Inspire s2 wireless turns down the volume by itself.

Hey. I bought my Inspire about a year ago and it worked fine.
Then suddenly when i connected it to my laptop it turns the volume down. I can turn it up again but it just keeps muting.
First i thought it was my laptop settings and i'm not a geniuos with computers.
But then i connected the speakers with my iPod touch and it still turns down the volume totally random. It does it approx every 5 minutes.
Can anyone tell what the devil the matter is?
(Sorry for my english, i'm danish :P )?

Hi,
Sorry but this doesn't sound right, I suppose something's wrong with the speakers. You might want to contact Customer Support for assistance.

Similar Messages

  • Turn down the volume of built-in speaker before playing music

    So I was wondering if there was any way to turn down the volume of the built in speaker prior to playing music/video. I imagine that if I'm REALLY quick and pause the action, I can turn it down, but I'd rather not have to race against time.
    The context for this, is the desire to show someone else video on the iPhone (say a National Geographic video podcast) without the audio blasting forth.
    Any ideas?

    So you're saying the phone doesn't remember the previous setting you had it at and jumps up or something...?
    ..or you want to hit play and have it not play so you can adjust the volume first...sorry can't help if that's the case. It kind of doesn't make sense from a UI perspective, when I press play or start a video I want it to play....different strokes for different folks tho

  • How do I turn down the volume of the Media Browser in Audition?

    See subject above/

    I'm using an RME Multiface II and mixing in 5.1, but the point is that the project is very quiet, and many of my samples are loud. If I turn down the whole thing, I can't hear the soft project over the loud samples that I'm trying to add. (When I'm working in Acid or Reaper with loop-based stuff, I can simply turn down a volume slider in the media browser equivalent.)
    -SCP

  • I have an I phone 4 and since I upgrade to the lastest ios  6.1.3 , my volume slider is missing. The sound works when but I can't mute or turn up or turn down the volume. I've tried a hard reset , reboot, blowing air in the dock and earrplug jack. :-(

    I tried almost evrything to restore my volume slider( + & - ). My phone rings, plays music and every other sound but I can't mute or put  the volume up r down with the side buttons.. My volume slider bar is missing. This is only simce I upgraded to iso 6.1.3 .. What's with that?? I figured out how to manually  mute the phone through (General, Accessibitily) by muting the bell for sound and unmuting the bell for silent mode. But what a freaken pain, when you have to take all those extra steps to turn your volume up or down or  mute your Iphone??
    We have no Apple Store here so no luck to bring it in to get looked at.. Please , does anyone out there know what else I coold do???
    Cheers

    Does it work with headphones plugged in?  That is typically the culprit, the device mistakenly believes that a pair of headphones are plugged in.

  • TS2634 My EarPods keep randomly turning down the volume when I'm listening to music?!?!? does anyone know how I can fix this, or will I have to invest in a new pair?

    this is so annoying! I will have my volume at the usual 6, and I'll listen to music and i won't touch anything but it turns the volume down until eventually there is no sound. this does not occur without the EarPods.

    If still in warranty return to Apple for evaluation
    Worth trying a restore of iPhone to eliminate a software issue ...and
    Do they work in other devices

  • Even when I turn down the volume in a clip to zero in imovie '11, but it still plays the audio! I can't get it to stop playing the audio. Any help?

    this problem with audio began yesterday but before that it was fine! this is a brand new macbook pro...not even a week old!

    Does it work with headphones plugged in?  That is typically the culprit, the device mistakenly believes that a pair of headphones are plugged in.

  • Skype turns up the volume of people in the call

    I am having a problem with my skype. 
    Just to get it out of the way, i know that a lot of people have problems with skype turning down the volume of other programs. I know how to fix it. That is not my problem.
    Instead of turning the volume down, my skype acts opposite, so when im in a call, and i listen to some music in the background, skype turns up the volume of the call to an unbearable point, so i cant listen to music or have sounds activated in games while talking to other people on skype.
    I have not been able to find anything on this problem on the internet, and i hope that someone knows how to fix this problem.
    All answers are appreciated

    Hi:
    Try this:
    Highlight all songs in Music.
    Right click, Click on get info, Click Yes,
    Click Options, Slide the bar to the Volume you require,
    Click OK.
    When you re sync the ipod the volume is much higher. I adjusted mine to 100% and it works fine. I also use an FM unit and you can still control the volume via the Radio. On my mates new Radio it shows up the songs as well on the radio screen via this method:
    ARG.

  • My 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

    my 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

    I had the same problem- go to Utilities, General, Use Side Switch To, and change it from Mute to Lock Rotation- this solved the problem for me.
    Good luck!

  • How can I turn off the volume limitor on my ipod nano?  I want to play it with a docking station, it is no where near as loud as an old 4GB ipod!

    Hello, please can you tell me how to turn off the volume limiotr on my ipod nano?  I want to play it on a docking station and it just isn't as loud as I want it to be.  An old ipod is much louder.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

  • Ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If within warranty (yours is since the warranty is one year) and not abused, Apple will exchange it at no cost.

  • My Gigaworks S750 system distorts when i turn up the volume... Please Help Me

    My Gigaworks s750 has been stuffed from day . It's about a year old. How is it stuffed? turn up the volume and some speakers distort. Its not the speakers, i tested by swapping them around, so the amp in the sub is stuffed. Can i pay creative to fix this? any ideas on cost? If not can i take out the AMP and buy one and plug that into it to replace the broken one?
    Thanks!
    Regards, Mortagen

    You're right, it's over my head. I have no understanding of bitrates being sent too fast to the subwoofer, perhaps your brother can break it down into layman's terms for you and then you can enlighten us. With regards to Creative charging you $200 to fix it, it sounds like you've already sent the speakers to Creative. As I understand it from past experience and from what others have posted, Creative never quotes a repair charge until they have had an opportunity to diagnose the system to determine the level of repairs needed. That, of course, would also conflict with Creative's more current policy of not doing any out-of-warranty repairs at all, and not providing any support for any product that is out of warranty.
    The crackling that you're hearing is probably there at all levels, you may just need to turn it up to the 50% or above level for it to be noticable. If this is an issue that has just exhibited itself in the last 6 months or so, there is probably a loose or fatigued connection someplace. The most likely is probably one of the 3.5mm female jacks on the subwoofer, or a wire that may need to be replaced.
    andrewc289 wrote:
    I posted about the same issue. It is not normal distortion, most likely a bad amp. I am looking into how I can fix this myself also since creative wants over $200 to fix a product that broken because of their poor design.
    Check out the thread that involves repairing the sub, it may be a little over your head though.

  • My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. Any tips?

    My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. I tried restarting it a few times, nothing worked. I looked up many tutorials, and still nothing did the trick. Any tips?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Is there any way to turn off the volume rocker of the side of the iPad?

    Is there any way to turn off the volume rocker of the side of the iPad?
    Please help!!!!!! I forever have the square with the volume control on my screen because my volume rocker does not work.

    You could try a reboot:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad should restart.  If that doesn't get rid of the volume control box on your screen, it's time to make an appointment with the Genius Bar at your Apple Store, and they can send your iPad off for service.

  • How can I turn up the volume of music on my ipod?   how about with I-trip?

    I have certain songs that just do not get loud enough to hear and I am not sure why. They come out just fine if I put them on a cd and play them that way. However on the ipod and trough my i-trip for the car they are extremely low and some are practically inaudible. Any help would be appreciated. Thanks for your time.. one and all. Kat

    Hi Kat, welcome to the fourms.
    Have you tryed turing up the volume on your iPod itself? Or turning up the volume in the car?
    There is another way to adjust the volume. If you go into iTunes. Right click on a song. Then you can select "get info". When that pops up, select "Options", then you can adjust the volume there.
    If you want to do it to your entire library, or a ig ammount of songs. Select the entire list of songs that you want, then right click and get info. A box should pop up saying something like "You are about to edit info for multiple songs. Do you want to continue", then click yes, and you can adjust multiple songs that way.

  • HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

    how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

    Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
    The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
    Hope this helps.

Maybe you are looking for