Inspire T5400 Remote problem

Hello everyone, I bought two (or three?) years ago a Creative Inspire T5400 which is really usefull and enough for my little flat ;-) By the way, i just let a lot of times my wired remote on the ground, it even fell down as often The problem is that now, it's broken :'( Can I order one somewhere? I'm from belgium and i dont see stores in my country. How much would it cost?Thx 4 replying !!!!!
Y0dA

You can get this remote from the online store for your speaker system.
http://be-fr.europe.creative.com/sho...0&product=607&
Jason

Similar Messages

  • Inspire T5400 Speaker Problems

    I am having a problem with my Inspire T5400.
    Let me explain what happened.
    I was playing Doom3 and the sound was up pretty loud (sounds awesome btw) and my roomie asked me to put my headphones on! LOL
    Sooooo? I grab the headphones and go to plug them in the volume control unit and there was a little bleep sound and now the speakers don?t work!
    Has anyone else had this problem and is it the volume control module or the sub woofer?
    I plugged the headphones directly into my computer via a front headphone jack plug on the box and it works fine.. just no sounds coming from my T5400 anymore.
    Any suggestions?
    Should I purchase the Volume control module or ?

    Well.. I tried that a dozen times when it first happend.
    I think I am just going to buy a whole new setup... tech support is telling me that I either need to send it to them for fixing, which costs a fee because I am no longer with in the warranty period.
    I think I would rather keep the speakers and stuff for a back up to the new one I am going to buy!
    I found the same setup at Walmart for much cheaper, but I will have to order it as I doubt it is something that is in stock up here in Alaska..at least at the one store I called closest to me.
    Anywho, thanks for the post, appreciate it.
    D out

  • Creative Inspire T5400 Center Speaker Problem

    Hey Creative,
    I use the Audigy Platimum Sound Card with Audigy drive with Inspire T5400 speakers. Ever since i got the speakers I have noticed either the center speaker plays so quiet its almost not hearable or it doesn't play at all. This happens for music alot. I checked all the hookups and I got the AudioHQ and Windows set for 5.1 surround speakers. What is the problem?
    Thanx
    Adam

    Adamb10,
    You will need to enable CMSS though Playcenter for the Audigy. Launch playcenter and put it in player mode (not jukebox mode) on the right hand side there is a button that expands out the player to display a number pad. At the bottom of the numbers there is a button marked CMSS, set it to on or movie mode and it should give you what you want.
    Jeremy

  • Inspire T5400 Bad Screeching Noise

    Hello,
    I just got the Creative Inspire T5400 5.1 speaker system from Newegg a half a week ago and everything seems to sound really good... except for the fact that when these speakers idle right after a song or loud noise in a game, they will make this really weird noise that's very high in frequency. My parents can't hear it (the older you get, the more hearing loss :S), neither can my sister, but I can and it really distracts me from the good sound coming from these speakers. This doesn't only happen when some loud noise or song finishes, sometimes they'll do it constantly while there is a lot of sound and it really throws you off.
    I'm not sure how you can describe the noise, I mean, it's high pitch... but the closest I can compare this to is if you have ever heard someone turn on night vision in a game, that screeching noise that goes up is pretty close to what these speakers do. I know it's not my sound card because I just had it replaced by a Sound Blaster Live! 24-bit and this issue still takes place. I don't know if these speakers are somewhat defected or if it's just what they do.
    Any help would be GREATLY appreciated...
    Message Edited by icedog90 on 05-16-2005 07:18 AM

    icedog90 wrote:Hello, I just got the Creative Inspire T5400 5.1 speaker system from Newegg a half a week ago and everything seems to sound really good... except for the fact that when these speakers idle right after a song or loud noise in a game, they will make this really weird noise that's very high in frequency. My parents can't hear it (the older you get, the more hearing loss :S), neither can my sister, but I can and it really distracts me from the good sound coming from these speakers. This doesn't only happen when some loud noise or song finishes, sometimes they'll do it constantly while there is a lot of sound and it really throws you off. I'm not sure how you can describe the noise, I mean, it's high pitch... but the closest I can compare this to is if you have ever heard someone turn on night vision in a game, that screeching noise that goes up is pretty close to what these speakers do. I know it's not my sound card because I just had it replaced by a Sound Blaster Live! 24-bit and this issue still takes place. I don't know if these speakers are somewhat defected or if it's just what they do. Any help would be GREATLY appreciated...
    You are correct, I have exactly the same problem and am doing a second RMA on my T5400 speakers. A bit on the weird side though, when I tip the subwoofer towards me, the sound fades away momentarily. Something internally wrong indeed...
    Message Edited by BDahl on 05-15-2005 06:44 AM

  • Inspire T5400. Lost Volume Control. Any way to "hack" the input for the Volume Control?

    Hey. I've lost the volume control for my Inspire T5400. Is it possible in any way to "hack" it to make the volume on the loudest? I dont have to be able to lower the volume.. I'll just do that on my pc.
    Thanks
    SpiXe - And sorry for my english ^^,

    prvs wrote:
    Dear Altenbach,
    The VI that you have posted in (Max8Discard.vi) in Limiting Input String Length
    limits the entry of string control to required length but it doesnt limit the entry of special characters.
    If you have any simple way to do the same it will be very helpful
    Thanks in advance...!!!
    Regards,
    Praveen PRVS
    Just change the check after the Lexical Class function.  If you just want numbers and letters, then use the In Range & Coerce function to check for class numbers 3 through 5.  Play around with the logic some more until you get what you need (I'm thinking that AND should be an OR).
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Inspire T5400 No Sound Remote Problem???

    So this might be a lost cause because my speakers are quite old but no sound is coming out of them now.
    The green light on the audio remote is on and I can connect headphones and hear the sound that way but the speakers are dead silent. If it's a fuse then the green light on the remote wouldn't be on right?
    In any case this remote has been giving me trouble for a long time and stupidly I procrastinated on getting a replacement until the point (now) when Creative no longer sells the audio control pod. Oh but they still have it on their website (for archival reasons says a Creative customer service person) which is VERY misleading to customers. (http://us.creative.com/products/prod...0&product=9858)
    I would rather not get new speakers so if somehow one of you has?the remote controller for the T5400 or the audio control pod, I would be willing to pay well?for it plus shipping costs (we can talk about details later).
    THANKS!

    Hey KokChoy,
    Thanks a lot for your help!
    Unfortunately, I called creative today and it the same issue. They don't have any stock for the I200 remote and they will never have stock anymore. It still boggles my mind why they have these accessories listed on their website without a marking saying "Out of stock" or "No longer for sale" etc.

  • Remote problem - no skipping songs?

    hello all,
    I've been really enjoying my dashy looking iPod Hi-Fi, but since I updated my iPod this afternoon I can't get the remote to work properly!
    It still responds when I up/down the volume, but it won't skip any songs or jump to previous ones (the indicator does turn green though).
    Ideas anyone?

    Hello Destian,
    It could be your iPod having the problem instead of HiFi.
    I had the same experience with my 60G Photo but not my Nano when I plug it with my HiFi, until I did the Erase for my 60G iPod (under the disk utility)with the security option of zero out data, which took about 1-2 hours to complete. Now it works as a charm
    If you have another iPod, you can have a try - to confirm whether it is the problem of your HiFi or your iPod.

  • TV @nywhere master - infared remote problem

    I bought the card a few days ago and it runs perfectly fine. I installed the latest software from the MSI site. The only thing is the remote doesnt work. Doesnt respond at all. Ive tried reinstalling the software, unplugging the reciever and re plugging it back and replacing the batteries on the remote and nothing solved it.
    I cant figure it out, was just wondering if i could get some help please.
    Thanks
    Porkeh

    You have nothing to apologize for.
    After waiting for 16 days, the only way to prevent the post from dissapearing under the radar, is to update the post yourself. Your post content was not unreasonable under the circumstances.
    If there is a sense of argument, it is not of your doing it is mine.
    New members of this forum typically have a problem, that's why they are here. Unless you have run afoul of a strict forum policy, you should be welcomed, not scolded; and then only by forum moderators who have through experience learned the gift to scold with diplomacy.
    I'm sure KT just misread the posts. I have the advantage of hindsight; at the time of posting he didn't.
    Good luck with resolving your problem. Before you go out and buy a new power supply though expecting to resolve your problem, I would investigate the software end a bit more.
    I may sit down and play around with my remote control and get a better understanding of how it works. If I run into anything else that might be useful, I'll be back.

  • Toshiba tv 37av502u and comcast remote problems.

    Hi, I have a toshiba 37av502u and I am having problems getting the codes for the silver/gray remote to work the volume and power. Some of the codes will briefly only work volume up and power. Then nothing. TV remote still works fine, but need proper code and maybe a better procedure? Of course you know comcast is no help at all. Batteries are good.

    Unfortunately, Toshiba doesn't know what codes will work for a third-party remote. They're not preset codes that Toshiba specifies.
    - Peter

  • Remote problem

    hi everyone!
    the last 3 days i spent figuring out, how to get my iphone back on my desktop's itunes library, i hope, someone can help me
    my whole story:
    everything worked perfect. after updating to os3 i had these strange wifi-problems. i brought it back, and after 4 weeks i got a new one back. everything seemed perfect again, but then i then i tried to start connecting via remote, but my iphone just shows up on my laptop.
    because this was the only reason to change my iphone, i seriously tried everything, to make it work again. so i checked firewall settings, router settings, re-installed itunes, and then the whole computer.
    now in win7 i had the same problem, so i again checked a lot of preferences, but did not suceed.
    i am using a thomson cable router, getting my ip adresses automatically and have ssid/wpa2 running.
    however, i hope someone can help me getting my phone back to my standard desktop.
    thanks in advance
    andrew

    Hi everyone !
    Have the same problem since I updated iTunes to version 9 (and sup.) and iPhone OS to version 3 (and sup.).
    I can enter the code on iTunes, then after telling me I can remote control my iTunes from my iPhone, I cannot connect and allways have the same message "can't find the library".
    What I've already done :
    - completely reinstall my computer
    - deactivate Windows firewall and Base Filtering Engine, then restart it
    - deactivate my router firewall
    - deactivate any filter on my router, then reboot it
    - delete Remote from my iPhone, reboot it, then reinstall Remote, and reboot again
    - activate library share on iTunes
    - activate public folders share on Windows
    - remove sim card to be sure to use wifi, and only wifi
    - enter the 4 digits code on iTunes (worked)
    - still the same message on iPhone : can't find the library
    I've seen many posts saying that the computer needs to been wifi connected, and not via Ethernet. Is it true ??? It perfectly worked with older versions of these programs, why would Apple have made a change like this ??
    Anyone with an idea ???

  • [Athlon64] RS482M4-ILD MCE remote problems

    Built a htpc based on the RS482M4-ILD which is working great. The only problem I've got is that when the board is brought out of S3 standby using the MS Media Centre remote, it stops working - its like the USB ports aren't being re-initialised properly, The only way to get the remote working again is to unplug it and re-insert it.
    Any ideas?
    Si

    Quote from: simonf7 on 20-December-05, 14:38:38
    Built a htpc based on the RS482M4-ILD which is working great. The only problem I've got is that when the board is brought out of S3 standby using the MS Media Centre remote, it stops working - its like the USB ports aren't being re-initialised properly, The only way to get the remote working again is to unplug it and re-insert it.
    Any ideas?
    Si
    Known issue with ATI southbridge USB failure in suspend. No fix yet from ATI. Its an ATI problem - its specified in release notes for mb chipset /igp driver

  • ISight, Front Row and Apple remote problems

    I've been using my iMac G5 with the built in iSight for a month now with no problems, however a few days ago I tried to pause iTunes with the remote and nothing happend.
    I have since tried to use Front Row and cannot launch it with the keyboard shortcuts, or indeed, find it anywhere on my hard drive. Very strange as I have certainly not deleted it and only updated it to 1.01 recently.
    I have also tried to use my iSight to test the remote using an Apple help sheet but when I launch iChat AV it tells me I have no camera installed! I know it did work as I took a photo of myself when I first set the Mac up.
    Apple's advice on deselcting the 'Disable remote control infrared receiver' checkbox in 'system preferences>scurity' confuses me further as I cannot find this checkbox anywhere.
    I have performed all the updates with Software Updat, repaired permissions and checked the disk with no problems found.
    Any advice?
    Thanks in advance. Jon
    iMac G5   Mac OS X (10.4.4)  

    Front Row will be included with the next version of Mac OS X to come out next year, version 10.5 (Leopard). Until it's released, there is no legal way for you to use Front Row. Also, until it's released, we won't know what hardware will work with it (as far as remote controls). If history is any indication, it will be a $129 upgrade for your current Mac mini.
    There are a couple of options for you right now, though. There's a shareware program called Media Central that will work similar to Front Row for you.
    -Doug

  • Inspire t5900 power problem....maybe

    This morning when I switch on the pc the speaker system don't work....(inspire t5900)
    The volume control don't work (the green light is off) ....
    I think that problem is the power supply adapter (maybe the warm because in italy it's very very hot) but it's only suppose...the sound card working good...
    I can verify the problem?
    thaks in advance
    bye bye
    Max
    P4+WINXPSP2+AUDIGY 2 ZS

    i'm sorry I've verify..... the power supply adapter working...
    I think...the problem is the speaker power volume control because I have try the headphones and the sound is good...and the power working but the green light of the power/volume is off and the speakers are mute...
    ah....sorry for my english....
    bye bye

  • NAC OOB L3 remote problem

    Hi All,
    I have remote site with above design. "login" is gray out in CAA. I run tcpdump on NAS, and I saw packets are hitting eth1 on NAS. In NAM, I got this error message "Unable to process out-of-band login request from [00:00:00:00:00:00 ## 10.111.18.3] Administrator. Cause: MAC address of 10.111.18.3 not found.".
    any idea would be very appreciated. if you need more information, please let me know. it's kind of urgent.
    thanks
    Alex

    Hi Faisal,
    I am pretty sure SNMP is right. switch has been added to NAM successfully. so there is no SNMP issue. I have this problem for the users in remote location only. users in local location can login without any problem.
    any suggestion would be appreciated.
    I am using 500 Express switch in remote site. is it causing the problem?
    thanks again.
    Alex

  • Audigy 2 ZS and Inspire T7900 Serious Problems!

    Hey Guys I'am a guy from germany and I have serious problems with my speaker system!
    Following System:
    Windows XP Professional with SP2Creative Audigy 2 ZS SoundcardCreatice Inspire T7900(7.1) Speakers
    My Problem:
    No Surround!My Card is configured to 7.1 Speaker System, I have the newest Drivers from the page and all is 100% correct connected although wenn i make a Speaker Test in the THX Konsole the Guy only speaks from the Front speakers!!left frontspeaker: front left,side left rear leftright frontspeaker: front right, side right, rear right, front middle
    (order of the announcements aren't right here)
    when i connect 2.0 speakers from my brother to the green plug the same happens!!
    What's going on here?!! is that a BUG?
    please help
    grettz Kai

    It sounds like the soundcard drivers aren't installed properly or aren't being properly configuring the speaker settings.
    Try changing to 2.0/2.1 and 4.0/4.1 and see if those modes work with the speakers connected as they are. If they do then 'tis a software problem and uninstalling and reinstalling the Audigy drivers should fix it (hopefully).

Maybe you are looking for