Inspector not enabling hyperlinks to be created

I am unable to create hyperlinks in any shape or form, (this is the first time I have tried it out on a website) whether to a photo or to text from a website, as all the options on Inspector are grayed out. I have seen a similar post but this refers to a file being deleted, being reinstated and then restarting iweb, and it has not been closed, so am not sure if this works or not.
Could anyone provide simple, specific instructions on what has actually gone wrong, and what I need to do to get this rectified? Thank You.

Jillyem wrote:
why is this?
Because much of iweb pages are rendered by javascript widgets and there are set rules for those widgets. In photos page, it is no hyperlinks.
Is there any workaround to get a similar set-up, so that I can display a list of photographs with captions and then have hyperlinks fro them, similar to a menu system, to a series of other photographs?
Yes, but you have to *know how iweb works and its widgets*, I've done all kind of things in photos page with my widgets leveraged from iweb wdigets, here are couple ex:
http://widgets.cyclosaurus.com/Lytebox/Photos.html
http://widgets.cyclosaurus.com/FancyZoom/Photos.html
those pages look pretty much the same as other photos ages, but my widgets change photos page thumbnails behavior, unfortunately no one here seems to understand iweb widgets.

Similar Messages

All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!

All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!

Hello
Please see notes and 4 attachments for your reference. Hopefully this information helps.
Maureen
what version of iPhoto are you using? 9.5.1
what system version are you running? OSX 10.9.4
what happens when you try to order? See attached picture. I want to share pics to FB & FLICKR etc
did you make sure you've selected the correct Print Products store in iPhoto's Advanced preference pane? YES
what fixes have you tried? Restarted computer. I'm not very computer savy. I have had no problems with this in the past.
where is your library located? I have not moved anything for iphoto.
did you apply any updates or upgrades just prior to the problem occurring? I can't remember
are you running a "managed" or "referenced" library? Not sure how to find this out
what type of Mac? iMac 2.5 GHz Intel Core i5
how much free space on your boot drive? 12 GB 1333 MHz DDR3 - I have an external hard drive 1 TB

I am working in windows 7 and I am trying to enable the copy/paste and I can not find user.j file in the profile and I am not real sure how to create a file, I can create a folder .

I am trying to copy text from a word document and paste it into my web builder and it says that firefox does not support copy/paste from clipboard. Went to your site and it tells me to open the user.j file in my profile. This file does not exist and I am not real sure how to create that file so I can paste the fix from your site into it.

I went to that link and added to firefox add on but it still does not work. I went to the add on option button for this but it told me that my MYSIWG widget was disabled. Does this have something to do with it not working and if so how do you enable it.

Poplist items not enabled for creating new records

In a multirow block where you can create a new record by clicking an item in an empty record, you can't click a poplist item: they are not enabled until a record is created. I's not a big deal but it makes the user experience somewhat inconsistent and awkward especially when the poplist item is the first one in the record. You also can navigate to it by tabbing from the last item of the previous record, only the mouse click doesn't work.
Any workarounds? This is Forms 10.1.2.3.0 and the behavior is the same using Jinitiator or Sun JRE.

Hi,
Okk, you will have to do two things. Create two trigger on block level on which you want to do your changes.
1. First trigger. (PRE-UPDATE)
In pre-update trigger u will have to write the complete insert statement into the same table with new req id. like
DECLARE
vReqNo DATA_TYPE;
BEGIN
SELECT MAX(REQ_ID)
INTO vReqNo
FROM your_table;
INSERT INTO your_table
(req_no, fields....)
VALUES
(vReqNo, :forms_values);
END;
2. Create 2nd trigger on block level (ON-UPDATE)
write in this trigger
NULL;
for viewing the inserted record. What u have to do is in ON-UPDATE after null; create one timer NO_REAPEAT.
and in timer u will have to set the block property to req_id = generated_req_id_from_pre_update_trigger and
execute_query;
hope it will work...
-Ammad

Create button not enabled in JCO Connections tab???

Hi all,
I have developed an appl that can connect to R/3 and retrieve the results from R/3.
In my http://sssvb:50000/index.html->
Webdynpro->Conent administration->local->myapp
I see that create button is not enabled, what to do?
How to enable that?
Please help me,
Regards,
Ganesh

Hi Rajit,
When i click on Check SLD Connection, it is not allowing me to enter the params(disabled). It contains some default params like for
Host Name:.........
port:-1
User:........
URL:http://-1/sld
When i click on StartSLD the result is "Page cannot be found", and when iclick on TestConnection, the result is
"SLD Could not be opened succesfully".
Also Create JCo Destination, Maintain JCoDestinations, Start Assigned SLDs are disabled.
How to rectify all these errors.
Thanks in advance.

Create Item button not enabled in Personalization page

Hi All,
In one of the OA pages, I clicked "Personalize Page" icon and went to the personalization page. The following columns are not present in that page:
Create Item
Update Item
Delete Item
So I m not able to create any new items through personalization.
Let me know if someone has idea abt this.
Regards,
Pradeep

Hey Gyan,
Thanks.. After changing the profile option I m able to see the create item and update item icons in the personalization page.
Could you also please tell the impact of changing the profile?
Thanks,
Pradeep

BitLocker not Enabled on HP ElitePad 1000 G2

I have an HP ElitePad 1000 G2 that I am using MDT to apply our 8.1 x64 Update image. This task sequence works fine on all other systems on which it has run. On the ElitePad, when the task sequence completes, BitLocker is not enabled.
Running manage-bde-status returns:
Disk volumes that can be protected with
BitLocker Drive Encryption:
Volume C: [OSDisk]
[OS Volume]
 Size: 115.58 GB
 BitLocker Version: 2.0
 Conversion Status: Used Space Only Encrypted
 Percentage Encrypted: 100.0%
 Encryption Method: AES 128
 Protection Status: Protection Off
 Lock Status: Unlocked
 Identification Field: Unknown
 Key Protectors:
 TPM
If I look in the BitLocker applet on the control panel, it says "OSDisk (C:) BitLocker is waiting for activation"
the ZTIBDE.log just stops at:
Attempting to intiate ProtectKeyWithNumericalP@ssword
<Message containing password has been suppressed>
A successful system shows:
Attempting to intiate ProtectKeyWithNumericalP@ssword
Success protecting Key with numerical p@ssword
If I click Turn on BitLocker in the control panel applet or run the following commands:
manage-bde -protectors -add c: -recoverypassword
manage-bde -on c: -recoverypassword
The recovery key protector is created and uploaded to AD and BitLocker shows as enabled.
Any ideas to why this is happening?

after some more investigation, I found the following article
http://netecm.netree.ch/blog/Lists/Posts/Post.aspx?ID=80 and adding the registry key referenced in the article fixed the issue.

"Could not find the application that created this file" error when trying to combine files

I am working with a user that is trying to combine a pdf & word doc (docx). When they try to combine the files she gets the error: "Could not find the application that created this file" & "Please select a file created by an application that resides on your computer". The computer is running windows XP, with office 2010 SP1, & Adobe Acrobat Pro X.
Per previous suggestions, I have already checked to see if Adobe PDFMaker is enabled as a Word plugin, and it is.
Recentley the user was running Acrobat 6, and this error did not occur. It is only after upgrading to Acrobat X that this is happening. Any help with this issue would be appreciated.

This can also be caused if the files are in a folder deep in the file system. For example C:/xxxxxxxxxxxxxxx/yyyyyyyyyyyyyyy/zzzzzzz/aaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbb /cccccccccccccccccccc/dddddddddddddddd/eeeeeeeeeeeeeeeeeeee/ffffffff/ggggggg/hhhhhhhhhhhhh hhhhhhhhhh/myPDF.pdf
At some point Adobe PDFMaker cannot handle the path length (also, Windows can't handle the path length either eventually)
Solution: move the files to a shorther path (perhaps the desktop) and try from there.
I am filing a bug report with Adobe. A descriptive exception message should be thrown instead of "could not file the app.."

Got error: Location Code is not enabled in the XML Gateway Server

Hi,
When I perform Compliance rule screening on GTM - Globel Trade Management,that I defined GTM as an Trading Partner on EBS R12.1.3,
GTM can send response to EBS,but I see the following error message via Transaction Monitor on EBS workflow:
[The Standard:OAG, Transaction Type:ITM , Transaction SubType:EXPORT_COMPLIANCE and Location Code GTM6.2 is not enabled in the XML Gateway Server. Pls check your Setup.]
On EBS,I defined an ITM Partner for GTM,named 'GTM6.2',according to the document created by you: ITM Setup.doc
and I also finished the following steps:
1. ITM Application Users
2.ITM Partner Service Types
3.ITM Parameter Setup
4.Order Type Creation: ITM Only
5.Customer Creation: create a customer named 'GTM6.2', also enter 'GTM6.2' as EDI Location
6.Define Transactions on XML Gateway as following:
<Header>:
Party Type: Customer
Transaction Type: ITM
Transaction Sub Type: EXPORT_COMPLIANCE
<External Transactions (Lines)>:
Standard Code: OAG
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Queue: APPLSYS.ECX_IN_OAG_Q
7.Define Trading Partners on XML Gateway as following:
<Header>:
Trading Partner Type: Customer
Trading Partner Name: GTM6.2
<Trading Partner Details>:
Transaction Type: ITM
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Map: WSHITEIN
Source Trading Partner Location Code: GTM6.2 (same as the value what defined in EDI Location for customer)
I think the combination of External Transaction Type, External Transaction Subtype, Standard Code,Source Trading Partner Location Code
should be existing once done above steps, I have no idea why the error prompted.
Does someone can tell how to trace the error?
Thanks,
Rambler

user12254038 wrote:
Can you send any supporting documents on ITM Setup? My client is implementing ITM for the first time and I wanted to know more details on how it works in R12.1.3 version of EBS?Oracle International Trade Management (ITM) Partner Integration: Specifications [ID 572524.1]
International Trade Management Integration [ID 259691.1]
How Can I Tell if International Trade Management is Installed or Not? [ID 742539.1]
What are the Required Setups for International Trade Management (ITM) Flows in Shipping Execution? [ID 782861.1]
What Patches Provide the Latest Fixes and Enhancements for ITM Adapter? [ID 465122.1]
How to Generate Debug Information From ITM Adapter for XML Processing [ID 738925.1]
How to Generate Debug File for International Trade Management (ITM) [ID 1294853.1]
Thanks,
Hussein

ACL is not enabled for this user OSX 10.5

I am running OS X 10.5 on a Mini Mac.
It was a clean install, everything went smoothly except for configuring the mail server.
I created my users as I normally do using Workgroup manager.
However 2 out of 3 of users I created can not log into the IMAP server.
You get the error message ACL is not enabled for this user.
What is the ACL and how do I enable it ?
Thanks
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user

Hi there
I had the same problem and I found this post which fixed it:
http://discussions.apple.com/thread.jspa?threadID=1244694&tstart=0
Hope it works for you too!
Chris

RH8 Linked Word 2007 docx - not all hyperlinks convert

I'm brand new to RoboHelp. I'm linking Word docs instead of importing, and some Word cross-references are not turning into RH hyperlinks. Most of them work just fine. The ones that don't work look like hyperlinks; they are blue and bold (picking up the correct style from Word) but when I check the HTML, there is no code for a link. All the links in Word were created the same way: cross-references to Headers. Many, but not all, of the dead links have the first letter underlined. Some functional links have the first letter or word underlined too, as well as the whole link underlined.
Do only certain levels of headers convert to links (e.g. H1 and H2 only) or is there a maximum number of links allowed per Word docx? Why are only fragments of the links underlined? I saw a few related questions in forums about hyperlinks not converting at all, but most of mine did convert. If none of them had, I'd know I was missing a switch somewhere, but since most of them work, and they were all created the same way, I'm not sure how to fix.
The Word documents were created by converting FrameMaker 7 documents to FrameMaker 9, then exported as RTF (the export from Frame 7 was not really usable). I created a Word template, created new documentx from it, then copied the RTF text. The cross-references all had to be redone, as the links in Frame were not to headers, but to manually created bookmarks.
I'd really like to keep the source docs in Word, so that I don't have to make all the future updates myself (the coders already use Word; they have no time to learn RoboHelp). Any suggestion would be much appreciated.
Thak you, Debbie @ Tronia Systems

Hi Susie,
I've been pulling my hair out for two days over these darn links that won't convert
I have Headings level 1-5 in my Word docx. The project settings in RoboHelp specify to create new HTML pages for Headers 1, 2, and 3. It is some, but not all, of the Header level 4 and 5’s that are not converting to links in RH. I don’t know if that has anything to do with it or not. That's the frustrating part – if ALL the Header 4 and Header 5’s didn’t convert, that indicates one kind of problem. But most of them DID convert. And they were all created the same way!
In Word 2007, creating cross-references to headers was the easiest way to create my links, so I created all of them that way. For the stubborn ones that just wouldn't convert to RoboHelp, I tried every other way I could think of to create links. This is the only way I could get them to work:
From the Insert ribbon, click Hyperlink instead of Cross-Reference
Link to: Place in this document
Select place: pick the header destination
It takes much longer this way, but it works. If you come up with a more streamlined solution, please feel free to share
-Debbie

Fire Fox no longer applies my UN and PW when I open a site. The function is not enabled. All PS are still showing in tools, options.

I have several site that have User names and Pass Words assigned and saved in tools, options. Fire Fox no longer applies these when I open the site. When I look at tools, options the "Remember passwords for sites" is not enabled. How do I re enable this function.
This happened after a bout with some malware from a program called Torch.

Do you see this Torch program in the Windows Control Panel or are there other programs that were installed recently?
*Control Panel > Programs > Programs and Features > Uninstall or change a program
*Click the Installed column to sort by this heading
Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
Your System Details List shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
See also:
*http://kb.mozillazine.org/Preferences_not_saved

Property inspector not working in fireworks

Hi folks,
I am using Fireworks CS 5.1 on a MAC Pro. I haven't used Fireworks in ages but I can't for the life of me figure out where the Property Inspector has gone. I'm creating a very simple button. I put a simple line of text on my page, a box and a line. I have selected each one and then clicked the Windows menu and clicked Properties. The Properties box appears but it has nothing in it. Doesn't seem to matter what I click on there are no properties showing up.
Any ideas?
Thanks
Sylvia

A lot of glitches in Fireworks can be solved by deleting the preferences file. First you will have to make sure your Library folder is viewable and you are accessing the root folder on your hard drive. In recent releases of Mac OS, it is hidden by default.
First, show your Hard Drive by following these directions:
In the Finder, choose Preferences from the Finder menu.
Click the General icon on the toolbar.
Select "Hard disks" in the "Show these items on the desktop:" section.
Close the Finder Preferences window.
Next, you'll have to unhide the library folder by following these instructions:
In the Finder, choose View > Show View Options (or press Command-J).
Near the bottom of the resulting View-Options palette is a setting called Show Library Folder. Enable this option. Your Library folder is immediately visible.
In that folder, find the Preferences folder. Then in the preferences folder, find the file with this name (or similar): "com.adobe.Fireworks.12.0.0.plist" and delete it.
Restart your machine and Fireworks and your problem may be solved.

Enabling end users to create and upload their own layouts for PDF reports

Using the PDF printing features in APEX 3.x and BI Publisher, you can create professional looking report designs with no programming knowledge, simply by using the built-in wizards of the BI Publisher Word Plug-In, and a little knowledge of how to use MS Word. The nice thing about using the Word Plug-In is that even the end users of your APEX applications could potentially do this. The only problem is, that typically those report layouts are stored under the Shared Components of your application, and end users generally don't have access to the Application Builder, all they typically use is your APEX application. So then why not simply add an interface to your APEX application that lets your end users upload their own layouts and dynamically link them to APEX report queries at runtime? I put together a sample application that demonstrates this technique, you can try it out on apex.oracle.com or download the application and try it on your own APEX instance. Here's the link to my Blog with more information:
http://marcsewtz.blogspot.com/2008/05/enabling-end-users-to-create-their-own.html
Regards,
Marc

Hi Marc,
Very nice app. I tried to create a new template with success.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Syslog not enabled by default in systemd setup

I installed Arch Linux from the 2012.10.6 iso, using systemd, and following the new, lengthy instructions. Made separate partitions for /var, /boot, and /home. Used btrfs on all of them. The system works fine, so far, except that most of the log files are missing. dmesg works. I intend this machine to be a server, so it has php-fpm and Apache, but not X Windows.
This is what I have in /var/log:
btmp faillog httpd/ journal/ lastlog old/ pacman.log php-fpm.log wtmp
Where is messages.log? Checking further, I found that the syslog (actually syslog-ng) service was never enabled. Soon as I activated syslog, messages.log and the rest of the usual files were created. Also, cron (cronie) was not enabled, which means no logrotate. Even if I missed something in the instructions, shouldn't syslog and cron be enabled by default?
Issues like this have me wondering if systemd is such a good idea. Making logging enabled by default ought to be easy enough to do, and shouldn't be a reason to back away from systemd. But systemd has other issues. It's Linux specific-- needs kernel features that are only in Linux. So it won't work with FreeBSD. From what I've read on LKML, the push towards systemd comes from the udev developers, who it seems are causing problems. udev was not supposed to depend on systemd, and now it will.

Have you read e.g. https://wiki.archlinux.org/index.php/Sy … md_Journal ?
The last paragraph of your post was unnecessary as it's a rant and the issues you raised were covered multiple times already.

Inspector not enabling hyperlinks to be created

Similar Messages

Maybe you are looking for