Inspire 5.1 5200 -- HELP!

^ Hello, i have problems with this product ''inspire 5.1 5200''. 3 of 5 speakers actually 3-entry of the speakers are not working.(there was no problem before i formatted my pc.) .Moreover, i lost the CD which was given with this product and i can't find the drivers ...even creative's site there is no driver or i can't find it..please help!

KokChoy-CL thanks for your advice but i do not think it
Is related to sound card or....,i mean sound card...is ok ; however , something is wrong about entries of the speakers. Before i formatted my pc ,i had decided to take off some speakers. Then i tried to use them again but there was no sound coming from 3 of the speakers.After that i tought format would fix it but it did not work although i set everything properly. Today i format my pc again...and i noticed that the working-2-entry of the speakers are not working and the other non-working-2 entry of speakers are working (there is no problem related to speakers,they are all fine). I really do not know what to do. One more thing,when i take off the centre subwoofer's cable, the centre speaker and left and right speakers are working but when i put on centre subwoofer's cable 3 of the speaker including centre speaker are not working and the other 2 of the speaker are working.Could anyone tell me how to fix this problem? If you have no idea ..can you tell me how can i get the CD which is given with this product or there is sound control program (which is in the CD) i barely remember..''soundmax...'' or something else..Does anyone know how can i get that program? Thanks for your attention..

Similar Messages

Inspire 5.1 5200: Problem with Connectivity

Can anyone help me in connecting my portable MP3 player to the speakers Inspire 5.1 5200. Mp3 player has only one output point and speaker got three inputs. Because of this I can only have the sound of one pair of speakers i.e either front, or rear or (woofer and the center)
Also can you please guide me how to connect it to TV with only two points for audio(L+R).
I am not a hardware/electronics expert, so could you please give me a detailed help.

Hi, This is Hon Wooi from M'sia.
I got an idea for u.. You can actually buy a Y connector.
This type of connector u can easily get from Shopping center. It have male and 2 female connection. so u can use the male to go to your MP3 player and the female to accept the two stereo jack for 2 front and 2 rear speaker.
this will be the same for TV.
Hope this info help. Thanks.

Inspire 5.1 5200 connectivity problem with lg dvd 5.1

:mansad:Hii All
Please help me out with one connectivity problem. Recently I purchased Creative Inspire 5.1 5200 speaker system with one LG DVD 5.
From the speaker sub woofer system three output comes out which are EP. Now the LG DVD have six input in the form as mentioned below: <- Centre Box // 2- Sub Woofer Box // 3- Front Left // 4- Front Right // 5- Rear Left // 6-Rear Right.
Now I have tried by fixing the EP to EP-RCA(2) converter and plugged in to all the six DVD input. But all in vain since sound from two speakers could be heard. Right now I have fixed all the three EP to/-> 2- Sub Woofer Box// 4- Front Right // 6-Rear Right. But the performance in audio level is not at all satisfactory.
Please help me out with proper connectivity.
Regards
ANINDYA
[email protected]

I bought this Inspire 5200 some six months back. I use it with DVD player and have used it with three different DVD players, but the problems I face while playing DVD is that I mostly receive sound in front speakers, center speaker and the sub-woofer only. I say mostly as at times I get sound in one of the rear speaker as well, but that is very rare. My right rear speaker is completely dead, I have not heard any sound out of that lately. I have connected the speakers properly and checked by chaging cables as well, but of no use. I tried changing the DVD players as well, and have set them correctly to output 5.1 channel sound, but of no use.
I feel I should take it to the service center. But then, I have heard a lot of complaints for the service center here in New Delhi in India, specifically that they take very long to get the product repaired or replaced (at times more than 2-3 weeks) and make you visit several times before giving you the product back. Don't no what to do? Any sugestions?

Only have sound for the 2 front speakers in Inspire 5.1 5200

January 9, 20
I have the Inspire 5.1 5200.
Listen music from the web site moov.now.com, only have sound from the 2 front speakers.
Would anyone help me to solve this problem
Thank you.
Regards,
Cheung

@URGENT
January 2, 20
Thanks for reply.
Could the 5+ speakers be sounded altogether as I always listen the music from some other web sites have such effect. Have any adjustments or others etc. made in order to have such effect for listen the music through Windows Media Player in the web stie of moov.now.com.
Thanks for your advice.
Thank you.
Regards,
Cheung

Inspire 5.1 5200, Rear Left and Rear Right no sound

I have the Inspire 5.1 5200 sound system hooked up to SB Audigy. I have Windows sound control panel and creatives panel configured to 5.1 speakers. Still there is no sound out of both rears. What is going on? Thanks in advance.

KillerTux,
Try enabling CMSS.
Jason

Inspire 5.1 5200 - Problem with headphones

I have an Inspire 5.1 5200 using Turtle Beach Santa Cruz.
Recently the right channel stopped working on the headphones. I at first thought the headphones were bad but checked another set and they also would not work on right channel. Tried both sets in another device and they work okay.
All speakers and sub-woofer work when not using headphones.
Only problem is with right channel headphone output.
Any ideas?
Thanks
JNT

I spoke with CL about the problem and they felt that it was the wired remote. The part is $9.99 + $2.99 shipping to lower 48.
I have not ordered it yet as I want to rule out other possible problems as much as possible.
Thanks for the responses.
JNT

Inspire 5.1 5200 developed sounds issues

Hello all, I've got a 2 month old set of Inspire 5. 5200s, and they started having real sounds issues. I get clear sound out of the front center, muffled sound out of the front left, no sound out of the other satilites, and overwhelming bass from the sub when I play media. I get clear sound out of my headphones in any jack I put them in, and similar performance from the speakers regardless of which jack I put them in. I'm not sure what's going on, and I really hope they're not broken. I'm running an Audigy 2 Plat on Xp sp. I've tried all the troubleshooting ideas from the web site and messed with my AudioHQ and control panel sound settings. Any ideas?

Okay, have done. I've connected my mp3 player to each of the speaker cords, and reci'ved no better sound. I get muffled bass out of the front and rear, and okay sound out of the center/sub cord. Alternati'vely, I've connected my headphones to all the jacks in the back, as well as the headphone jack on the volume controler and recieved good sound. This was all done on the 5.1 setting on both the control panel and Creative speaker settings.

Inspiration Browser not in Help menu - Elements 9 Mac

Mac OS 10.6.7.
Elements 9 has been installed/activated/registered and in slight use since November/10. Online update in January. No usage problems so far.
However...while exploring the program recently in Community Help to learn more, I came across the Inspiration Browser. It's supposed to be accessed via the Help drop-down menu, but it's not there. However, it's installed in what seems to be the appropriate folder (Applications/Adobe). When I launched it from there it opened, but an on-screen message said it should be launched from within the Edit workspace.
Chat support wasn't much help and suggested uninstall/reinstall, which would require resetting all my preferences, and I'm not sure IB is worth the effort. Chat gave me a tech 800 number. Before I go that route, any suggestions?
Thanks in advance.
wwj
PS: I don't think it's relevant, but just in case...Elements 8 is still installed on my setup..

Oh dear, how quickly unimportant things get complicated. The answer
to your question is no.
However, in my on-line search within the Adobe labyrinth for support
re my "issue" I began by signing in to my Adobe account, or whatever
it's called, and selecting my country (Canada). As I worked my way
through the support maze of questions to refine my query, it appears
that I was automatically transferred south of the border by the
support system. At no time was I informed that as a foreign national
I couldn't proceed. Curiously, if the IB is US-only, how was I able
to post without being flagged?
Anyway, let's not make a big deal out of no big deal. Are you able to
tell me if I have any on-line recourse within Adobe for addressing my
Elements 9 "issue"?
>Do you have a photoshop.com account from the US? The IB is US-only.
>

Inspire 5.1 5200 sub problem

Hello. I looked around for a while on the forum and the web trying to find some one else with a similar problem but haven't as of yet..ok here goes.
First a bit of background..
I bought the 5.1 5200 series speaker system around a year ago and haven't had a bit of problem until now. I have been using onboard sound for most of the time (ASUS P4C800-E Deluxe) until I started having this issue. After tinkering around a bit with it trying to fix the problem I grabbed my SB Live 24 bit card and installed it, thinking it may be the on board sound messing up. After installing and updating the same problem exists.
I am only getting sound from my sub and center speaker and it is very 'bassy'...umm a lot of distorted bass. I checked all my settings and it all looks good. I hooked the speakers up to another computer and have the same problem. I tried unhooking the other speakers, switching wires around and everything else I can think of, I am at a loss here. My headset still works great, sound is good through that. Also if I disconnect the Pink wire (Sub) from the sub then my center speaker plays ok, (still no sound from the other speakers) but the sub still has some sound coming from it. And it may be unrealted but it also seems that the sub is putting out more magnetism than usual (if that makes sense). ie, I notice distortion from it on my monitor (messes with the colors) from an area where it didn't do that before. I have come to the conclusion that the sub has simply 'gone bad' but I am hopeful that it hasn't. Anyway thanks in advance for any thoughts.

Fury76 wrote:
Thanks for your reply. I Emailed CL's Customer support and received a reply stating that I was outside of my warranty period so the only way they will help is if I call them and pay a support fee. I believe that the sub has just 'gone out' and all that would do is re affirm that. Guess I am gonna surrender here and junk the sub. The thing that bothers me most about this is why now? I can't figure out why the sub went out without any warning signs..just all at once. Oh well. Oh and yes, I do use a CRT (one of the few left) and won't be placing my next set of speakers anywhere near it...just in case that is it, and of course I don't want to ruin my monitor.
Oh by the way, should I simply try to replace the sub or just replace the whole set? Opinions welcome. Either way if anyone has a brand name suggestion please advise, this set of speakers is used on a gaming machine if that helps.
effects are temporary, if the monitor starts going purple move the magnet causing it for a few weeks and the monitor goes back to normal, well it does that immediatly, but wait a few weeks and you can place the sub in its old place and not affect the monitor, until it happens again, rinse and repeat
if you are a gamer I would recommend the G550W set, or the S750 if you want the "big uns"
I use the S750 myself, combined with Fatatlity card, loverly setup

About nokia 5200 HELP!

in the left of the nokia 5200 mobile phone theres a button in a sign of a musical note when i press it a mp3 music starts playing after it finishes it starts again from the begging i have like 3 mp3 songs at the music folder and just one of them starts playing when i press that button

Hi,
If you go to menu- media- music player - options - all tracks. Look and see if all 3 music files are there.
If not, go to music libary - update libary. This should update so all tracks in the media player. To check go back into all tracks and it should now show all the music files.
Hope this helps.
Cheers

How to get Realtek HD Audio to work with Creative Inspire 5.1 5200?

Hi,
I have a problem with correctly setting the Realtek HD Audio with my Creative Inspire 5200 5.1 speaker set. I don't get any sound on all of them when test button is clicked, only surround speakers work. They were working on my old PC. I did a search on this forum and Internet, but could not find any solution to this specific problem.
Setting:
* MSI drivers: 6.0.1.6267, directx 11, ALC 892
* Speakers set to default audio device
* Plugged in 3 jacks, colors matching (3 in a row - black:rear, orange: center/subwoofer, green:side speakers)
* On Realtek HD Audio Manager: Speaker configuration: 5.1 Speaker; Optional spakers: center, subwoofer, rear pair checked; full range speakers: front left and right and surround speakers checked; speaker fill/swap/bass management disabled.
What I get:
* left surround clicked: OK
* right surround clicked: OK
* No sound from others
Tests:
* Checked not muted
* Checked volume control, not set to zero
* Rechecked cables from MB to Creative Subwoofer
* Rechecked cables from Creative Subwoofer to speakers
* Checked other spaker configuration settings:
- Stereo : no sound
- Quadro: only surround spakers OK
- 7.1: surround spakers OK + left 2nd surround sound comes from right front speaker
Any directions are very much appreciated
Cheers
Bülent
PS: See signature for my setup

Quote from: syncman on 30-October-10, 03:10:54
I get something very similar with my Logitech 5.1 setup. However, I'm using a Creative Pro sound card. Some reminders for you. Remember that everyday normal sound is not encoded DD 5.1, i.e. Windows prompts, MP3, etc. 2 channel left and right stereo sound only nets 2 speakers even though you have 5.1. Unless you've set the sound card, or speaker controler to convert normal 2 channel left and right stereo to DD 5.1 you will only hear 2 speakers. It takes software that's dolby digital encoded to bring all 5.1 speakers to life. For example for every day computer sound my logitch speaker controller is set to "stereo x 2.1". With this setting the contoller sends 2 channel stereo to the front 2 speakers as well as rear 2 speakers plus the sub woofer. My center channel stays quiet until I change the controller effect to DD 5.1. I would change the speaker controller to DD 5.1 if I were to watch a DD 5.1 encoded DVD movie, or play a DD 5.1 encoded game. Keep in mind unless the software is encoded DD 5.1 anything you hear through all 5.1 speakers is SIMULATED! IMO the stereo x 2.1 sounds MUCH better than simulated DD 5.1.
Thank you for your answer, but I couldn't go so far yet I know some about sound and sound setups as I'm working in this area, namely video editing, sound processing, montage etc.
The problem is at "test button" level, somehow the mobo cannot drive the correct lines :(

Inspire 5500D vs GD580 - help me decide

Hi,
I am planning to buy a 5.1 speaker system and have short listed the following two
Creative Inspire 5.1 5500D
Creative Inspire 5.1 GD580
I will be connecting the speakers to my computer which has a SoundBlaster Live 5.1 sound card. I will be watching DVD movies on my computer, playing music and occasionally playing PC games. My computer will be my information as well as entertainment center. And probably I won't buy/use an Xbox/PS2.
In light of my above requirements, can somebody tell me choose the best. Money is not a problem.
I have read posts where users have complained of not getting digital/dolby output from these 2 speakers. All I want is the best experience from these speakers.
Thanks folks
rbc_geek

Hi! Either will work well. I have Tiger on one G4 and Leopard on the other. Leopard seems a little more stable to me but I don't mess with it much as I run Tiger mostly because of some apps I have that Leo won't run. 1gb of ram isn't overly generous with Leo since 512 is the min. Leo's more ram hungry than Tiger. Tom

Looking forApple Inspired iweb Theme - please help

good day to you
i love the apple site and i want to built a new website for my family and i want it to look like the apple site
i searched for something like this in google and can't find something i like
i saw this template :
http://www.pagelines.com/themes/iblogpro/
but it's for wordpress
can someone help me get and buy this theme for iweb?

You'll have to do a Google search for iWeb themes and see what you find out there. There are a number of sites that do offer themes but don't know if any of them are close to the Apple site. You may have to start with a blank white theme page and create your own.
OT

How to connect Asus mother board P5B sound card with Creative Inspire 5.1 5200 speaker system?

Hi, I am not sure how to connect them, as I find that there is no sound from centre speaker, please help me, thanks?

mg,
Have you check through your motherboard manual for the proper setup of your onboard audio with 5.1 speaker system?
Jason

Alternate Power Source for Inspire 5.1 5200?

I have started Rv'ing full time. Still have my 5.1 speakers, which I love, and a new laptop, which I semi-love. I do not love the stereo system built into the RV at all. I did not keep the stereo components from the house or the desktop as being too bulky. Now, I want to put my home theatre together again. I want to verify what I thinking before buying any new stuff.
1) The laptop has only a single output jack. I'm thinking an external sound card will take care of that, right? I already have a separate USB digital decoder with an optical plug on the component end. I guess I could put all that together with the television, but I'm just as happy watching movies on the laptop anyway.
2) The speaker system has a power supply listed as being a 2v - to 20 v inverter. When not plugged into city power, I use an inverter to convert 2v to 10 to power the laptop and appliances. But in the case of these speakers, I'd be...using an inverter to convert 2v to 10 in order to power a speaker system that was 2v in the first place? That doesn't make any sense to me. I have an engine battery and 2 deep cell 2 volt marine batteries with an isolator to power everything when I'm off the grid. Isn't it possible to just power my speaker system directly from my battery system like any other automotive speakers? And if so, isn't there a straight connector I could use for that?
Sorry for length and depth. I am (obviously) confused at this point.

Hi galletgun,
Thanks for your prompt reply, I agreed with your advice,unfortunately the subwoofer can not buy separately,it comes with the set of satellite speakers (5.1)which is considerably becoming expensive in my case.
In the instance somebody out here get a chance to open up the same type of subwoofer pcb board then it will be a big help for me if they have a time to check out for the color codings of the resistors R01,R04 and R05. I may get the system back in sound by replacing those resistors.
I hope the "Creative Customer Assistance" themselves have a time to review and consider this forum as a "feedback" for the quality of their products and services. It is very disappointing for a customer to scrap a unit caused by a single or few burned passive electronic components which is in fact can be repaired. I do not think there is a confidential issue in revealing components specification to the customers.
I will appreciate a reply from the moderator of this forum.
Best regards,
Edward

Inspire 5.1 5200 -- HELP!

Similar Messages

Maybe you are looking for