Inspire 6700 Subwoofer failure.

Due to what seems to be a common defect in this subwoofer, my speakers are now not working.
I have approached Creative support by email but they have not replied as yet.
I also went to my local electronics retail / repair shop, but they are unwilling to repair the circuitry.
It is the same fault as the link below:
http://uk.europe.creative.com/suppor...asp?thre=53427
I have a bit of electronics knowledge but would be grateful if someone could post a picture of thier subwoofer circuit board, as i need details of the resistors, transistors and capacitor that have blown.
Heres the link to my picture:
http://www.williamwallace.f2s.com/circuit.htm
Resistors R0, R and R2 have blown on mine.
Transistors Q2, Q3 and Q5 have blown.
And Capacitor C has blown.
Any help would be greatly appreciated.
Message Edited by William_Wallace on 05-10-2005 10:28 AM

Just had a reply from Creative. They are sending out a replacement, and I got an apology for the delay in the replying.
I wasnt expecting that. Normally you would get the old "nothing we can do about it" reply. Just shows you why Creative are so popular, great customer support.
Thanks Creative.

Similar Messages

  • Inspire 6700-Electronic circuit needs to be replaced

    Dear friends, I've bought two PC in Madrid, Spain. Both have Inspire 6700 speakers system. Just before warranty expired they stop working. I searched fot the Technical Service Support phone number and... surprise, it'ss in Ireland! Nobody on the line, I left a message to be called back -as the answering machine suggested-. Nobody phoned back. I tried several times...no answer at all!
    After many tries and headaches I found that this system is not reliable (many users are complaining on this forums).
    I e-mailed Creative support several times saying that I want to buy the electronic circuit -I will replace it myself- but, again, no answer from Creative...
    What do I do now? Shall I drop both systems in the rubbish bin?? I need support!!! How can I trust Ceative anymore when I'm left abandoned in such a situation?
    Where the hell can I get this electronic circuit's
    Thank you.
    the photographs included in this message are the top and bottom sides of the electronic circuit I need to replace. It belongs to Inspire 6700 speakers system (6.1).
    As I can't get this in Spain I would like to receive it by post in Madrid. Could you please tell me how much this will cost?
    Thank you.
    Jose A. Lopez Soto

    Thank you for replying.
    This is a nonsense dialogue (me & Creative)...
    I told you (and so many others in Creative) that nobody answers the spanish support phone (ironically is in Ireland)...my phone number was left in the answering machine a few times and nobody has phone back since then...
    There's no service in Spain (but you do sell lots of products).
    I could see in the forum that many people had troubles with the electronics of Inspire 6700. It seems that the subwoofer is made very badly and Creative don't want to asume responsabilities... I should get new subwoofers!!!! The two I bought are defective.
    I will not trust your company anymore since I'm left abandoned -as well as many other clients...you could see it yourself by reading the messages regarding Inspire 6700 in the forum.
    Thank you for nothing! (after spending a good amount of money).

  • Inspire 6700

    Hi,
    I have an inspire 6700 but my subwoofer is down now. I buy it 2 years ago.
    I would to buy just a subwoofer because the other speaker is good and the remote and Power adaptor also.
    I search a person who have a same inspire 6700 to sell.
    So i'am french!
    Thanks,
    Best regards
    Vince

    Disappointed wrote:Hey, that sounds familar! I have a similar problem with my 6700 system. No bass or rear centre speaker. Product is just over the 2 year warranty so CL do not want to know. I offered to purchase the bass speaker but it would cost as much as a new system! I am not buying any more CL products again!
    Hey, that sounds familiar! Now where have I read that before? Oh yes, in your other spam posts!
    Message Edited by rico0 on 08-27-2005 11:22 PM

  • Creative Inspire 6700 Failed

    This is a continuation of the post that is now in the read-only forums.
    David Drury - Having contact the Creative support they have finally informed that that in March I MIGHT be able to buy a replacement board for my broken 6700 which just stopped working one day, for 60 euros. That's what it would cost to buy a new system from the link that appears below.
    Here is Creative's direct repsonse:
    "at present we have no out of warranty repair option which would allow me to sell you a subwoofer. This however should be possible in March although I can't guarantee it. In the past subwoofers have cost in the region of EUR60."
    I am very disappointed Creative. This is not an isolated incident and that fact that my product is out of warranty seems irrelevant. It is no longer fit for the purpose for which it was designed. Given the number of compaints about this system on this and the read-only forum I would have expected a repair FOC.
    I shall not be buying another of these systems and my impression of Creative has totally changed as a result of this incident.
    Old Thread
    UserMessage riz NewbiePosts: 2I turned on my speakers today and noticed the sound has completely died. The remote no longer lights up and the only time i get the slightest hint of sound is when I remove the transformer power lead and plug it back in. It's like the surge brings the amp back to life for a breaf second, turn the level up and it gets quieter? It was working fine the day before but today no play.Any suggestions, can I buy just a replacement box if the amp has gone, and what is the warranty on these? Thanks in advance
    Posted:25/10/2005 12:55:06 creativemedd NewbiePosts: 3I have had the same problem. I have tested the remote volume/bass control on a friend's system and it works so it's something to do with the electronics on the board inside the bass speaker cabinet. I have taken this apart (my system's out of warranty) and can find nothing that look's wrong. I'm sure that a single component has broken and am loathed to buy a new system as all of the speakers, etc work. Can anybody suggest anything.
    EditPosted:26/0/2005 14:55:27 Catherina Karskens Forum ModeratorPosts: 5458 This user is from Creative You can contact Customer Support directly to discuss this:http://www.europe.creative.com/support/contact/
    If the unit is out of warranty, they will be able to check for you if it's available seperately (and for how much). - Cat
    Posted:26/10/2005 15:13:42 riz NewbiePosts: 2@ creativemedd.Same here m8, I've had a look around the usual places, namely the one where u buy other peoples junk lol, no good though. Let me know how you get on and i'll do the same or under 50 squid here: http://www.planetmicro.co.uk/product...ockcode=M00924
    Posted:26/10/2005 15:14:02 creativemedd NewbiePosts: 3I have contacted Support as mentioned earlier in this thread. I will also keep looking for a problem on the board. I will keep you informed of my progress. Dave
    EditPosted:26/10/2005 16:06:12 monster_en_co JuniorPosts: 24 monster_en_co is from United Kingdom http://uk.europe.creative.com/suppor...mg/flags/8.gif Same here .... losing sound up down up down .... many people are gettin this now so is this a hardware fault or something ... what can be done ? i've contacted creative customer support and still waiting feedback! http://uk.europe.creative.com/suppor.../img/smily.gif Keep my head up
    Posted:28/10/2005 11:55:09 simon_mcnair JuniorPosts: 20 simon_mcnair is from United Kingdom http://uk.europe.creative.com/suppor...mg/flags/8.gif I bought an inspire 6700 off ebay. When I plug it in nothing happens. I took out the amplifier board and found that a transistor was blown, and that it had taken a resistor with it. I've managed to get the transistor details, but the resistor is a charred heap. I was hoping that someone could either provide me with a circuit diagram so that I can identify the value of resistor R0, or if you could tell me what the value should be.Any extreme close ups of the circuitboard would be sufficient for me to get the colours of the resistor.cheersSimon
    Posted:28/10/2005 12:26:23 monster_en_co JuniorPosts: 24 monster_en_co is from United Kingdom http://uk.europe.creative.com/suppor...mg/flags/8.gif Off Ebay ? Send It Back M8 .... Wudnt Stand For That .... Did they say it was a working product ? if they did then give them bad feedback... and request your money back ? just out ov curiosity how much did you pay for them?
    Posted:28/10/2005 15:50:21 simon_mcnair JuniorPosts: 20 simon_mcnair is from United Kingdom http://uk.europe.creative.com/suppor...mg/flags/8.gif I can't send it back as it was sold as seen. It specifically stated that they did not know if it was working. It's a gamble you take I guess. It is fixable if I can find out the value of the resistor I should be ok. I paid ?35 inc delivery
    Posted:28/10/2005 16:04:12 monster_en_co JuniorPosts: 24 monster_en_co is from United Kingdom http://uk.europe.creative.com/suppor...mg/flags/8.gif O, OK then ..... well bump ... but i can check mine when i get home i suppose ...
    Posted:28/10/2005 16:07:31

    I have the Inspire 7700 and my subwoofer just stopped working as well. Right in the middle of a song. The volume was only half way on the remote. Everything else works fine. Guess I'll have to buy a different brand too since mine is out of warranty I think.

  • External DVD to Inspire 6700

    Hi!
    I'm just wondering if there is a way to connect the 5.1 outputs on my DVD player to my Inspire 6700 speakers? The rear centre wouldn't be used, I know, but is it possible to connect the rest?
    Also, am I right in thinking, having read threads until my head has started spinning, that by connecting the optical out on my DVD player to optical in on my Audidy 2 Platinum will only result in left and right audio?
    Thank you for any help. I'm off to stop my head spinning now!
    Paul

    Thank you for the reply but to be honest, I'm not sure if what you're saying is correct. My DVD player does indeed have six speaker output sockets but don't forget that the Inspire 6700 speaker only have three inputs which are front (l/r), rear (l/r) and centre (c/rc/sub). My DVD player has built-in decoders.
    As for the optical part of the question, I'm pretty sure you only get left and right audio. Can anyone corroborate this?

  • Inspire 6700 DVD connection

    I have a set of Inspire 6700 speakers connected to my present DVD player. The DVD player has six phono outputs: L, R, RL, RR, Ctr, Sub. I've used phono to 3.5mm converters to connect these into the three input sockets on the 6700 system. I am now looking at getting a DVD recorder, but this doesn't have six phono outputs: it has only 2 for L&R. It does, though, have an optical output. Is there a way to convert this output into the required three 3.5mm connectors required for input to the 6700?Gary

    Jason, Thanks for this - it looks like it would do exactly what I want. However, I'm in the UK and all the stores I've tried list it as discontinued. I've tried searching with Google and even looking on eBay, but can't find one anywhere. Do you know if there is a replacement model available?Cheers, Gary

  • Inspire 6700 - NO SOUND

    Hi All
    I have a creative soundblaster audigy 2 ZS and have just purchased some Inspire 6700 6.1 speakers. I have plugged in all the cables as directed and can not get ANY sound through the speakers at all.
    I used to run sound through the AUX of my hhome stereo and this will work fine with my audigy 2, but the 6.1's won't do a **bleep** thing - any recomendatins ?
    Thanks
    Dave

    Yep - the headphones work well in the green socket on the card (line ).
    Is there any way to test the other to sockets which are used by the speaker system ?
    The remote light is green so i'm guessing it has power, but this morning i could hear no click when i powered the unit up like i could yesterday
    David

  • Creative Wireless Remote I200 compatible with Inspire 6700 6.1 Speakers?

    hi all, quick question someone will be able to answer hopefully.
    Is the wireless I200 remote compatible with a set of inspire 6700 speakers? Im looking to upgrade my setup with a few things and this would come in handy - or wireless! )

    I'm afraid they aren't compatible. You can see which speaker works with the remote device from the product page.
    http://asia.creative.com/products/pr...8&product=4565
    Jason

  • Creative inspire 6700 (trouble with the sub)

    I have Creative inspire 6700, for some weeks ago they stoped working, the sub stopeded making bass.
    I dont know whats wrong. I have never treated them badly. When i turned the speaker system off and on again, it was bass in sec. then it disappered again. I have had them in 3 years i think and I dont know whats wrong.
    Can anybody help, and tell me what to do!
    And do I have a guarantee?

    robin882,
    Customer Support should be your contact point if you need assistance with the faulty product. Also, if you already had it for 3 years, generally I believe your warranty are had already cease but you can still contact Customer Support and they should be able to advice.
    What you can try at the moment is testing the speaker on another system and see if the same thing happen.
    Jason

  • Inspire 6700 Whooshing/Popping/Distorted Sound..

    Just bought some Inspire 6700 speakers via eBay..... Also an Audigy Platinum EX card.. Anyways... The sound is awful, constant popping sound even when there is nothing being played (CD/DVD/etc..) When I am trying to play something, the sound is very low, distorted, the popping gets worse and just occassionaly will BURST into life momentarilly.. before going back to it's previous dire performance. Can't be certain, but I think the volume control is broken? Only seems to produce any acceptable sound at about level 4, but even that is marginal/breaks up. Either side of 4 you get almost nothing. The LED on the volume control flickers on and off constantly. I've hooked up my original stereo speakers and they are fine.. no distortion etc. Clues please?
    Edit - Disconnected the 6700 from the Audigy sound card and I STILL get the popping and whooshing sounds....Peter
    Message Edited by jpo on 02-20-2005 08:51 PM

    Hi Cat
    Happy to contact support, but given these are refurb speakers purchased via eBay, are support likely to be that interested? Great if they are.... What's best contact method if you think they may be able to help me? (E-mail/phone)
    Regards
    Peter

  • Inspire 6700 failed = Solution (maybe)

    I am referring to this thread:
    http://uk.europe.creative.com/support/forums/thread.asp?thre=53306
    I had the same problem. Suddenly no speaker worked anymore. I started the Creative Diagnostics program and it said everything was okay. I both tested the speakers in WinXP and Win98. No sound. 2 days later there suddenly was sound again. I wanted to know the reason. Then I opened the amplifier of the Inspire 6700 and my brother examined it. He couldn't see any problems. I reconnected the Inspire 6700 to my PC and again there was no sound. Then I looked into the Diagnostics program again and saw "Mixer settings: failed". Then I clicked on "correct problem" and suddenly there was sound again.
    All this is very weird because at first the Creative Diagnostics hadn't found a problem and now I could fix everything by running it again. Also it's weird the speakers hadn't worked both in Win98 and WinXP although it seems to be a software problem (mixer settings). On the other hand it looks like a hardware problem (sound worked and then again it didn't work). I don't know!
    I hope this could help someone.
    Cya

    Red_Wraith,
    Can you try a pair of earphone and test it on the sound card. Likewise, test the speaker using another device like MP3 player or computer. Just disconnect the green cable you connect to the sound card and plug that into the MP3 player headphone jack. See if you get sound from the front speaker.
    Jason

  • Re: Officejet 6700 printer failure

    6700 printer failure re printrer cartridges reset does not work

    Hi,
    Please follow this HP document for printer failure issues
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03476826&tmp_task=solveCategory&cc=us&dlc=en&la...
    hope this helps.
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Creative inspire 6700 with DDTS-100 ??

    Hi there,?I have the creative inspire 6700 speaker system connected to my PC (audigy2 audiocard) andit works fine. Then i saw the DDTS-100 decoder on the website and it looks like the thing i need.So, it's possible to connect my 6700 system to the DDTS 100 ?and then i can use a digital in/out to the DDTS system and then it will work ?(i have a dvd player that i want to connect)?Greetz,...

    I am sorry but i am new to these forums and i am actually looking for help myself. I have the creative 6. 6700 speaker system and just today dropped and damaged the casing to one of the sattelite speakers. I have searched the internet to see if i can get another speaker or another set. Can you help me. Im in Scotland in the uk but if there is a place i could contact to buy from that you know i would appreciate it. i will see if i can help you soon.
    Thanks.
    mark.

  • Creative Inspire 6.1 6700 subwoofer not working

    I've had set of 6700 speakers for a couple of years now. About a year ago, my PC was upgraded to a 64 bit motherborard, with a crappy on-board sound card (uses Soundmax drivers). With the new motherboard, I lost control of the sound setup, & ended up with masses of bass from the subwoofer. After a while, all sounds deteriorated, & the bass disappeared (along with much sound from the rest of the speakers). I finally got the hell in and invested in a new sound card - Creative Soundblaster Audigy 4 excellent piece of kit. Now I have decent (controllable) sound from all speakers.... EXCEPT no sound from the subwoofer. I have tested all the contacts - everything seems to be plugged in OK. If I disconnect the power lead, I get a dull thud from the subwoofer - so something must be connected! Any suggestions what to try to get the bass working properly again? I've tried the various settings in the sound setup (e.g. max subwoofer volume) but get nothing.

    Gaitje
    Try enabling the CMSS feature of your 5.1 Live! sound card, You could refer to our Knowledge for more information on CMSS.
    http://us.creative.com/support/kb/ar...p?l=2&sid=4883
    Jason

  • Inspire A200 subwoofer not working

    Hi,
    I just recently bought the Creative Inspire A200 speakers (2.1) a few days ago. The subwoofer seemed to be working fine earlier but now no bass or sound is coming out. Basically it isn't making any sound at all. Sounds come out from my two speakers but the subwoofer isn't producing any sounds. I've tried unplugging/plugging it back and I know that everything is plugged in properly. Any suggestions? Thanks in advance.

    Hi cotnightjoe,
    Sorry no answer - I got the same problem. Tried all jacks with my ipod, which showed up the centre speaker as muffled.
    Can someone please provide some ideas?
    Thanks

Maybe you are looking for