Inspire 5.1 Digital 5700 not working full on X-Fi please H

Help me
I have :
X-Fi Extrem Musik and Inspire 5. digital 5700
Problem : by switching to digital mode i just hear 2.0
but if i watch DvD i have full DD5. and DTS sound
And if I go back to Normal Analog Mode then a can just use 4.0 because the sound system
have just 2 Kabels

The X-Fi line is not compatible anymore with those speakers... Search around, this question was asked and answered before.Message Edited by SoNic2367 on 06-20-2006 06:05 PM

Similar Messages

I have an inspire 5.1 digital 5700 that wont start up

i have an inspire 5.1 digital 5700 that wont start up
all the leds light up and thats all that happends
is there somebody who can tell me what's wrong?

Are you using the original Power Adapter? If you don't use a 4 amp +5 VDC Power Adapter to power the amplifier, this is exactly the response you will get. If that isn't it, then you have a problem with the Amplifier, would be my guess.
Good Luck!

Digital Signature not working in 12.1

Hi All,
Digital Signature not working in 12.1

Hi Subhanim,
Currently I am having MII 12.0 for 12.1 I have not tested
I have tested on 12.0 and it is working fine for me following are steps which i configured.
iCommand Applet setting:
Audit, Command Audit Role 1 and Command Audit Role 1 Login Required
HTML:
I have added iCommand applet with display template as iCommand which I created and one query template (write tag query)
JS:
in JS i am executing iCommand and checking success or failure of same.
you can checkout the role and sequerity tab of iCommand.
Please go through below thread may be usefull:
Digital signature issue in SAP-MII 12.1
Regards,
Manoj Bilthare
Edited by: Manoj Bilthare on Jun 13, 2011 3:53 PM

My photo booth in mac in not working for many days so please give me any suggestion to solve that problem......

My photo booth in mac in not working for many days so please give me any suggestion to solve that problem......
And my Airplort utility does't catch any other wireless devices please provide help....

fubar

Huawei e3276 does not work on OSX 10.10 please help

After I installed Yosemite Huawei e3276 does not work on OSX 10.10, please advise any work around for this issue - Thank you

Found a very easy solution online. Just download the software here and install. works immediately.
http://translate.google.com/translate?hl=en&sl=sv&u=http://www.tre.se/privat/kun dservice/teknisk-support/Mobilt-bredband/Uppgradering-modemrouter/Yosemite/&prev =search

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

HP laserJet P1006 not working on Windows 10. Please help

HP laserJet P1006 not working on Windows 10. Please help

Hi,
Try installing the windows 8.1 drivers from HP's support site, those are more likely to work.
For any issues clarify your OS version, is it 32 or 64 bit?

Inspire 5.1 5700 Digital system not working correctly

I have a Inspire 5.1 5700 Digital speaker system that has some issue's.
The front speakers are all that is working with center channel low volume , the Sub and Rear speakers are not working according to set-up in software , But Sub is working in games and with Music.
I had been using an MSI P67/ G43 MB onboard sound. Today I gave up and purchased a new sound card, an Audigy Rx. Installed the drivers, did the update for drivers. I was working w/ speaker set up and mic setup and I still have the same problem.
I am thinking there has been a change in the drivers or windows 7, that the controller does not recognize. I have checked all speakers and the are working.
I also am using the Optical output to the controller.

Originally Posted by RonReagan
ok, great, but how do I select the source, it only shows speakers w / out an option for optical or Dolby or DTS . also, selecting the Dolby or DTS on the controller doesn't seem to change other than tones that I have noticed.
Ok , I changed it to SPDIF and it only shows 2 channel @ Hz. in the test that pops up, only 2 front speakers are activated. In Arma 3 , it seems to have 5.1 sound again now.
I used to be able to set up and test the speakers and set the front / rear balance and fade thru the software. I am un able to do that an again, the source is not Optical but SPDIF.
So, what am I doing wrong here ??
and thank you for the quick response and help O))
Hi RonReagan,
SPDIF (Sony Philips Digital Interconnect Format) basically has 2 types of connection: Optical and Coaxial. In this case, you are using an Optical connection. Hence, it is known as SPDIF Optical.
It is correct that you received 2 audio channels during speaker test via an optical connection. An alternative way is to initiate the test through the Windows audio endpoint for SPDIF Out (optical Out).
At the Sound of the Windows Control Panel, configure SPDIF Out as the default device. Click on the Properties. At the Supported Formats tab, check the box for DTS Audio or Dolby Digital. Click on the Test button to initiate the speaker test. You should able to test for the rear speakers.
Cheers,
JL-CL

Digital Audio not working on Satellite A505 S6012

My digital audio stopped working suddenly. I use HDMI to send the video out of my laptop to my projector. I had been successfully using, for over a year, a digital audio cable in the headphone (SP/DIF) jack to output the sound to my home receiver. The default audio set in the control panel is Realtek Digital Audio.
If I set the output to speakers and plug headphones in the jack, I get sound. If I set the output to Realtek Digital Audio and plug the digital audio cable in, I get no sound. I've tried new cables, changing the input to a different conection on my receiver, reinstalling the Realtek driver, and, as a last resort, completely recovering my laptop to the factory setting. Digital Audio still does not work.
Any suggestions? This is the main way we watch movies in my home.

hi, have you try out srs audio program it nice!
can u help me if u have make for yourself a recovery dvd of S505 S6012 because to mine i didnt do it and it gives me a lot of problems.
if you have please i would like to have it.
thanks....

Screen Mirroring does not work, full of bugs.

Hi,
I've had a Sony Z1 for well over six months now and have got a Sony Bravia TV that supports mircast screen mirroring. When I purchased the Z1 it was on android 4.2 and the screen mirroring worked a treat, it was lag free, always responsive etc.
But when I upgraded to 4.3, the mirroring was buggy as **bleep**, the device always disconnected, when it did connect after several attempts it would lag, black out, then disconnect again. I've tried fiddling with wifi settings as well as wifi direct etc. but no joy and I left it as that.
When I knew 4.4 kitkat was coming to the z1 I waited as I would assume the issue would be fixed, but I upgraded to 4.4 (build: 14.3.A.0.757) today and is still full of these disconnecting and unresponsive bugs. I'm not sure what the problem is, I mirrored a samsung s4 mini and works absolutely fine (4.2) and I can mirror my sony xperia tablet z (4.3) with no issues either. I know a relative who also owns the z1 and has exactly the same issue, what also seems to happen now and then, is that half way through a mirrored session, the wifi would disable and will switch to the mobile network, then after some time, back to wifi again; yet this never happened on 4.2?
Is there a fix or a way to solve these issues? It's rather annoying having such a great feature that doesn't want to work on a flagship.
Thanks.

I had some issues with Miracast on my Z1 but with 4.2 and 4.3 firmware. It was loosing connection or kept saying that I don't have HDCP. I was connecting using Netgear Push2TV.
On 4.4 (.757) it works quite stable. On Z1C with 4.3 I wasn't able to miracast at all.
The same goes with screen mirroring to Z2 tablet. Works fine from Z1 to Z2 (both KitKat, altough one touch pairing is a disaster and not working at all), but you can forget about it using Z1C and Android 4.3.
Best regards,
Sergio PL
Xperia Z1 / Nexus 7 (2012)

Digital out not working (unibody)

I have been using my digital out for some time and now i noticed its not working. When i go to the system panel it says headphones when i plug in the digital audio out connector rather then saying digital audio out. NOthing has changed otherwise. Same connector cable plugging into the same audio system.
Thanks in advance

Have you tried cleaning out the jack with some compressed air? Sometimes the Mac will mistakenly think something is plugged in to the optical/analog audio jack.

ITunes digital Booklet not working

When I purchased AMOK by Atoms for Peace, I noticed that the digital booklet was not working.
The file “Digital Booklet - AMOK.pdf” could not be opened.
It may be damaged or use a file format that Preview doesn't recognize.
Now of course I have Adobe reader installed, but I didn't think much of it at the time. Then I purchased a new macbook pro retiring my old black Macbook. I have Adobe reader installed, but have the same problem when I downloaded the album off of iCloud.
Could this have been a mistake on the upload of the album to iTunes by the digital manager of Atoms for Peace? Or I am missing something?
Not really a big deal, but I thought I should reach out and see if anyone has/had this problem.

Digital booklets are nothing but PDF files, that should (theoretically) open in any normal PDF viewer. (Interactive booklets, on the other hand, are Flash/Quicktimes files that have all kinds of fancy features but can be more buggy).
You might want to try to open the PDF file in a different viewer, to make sure that it's not a problem with Acrobat. If it won't open in any viewer, your best best is to contact iTunes Support about the bad file.

Help! please! digital-in not working in vista with xfi ga

I just bought a digital I/O module for my Xfi Gamer card. I was using the youppax driver set. I am not getting any sound from the Digital in on the card. Also the digital I/O selection is greyed out in my control panel. Does anyone know how to get the digital in to work? Next I think I will try to remove all the drivers and software for my xfi and reinstall the Creative Labs latest drivers, do you think that will help?I am sure other people have had this issue also. My primary purpose for my sound card is so I can do multitrack recording on my PC using the digital-in as the source. I have been doing this on my XP machine for years now. This is killing me, Help!!! Please!
!!! Thanks,

Robweese wrote:
Could a Creative rep or an experienced user here please provide direction to me on how to proceed from here? Will the Digital I/O module work with my xtreme gamer card? If the Digital I/O module will not work, what do I need to purchase to get the digital in working on the xtreme gamer card?
The Digital IO module connects to X-fi cards via the Flexijack, which on all of them except the XtremeGamer is an electrical connection. Unfortunately the XtremeGamer's digital flexijack functions are optical-out (only) instead, so the I/O Module won't work with it. The Product page for the Digital IO Module shows what cards it works with. The XtremeGamer doesn't work with the external IO console either due to the lack of the needed connector. Unfortunately this means there is no way to get a digital signal into that particular X-fi card. Sorry
Dale

Audigy 2 Value digital out not work

I'm trying to use the digital out on my audigy 2 value card using my onkyo system (6. with a receiver). at first i tried using a stereo /8" male to /8" male cord with one end using a /8" to rca adapter and hooking that up to my coax input on my receiver. using that, i was only able to get 2.0 sound (no sub signal). I have my receiver set to 'direct' input so it receives whatever PCM or DD signal is sent. I tried both mp3's and dvds and nothing gives more than 2.0. I called tech support and was told i needed to use a mono cable. i went to radio shack and got a /8" mono (male) to phono (female) adapter and hooked it up to one end of a phono (male) to phono (male) cord and plugged them into the respecti've places on my soundcard and receiver (coax). Still only 2.0. I did the speaker test in speaker settings and it confirms only 2.0 because all i hear is "front left" and "front right". what's wrong? I'm about to go nuts on this.

alright, i read the knowledge base articles and saw that the tests won't output more than left and right, but still, it's not working for my dvd's. i have my receiver set to "direct". is that right? i'm using windows media player for the dvd playback, should i try something else? do i have to install an AC3 codec? do i have to enable something in media player? anything please

Dolby Home Theater/Dolby Digital Plus not working

Update: Issue gone today. Dolby working properly. Still using same drivers. (Win 10 64-bit). How? I don't even know. edit: I think turning off "Hey Cortana" fixed it for me.

MattSharp ha escrito:
Dolby Digital Plus has miraculously started working, though it looks very different to the last time I used it (it used to be a lot smaller and said Home Theater rather than Digital Plus) but its better than nothing.Hi, DDP is not DHT, dolby provides a separate software for each and thats why it does not look the same.I read on the net that DDP was not as good as DHT, but I don't know... Anyway I´m on a V5-552G and I have had these problems before with a clean install of 8.1 and again this week with the upgrade to W10. Let me tell you what worked for me but before we begin just let me say that Dolby Home Theater has always given me problems and will sometimes just turn off and other times the icon in the taskbar would go away or just not respond. I´m hoping it's more consistant on W10 though I dont see why it would be. The only driver that ever worked properly with Dolby was the driver for windows 8 (not 8.1). the new driver on the Acer site for winodws 10 did not work either. So the one I´m using and I´m listening music to with DHT while writing this is: Audio_Realtek_6.0.1.6878_W8x64_A To get dolby to work: 1. Uninstall the current driver, and any software related to it (the dolby software) 2. restart 3. Install the driver for windows 8 (in my case it never installs dolby automatically, I´ll explain how to do it manually below) 4. Restart twice (yes, I always had to restart twice after the install otherwise manually installing dolby would not work and I got an error when trying to run the install) 5. In the driver folders you downloaded and unzipped go to the folder "PCEE4" and run "DolbyHomeTheater.msi" 6.If you dont get the "Install PCEE" error, restart and you should be able to enjoy dolby (when its not acting up). If you get the error then you may have not followed the instructions properly. Go back to step 1 Good luck guys

Inspire 5.1 Digital 5700 not working full on X-Fi please H

Similar Messages

Maybe you are looking for