Inspire 5200 5.1 sound from both R & L rear speakers coming from left rear speaker only
I have done a complete sound system check, every thing check out good. From the rear speakers I am only getting sound from left rear. When i do a speaker check, when right rear speaker lites, sound comes from left rear. when left rear speaker lites sound also comes from left rear speaker.
creek,
You may have to check with your sound card manufacturer for special setting to upmix the Stereo to the rest of the speaker.
If you are using Creative 5.1 sound card, you can refer to the link for the CMSS upmix feature.
http://forums.americas.creative.com/...essage.id=2563
Jason
Similar Messages
-
I have 2 computers, one in the US and one in Canada. My US computer has about 3000 songs from both iTunes and CDs which are synced on my phone. When I sync my iPhone in Canada only the iTunes music is synced to my Canadian computer. How do I get the balance of music synced from the phone?
Follow the steps given here
https://discussions.apple.com/docs/DOC-3141 -
Songs from the same album appearing as coming from different albums
I am having trouble grouping multiple songs into one album. In my iTunes, there are songs from the same album that are appearing as from separate albums. For some reason, it is only happening in rare cases. It has randomly split The Roots' album How I Got Over into 3 separate albums, and it has split every Outkast song into individual albums.
And yes, I have already tried the basic steps of selecting all the songs I want to group, and editing their info together. I have done this, and ticked every box in the info fields so they will be identical. Yet they are still appearing as songs coming from separate albums.
Does anyone know what I can do? (I am using the current version of iTunes -- v9.2.0.61)Actually there is something else, more for the purists though.
Some albums will have "featured" artists and they will be stuck into another part of the tag, but by doing that iTunes thinks it's another artist and treats it as a different album. A good fix that I use is to remove the featured artist and ammend it to the track name. So: "When You're Gone (feat. Mel C)" Is the actual track name instead of "When you're Gone" and the artist being "Mel C" and the album artist being "Bryan Adams". Make sense?
By turning it into a compilation it will change where it appears on your iPod or whatever, basically it will be grouped with all other compilations, not where the artist should be. -
I have two mail accounts on my Mac. I want one account to bcc me when I send emails from that account. I checked "automatically bcc myself" under mail>preferences>composing, but both accounts bcc me when sending mail. Can I set this to only bcc myself from one specific email account? Thanks.
It does not make sense that your ssh does not have a dash capital Y (-Y) option. It is in "man ssh", and my 10.6.6 has the -Y option, and I've had a -Y option since at least Tiger (10.4) days.
My ssh is in /usr/bin/ssh
I'm not very good at X11 issues, so I'm just throwing ideas out there.
Does your broken account have a $HOME/.ssh/config file, and if so, what is in it?
Does the broken account have any $HOME/.x* or $HOME/.X* files that X11 might be reading to configure your X11 behavior differently from the new test account?
$HOME/.Xauthority
$HOME/.Xdefaults-<hostname>
$HOME/.Xresources
$HOME/.ICEauthority
$HOME/.keymap.km
The above are a few names I found looking through "man X"
While I'm thinking about it, I assume that when going to the server, you are using the exact same user account on the server, so that you have a constant at least at that end.
Have you tried trashing your
$HOME/Library/Preferences/org.x.X11.plist
file, to see if that is affecting the broken account?
Again, I am just throwing out ideas to see if anything sticks. -
when i delete a song from my library, i am not given the option to delete it also from my pc file as the help section shows.
after clicking delete and remove only the library reference is removed. song in file remains.Take a look at my FindTracks script. Download it and test it out on a few tracks first. Use the No option first time around to manually confirm each path that it wants to fix so you can see how it works. When you're happy it does what you want select a larger group of tracks to process automatically.
tt2 -
Songs that I have had previously downloaded from various other sources, but NOW ALL of a sudden they DO NOT PLAY on my IPHONE and DISPLAY a RED STOP BUTTON in a red round circle next to the title. Everytime I click on it it DOESNT play. What happen???? How can i get them to play., Why should i have to pay for the songs, and why are they in the ITUNES store and not in my regular playlist.
Amazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
http://support.apple.com/kb/HT1535
Please let me know how things are going.
Cheers! -
I Have been getting blank texts from a number, but the person who owns the niumber is not sending them, they appear then disappear, they are not coming over the network, they come even though number has been black listed, also emails have been moved, I believe by someone who is cyberstalking me but don't know how to prove it, what can I do ?
Hi,
When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
I would contact Apple Support and check with them. (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
I did find this iOS: Troubleshooting Messages - Apple Support
It starts off about sorting SMS that is not working.
This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
7:55 pm Tuesday; January 6, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Please help!
You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4) -
Just after my warranty expired, my Toshiba 55TL515U started to play sounds through both the TV's speakers as well as outputting audio to my external Polk Audio soundbar, which is connected to the TV via the Digital Audio Output line. The TV never did this after I connected the external soundbar until a few days ago.
I don't want any sound to come out of the TV speakers, I only want sound to come out of the soundbar. There's a horrible echo effect that occurs when both sound systems are active.
I don't see a setting on any of the TV menus to control this. I would assume that if the TV senses an external audio device, it would no longer output any sound to the TV's speakers.
Is there a setting on the TV I'm missing, or is this something broken within my TV?
I called Polk Audio tech support, and they claim it's not a problem with the soundbar, but with the TV.
If anyone can comment on this, I'd be very thankful.I have the same problem. When I mute the TV, I get sound only from Soundbar which is fine. But, everytime I turn on my tv, I had to mute my tv. And if I accidently press the volume button on TV, then both TV and Soundbar plays sound and that sucks.
-
IPad making notification sound even though I disabled them all, where is it coming from?
Okay so since updating to iOS7, there is something triggering random notifications on my iPad. It's making a two note notification sound. There's no banner or badge or anything that is associated with it. I went into notification center and have literally turned off every single sound notification (but leaving the sound switch on). The iPad still makes the notification sound.
I was thinking it was coming from the OS itself, but I went and browsed the sounds under Settings->Sounds and couldn't find the one that I'm hearing (although I suppose that doesn't rule anything out).
Any ideas on where it could be coming from?I have an iPhone 5 and an iPad Mini, but I only had the problem on the iPad Mini. My problem was a little different than yours, but this fix may work for you.
This is what I posted in another thread:
I HAVE FIGURED OUT THE FIX FOR THIS! ... (Well it worked for me on my iPad Mini.)
I saw a post from an apple rep telling a iOS 6 user to turn the side switch on to un-mute the sounds. A no-brainier yes, but it made me wonder if the side switch may have been temporarily "confused" after updating to iOS 7 because it added the new settings screen that swipes up from the bottom of the screen. I was using my side-switch to lock the screen rotation and it was in the "off" (down) position (red visible) and none of my notifications were sounding. So I flipped it up and down a couple times which didn't solve the problem. So logically, I proceeded to what inevitably solved the problem...
Go to Settings > General / "Use Side Switch To" and select the opposite of what you are currently using. I had mine on Lock Rotation, so I selected Mute. Then flip your switch up and down slowly a couple of times to see that the confirmation on the screen is correct. You may have to go back to settings again and select the other choice if you originally had Mute selected, I don't know because I originally had Lock Rotation in use.
Hopefully, this will fix your notification sounds (and the lock sound when you press the power button). After using this fix, you can set the use of the side switch to your preference and still have all of your notification sounds! -
T440p: Audio coming from speakers despite headphone being plugged into jack
This doesn't always happen, but I've noticed a few times on my T440p that when I have headphones plugged in, sounds comes out of the speakers. The headphones are functional and fully plugged in, yet no sound comes out of them, and the sound comes out of the speakers. I've fixed this multiple times by unplugging the headphones and plugging them back in.
Has anyone else had this problem? If so, have you been able to fix it? The reason it is a problem for me is that it distracts those working around me.
Thanks.
(my problem differs from this one, where sounds comes from both the headphones and speakers)
Solved!
Go to Solution.Look for a multistream option in the Realtek audio control panel. Make sure it's set to unify headphones and speakers.
Alternatively, if you want audio to only come out of the headphones and not switch dynamically, go to the Sound control panel in Windows, and set headphones as default.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
My Compaq Presario C700 shuts down at randomly and there is no noise coming from the machine at all
My laptop will only turn on for about ten minutes before dying, it doesn't even go through the usual shut down process, it just turns off. Also, there is no sound of a fan or any humming coming from the computer. Before this problem of the random shutting down started, there was always a humming sound coming out. This happened to the computer about a year ago, and I gave it into PC World (Ireland) and they wiped the system and it worked again. So, the minute I saw the same thing happening I backed everything up and wiped it myself, I set up my user in vista again, but the computer was the same and was turning off randomly.
Does anyone know how this can be fixed?? Thanks for your help.
PS: It's A HP Compaq Presario C700 Series Notebook running Windows Vista Home Premium.There may be a real hardware issue (like spanning above mentioned.) When I lose sound on my phone, here are the things I try, in no particular order:
If you use Apple TV, open a movie file (you tube, music video, anything you can play over Apple TV.) Switch to Apple TV playout and then switch back to your phone. If you left the phone going out to Apple TV, it may have kept the sound routing there -- switching back and forth again should reset it back to playing to your iPhone speakers.
If you use headphones, stick the headphones in and out again. Same kind of idea, the headphone detection may have been incorrect, and the toggle in & out will help it reset back to your speakers.
If you play games, go into a game with sound and adjust the volume there. There are actually three different volume settings (as far as I have experimented with) ringer, "normal" volume, and game volume... it's a little buggy figuring out which one your phone should be using -
"Inspire 5200 5.1 HELP!!! no sound!
"Inspire 5200 5.1 HELP!!! no sound! Hey guys, i just recently got an inspire 5200 5.1 system and hooked it up. All connections are great and are connected properly to the sound card (all colors to all colors). The problem i have is that i hear absolutely no sound from the speakers. I have checekd all the settings and am unable to locate the issue. I have a soundblaster 5.1 card (2 cards so i know my card is not a problem). I also tried connecting some headphones in the volume module and i can infact hear sound from the headphones. Is it possible this is a hardware issue with ALL the speakers?
The only thing i can think of is the power source. The original power adapter was for the asian/euro market and i am in America. I have used a tiny converter switch that changes the euro interface (2 long circular pins) to the american outlet interface (two long rectangle pins). Could it be that the speakers are not getting sufficient power somehow by using this adapter? Any suggestions would be much appreciated!creek,
You may have to check with your sound card manufacturer for special setting to upmix the Stereo to the rest of the speaker.
If you are using Creative 5.1 sound card, you can refer to the link for the CMSS upmix feature.
http://forums.americas.creative.com/...essage.id=2563
Jason -
Sound coming from both speakers and headphones at the same time in probook 4440s
I have a Probook 4440s with windows 8 pro(64 bit) with IDT high definition codec installed. Yesterday when i was playing some songs i noticed that the sound was coming from both headphones and speakers even when my headphones are plugeed in and my lappy was having no such problems a few hours earliers while i was watching a movie. Please help..
It may be because you have both the internal speakers and headphones enabled at the sametime on your laptop. This might just happen automatically when you plug your headphones in. You need to manage your audio devices on your laptop.
Go to Control Panel> Hardware and Sounds> Manage Audio Devices> Playback Tab (which should already be selected)
In the playback tab there should be a list of all the audio devices you are using on your computer. Right click on the one you don't want to use and click disable. This should stop the sound coming from that audio device.
Remember: You will need to enable that audio device if you want to listen to sound through it again. Your internal speakers won't work once you enable them again. This might also be the case with your headphones. You may also have to do this every time your plug in a device or once you restart your computer.
Another note: Sometimes disabled devices will not show up on the audio device list so once you disable a device it will dissappear. This is an easy fix too. Just right click on an audio device and make sure show disabled devices and show disconnected devices is checked.
I hope this helps.
(I was using a computer with Windows XP to explain the instructions but it should be similar with your Windows Operating System. You may however have to play around a little on your computer because it may be slightly different) -
My iPod Classic was working fine all day. Came home and uploaded 2 files via iTunes, now there is no sound coming from my iPod. I've tried both headphones and a docking station......nothing. The songs don't even engage, they skip to the next one. I've tried rebooting the iPod and still nothing. Any ideas?
KimHi, and welcome to Apple Discussions.
Have you tried resetting the PMU?
I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.
Maybe you are looking for
-
Working with both OS 9.2.1 and OSX 10.4 on Prismo
Hello, My profile is not entirely correct as it is back to OS9 right now ( I think), I'll sum up what I did (some of this was probably a mistake) Initially a Prismo Firewire with OS9: 1) Copied OS9 applications to a flash drive. 2) Replaced 12 gbhd w
-
Safari 2.0.3 & Acid Search - It still works - FYI
Just thought I would let fellow Acid Search Users know that Acid Search does still work with the latest Safari... You need to get rid of the Acid Search Package when installing the latest update (or it crashes Safari), but once the update is up and r
-
Actionscript time out exception
Hi Everybody I am working in a project where huge amount of data to be shown on the screen. I got the data from database and I have to use loop for a lot of times in action script for renderering the data. But the problem is that in this period of ti
-
Why does Mavericks Spotlight not find files named, for example, Ono et al 2009, PNAS, 106(35), 14745-14750 - annotated when I use Ono as the search word. I can find the file using the search feature on my Windows 7 PC. Is there a way to change the
-
I'm really confused. I need to create an album from various images. I have several versions created from the master image. (Color, black & white, etc). I create a smart album to get the overall shots that qualify. Then I need to create an album to be