC for IDCS2, I'm writing a simple script that has a user interface. I'd like to h
-
1.1 Taking 25 to 35 Seconds To Load Images
I upgraded to the current version of Aperture and everything worked smoothly until I started trying to edit raw images. Aperture is currently taking 25 to 35 seconds for each image to load before the editing tools become available. I've tried quittin
-
(Self explanatory, I hope.)