Inspire 5.1 5700 speakers are not recognized by Win7 64 with MSI HD audio and soundblaster Cinema

I have had this speaker system since it first came out. It has worked without a hitch with many computers but this one. It is an MSI 87-gd65 Gaming system with an Intel i5, 16mb ram on Win7 Pro 64. It shows all of the drivers are working well but it will not recognize the speakers even I use the digital coax or analog outputs.
The HD audio the SB Cinema drivers are loaded with the latest drivers. Win reports them all working well. It will support headphones.
I can't remember if there is a special driver just for this system.
Any thoughts would be appreciated.
Boris

Originally Posted by Colin-CL
Hi Boris,
The Inspire 5.1 5700 does not require any software driver updates. It is likely to be a sound setup or cable connection.
Check that you have selected the correct speaker setup under your Sound settings/Control Panel. Based on your description, you should have a Sound Blaster on-board audio solution. If you are updating any drivers, you should be downloading them from MSI's website as these are optimized for your specific system setup.
Regards,
Colin-CL
Hi ty Colin,
All of the cables are the ones that worked with the old computer system until they were switched to this new one. All drivers are up to date. The MSI tech gave up after an hour.
The Cinema driver only allows for a 7.1 setup but shows only a two speaker graphic. The old driver on the old machine allowed me to select the speaker configuration and even test them. The speaker selection in the driver area is greyed out. The headphone selection works just fine.
I have downloaded and installed the Cinema driver from MSI twice but with the same result. The driver says it is for the win7 64.
Is there something on the Cinema driver setup that I am missing?
thanks

Similar Messages

  • Speakers are not recognized while in OSX 10.7.3 can't restart without power button (don't know if they are related)

    I am willing to split up the two symptoms if they are not related. But I know the speakers aren't broken because I hear the Bong noise at boot, but to my misfortune I made the mistake of deleting something (important I guess) in the Audio Midi Setup (Audio Devices window). I was trying to figure out how to split audio tracks between my headphones and speakers so I could listen to music in one ear while skyping (sounds stupid I know, but I stay on Skype with a long distance coworker most of the day). I guess some 17 hours ago when the failure happened I found on Google that there were sound settings in the Audio Midi Setup and had the great idea to go clicking around in there. Somehow deleted the black option thing (only got a quick look) when my computer lagged and then no more sound... I've been trying to fix it with stuff I found on google but I think I made it worse because now my macbook hangs on a black screen during the shutdown process when I choose to restart from the Apple Menu up there in the top left of my screen. I'm out of Ideas, I've tried clearing P & V rams or whatever several times and gone through almost every post on these forums and google that I can find that have any words relevant to what is the problem. After 15 hours of trying on my own I thought I'd ask for help.
    Any additional info I can provide let me know please.
    Thank you.

    I started having connectivity issues to my 10.6.8 server from my 10.7 client immediately after updating the client to 10.7.3. FWIW. Takes forever to connect, when it does. After just milliconds before.

  • Some devices in MBP are not working in win7 with bootcamp drivers

    Hi.
    I've just got my new mac book pro 15", with SSD 255 disk and hi-ress antiglare screen. I've used bootcamp to partition the disk and I've installed windows 7 64bit pro Greek.
    The problem is that, after installing the bootcamp drivers, some hardware, do not work or recognized. eg, the trackpad, the keyboard, the wireless adapter, etc.
    I've tried to install again and again from the disk, and make any internet updates, but, nothing happens. When I'm installing by single file in boot camp dvd, says, that the driver is not support the OS's language (greek).
    Is there any suggestion for my problem? (In mac OS X there are no problems)

    Hi!
    Unpack the installer files. (I've used winrar for this.)
    Find the DPInst.xml file, and open with Notepad.
    Change the Australian language code to Greek (0x0408) here:
    <!-- ***************************************** -->
    <!-- English -->
    <!-- ***************************************** -->
    <!-- Australia -->
    <language code="0x0C09">
    <eula type="txt" path="EnglishLicense.txt"/>
    </language>
    Save the file, and run DPInst.exe
    Have fun!

  • Office365 shared calendars are not recognized in win7

    Dear all,
    this is my experience.... I have to share the calendars with write permissions for some my colleagues, all of them have windows 7 installed and recently Office365.
    I have shared their calendar giving write permission to the reception account. When I see their shared calendars from the receptionist's outlook client, no permissions are visible but they are correctly set in the respective Web App of the same account.
    If I install the same account in outlook with Windows 8 everything works fine.
    who can help me to solve the problem with Windows 7?
    thanks so much

    Hi,
    Does the issue happen to all your Windows 7 users who is shared calendar? Are Outlook clients the same version in all problematic Windows machines? Please double check the calendar permission is set to Editor in the shared calendar.
    Confirm if the shared calendar can be viewed in OWA. If the issue doesn’t happen in OWA and Outlook in Windows 8 but only in Windows 7, please change another new clean Windows 7 client with Outlook 365 to check whether the issue persists.
    If the issue doesn’t happen in new Windows 7 machine, please disable any third-party mail program in old machines and create new Windows profile to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Pavilion a6303w speakers are not working

    After having to completely remove all files from my computer, due to mechanic systems program. I reinstalled my computer to it's factory settings. I am unable to download my backup disks as well as my speakers are not working. I have checked the Audio and everything is up? Can anyone help me with how to get my audio back?

    When you say "I checked the Audio and everything is up", does that mean that you checked all of the settings in the Control Panel/Sound module?  You should assure that you sound device is set as the default.  Also, check all of the settings one by one to assure that they are checked properly.  Then, update the driver.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • My external speakers are not working, any suggestions?

    My external speakers are not working, any suggestions?

    try different audio or USB cables.
    try the speakers with a different computer.
    go to the speaker manufacturer's website and see if there's some troubleshooting info or a new driver that you need.
    check System Preferences > Sound > Output
    see if the speakers show up in the sound output device list
    make sure the mute box is unchecked.
    Check Applications > Utilities > Audio Midi Setup
    see if your speakers are selected in the column on the left
    make sure the mute box is unchecked

  • My front speakers are not working.

    I have a laptop HP Pavilion dv7-4180ea, Core i7 1.60 GHz, ATI Radeon HD 5650 1 GB, Windows 7 Ultimate x64 with 4 GB of RAM.
    The problem came up after I reinstalled the windows about one week ago. After I downloaded the driver from HP Drivers and Support things didn't seem to work as they did before. The front speakers are not working anymore now, only the subwoofer works and it sounds awful. Is there any other driver I need  to download or something? Thanks in advance.

    Hi here. Use a Mini Display Port to HDMI cable and connect the HDMI into HDMI input on the receiver and the Mini Display to the Mini Display Port on your Mac.
    - Go to System Preferences on your Mac. Click on the "Sound" icon. Then in the "Output" tab, select "(your speakers) - HDMI
    - Then go into Applications via finder > Utilities > Audio MIDI Setup. On the left side of the window select HDMI. On the right side it then should say "Source: (your speakers)"
    - Click the "Configure Speakers..." button in the bottom right of the window. Click the "Multichannel" tab. Then select "5.1 Surround" from the pull down menu. Click on each speaker to provide a test tone to make sure each is connect properly. Then click on "Apply" if there is no 5.1 option e.g it's greyed out use options 48000.0 HZ and 8ch-16bit Integer. You can then select Configure Speakers, Multichannel and 5.1 Surround from the drop down. When testing the speakers you may have to use the drop downs under each speaker to change the numbers for which speaker is where. Good luck :-) hope it works

  • Front speakers are not working.

    I have a laptop HP Pavilion dv7-4180ea, Core i7 1.60 GHz, ATI Radeon HD 5650 1 GB, Windows 7 Ultimate x64 with 4 GB of RAM.
    The problem came up after I reinstalled the windows about one week ago. After I downloaded the driver from HP Drivers and Support things didn't seem to work as they did before. The front speakers are not working anymore now, only the subwoofer works and it sounds awful. Is there any other driver I need  to download or something? Thanks in advance.

    @Miguda_4 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

    Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen  and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine.  My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's.  On the non-working Ipods, the  Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
    any help is appreciated. Chris4sail

    Hello there, chris4sail.
    The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Inspire 5.1 5700 Digital system not working correctly

    I have a Inspire 5.1 5700 Digital speaker system that has some issue's.
    The front speakers are all that is working with center channel low volume , the Sub and Rear speakers are not working according to set-up in software , But Sub is working in games and with Music.
    I had been using an MSI P67/ G43 MB onboard sound. Today I gave up and purchased a new sound card, an Audigy Rx. Installed the drivers, did the update for drivers. I was working w/ speaker set up and mic setup and I still have the same problem.
    I am thinking there has been a change in the drivers or windows 7, that the controller does not recognize. I have checked all speakers and the are working.
    I also am using the Optical output to the controller.

    Originally Posted by RonReagan
    ok, great, but how do I select the source, it only shows speakers w / out an option for optical or Dolby or DTS . also, selecting the Dolby or DTS on the controller doesn't seem to change other than tones that I have noticed.
    Ok , I changed it to SPDIF and it only shows 2 channel @ Hz. in the test that pops up, only 2 front speakers are activated. In Arma 3 , it seems to have 5.1 sound again now.
    I used to be able to set up and test the speakers and set the front / rear balance and fade thru the software. I am un able to do that an again, the source is not Optical but SPDIF.
    So, what am I doing wrong here ??
    and thank you for the quick response and help O))
    Hi RonReagan,
    SPDIF (Sony Philips Digital Interconnect Format) basically has 2 types of connection: Optical and Coaxial. In this case, you are using an Optical connection. Hence, it is known as SPDIF Optical.
    It is correct that you received 2 audio channels during speaker test via an optical connection. An alternative way is to initiate the test through the Windows audio endpoint for SPDIF Out (optical Out).
    At the Sound of the Windows Control Panel, configure SPDIF Out as the default device. Click on the Properties. At the Supported Formats tab, check the box for DTS Audio or Dolby Digital. Click on the Test button to initiate the speaker test. You should able to test for the rear speakers.
    Cheers,
    JL-CL

  • Internal speakers are not working,  they're not showing up at all. Does anyone know how to fix this?

    My computer's speakers are not putting out sound. They worked fine yesterday, and I just now started up my computer and began using it today. The internal speakers don't show up on my list of output devices in settings, and I can't adjust the volume. Any help is really appreciated!!!

    They are all in the same folder and it says all images are there, but it is only showing 1 card's images at a time. Does anyone know how to fix this?
    This is kind of confusing, on the one hand you say "it says all images are there" and then you directly contradict this by saying "it is only showing 1 card's images at a time".
    Could you explain in a lot more detail what you see (and don't say "it", say exactly what part of Lightroom or what part of your operating system you are looking at), or show us a screen capture?

  • Adobe products are not recognized in my Internet Explorer 10 on my Win 7 64B professional

    Adobe products are not recognized with my Internet Explorer. I cannot open PDF documents on websites and I cannot play MSN games since Flash Player is not found. I have tried manage add-ons and enable status without success. Can anyone supply detailed information on how to fix this problem?
    C-adobe

    Are you running IE10 in 64-bit mode?  The Adobe Reader plugin is 32-bit, and can only run on a 32-bit browser.
    Regarding Flash Player, do you have ActiveX Filtering enabled?  Disable it.

  • My ipod shuffle and nano are not recognized by itunes 12

    My ipod shuffle (4th generation) and my ipod nano (2013) are not recognized in itunes 12. I have windows vista and have tried all of the troubleshooting suggestions to no success. How can i fix this?

    Hi DMG1946,
    I'm sorry to hear you are having issues with your iPod shuffle after a recent update. If your iPod shuffle isn't being recognized in iTunes, but is showing up on your Mac, you may find the troubleshooting steps outlined in the following article helpful:
    iPod shuffle troubleshooting and service FAQ - Apple Support
    If necessary, you may also need to use one or both of the following procedures to reset your iPod shuffle:
    Resetting iPod shuffle - Apple Support
    About iPod Reset Utility - Apple Support
    Sincerely,
    - Brenden

  • My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

    My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

    Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
    tt2

  • TS1363 "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    Hi cueball819,
    Thanks for using Apple Support Communities.  This article has steps to try if your iPods aren't recognized by iTunes or Windows:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

Maybe you are looking for