Inspector does not appear
The inspector does not appear if I click on the button on my Pages document. I also does not show up when I use View>Show Inspector. Nothing happens when I use View>New Inspector. The View>Hide Inspector option does become a choice after I try and view the Inspector.
Any suggestions?
Hi Peter, Sorry, I am new at using this type of forum. Actually, someone else who knows iWeb just came by and thinks it is a conflict somewhere and not that the inspector is hidden somewhere. I did try the toggle but it did not show me anything important.
Tomorrow the same person is coming by to trash my old iWeb and clean house before reinstalling it. At this point I am not even sure this is the software I want to use long term. Do you think it is okay for simple pages that need to be maintained regularly or do you recommend another program? Thanks Adele
Similar Messages
-
Movie Inspector Does Not Appear
Movie Inspector Does Not Appear anymore...no matter what...anyone else ever have this problem, and found a solution??..tried repairing permisions, disc, etc etc....
running qt 7.5.5, and if possible, I do not want to update...
Message was edited by: tigger5Hi Peter, Sorry, I am new at using this type of forum. Actually, someone else who knows iWeb just came by and thinks it is a conflict somewhere and not that the inspector is hidden somewhere. I did try the toggle but it did not show me anything important.
Tomorrow the same person is coming by to trash my old iWeb and clean house before reinstalling it. At this point I am not even sure this is the software I want to use long term. Do you think it is okay for simple pages that need to be maintained regularly or do you recommend another program? Thanks Adele -
imported a drum track from bin to arrange area. It will not follow tempo of the project even though it was recorded in this project. The 'follow tempo' box in the inspector does not appear even though it is present on other tracks in the file.
how do I set up the track so the 'follow tempo' box appears in the inspector?Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on. -
VS2013 Page Inspector does not use external script files
If I use an external javascript file, the Page Inspector does not appear to run the javascript (as the styles created during runtime are not visible). If I run the web page outside of VS (e.g. IE) then it works.
<script type="text/javascript" src="border.js"></script>
However, if I use an internal script, the styles are created as expected.
<script type="text/javascript">$("div").css("border", "2px solid red").add("p").css("background", "yellow");</script>
Is the Page Inspector supposed to use external script files, and if not, are there plans to support it?Hi,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because Page Inspector feature is more related to ASP.NET Application/Technology, in order to resolve your issue better,
I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/ for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
OpenBrWindow Help Needed - Clickable Hand Does Not Appear
I have created a new window that opens upon clicking any of
the photos referred to in the code below. All works well, HOWEVER,
when one rolls over the photos, the "hand" indicating the object is
clickable does not appear. Is there something I have left out of
the code? How can I fix?
Any help greatly appreciated. Thank you!
Denise
<img src="../images/Source/About Us/Jay Betz.jpg"
width="95" height="159" style="margin:10px 55px 10px 55px;"
onclick="MM_openBrWindow('management-bios.html','Directors','location=yes,menubar=yes,scr ollbars=yes,width=905px,height=650px')"
/><img src="../images/veritcal-line.png" width="2"
height="180" /><img src="../images/Source/About Us/Denise
Mason Chambers.jpg" width="95" height="159" style="margin:10px 55px
10px 55px;"
onclick="MM_openBrWindow('management-bios.html','Directors','location=yes,menubar=yes,scr ollbars=yes,width=905px,height=650px')"
/><img src="../images/veritcal-line.png" width="2"
height="180" /><img src="../images/Source/About Us/Michelle
Choquette.jpg" width="95" height="159" style="margin:10px 50px 10px
55px;"
onclick="MM_openBrWindow('management-bios.html','Directors','location=yes,menubar=yes,scr ollbars=yes,width=905px,height=650px')"
/>You have applied the behavior directly to the <img> tag
<img src="../images/Source/About Us/Jay Betz.jpg"
width="95" height="159"
style="margin:10px 55px 10px 55px;"
onclick="MM_openBrWindow('management
Don't do that. Remove the behavior. Then select the image.
Enter "#" in
the Link field of the Property inspector. Press Tab to cement
that change.
Now your image is wrapped in an Anchor tag, e.g.,
<a href="#"><img ...></a>
With the image still selected, click on the <a> tag
directly to its left on
the tag selector, and now apply the behavior. It will be
applied to the
anchor tag, and you will get the finger, so to speak.
Alternatively you can move the code manually. Change this -
<img src="../images/Source/About Us/Jay Betz.jpg"
width="95" height="159"
style="margin:10px 55px 10px 55px;"
onclick="MM_openBrWindow('management-bios.html','Directors','location=yes,menuba
r=yes,scrollbars=yes,width=905px,height=650px')" />
to this -
<a href="../images/Source/About Us/Jay Betz.jpg"
onclick="MM_openBrWindow('management-bios.html','Directors','location=yes,menuba
r=yes,scrollbars=yes,width=905px,height=650px');return
false"><img
src="../images/Source/About Us/Jay Betz.jpg" width="95"
height="159"
style="margin:10px 55px 10px 55px;" /></a>
(I added a little bit there to make your link work even if
javscript is
turned off in the browser)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dmchambers" <[email protected]> wrote in
message
news:[email protected]...
>I have created a new window that opens upon clicking any
of the photos
>referred
> to in the code below. All works well, HOWEVER, when one
rolls over the
> photos,
> the "hand" indicating the object is clickable does not
appear. Is there
> something I have left out of the code? How can I fix?
>
> Any help greatly appreciated. Thank you!
>
> Denise
> <img src="../images/Source/About Us/Jay Betz.jpg"
width="95" height="159"
> style="margin:10px 55px 10px 55px;"
>
onclick="MM_openBrWindow('management-bios.html','Directors','location=yes,menuba
> r=yes,scrollbars=yes,width=905px,height=650px')"
/><img
> src="../images/veritcal-line.png" width="2" height="180"
/><img
> src="../images/Source/About Us/Denise Mason
Chambers.jpg" width="95"
> height="159" style="margin:10px 55px 10px 55px;"
>
onclick="MM_openBrWindow('management-bios.html','Directors','location=yes,menuba
> r=yes,scrollbars=yes,width=905px,height=650px')"
/><img
> src="../images/veritcal-line.png" width="2" height="180"
/><img
> src="../images/Source/About Us/Michelle Choquette.jpg"
width="95"
> height="159"
> style="margin:10px 50px 10px 55px;"
>
onclick="MM_openBrWindow('management-bios.html','Directors','location=yes,menuba
> r=yes,scrollbars=yes,width=905px,height=650px')" />
>
>
> -
I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.
Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M. -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
BPM Application Link does not appear in BPM Workspace (11.1.1.7)
I spent huge amount of time to reveal why does that happens.
All that follows further is valid for BPM Suite 11.1.1.7.
The scenario.
You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
But the application link did not appear in BPM Workspace.
Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
Else the Appication Link will not appear.
One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
The second find is a bug (is think so).
If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
If you look to organization.xml you will see something like this:
<ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
<ns5:name>StartTask.InitRole1</ns5:name>
<ns1:processRole id="InitRole" name="InitRole1"/>
</ns1:applicationRole>
The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
After that "applicationRole id" != "applicationRole name" and the Link does not appear.
How to fix?
Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
In that case the associated swimlane will have the same name as the "applicationRole id".
Hope this helps somebody
OlegFlash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually. -
File Place does not appear on my menu. Neither does Tools Photoshop Image processor.
In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all. I have reset the preferences numerous times and am good to go until I shut down my computer. When I reboot they are gone again. I have a Mac with OS 10.10.2 (Yosemite) and CC.
Mardi Carter wrote:
I shut down using "Shut Down" under the Apple menu.....always…
Well, that's fine for the OS, but sometimes not so great for Photoshop. Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
Forget about "it had never happened before", Yosemite is a work in progress. Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5. That has proven to be the nature of the beast. -
Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.
I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help. -
I downloaded AirPlayIt yesterday from the app store. It was on my iPad yesterday. Today, however, the app icon does not appear on my home screen. When I go into apps it is there but it doesn't have an "Open" choice. There is only a cloud with an arrow pointing down. When I click on the app it pops up but there is no open button. How can I remove it? Tapping it won't work as it isn't on my home screen.
You'll have to contact the developer about this. Apple doesn't make this app;
-
Media Manager does not appear on my second stb
I downloaded Verizon Media Manager and installed it without problems. When I checked my HD stb the program is listed and I could use it. I do not have any kind of recorder on the network. When I check my non HD stb the VMM does not appear. This is the unit I want to use as it will allow me to play music through the home theater sound system.
So, am I limited because I do not have a recorder or does the feature not work on non HD stb? If this is the case, I might as well delete the program from my PC.
Solved!
Go to Solution.Hi. I apologize for the inconvenience. Unfortunately at this time, the standard def STBs do not work with Media Manager. It doesn't have to be a DVR, but the stb has to be an HD box. If you do not wish to upgrade the STD box at this time and depending on your setup, you can always swap the STBs and move the media manager functionality to where you want it.
-
I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks.
Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
http://support.apple.com/kb/TS1567
More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495 -
My ipod works in itunes but does not appear in "my computer" after I changed the properties
My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support -
The edit JSP page does not appear...
Hi!
I make a simple JSF application, I would like to show a DB table in a h:dataTable component and edit a given row after click, but the edit JSP page does not appear. I click the on link in the table, but the list is loaded again and not the edit page...:(
(no exception in application server console)
Please help me!
my code:
**************************************** listmydata.jsp***************************
<h:dataTable
value="#{myBean.myDataList}"
var="myDataItem"
binding="#{myBean.myDataTable}"
>
<h:column>
<f:facet name="header">
<h:outputText value="Ajdi"/>
</f:facet>
<h:commandLink action="#{myBean.editMyData}">
<h:outputText value="#{myDataItem.id}"/>
</h:commandLink>
</h:column>
********************************* MyBean.java *******************************
package bean;
import java.sql.Connection;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
import javax.faces.component.html.HtmlDataTable;
import javax.faces.context.FacesContext;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
import wrapper.MyData;
public class MyBean {
private List myDataList;
private HtmlDataTable myDataTable;
private MyData myDataItem;
protected Connection Conn;
// *********************** actions ***********************
public String editMyData() {
myDataItem = (MyData)getMyDataTable().getRowData();
return "editmydata";
public String saveMyData() {
try {
updateDataInDB();
catch (SQLException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
catch (NamingException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
return "listmydata";
// *********************** setter ***********************
public void setMyDataList(List myDataList) {
this.myDataList = myDataList;
public void setMyDataTable(HtmlDataTable myDataTable) {
this.myDataTable = myDataTable;
public void setMyDataItem(MyData myDataItem) {
this.myDataItem = myDataItem;
// *********************** getter ***********************
public List getMyDataList() {
if (myDataList == null || FacesContext.getCurrentInstance().getRenderResponse()) {
loadMyDataList();
return myDataList;
public HtmlDataTable getMyDataTable() {
return myDataTable;
public MyData getMyDataItem() {
return myDataItem;
// *********************** others ***********************
public void loadMyDataList() {
try {
getDataFromDB();
catch (NamingException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
catch (SQLException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
void getDataFromDB() throws NamingException, SQLException {
myDataList = new ArrayList();
java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement("SELECT id, name, value FROM BEA_JSF_SAMPLE");
PreStat.execute();
java.sql.ResultSet Rs = PreStat.getResultSet();
while(Rs.next()) {
MyData OneRecord = new MyData();
OneRecord.setId(Rs.getLong(1));
OneRecord.setName(Rs.getString(2));
OneRecord.setValue(Rs.getString(3));
myDataList.add(OneRecord);
void updateDataInDB() throws SQLException, NamingException {
String sql = new String("UPDATE BEA_JSF_SAMPLE SET name=?,value=? WHERE id=?");
java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement(sql);
PreStat.setString(1,myDataItem.getName());
PreStat.setString(2,myDataItem.getValue());
PreStat.setLong(3,myDataItem.getId().longValue());
PreStat.execute();
ownGetConnection().commit();
Connection ownGetConnection() throws SQLException, NamingException {
if (Conn == null) {
InitialContext IniCtx = new InitialContext();
DataSource Ds = (DataSource)IniCtx.lookup("JDBCConnectToLocalhost_CRS");
Conn = Ds.getConnection();
return Conn;
******************************* editmydata.jsp *****************************
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<html>
<body>
<f:view>
<h:form>
<h:panelGrid columns="2">
<h:outputText value="Name"/>
<h:inputText id="name" value="#{myBean.myDataItem.name}"/>
<h:outputText value="Value"/>
<h:inputText id="value" value="#{myBean.myDataItem.value}"/>
</h:panelGrid>
<h:commandButton action="#{myBean.saveMyData}" value="Save"/>
</h:form>
</f:view>
</body>
</html>I have put his lines in the faces-config.xml and now it works:
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>editmydata</from-outcome>
<to-view-id>editmydata.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>listmydata</from-outcome>
<to-view-id>listmydata.jsp</to-view-id>
</navigation-case>
</navigation-rule>
I don't understand, that I define the next JSP page in the bean java file, which must be shown, but I must define this in the faces-config.xml as well.
for example:
public String editMyData() {
myDataItem = (MyData)getMyDataTable().getRowData();
return "editmydata";
is it right or Do I make a mistake somewhere?
Maybe you are looking for
-
so basically this morning I rented planet of the apes the new one and have been having some sort of difficulty getting it to play it wont open in itunes suggests I use quik time which I downloaded and when I go to use that there is no visual or Audio
-
Partial submit in a jsf fragment is not working
Hi, i have a jsf page that is hosting a jsf fragment (using workflow), inside the jsf fragment i have a button that has partial submit = true, and an output text that has partial triggers pointing to the button. the button on the fragment page has a
-
hiiii experts, As per ur suggestions i have initially gone through with the existing threads but could not find the exact solution for my query. when i am trying to issue a A/R Credit note with reference to return document i am ge
-
dear all, does rman take the backup of already backed up archive logs again and again? your help appreciated. thanks and regards.
-
hi, I have 3 Server. Srev1 Serv2 Serv3 Serv1>Serv2>Serv3 Serv1 is source & Serv2 is Target. while Serv2 is source & Serv3 is target. My question is that i have 2 extract processs & 2 data pump process & 2 Replicat process. I just wanted to know that