Inspector does not show

I have done all the options as mentioned in the following topic:
http://discussions.apple.com/thread.jspa?threadID=1935482
But my inspector is just gone!!
It is amazing and anoying. Please help!

Have you ever had a second display attached?

Similar Messages

Inspector does not appear

The inspector does not appear if I click on the button on my Pages document. I also does not show up when I use View>Show Inspector. Nothing happens when I use View>New Inspector. The View>Hide Inspector option does become a choice after I try and view the Inspector.
Any suggestions?

Hi Peter, Sorry, I am new at using this type of forum. Actually, someone else who knows iWeb just came by and thinks it is a conflict somewhere and not that the inspector is hidden somewhere. I did try the toggle but it did not show me anything important.
Tomorrow the same person is coming by to trash my old iWeb and clean house before reinstalling it. At this point I am not even sure this is the software I want to use long term. Do you think it is okay for simple pages that need to be maintained regularly or do you recommend another program? Thanks Adele

Bridge does not show VC status in Thumbnail

Hi,
since migrating to a new laptop, Bridge CS3 does not show the VersionCue status icons under the thumbnail, only in the inspector panel. I cannot find any hint in the docs how to get the status icons shown again. Any ideas?
Cheers
Thomas

Being able to see at a glance which files are checked out/by whom below each thumbnail would be infinitely valuable, and is therefore not an option in Bridge Thumbnail Preferences. :)
If you enable Tooltips in Thumbnail Preferences, the Vc status is shown there, but one still must click or hover over each and every file to get the real Vc status. And of course, as you pointed out, the Vc status is always available for individual files in the Inspector Panel.

Movie Inspector Does Not Appear

Movie Inspector Does Not Appear anymore...no matter what...anyone else ever have this problem, and found a solution??..tried repairing permisions, disc, etc etc....
running qt 7.5.5, and if possible, I do not want to update...
Message was edited by: tigger5

Hi Peter, Sorry, I am new at using this type of forum. Actually, someone else who knows iWeb just came by and thinks it is a conflict somewhere and not that the inspector is hidden somewhere. I did try the toggle but it did not show me anything important.
Tomorrow the same person is coming by to trash my old iWeb and clean house before reinstalling it. At this point I am not even sure this is the software I want to use long term. Do you think it is okay for simple pages that need to be maintained regularly or do you recommend another program? Thanks Adele

TIFFs does not show in Preview app or DVDSP

I'm rendering TIFFs for subtitles using Belle Nuit.
The TIFFs (either TIFF-RLE for Final Cut Pro or TIFF-DVD for DVDSP) are generated just fine.
But they do not show when using the default Preview. Preview Inspector just says "No document"...(!)
I can view them just fine in Photoshop, QuickTime player 7 or other apps.
And the TIFF-RLEs works just fine in Final Cut Pro (but I can't look at the TIFFs beforehand using Preview).
Now, the problem really is that DVDSP does not show the TIFFs/subtitles at all - and that's a problem. The STL Graphics file works just fine. The TIFFs are placed on the Track just fine, but they do not show at all.
What might have happened? Checking one of the TIFFs, I have read/write access to the file.

Problem solved - semms like Apple did a change in the system-wide TIFF importer, that caused the TIFFs generated to be seen as 0x0 pixels in size.
The maker of Belle-Nuit have solved the issue in the 2.1.0b1 beta.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
I'm not sure if anyone else has this trouble, but it is a bit of a pain!

Flash control skin does not show in Golive

Mac OS 10.4.11 GoLive CS (1) - I have a flash file (.flv) that works well - see initial test without an applied skin - http://www.artdesign.org.uk/test - but with a couple of problems for the actual replacement intended for the correct site.
Problem 1. The controls skin I attached to the yell_video.flv when converting to a yell_video.swf in Adobe Flash program does not show in Golive, as the actual video does not show either I assume this is normal. I have the 3 files sitting in the 'web content/graphics' folder on the site - yell_video.flv - yell_video.swf - SkinUnderAll.swf - but can not see a means of 'attaching' the skin file to any field in the Inspector Palette. When I run it in a browser the error message comes up, with a dismiss or continue option, click either and the video plays fine but without the skin.
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2035: URL Not Found. URL: SkinUnderAll.swf"]
Problem 2. When the site is first encountered as a user there is a momentary white box where the flash yell_video.swf sits. I have made sure that when converting the .flv file in the Flash program I made the background the exactly same colour as the web page it sits on. The white is then momentarily followed by the blue colour that is not quite the same as the page background I stipulated.

After much messing around I have found a solution to one of my own problems.
The SkinUnderPlayStopSeekMuteVol.swf file generated from the exporting of the Flash yell_video.swf from the yell_video.flv file should sit in the same folder as the html page the video has been inserted in. In my case I had all 3 files in a folder entitled 'graphics' which is what caused the problem.
I still have a problem with the momentary white box where the flash yell_video.swf sits when first opening the site.

Miix 3 does not show battery status in Taskbar

Hi,
I own a new Miix 3 that works w/o problems. But it does not show the current battery status in the task bar or anywhere else. I checked windows' Device manager. There is no battery listed, only the external power device. I assume Windows 8.1 does not recognize the tablets' battery or the driver is missing. It seems the software/drivers is up to date.
Does anyone else have the same problem or see a solution for that problem?
Thanks in advance,
Kauzi

Being able to see at a glance which files are checked out/by whom below each thumbnail would be infinitely valuable, and is therefore not an option in Bridge Thumbnail Preferences. :)
If you enable Tooltips in Thumbnail Preferences, the Vc status is shown there, but one still must click or hover over each and every file to get the real Vc status. And of course, as you pointed out, the Vc status is always available for individual files in the Inspector Panel.

New page does not show up

Hello: I have a web site hosted on Mobile Me. Tonight I added a new page to it. I placed the new page as the first page. I saved the site and published it, but the new page does not show up on the internet. Using the Inspector, i "included the page in the navigation menu," although i do not have the navigation menu displayed. Even with this step, the new page is not visible on the website on the internet. I cannot figure out what else to try. I have hit "publish entire site" and that did not make any difference.
any advice would be much appreciated
Thank you.

Some hosting services are more problematic than others and it's difficult to choose.
I use Host Excellence because they have all the features you need and really good 24/7 tech support - better than GoDaddy.
The ultimate business account gives you way more than MobileMe for about the same price....
http://www.iwebforbusiness.com/Tools-Resources/Website-Hosting.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

I have an apple iphone 4 that I want to download audio books from my library onto it. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
Are the files lost forever or can i recover them by going to a shop or using a software?

Thank you for responding.
This might sound stupid since i'm not really knowledgeable with Macs,
but since all my files were moved from my mac computer to the external hard drive,
is it possible to recover those files through my Mac - like recovering deleted files?

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements? [tags]

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements. I use Elements as my organizer and Bridge to view as it is much more user friendly. Anyone any solutions??

Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

Adobe Creative Cloud does not show all my apps as registered.

Adobe Creative Cloud properly shows my Adobe Photoshop CS6 as registered. However, it does not show my Adobe Acrobat XI Pro, or my Adobe Photoshop Lightroom 4.4 as registered. How can I get these programs to be properly registerd as "MY APPS" in Adobe Creative Cloud? I am running Windows 8 and have had photoshop for a number of years. I installed Acrobat XI Pro in December, but it has never been recognized in Adobe Creative Cloud as registered.

Hey Pete,
I'm not sure why Acrobat XI is not recognized. It is on my system. Maybe try uninstalling and reinstalling it.
You can uninstall through the OS
Control Panel > Programs & Features
and then reinstall it through the Creative Cloud app or https://creative.adobe.com/products

I subscribed to Creative Cloud for teams and LR does not show in AAM.

I have a licensed copy of LR4.4 installed along with CS6. Howeveer LR does not show in AAM and cannot be accessed. Please advise to solution.

Whaleybird1958 which operating system are you using? Please make sure you meet or exceed the system requirements listed at http://www.adobe.com/products/photoshop-lightroom/tech-specs.html.

Inspector does not show

Similar Messages

Maybe you are looking for