Inspire P5800 5.1

wonder if anyone can help me , had the usual controller problems , that were thankfully sorted out by returning the set to the shop n getting a replacement set of speakers .... why dont more people just do this? prob is .... can anyone tell me the Ohms rating for this set of speakers as im considering adding in some better quality satellites ..... yeah i know . it will make a mess of the warranty but .......
cheers Kickie

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Similar Messages

  • Problem with Rear Speakers (Inspire P5800)

    Hi,
    I have bought the Inspire P5800 Sound System but I have a problem. When I do a soundtest with the driver software all speakers work but when I want to listen to music with Musicmatch Jukebox I don't get any sound on the rear speakers. I have on board AC97 sound on a Gigabyte K8NS motherboard.
    Can anybody help me?
    Thanks!
    robertthronhill

    robertthronhill,
    That's normal as music are mostly in stereo and that's 2 channel only. Creative sound card have CMSS feature that upmix stereo to surround soundfield but since you are using onboard audio, you will have to check with your mainboard manufacturer if those audio card have similar feature also.
    Jason

  • Please help me with disabled Inspire P5800

    My speaker system "Inspire P5800" was perished. There was some smoke. When I opened subwoofer I saw four burnt transistors. Also I saw one element (ZD. I think it stabilitron in glass body) was broken (divided in two) as a result of high heat. I was very pained. Does anybody know why the system was broken? Maybe it happened because I always used it with maximal value of volume, how you think? Do you know what mark is the mark of element which is marked "ZD" at circuit board? Has anybody basic circuit of amplifier of "Inspire P5800". If you'll answer to my question please be more easy (my English isn't so good). Thank you!

    I do not think that everything is already set as the password, the new e-mail. Now I have to update the application with no.
    And a warning, as it!! Your Apple ID has been disabled!!.
    If possible, you may be able to check my ID.
    And to the point. So let me do the right thing.
    ..............................................Thanks again......................................................

  • Replacement Wired Remote Creative Inspire P5800

    Does anyone know whether you can buy a replacement wired remote from a Creative Inspire P5800? I've spent all morning going in circles on their website. The headphone socket is defective on mine, and I don't really want to buy a whole new system if I can help it.

    Hey, I had the same problem some time ago with the same set. My solution was to make the wire straight and don't twist it anywhere. After that it all worked fine. Good Luck

  • Some INSPIRE P5800 Problems

    Hi, everyone, first time poster.
    I have had Creative Inspire P5800 5.1 speakers for a couple of months now, which I run with Realtek AC'97 (onboard sound). However, there are two specific surround sound related problems that are bugging me.
    1. Windows XP sounds are only played in the two front speakers, but not in any of the rear speakers, center speaker, or subwoofer.
    2. This may not be the best place to ask this, but I use InterVideo WinDVD 6 Platinum to view DVDs. Since I want to configure it for surround sound, I change the player from a 2 channel configuration to the 6 channel configuration. However, the program is unable to detect my surround speakers, and therefore simply duplicates the front stereo for the rear speakers. The subwoofer doesn't seem to function.
    My drivers are up to date and my Sounds and Audio Devices (Control Panel) is configured to my 5.1 system. Any ideas for why this is happening? Help is greatly appreciated. Thanks!

    NoradX,
    Stereo are 2 channel only so it's normal that you obtain left and right output only. Depending on the features of the onboard audio, it may have upmixing feature to mix stereo to multiple output for a surround effect. Best to checkup with them the correct setting for the audio card.
    Jason

  • Ddts-100 and inspire p5800

    are the creative inspire p5800 speaker system compatible with the ddts-100 decoder?
    Is the decoder connectable to the K|i|s|s dp-1000 DVD Player?

    Gr33nC0d3r,
    Yes, the speaker is compatible with the DDTS-100 decoder. Also, you should be able to connect to the decoder without problems since the decoder have coaxial/optical input which most DVD player should have. What type of output connector does your DVD player have?
    Jason

  • Inspire p5800 - center speaker doesnt work

    hi there...
    i got a little problem... i have SB audigy 2 and inspire p5800...
    I set i up and the center speaker doesnt work at all.. no madder what i do.. i can hear the center speaker snear or something.. but i cant hear any music from it at all...
    If i try calibrate the 5.1 the center speaker makes sound like it was the subwoofer... any solution for this? i checked the cables and they are in the right places..
    hope ya can help
    Jones

    Hm, that is certainly odd......make sure the jack that goes from the subwoofer to your sound card is in the correct spot.
    Not sure but you may have 3 wires going to your soundcard - refer to the user manual for the correct order.
    If you are using digital - well then - I don't have a clue unless you hooked that digital cable to the wrong place on the soundcard as well.
    Good luck.

  • Can a inspire p5800 be used without a computer, as a stand alone speaker system

    Can an Inspire P5800 be used as a stand alone speaker system? Here is my story. I just got this speaker system from my girlfriend who did not know that it had to be hooked up to a computer/soundcard etc... She thought it would just hook up to my MP3 player and be used as a speaker system downstairs in my shop. It looks like the decoder DDTS-100 could be bought and used as a stand alone sound adapter? Or is there a cheaper way? The only other way I can see is a triple headphone adapter that has one 1/8 inch plug going to three 1/8 inch jacks that can be fitted with a 1/8 inch plug to plug cable in each jack, then those going into the back of the subwoofer/connector area. Would that be a mono source that way? Any help would be appriciated. marc

    I have set this system up with a creative zen vision m without using a computer just stand alown, but i have only been able to get the subwoofer, front left and right speaker to work. I dont know if that helps.

  • Creative Inspire P5800 5.1 Speakers Only the subwoofer and front 2 speakers work HELP!!

    Hello,
    I have got the "Creative Inspire P5800 5.1 Speakers." I have connected all the speakers to the subwoofer and plugged my Creative Zen Vision : M into the AUX socket on the back of the subwoofer using a jack to jack cable. When i play music only the subwoofer and the front right and left speakers work is there anything i can do to change this? (I have got no Computer involved)
    Any help would be appreciated,
    Chris.

    Hi all do you have any idea to solve my problem?
    Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
    -Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
    -or maybe my component circuit like ic,capacitor,diode burned?
    If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
    Please answer me...
    Thank You

  • Asus A8N-E onboard Realtek AC97 and Creative Inspire P5800's

    I am attempting to connect some creative inspire p5800 speakers to the realtek AC97 audio on my A8N-E. But when I run the connector sensing it senses the jack i have plugged into the lime/green socket as stereo line in. In the speaker configuration the lime/green socket is identified as Front speaker out. The jack at the other end of the lead is plugged into the correct socket on the subwoofer. The rear and center speakers work fine.Any ideas would be greatly appreciatedThanks

    well there jason, since you asked, there are some of us who have the P7800 where there are four plugs on the side of the speakers and only three plugs on the computer side with asus mother board needing four. The only way around it is to disconnect the grey plug which is the bass and side speakers and bootleg to the bass which isn't how it is supposed to work.

  • Problem with Inspire P5800

    When I connect my headphones (Creative EP 80) to the remote control of Creative Inspire P5800, it's satellites don't mute automatically
    I have integrated souncard based on ALC 655 and Windows XP (licensed).
    What should I do to solve this problem?
    sorry for my mistakes in english, it's not my native language
    Message Edited by Konstantin on 01-27-2007 10:25 PM

    I think it depends on the soundcard, I don't know that model, but maybe it simply isn't able to sense a headphone is plugged in? I know SoundMax chips are able to, and Sound Blaster probably are too, but I can't seem to find that piece of information on realtek's site... So (please other users, correct me if I'm wrong!!?) I'm afraid you are just going to have to learn to live with muting center, LFE/Sub and surround channels when using headphones...
    EDIT: I think the headphone jack will still work if you switch the set off, would be easier than resetting all volumelevels everytime you are done using the headphones.
    Message Edited by hij on 01-28-2007 02:31 AM

  • Can't get Inspire P5800 to play...

    I have a PC that is about 3 years old and has a Soundblaster Audigy 2 soundcard. I bought P5800 5.1 speakers today but cannot get it to play sound from the jacks that are listed in the instructions. I can get sound from another set of non-colored jacks but only out of one of the jacks, where as I have three inputs to use. I think there is some sort of software choice I need to make but there is no real documentation with the speakers at all. Any help? Thanks Steve.

    Possible conflicts if the file is on the server :
    You use the Windows version [at your Host|http://www.fasthosts.co.uk/hosting> > +Internet Information Services (IIS)+
    See if you can change it to Unix/Linux.
    The server does not support .m4v files. Or does not understand the extension. Verify it.
    Here's how to verify it. Go to your server and, if present, change the extension of the movie from .m4v to .mov
    http://www.nocturndance.co.uk/nocturndance/Media/soloformany-mobile.mov
    Display the movie in the browserwindow. If it plays, the movie is ok.
    If not than item 2 is the problem.
    Message was edited by: Wyodor

  • ProGamer G500 vs Inspire P5800

    I currently have the P5800 set, and wondered how much better the sound quality would be from the ProGamer G500 set. I am not particularly bothered about volume, just sound quality.
    Also- I listen to a lot of music and have read reviews saying that the G500 suffers from poor treble when listening to music, making it sound "dull". What are your thoughts on this? Are there any better systems you would recommend for gaming/music.
    Thanks!
    P.S. I have a Soundblaster X-fi Xtreme Music.

    Doctors wrote:
    I've tried every driver the creative web offered me to download. For Li've! 5. Digital of course. What are kx drivers? Some smart ones instead of Creative ones?
    Maybe not yet, but many feels they're better than original.
    But if you're gamer and need EAX then forget them.
    Here you can find them http://kxproject.lugosoft.com/intro.php
    .jtp

  • Creative Inspire p5800

    Hi,
    Ive just bought a set ov these speakers, hooked them up and nothing, i've also tried connecting them to an mp3 player via the 'aux in' port, but still no joy.
    Are they knackered?

    Hi all do you have any idea to solve my problem?
    Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
    -Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
    -or maybe my component circuit like ic,capacitor,diode burned?
    If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
    Please answer me...
    Thank You

  • Wired remote for Inspire P5800 5.1 speaker system

    Well about two days ago, i started having a problem with the remote that came with my speakers. It seems that somthing inside the remote has come loose, because when i move it around in certain positions i have sound, then if i move it again, i dont. I find it hard to belive that the money i saved up to buy these speakers is wasted because of some horribly made remote they came with. Heres my question, is it possible to get a new one, whether or not creative wants to man up to it or if i have to buy one i dont care, i just want to be able to use the speakers which have nothing wrong with them. Or, are there any systems out ther now that have compatible remotes.

    Hey, I had the same problem some time ago with the same set. My solution was to make the wire straight and don't twist it anywhere. After that it all worked fine. Good Luck

Maybe you are looking for