Inspire 6.1 6600

I need a new amplifier circuit board for my Inspire 6.1 6600. Where can I get it?
Thank you

rudra wrote:
Hi, Recently i have bought creative inspire 6.1 6600 speaker set.... I have ASROCK P4i45GV motherboard......And it has built-in sound card....When i connect the speaker set to my PC i am able to connect 4 speakers and Sub woofer too. I am able to hear the sound from all the 4 speakers and that sound will be same in all 4 speakers..(It will not be different in each speaker) Remaining two speakers i am not using ....Right now i am not planning to buy any sound card .. Is there any harm to the speakers if i keep using the same setup?Thanks in AdvanceRudra
No harm done so don't worry.

Similar Messages

Inspire 6.1 6600 Repair??ANYBODY??

After about 3 years of reliable usage, my Inspire 6.1 sub took a dump. It just made a "BOOMP" sound and power went off. I checked internal fuse and it's fine,... anybody know where I can get this repaired?
Creative just wants to sell me a NEW system and charge me $2.99 for a "Tech Session" for trouble shooting........
ARE YOUR SPEAKERS PLUGGED IN AND TURNED ON.........yep
IS YOUR REMOTE SWITCH TURNED ON.................................yep
ARE YOUR CABLES ATTACHED PROPERLY...............................yep
ARE YOU SURE THE SOUND SOURCE IS SENDING SIGNAL..... yep
.....OK,.... IT's BROKE..................................DUHHHHHHHHH HHHhhhhhhh!!! $2..99 PLEASE.
You know, the sad thing is;
I use many other Creative products on my job (Music Production). I use Creative Jukeboxes, Creative Soundcards, as well as creative Playcenter2 & Mediasource.....
I work with this equipment every day,... my production schedule demands reliable gear or a least quick customer service. We can't afford the "down time".
I have REALLY been considering switching to iPod's and with the lack of customer service I am getting from Creative,.... I might just go that direction. I have been told I "won't look back".
Since I can't even get schematics (thats "Internal Map" ??,...for SOME Creative tech people),......... to have my Inspire 6.1 6600 system repaired (which from the looks of this forum is a COMMON PROBLEM ),..... I guess maybe I'd be better off spending my $$$ somewhere else.
Thanks guys!!
Once loyal customer,
Ron Zara
[email protected]
Message Edited by ronzara on 07-05-2006 07:10 PM
Message Edited by ronzara on 07-05-2006 07:13 PM
Message Edited by ronzara on 07-08-2006 03:51 PM

Originally Posted by ronzara
After about 3 years of reliable usage, my Inspire 6.1 sub took a dump. It just made a "BOOMP" sound and power went off. I checked internal fuse and it's fine,... anybody know where I can get this repaired?
Creative just wants to sell me a NEW system and charge me $2.99 for a "Tech Session" for trouble shooting........
ARE YOUR SPEAKERS PLUGGED IN AND TURNED ON.........yep
IS YOUR REMOTE SWITCH TURNED ON.................................yep
ARE YOUR CABLES ATTACHED PROPERLY...............................yep
ARE YOU SURE THE SOUND SOURCE IS SENDING SIGNAL..... yep
.....OK,.... IT's BROKE..................................DUHHHHHHHHH HHHhhhhhhh!!! $2..99 PLEASE.
You know, the sad thing is;
I use many other Creative products on my job (Music Production). I use Creative Jukeboxes, Creative Soundcards, as well as creative Playcenter2 & Mediasource.....
I work with this equipment every day,... my production schedule demands reliable gear or a least quick customer service. We can't afford the "down time".
I have REALLY been considering switching to iPod's and with the lack of customer service I am getting from Creative,.... I might just go that direction. I have been told I "won't look back".
Since I can't even get schematics (thats "Internal Map" ??,...for SOME Creative tech people),......... to have my Inspire 6.1 6600 system repaired (which from the looks of this forum is a COMMON PROBLEM ),..... I guess maybe I'd be better off spending my $$$ somewhere else.
Thanks guys!!
Once loyal customer,
Ron Zara
[email protected]
Hi ronzara,
Do not post with a unconstructive rant. We want to maintain some semblance of order and usability. If you want your criticism/feedback to be heard, post it in a well thought out and constructive manner, be it negative or positive.
Please refer to the Forum Rules and Regulations for more information.
Cheers,
JL-CL

Inspire 6.1 6600 Sound

Hi,
Recently i have bought creative inspire 6.1 6600 speaker set....
I have ASROCK P4i45GV motherboard......And it has built-in sound card....When i connect the speaker set to my PC i am able to connect 4 speakers and Sub woofer too. I am able to hear the sound from all the 4 speakers and that sound will be same in all 4 speakers..(It will not be different in each speaker) Remaining two speakers i am not using ....Right now i am not planning to buy any sound card ..
when i keep the bass full and increase the volume, after half stage the sound starts shaking...Meaning i wont be able to hear the complete sound...
According to me there should not be any problem with the sound even i keep both bass and volume high .But the same is not happening with my inspire 6600......
So whats the problem?Do you think any problem with the particular set...........
Moderator plz help me in this regard.
Thanks In Advance
Rudra

6.1 6600 speakers will have every satellites giving out different sounds and reverberation. If you have those all similare, your sound card might not be supporting channel output.
With my experience with creative, the speaker systems are not suposed to be operated at full volume, at full bass enhan*****t. The reasons are:
1) The power supply will be one-third more capable than the speaker rating. So, full amplification of the sound signal is not preferable.
2) Even if the fidility of sound card is excellent with more than 98 dB SNR, the amplifier at the speaker system need not be as good as that at the card (because, it amplifies the signal to much higher a value)
3) As I have seen with most of the speaker systems (including high end theatres), the bass enhan*****t is fully functional with woofer and subwoofers of more than 100 watt RMS. That too will exhibit chattering after an year or two, at high volumes.

Creative inspire 6.1 6600

Hello Creative Staff,
I need help with a very delicate situation.
I have bought the Creative Inspire 6.1 6600 from my dad in
Europe and i guess that problem just starts off then. It runs with 230V ~ 50Hz 39mA and the AC adaptor is 3.5V ~5A 67.5VA
I'm not a technician, but i know enough that i need to get a power tramsformer;
but the problem is what kind of trnsformer do i need in order to make things work
right the first time?
can anyone help me with this one?
P.S I also bought the USB Sound Blaster Live! 24 bit. just to let you guys know.
Message Edited by thm_05 on 03-03-2005 11:32 PM
Message Edited by thm_05 on 03-03-2005 11:38 PM

thm_05,
If you need a transformer to use a power supply from a different country, you'd really need to speak to an electrical store in your area to see if they can supply you with one. We don't make or supply any of these.
Cat

Creative Inspire 6.1 6600 Speakers

I have Creative Inspire 6.1 6600 speakers. The "Wired Volume / Base Control with Power Switch and Headphone Jack" is malfunctioning. In fact, when I turn the volume control on, the green LED on top does not illuminate. And because of this bad control, I do not have sound. Can anyone tell me how and where I can replace this control? Your assistance is appreciated. Thanks very much.
Charles

I'm also having the exact same problem, and so is a friend who has the same speaker/soundcard setup. Any help is appreciated!

Creative Inspire 6.1 6600 Sound Problem

I have a Creative Audigy Audio Processor (WDM) (Audigy 2) and the speakers are Creative Inspire 6.1 6600. The sound goes down when the selector of volumen is between 3 and 4. I need to increase the volume to make it sound again, but it goes down again. What`s going on?

Does this problem only occur in certain programs? Because I have a similar problem with my sound suddenly dropping without warning. But it only happens when I'm playing music in Windows Media Player. If it does have something to do with the media player then I suspect it could be the "WOW effects plugin." I hope this helps, or at least narrows down your problem.

Inspire 6.1 6600 MOD Tissue BOX

So, i took one of satellites from my inspire 6600 just because my klipsch promedia 5.1 ultras eliminated the need to ever use those again, and i Decided that I wanted to take it apart and play around with it. But after carrying it around with me for a while i decided that i wanted to put the actual speaker somewhere without the case. I was with my friend and we couldnt think of anywhere untill we saw the tissue box on the counter and at once we realized that this tissue box was destined to play music. After a few hours of messing around with the speakers, and taking apart other various electronics for parts, wires etc. we finally came up with our final product, a tissue box with 0watts of speaker power coming out of it. Well we had fun with that and thank god that we still have the 5 other satellites from the 6.1 system to mess around with. The pictures for this are on a makeshift website that i threw together just for this http://www.geocities.com/essej777/ti...html?369535209
essej666

6.1 6600 speakers will have every satellites giving out different sounds and reverberation. If you have those all similare, your sound card might not be supporting channel output.
With my experience with creative, the speaker systems are not suposed to be operated at full volume, at full bass enhan*****t. The reasons are:
1) The power supply will be one-third more capable than the speaker rating. So, full amplification of the sound signal is not preferable.
2) Even if the fidility of sound card is excellent with more than 98 dB SNR, the amplifier at the speaker system need not be as good as that at the card (because, it amplifies the signal to much higher a value)
3) As I have seen with most of the speaker systems (including high end theatres), the bass enhan*****t is fully functional with woofer and subwoofers of more than 100 watt RMS. That too will exhibit chattering after an year or two, at high volumes.

Connecting an Inspire 6.1 6600 system directly to a PC WITHOUT a sound card

I have a Dell PC with no sound card. I also have an Inspire 6.1 system. I want to connect the speaker system directly to the PC. I searched high and low on the CL site to no avail.

Hi Tseran6600,
Before you do that, please check if the main board supports 6.1 speakers. It would also be advisable to get in touch with the computer vendor for assistance because they have information about your system.

Problem with Inspire 6.1 6600 subwoofer

Hello,
All of my other speakers work except for the Sub......
It is strange because everything is connected to the sub, the sound of the other speakers is good and the calibration via the Creative software reads good.
Still, the sub just doesn't make any sound.....
I have this speaker system since 2002......
Does anyone have any suggestion as to why my sub doesn't work?
Gal.

6.1 6600 speakers will have every satellites giving out different sounds and reverberation. If you have those all similare, your sound card might not be supporting channel output.
With my experience with creative, the speaker systems are not suposed to be operated at full volume, at full bass enhan*****t. The reasons are:
1) The power supply will be one-third more capable than the speaker rating. So, full amplification of the sound signal is not preferable.
2) Even if the fidility of sound card is excellent with more than 98 dB SNR, the amplifier at the speaker system need not be as good as that at the card (because, it amplifies the signal to much higher a value)
3) As I have seen with most of the speaker systems (including high end theatres), the bass enhan*****t is fully functional with woofer and subwoofers of more than 100 watt RMS. That too will exhibit chattering after an year or two, at high volumes.

Inspire 6.1 6600 volume control

Hallow, I lost my volume control of Creative 6.1 6600 speakers.now i find out the conncetion diagram fo volume control jack to make a volume control manualy please help me thanks Aleem Baig

I'm also having the exact same problem, and so is a friend who has the same speaker/soundcard setup. Any help is appreciated!

Please Help! Creative Inspire 6.1 6600

i've had this speaker system for quite some time, but now my subwoofer doesn't work. i've done the noise/channel test through thx and creative and they both give me the same results. all 6 speakers work, but the subwoofer doesn't. so i attempted in the callibration. all went good until the bass/subwoofer section, the sound went jumpy and squeled so loudly. i've checked all wires, but still no results. still doesn't work.
if this could relate to the sound card, well the current sound card i'm using is SB Audigy 2 ZS.
thx for ur help

fungry
Just a piece of advice.. Never buy creative speakers. I have 2 friends who had their creative speakers damaged in month. And my 6.1 6600 damaged in 6 months time, (I didn't use it for 3 months in the middle). In my case, the speakers start to produce weird sound, and sometimes there's signal going through, sometimes there no signal.
Creative produce good sound cards, but not speakers.. although I do have a lil problem with the soundcard at the moment for the crackle,pop sound during playback of songs when computer is under high load, but i believed it can be fixed with a new driver/software.
I would recommend you Logitect speakers.(logitech has strong bass) some people prefer altec lansing because it has has clear/crisp sound but I think that's only higher treble that's all.
You can have very clear voice on the logitech too just by adjusting the treble level on your audigy2 zs.
I am now using Logitech z5300e and its heaps stronger than 6.1 6600. I would say 6600 is a failure, there isn't much power.. weak sound..you can't enjoy music or movie with that set of speakers
Since you have a good soundcard, I would think that you do enjoy good quality music and movie. To achieve that, I think you would need to change your speakers. Go for z5300 or If you just got that extra money, get Logitech Z5500..
Well, That's just my advice. Good Luck
Sam
Message Edited by samueltai on 06-11-2005 03:01 AM

Creative Inspire 6.1 6600 Controller

Hey there, i wasnt sure where to ask this question, so i do appologise in advance.
Recently, my speakers start encountering problems, and finally the sound completely stopped working - and this was due to the volume controller (I own the Creative Inpsire 6.1 6600).
As i know i wont get warranty, nor do i intend to try and recieve it as i've had these speakers for a fair long time and dont have any receipts etc. I was just wondering if anyone on the forums have the remote spare, or do you have any tips and tricks that might help? Ive opened it and made sure it was cliking and the swtich was hiting the and connecting properly inside.
I have searched online numerous times for second hand controllers, but have had no luck.
Thank you very much.
Todd

I'm also having the exact same problem, and so is a friend who has the same speaker/soundcard setup. Any help is appreciated!

Cretive Inspire 6.1 6600 BIG PROB

Hello, My speakers stopped working all of a sudden, its seems that only the tutors are working , the sound is no more than headphone speakers. Can any one tell me whats the problem, is it the remote or is it the woofer? please advise me .. and who to consult for repair or check in Malaysia... Thanx alot. its not in warranty also..
let me know..thanx

You can contact Support for your region, if you need a replacement or repair:
Asia Customer Support
They should be able to assist you further.
Cat

Inspire 6.1 6600 volume control off

the problem is the speaker power volume control because I have try the headphones and the sound is good...and the power working but the green light of the power/volume is off and the speakers are mute...
Someone can help?
thx,
alex

Try contacting Creative Labs support through the website or over the phone. They'll be able to supply you with the part, provided the speakers are still in production. CLs are usually quite good at that.

Static Creative Inspire 6.1 6600

Recently, within the past month and a half to two months, my speakers have started to make a static noise. At first, it was occasional and it would go away after I turned my speakers off over night. However, recently ever since I have moved the static has increased. My cell phone would cause interference with my speakers, but it would never make static noises when my cell phone wasn't going off. However, it started before I moved and it has only increased. Is there anything I can do to stop this static?

I'm also having the exact same problem, and so is a friend who has the same speaker/soundcard setup. Any help is appreciated!

Inspire 6.1 6600

Similar Messages

Maybe you are looking for