Inspire T5400 Speaker Problems

I am having a problem with my Inspire T5400.
Let me explain what happened.
I was playing Doom3 and the sound was up pretty loud (sounds awesome btw) and my roomie asked me to put my headphones on! LOL
Sooooo? I grab the headphones and go to plug them in the volume control unit and there was a little bleep sound and now the speakers don?t work!
Has anyone else had this problem and is it the volume control module or the sub woofer?
I plugged the headphones directly into my computer via a front headphone jack plug on the box and it works fine.. just no sounds coming from my T5400 anymore.
Any suggestions?
Should I purchase the Volume control module or ?

Well.. I tried that a dozen times when it first happend.
I think I am just going to buy a whole new setup... tech support is telling me that I either need to send it to them for fixing, which costs a fee because I am no longer with in the warranty period.
I think I would rather keep the speakers and stuff for a back up to the new one I am going to buy!
I found the same setup at Walmart for much cheaper, but I will have to order it as I doubt it is something that is in stock up here in Alaska..at least at the one store I called closest to me.
Anywho, thanks for the post, appreciate it.
D out

Similar Messages

  • Inspire T5400 Remote problem

    Hello everyone, I bought two (or three?) years ago a Creative Inspire T5400 which is really usefull and enough for my little flat ;-) By the way, i just let a lot of times my wired remote on the ground, it even fell down as often The problem is that now, it's broken :'( Can I order one somewhere? I'm from belgium and i dont see stores in my country. How much would it cost?Thx 4 replying !!!!!
    Y0dA

    You can get this remote from the online store for your speaker system.
    http://be-fr.europe.creative.com/sho...0&product=607&
    Jason

  • Creative Inspire T5400 Center Speaker Problem

    Hey Creative,
    I use the Audigy Platimum Sound Card with Audigy drive with Inspire T5400 speakers. Ever since i got the speakers I have noticed either the center speaker plays so quiet its almost not hearable or it doesn't play at all. This happens for music alot. I checked all the hookups and I got the AudioHQ and Windows set for 5.1 surround speakers. What is the problem?
    Thanx
    Adam

    Adamb10,
    You will need to enable CMSS though Playcenter for the Audigy. Launch playcenter and put it in player mode (not jukebox mode) on the right hand side there is a button that expands out the player to display a number pad. At the bottom of the numbers there is a button marked CMSS, set it to on or movie mode and it should give you what you want.
    Jeremy

  • Center Speaker problem

    Alright I got a Audigy 2 ZS card and Inspire T5400 5.1 speakers. Somehow my center speaker doesn't work, and it didn't even pass the test either. But when I unplug and replug it I can hear it do the scratchy sound. Anyone know what my problem is?

    I have a similar problem to the above message. I have SB Live! LS sound card, and a Creative 5.1 speaker set (not sure which one). When I test the 5.1 surround speakers with Creative AudioHQ, I hear the test voice say, "Center speaker." But, in all other applications I hear nothing out of the center speaker. Windows Media Player, PowerDVD, EAX enabled games, none of them put sound out the center speaker. Please help.

  • Inspire T5400 Bad Screeching Noise

    Hello,
    I just got the Creative Inspire T5400 5.1 speaker system from Newegg a half a week ago and everything seems to sound really good... except for the fact that when these speakers idle right after a song or loud noise in a game, they will make this really weird noise that's very high in frequency. My parents can't hear it (the older you get, the more hearing loss :S), neither can my sister, but I can and it really distracts me from the good sound coming from these speakers. This doesn't only happen when some loud noise or song finishes, sometimes they'll do it constantly while there is a lot of sound and it really throws you off.
    I'm not sure how you can describe the noise, I mean, it's high pitch... but the closest I can compare this to is if you have ever heard someone turn on night vision in a game, that screeching noise that goes up is pretty close to what these speakers do. I know it's not my sound card because I just had it replaced by a Sound Blaster Live! 24-bit and this issue still takes place. I don't know if these speakers are somewhat defected or if it's just what they do.
    Any help would be GREATLY appreciated...
    Message Edited by icedog90 on 05-16-2005 07:18 AM

    icedog90 wrote:Hello, I just got the Creative Inspire T5400 5.1 speaker system from Newegg a half a week ago and everything seems to sound really good... except for the fact that when these speakers idle right after a song or loud noise in a game, they will make this really weird noise that's very high in frequency. My parents can't hear it (the older you get, the more hearing loss :S), neither can my sister, but I can and it really distracts me from the good sound coming from these speakers. This doesn't only happen when some loud noise or song finishes, sometimes they'll do it constantly while there is a lot of sound and it really throws you off. I'm not sure how you can describe the noise, I mean, it's high pitch... but the closest I can compare this to is if you have ever heard someone turn on night vision in a game, that screeching noise that goes up is pretty close to what these speakers do. I know it's not my sound card because I just had it replaced by a Sound Blaster Live! 24-bit and this issue still takes place. I don't know if these speakers are somewhat defected or if it's just what they do. Any help would be GREATLY appreciated...
    You are correct, I have exactly the same problem and am doing a second RMA on my T5400 speakers. A bit on the weird side though, when I tip the subwoofer towards me, the sound fades away momentarily. Something internally wrong indeed...
    Message Edited by BDahl on 05-15-2005 06:44 AM

  • Center speaker problems

    Hi, I installed sound blaster live 5.1 to my computer yesterday and hooked up the altec lansing surround sound 5.1. The speaker test passed on all of the speakers but the center speaker does not play music even though it passed the test. What is the problem? Please help. Thank you, Larry

    I purchased my Creative 5.1 Inspire 5200 speaker system alongwith SoundBlaster Live! 5.1 sound card about a week ago.
    However, due to some reason, I have not been able to obtain any sound from the Center Satellite Speaker while playing music. The speaker works fine in the speaker test but does not produce any sound while playing music. I have looked around for any concerned options but haven't located any that might solve the problem.
    So I guess my problem is pretty much the same as lkma9's. Let's hope some smaritan drops by to solve our miseries

  • Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

  • Rear speaker problem

    Hi, i have 4 speakers and a subwoofer. Mainboard is asrock xtreme4 which come with realtek hd audio.
    You may know the famous "rear speaker problem" on windows products. While speaker test just works fine, rear speaker never works on media player, winamp etc...
    But recently it become really interesting because, that rear speakers works fine on firefox browser 22.0. So it gave me hope the solve this problem once and for all.
    Right now, when i listening any thing on firefox, rear speakers works fine. But not working on Chrome and other stuff.
    What firefox 22.0 made to work speakers fine?

    hey have you tryed connecting other speakers to the bad connected one and see if it was not a bad channel? if so then let me know and I will look in to this problem more and try my best to get you the answers your looking for ok

  • Solved my scratchy speaker problem. Do a hard reset. Home,sleep button. Hold till screen goes blank.

    Had a scratchy speaker problem and strange sounds when ipad shutdown. Hold the home button and sleep button till screen goes blank. Turn on after a minute or two. Fixed it on ipad 4. Good luck.

    Apple replaced with new phone under warranty, had to haggle a little to get that done.  Set up new one as a new phone, not from a backup, so as to not transfer any possible software issues to the new one, still re-setting up everything...      all was good for the first week or so, now this one does the same thing, plus a new issue.    While on calls the screen will go black, and the absolute only way to get control of the phone again is to hold both buttons down until the apple logo appears and phone restarts. Additionally, sometimes it will now become unanswerable when receiving a phone call, has only happened on vibrate, but it will go into a continuous vibrating mode and no way to answer the call or stop it, other than the two button restart.  Does it on normal calling, and on 4g lte calling setting (verizon).

  • Inspire T5400. Lost Volume Control. Any way to "hack" the input for the Volume Control?

    Hey. I've lost the volume control for my Inspire T5400. Is it possible in any way to "hack" it to make the volume on the loudest? I dont have to be able to lower the volume.. I'll just do that on my pc.
    Thanks
    SpiXe - And sorry for my english ^^,

    prvs wrote:
    Dear Altenbach,
    The VI that you have posted in (Max8Discard.vi) in Limiting Input String Length
    limits the entry of string control to required length but it doesnt limit the entry of special characters.
    If you have any simple way to do the same it will be very helpful
    Thanks in advance...!!!
    Regards,
    Praveen PRVS
    Just change the check after the Lexical Class function.  If you just want numbers and letters, then use the In Range & Coerce function to check for class numbers 3 through 5.  Play around with the logic some more until you get what you need (I'm thinking that AND should be an OR).
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Nokia N93 Speaker Problem Please help!

    Hello guys, i have bought a n93 because my Qtek 8300 was damaged severly, alright so i get the n93 and i cant use it becuase of a big problem. When i make calls on the recieivng side of when ppl c all there is a flickering noise (the speaker where ppl talk to you) or when i record video the noise happens again. Im so fraustraited becuase i cant use it to make calls only on the headset, so im sure this is speaker problem right? Someone please help me and tlel me what i can do.

    29-Mar-2008 09:06 PM
    bigboy_245 wrote:
    Hello guys, i have bought a n93 because my Qtek 8300 was damaged severly, alright so i get the n93 and i cant use it becuase of a big problem. When i make calls on the recieivng side of when ppl c all there is a flickering noise (the speaker where ppl talk to you) or when i record video the noise happens again. Im so fraustraited becuase i cant use it to make calls only on the headset, so im sure this is speaker problem right? Someone please help me and tlel me what i can do.
    Which firmware version you have. To check type*#0000#
    If my post has helped you please click the white star on the right

  • RE: Speaker problems

    I have an iPhone 4S.  I have been having speaker problems for a while now and am slowly realizing when using and doing certain things that my sound is not working.  When I take a video my sound does not work, when I facetime with someone they can't hear me but I can hear them.  When I try and put someone on speaker phone they can't hear me.  I can listen to music and listen to videos from facebook, youtube, etc.  So my question is what could be causing this because I have sound otherwise, I can hear text message sounds, facebook notifications, etc.  Help is appreicated.  Thanks. 

    Hi serena36,
    This sounds more like a microphone issue that a problem with your speaker. I would suggest using the steps in this article to troubleshoot -
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My iphone has auto speaker problem ,it pronounces everythin i touch n also auto speak

    my iphone 4 has auto speaker problem it pronounces everythin what i touch in the desktop.and also auto speaks like when i switch on it tells time........ after some sec if i left it it says sleep alot....

    It sounds like you need to turn VoiceOver off, see this Apple doc -> iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • I got speaker problem on iPad 2 once after I upgraded to iOS 7.3. Any idea? Please help

    I got speaker problem once I upgraded my iPad into iOS 7.0.3. Any idea? Please help.

    Go into the settings and reset all settings. See if that helps.

  • Creative Inspire 5.1 Digital 5700 center speaker problem

    I have a SB Audigy sound card, here is my problem when i run the speaker test they all work and when i put effect on CMSS Movie or CMSS Music all the speakers work but when i put in Fourpoint 5. Din and run lets say EAX Goldmine, lisen to music or play a game i dont get sound from the Center speaker. All the other work just fine and sound come from the right direction exept if there is sound in front of me i cant hear it, any help would be appreciated. Thanks!
    JL

    Jlt_230
    The Fourpoint/5. DIN mode acts as a bypass mode for discrete multichannel Digital DIN and 4 channel Analog signals from various sources and passes these signals direct to each speaker output. Therefore when playing back non Dolby Digital 5. (AC3) signals such as Stereo, you will only get Stereo (Left & Right channel) signals without the center signal.
    You should be able to get the center channel when you playback Dolby Digital 5. (AC3) sources.
    Jason

Maybe you are looking for

  • Should I sell my iPod Touch 4th Gen.? If so, how much should I sell it for?

    Hi, there! I'm new to this Apple Discussions page, so greetings to all. So I am thinking of selling my iPod Touch 4th Generation in order to buy the iPod Touch 5th Generation. My iPod has 16 gigabytes; I'm planning on getting the 5th Gen. 16gb as a r

  • Windows 7 and ConsoleOne for GroupWise

    Scenario: GroupWise 703 on NetWare, ConsoleOne from GW 8 SP1 w/ GW 703 snapins, Windows 7 64bit w/ Novell client 2 sp1 Problem: When you connect to a domain in the GroupWise view, that wpdomain.db is opened on that server and does not show "locked".

  • How to group data from two tables ?

    Hello, I have two tables and i want to group data from them but two table not linked. Table TEXT_IN : ID_IN (primary_key), DATE_IN Table TEXT_OUT : ID_OUT(primary_key),DATE_OUT Example : Result :Group Date and Order by IN,OUT And It seems a bit confu

  • HTML select size attribute on iPad

    The HTML select size attribute specifies the number of visible options in a drop-down list. The example below will show all four entries on the drop-down, however nothing was shown in iPad. <html> <body> <select size="4"> <option value="volvo">Volvo<

  • How can I organize folders?

    Hello, First of all sorry about my poor english. With Iphoto 09 I imported the photographs and i could put the same name in the event and in the folder in the Photo Library, I had this: iPhoto Library > Originals > 2010 (Year) > Name of the event. No